FASTPATH-QOS-ACL-MIB
AI MIB Summary
The FASTPATH-QOS-ACL-MIB module enables the monitoring and management of Quality of Service (QoS) policies and Access Control List (ACL) configurations on Brocade (now Extreme Networks) FastPath switching platforms. It provides granular visibility into ACL rule statistics, including packet and byte counters, match rates, and policy enforcement states to facilitate traffic prioritization and security policy auditing.
The MIB definitions for Quality of Service - ACL Flex package.
Main OID:
fastPathQOSACL.1.3.6.1.4.1.4413.1.1.3.2
115
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
115 total| Object Name |
|---|
fastPathQOSACLThe MIB definitions for Quality of Service - ACL Flex package. MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.3.2 |
aclNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.3.2.0 |
aclTrapRuleLogEventThis trap is generated on a periodic basis to indicate that an
ACL rule configured for logging was actively used by hardware to
take action on one or more packets. The aclTrapRuleHitCount denotes
the number of times this rule was hit during the most recent logging
interval. ACL Trap generation requires that the aclTrapFlag object
be set to enable(1). NOTIFICATION-TYPE .1.3.6.1.4.1.4413.1.1.3.2.0.1 |
aclTableA table of ACL instances. SEQUENCE OF AclEntry .1.3.6.1.4.1.4413.1.1.3.2.1 |
aclEntry AclEntry .1.3.6.1.4.1.4413.1.1.3.2.1.1 |
aclIndexThe IP ACL table index this instance is associated with. Integer32 .1.3.6.1.4.1.4413.1.1.3.2.1.1.1 |
aclNameThe name of this IPv4 ACL entry, which must consist of
1 to 31 alphanumeric characters and uniquely identify
this IPv4 ACL. An existing IPv4 ACL can be renamed by
setting this object to a new name.
This object must be set to complete a new IPv4 ACL
row instance.rw DisplayString .1.3.6.1.4.1.4413.1.1.3.2.1.1.2 |
aclStatusStatus of this instance. Entries can not be deleted until all rows in
the aclIfTable and aclRuleTable with corresponding values of aclIndex
have been deleted.
active(1) - this ACL instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.1.1.3 |
aclIfTableA table of ACL interface instances per direction. SEQUENCE OF AclIfEntry .1.3.6.1.4.1.4413.1.1.3.2.2 |
aclIfEntry AclIfEntry .1.3.6.1.4.1.4413.1.1.3.2.2.1 |
aclIfIndexThe interface to which this ACL instance applies. Integer32 .1.3.6.1.4.1.4413.1.1.3.2.2.1.1 |
aclIfDirectionThe interface direction to which this ACL instance applies. Enumeration .1.3.6.1.4.1.4413.1.1.3.2.2.1.2 |
aclIfSequenceThe relative evaluation sequence of this ACL for this
interface and direction. When multiple ACLs are allowed
for a given interface and direction, the sequence number
determines the order in which the list of ACLs are evaluated,
with lower sequence numbers given higher precedence. The
sequence number value is arbitrary, but must be a unique
non-zero value for a given interface and direction.
Setting this object to an existing sequence number
value for a given interface and direction causes the
ACL corresponding to that value to be replaced with
this ACL. Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.2.1.3 |
aclIfAclTypeThe type of this ACL, which is used to interpret the
aclIfId object value. Each type of ACL uses its own
numbering scheme for identification (see aclIfAclId object
for details).
The aclIfAclId object must be specified along with this
object. Enumeration .1.3.6.1.4.1.4413.1.1.3.2.2.1.4 |
aclIfAclIdThe ACL identifier value, which is interpreted based on
the aclIfType object.
For the IP ACLs, the actual ACL number is its identifier
as follows: IP standard ranges from 1-99, while
IP extended ranges from 100-199. Here, aclIfAclId represents
aclIndex.
The MAC ACLs use an internally-generated index value
that is assigned when the ACL is created.Here, aclIfAclId
represents aclMacIndex.
The IPv6 ACLs use an internally-generated index value
that is assigned when the ACL is created.Here, aclVlanAclId
represents aclIpv6Index.
The aclIfType object must be specified along with
this object. Integer32 .1.3.6.1.4.1.4413.1.1.3.2.2.1.5 |
aclIfStatusStatus of this instance.
active(1) - this ACL interface instance is active
createAndGo(4) - set to this value to assign an ACL to an interface and direction
destroy(6) - set to this value to remove an ACL from an interface and directionrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.2.1.6 |
aclRuleTableA table of IP ACL Rule instances. SEQUENCE OF AclRuleEntry .1.3.6.1.4.1.4413.1.1.3.2.4 |
aclRuleEntryA table of IP ACL Classification Rules AclRuleEntry .1.3.6.1.4.1.4413.1.1.3.2.4.1 |
aclRuleIndexThe index of this rule instance within an IP ACL. Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.1 |
aclRuleActionThe type of action this rule should perform.rw Enumeration .1.3.6.1.4.1.4413.1.1.3.2.4.1.2 |
aclRuleProtocolicmp - 1
igmp - 2
ip - 4
tcp - 6
udp - 17
All values from 1 to 255 are valid.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.3 |
aclRuleSrcIpAddressThe Source IP Address used in the ACL Classification.rw IpAddress .1.3.6.1.4.1.4413.1.1.3.2.4.1.4 |
aclRuleSrcIpMaskThe Source IP Mask used in the ACL Classification.
This mask is expressed using wild-card notation,which
is the 1's compliment of traditional Subnet Masks.
Here, the 'Don't care bits' are represented by binary 1's and
'Do care bits' are represented by binary 0's.rw IpAddress .1.3.6.1.4.1.4413.1.1.3.2.4.1.5 |
aclRuleSrcL4PortThe Source Port Number (Layer 4) used in the ACL Classification.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.6 |
aclRuleSrcL4PortRangeStartThe Source Port Number(Layer 4) range start.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.7 |
aclRuleSrcL4PortRangeEndThe Source Port Number(Layer 4) range end.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.8 |
aclRuleDestIpAddressThe Destination IP Address used in the ACL Classification.rw IpAddress .1.3.6.1.4.1.4413.1.1.3.2.4.1.9 |
aclRuleDestIpMaskThe Destination IP Mask used in the ACL Classification.
This mask is expressed using wild-card notation,which
is the 1's compliment of traditional Subnet Masks.
Here, the 'Don't care bits' are represented by binary 1's and
'Do care bits' are represented by binary 0's.rw IpAddress .1.3.6.1.4.1.4413.1.1.3.2.4.1.10 |
aclRuleDestL4PortThe Destination Port (Layer 4) used in ACl classification.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.11 |
aclRuleDestL4PortRangeStartThe Destination Port (Layer 4) starting range used in ACL classification.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.12 |
aclRuleDestL4PortRangeEndThe Destination Port (Layer 4) ending range used in ACL classification.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.13 |
aclRuleIPDSCPThe Differentiated Services Code Point value.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.14 |
aclRuleIpPrecedenceThe Type of Service (TOS) IP Precedence value.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.15 |
aclRuleIpTosBitsThe Type of Service (TOS) Bits value.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.16 |
aclRuleIpTosMaskThe Type of Service (TOS) Mask value.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.17 |
aclRuleStatusStatus of this instance.
active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.4.1.18 |
aclRuleAssignQueueIdQueue identifier to which all inbound packets matching this
ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE 802.1D
specification based on the number of assignable queues in the
system:
1-3 queues: 0
4-7 queues: 1
8 queues: 2
This default assignment is static and is not influenced by
other system configuration changes.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.4.1.19 |
aclRuleRedirectIntfA non-zero value indicates the external ifIndex to which all
inbound packets matching this ACL rule are directed. A
value of zero means packet redirection is not in effect, which
is the default value of this object. Note that packet
redirection and mirroring (aclRuleMirrorIntf object)
are mutually-exclusive rule attributes.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4413.1.1.3.2.4.1.20 |
aclRuleMatchEveryFlag to indicate that the ACL rule is defined to match on every IP packet,
regardless of content.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.4.1.21 |
aclRuleMirrorIntfA non-zero value indicates the external ifIndex to which all
inbound packets matching this ACL rule are copied. A
value of zero means packet mirroring is not in effect, which
is the default value of this object. Note that packet
mirroring and redirection (aclRuleRedirectIntf object)
are mutually-exclusive rule attributes.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4413.1.1.3.2.4.1.22 |
aclRuleLoggingFlag to indicate that the ACL rule is being logged.
A hardware count of the number of times this rule is
hit is reported via the aclTrapRuleLogEvent notification.
This object may be supported for an aclRuleAction
setting of permit(1) and/or deny(2), depending on the
ACL feature capabilities of the device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.4.1.23 |
aclMacGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.3.2.5 |
aclMacIndexNextFreeThis object contains an unused value for the aclMacIndex
to be used when creating a new MAC ACL. A value of zero
zero indicates the ACL table is full.ro Integer32 .1.3.6.1.4.1.4413.1.1.3.2.5.1 |
aclMacTableA table of MAC ACL instances. SEQUENCE OF AclMacEntry .1.3.6.1.4.1.4413.1.1.3.2.5.2 |
aclMacEntry AclMacEntry .1.3.6.1.4.1.4413.1.1.3.2.5.2.1 |
aclMacIndexThe MAC ACL table index this instance is associated with.
When creating a new MAC ACL, refer to the aclMacIndexNextFree
object to determine the next available aclMacIndex to use. Integer32 .1.3.6.1.4.1.4413.1.1.3.2.5.2.1.1 |
aclMacNameThe name of this MAC ACL entry, which must consist of
1 to 31 alphanumeric characters and uniquely identify
this MAC ACL. An existing MAC ACL can be renamed by
setting this object to a new name.
This object must be set to complete a new MAC ACL
row instance.rw DisplayString .1.3.6.1.4.1.4413.1.1.3.2.5.2.1.2 |
aclMacStatusStatus of this instance. ACL MAC entries can not be deleted until all rows in
the aclIfTable and aclRuleTable with corresponding values of aclMacIndex
have been deleted.
active(1) - this ACL instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance
The aclMacName object must be set to complete this row instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.5.2.1.3 |
aclMacRuleTableA table of layer 2 MAC ACL Rule instances. SEQUENCE OF AclMacRuleEntry .1.3.6.1.4.1.4413.1.1.3.2.5.3 |
aclMacRuleEntryA table of layer 2 MAC ACL Classification Rules AclMacRuleEntry .1.3.6.1.4.1.4413.1.1.3.2.5.3.1 |
aclMacRuleIndexThe index of this rule instance within an MAC ACL. Integer32 .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.1 |
aclMacRuleActionThe type of action this MAC ACL rule should perform.rw Enumeration .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.2 |
aclMacRuleCosThe Class of Service (COS) used in the MAC ACL Classification.
This is the three-bit user priority field in the 802.1Q tag
header of a tagged Ethernet frame. For frames containing a
double VLAN tag, this field is located in the first/outer tag.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.3 |
aclMacRuleCos2The Secondary Class of Service (COS2) used in the MAC ACL Classification.
This is the three-bit user priority field in the second/inner 802.1Q
tag header of a double VLAN tagged Ethernet frame.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.4 |
aclMacRuleDestMacAddrThe Destination MAC address used in the MAC ACL Classification.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.5 |
aclMacRuleDestMacMaskThe Destination MAC address mask used in the MAC ACL Classification.
This mask value identifies the portion of the aclMacRuleDestMacAddr
that is compared against a packet. A non-contiguous mask value is
permitted.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.6 |
aclMacRuleEtypeKeyThe Ethertype keyword used in the MAC ACL Classification.
A keyword of custom(1) requires that the aclMacRuleEtypeValue
object also be set.rw Enumeration .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.7 |
aclMacRuleEtypeValueThe Ethertype custom value used in the MAC ACL Classification.
This object is only valid if the aclMacRuleEtypeKey is set to
custom(1). The allowed value for this object is 0x0600 to 0xFFFF
(1536 to 65535).rw EtypeValue .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.8 |
aclMacRuleSrcMacAddrThe Source MAC address used in the MAC ACL Classification.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.9 |
aclMacRuleSrcMacMaskThe Source MAC address mask used in the MAC ACL Classification.
This mask value identifies the portion of the aclMacRuleSrcMacAddr
that is compared against a packet. A non-contiguous mask value is
permitted.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.10 |
aclMacRuleVlanIdThe VLAN ID value used in the MAC ACL Classification.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.11 |
aclMacRuleVlanIdRangeStartThe VLAN ID range start value used in the MAC ACL Classification.
Setting this value greater than the current aclMacRuleVlanIdRangeEnd
changes the VLAN ID range end to the same value as the range start.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.12 |
aclMacRuleVlanIdRangeEndThe VLAN ID range end value used in the MAC ACL Classification.
Setting this value less than the current aclMacRuleVlanIdRangeStart
changes the VLAN ID range start to the same value as the range end.
The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer tag of a double VLAN tagged frame.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.13 |
aclMacRuleVlanId2The Secondary VLAN ID value used in the MAC ACL Classification.
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet
frame.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.14 |
aclMacRuleVlanId2RangeStartThe Secondary VLAN ID range start value used in the MAC ACL Classification.
Setting this value greater than the current aclMacRuleVlanId2RangeEnd
changes the Secondary VLAN ID range end to the same value as the range start.
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet
frame.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.15 |
aclMacRuleVlanId2RangeEndThe Secondary VLAN ID range end value used in the MAC ACL Classification.
Setting this value less than the current aclMacRuleVlanId2RangeStart
changes the Secondary VLAN ID range start to the same value as the range end.
The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet
frame.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.16 |
aclMacRuleStatusStatus of this instance.
active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.17 |
aclMacRuleAssignQueueIdQueue identifier to which all inbound packets matching this
MAC ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE 802.1D
specification based on the number of assignable queues in the
system:
1-3 queues: 0
4-7 queues: 1
8 queues: 2
This default assignment is static and is not influenced by
other system configuration changes.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.18 |
aclMacRuleRedirectIntfA non-zero value indicates the external ifIndex to which all
inbound packets matching this MAC ACL rule are directed. A
value of zero means packet redirection is not in effect, which
is the default value of this object. Note that packet
redirection and mirroring (aclMacRuleMirrorIntf object)
are mutually-exclusive rule attributes.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.19 |
aclMacRuleMatchEveryFlag to indicate that the MAC ACL rule is defined to match all packets,
regardless of Ethertype.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.20 |
aclMacRuleMirrorIntfA non-zero value indicates the external ifIndex to which all
inbound packets matching this MAC ACL rule are copied. A
value of zero means packet mirroring is not in effect, which
is the default value of this object. Note that packet
mirroring and redirection (aclMacRuleRedirectIntf object)
are mutually-exclusive rule attributes.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.21 |
aclMacRuleLoggingFlag to indicate that the ACL rule is being logged.
A hardware count of the number of times this rule is
hit is reported via the aclTrapRuleLogEvent notification.
This object may be supported for an aclMacRuleAction
setting of permit(1) and/or deny(2), depending on the
ACL feature capabilities of the device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.5.3.1.22 |
aclLoggingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.3.2.9 |
aclTrapRuleIndexThe index of an ACL rule instance.
Used by aclTrapRuleLogEvent trap.ro Integer32 .1.3.6.1.4.1.4413.1.1.3.2.9.2 |
aclTrapRuleActionThe type of action this rule should perform, either
permit(1) or deny(2).
Used by aclTrapRuleLogEvent trap.ro Enumeration .1.3.6.1.4.1.4413.1.1.3.2.9.3 |
aclTrapRuleHitCountNumber of times the ACL rule was hit during the most
recent logging interval. Used by aclTrapRuleLogEvent trap.ro Counter64 .1.3.6.1.4.1.4413.1.1.3.2.9.4 |
aclTrapFlagACL Trap Flag - Enables or disables ACL trap generation.
When this value is set to enable(1), ACL traps are
sent from the switch when they occur.rw Enumeration .1.3.6.1.4.1.4413.1.1.3.2.9.5 |
aclIpv6IndexNextFreeThis object contains an unused value for the aclIPv6Index
to be used when creating a new IPv6 ACL. A value of zero
zero indicates the ACL table is full.ro Integer32 .1.3.6.1.4.1.4413.1.1.3.2.10 |
aclIpv6TableA table of Ipv6 ACL instances. SEQUENCE OF AclIpv6Entry .1.3.6.1.4.1.4413.1.1.3.2.11 |
aclIpv6Entry AclIpv6Entry .1.3.6.1.4.1.4413.1.1.3.2.11.1 |
aclIpv6IndexThe IPv6 ACL table index this instance is associated with.
When creating a new IPv6 ACL, refer to the aclIPv6IndexNextFree
object to determine the next available aclIpv6Index to use. Integer32 .1.3.6.1.4.1.4413.1.1.3.2.11.1.1 |
aclIpv6NameThe name of this IPv6 ACL entry, which must consist of
1 to 31 alphanumeric characters and uniquely identify
this IPv6 ACL. An existing IPv6 ACL can be renamed by
setting this object to a new name.
This object must be set to complete a new IPv6 ACL
row instance.rw DisplayString .1.3.6.1.4.1.4413.1.1.3.2.11.1.2 |
aclIpv6StatusStatus of this instance.
active(1) - this ACL instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance
The aclMacName object must be set to complete this row instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.11.1.3 |
aclIpv6RuleTableA table of IPv6 ACL Rule instances. SEQUENCE OF AclIpv6RuleEntry .1.3.6.1.4.1.4413.1.1.3.2.12 |
aclIpv6RuleEntryA table of IPv6 ACL Classification Rules AclIpv6RuleEntry .1.3.6.1.4.1.4413.1.1.3.2.12.1 |
aclIpv6RuleIndexThe index of this rule instance within an IPv6 ACL. Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.1 |
aclIpv6RuleActionThe type of action this IPv6 ACL rule should perform.rw Enumeration .1.3.6.1.4.1.4413.1.1.3.2.12.1.2 |
aclIpv6RuleLoggingFlag to indicate that the ACL rule is being logged.
A hardware count of the number of times this rule is
hit is reported via the aclTrapRuleLogEvent notification.
This object may be supported for an aclIPv6RuleAction
setting of permit(1) and/or deny(2), depending on the
ACL feature capabilities of the device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.12.1.3 |
aclIpv6RuleAssignQueueIdQueue identifier to which all inbound packets matching this
ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE 802.1D
specification based on the number of assignable queues in the
system:
1-3 queues: 0
4-7 queues: 1
8 queues: 2
This default assignment is static and is not influenced by
other system configuration changes.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.4 |
aclIpv6RuleRedirectIntfA non-zero value indicates the external ifIndex to which all
inbound packets matching this Ipv6 ACL rule are directed. A
value of zero means packet redirection is not in effect, which
is the default value of this object. Note that packet
redirection and mirroring (aclIpv6RuleMirrorIntf object)
are mutually-exclusive rule attributes.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4413.1.1.3.2.12.1.5 |
aclIpv6RuleMirrorIntfA non-zero value indicates the external ifIndex to which all
inbound packets matching this IPv6 ACL rule are copied. A
value of zero means packet mirroring is not in effect, which
is the default value of this object. Note that packet
mirroring and redirection (aclIpv6RuleRedirectIntf object)
are mutually-exclusive rule attributes.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.4413.1.1.3.2.12.1.6 |
aclIpv6RuleMatchEveryFlag to indicate that the ACL rule is defined to match on every IP packet,
regardless of content.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.12.1.7 |
aclIpv6RuleProtocolicmp - 1
igmp - 2
ip - 4
tcp - 6
udp - 17
All values from 1 to 255 are valid.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.8 |
aclIpv6RuleSrcL4PortThe Source Port Number (Layer 4) used in the ACL Classification.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.9 |
aclIpv6RuleSrcL4PortRangeStartThe Source Port Number(Layer 4) range start.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.10 |
aclIpv6RuleSrcL4PortRangeEndThe Source Port Number(Layer 4) range end.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.11 |
aclIpv6RuleDestL4PortThe Destination Port (Layer 4) used in ACl classification.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.12 |
aclIpv6RuleDestL4PortRangeStartThe Destination Port (Layer 4) starting range used in ACL classification.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.13 |
aclIpv6RuleDestL4PortRangeEndThe Destination Port (Layer 4) ending range used in ACL classification.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.14 |
aclIpv6RuleStatusStatus of this instance.
active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.12.1.15 |
aclIpv6RuleFlowLabelFlow label is 20-bit number that is unique to an IPv6 packet, used by end
stations to signify quality-of-service handling in routers.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.16 |
aclIpv6RuleIPDSCPThe Differentiated Services Code Point value.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.17 |
aclRuleSrcIpv6PrefixThe Ipv6 Prefix Address configured on the Service Port.rw Ipv6AddressPrefix .1.3.6.1.4.1.4413.1.1.3.2.12.1.18 |
aclRuleSrcIpv6PrefixLengthThe Prefix Length.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.19 |
aclRuleDstIpv6PrefixThe Ipv6 Prefix Address configured on the Service Port.rw Ipv6AddressPrefix .1.3.6.1.4.1.4413.1.1.3.2.12.1.20 |
aclRuleDstIpv6PrefixLengthThe Prefix Length.rw Integer32 .1.3.6.1.4.1.4413.1.1.3.2.12.1.21 |
aclVlanTableA table of ACL VLAN instances per direction. SEQUENCE OF AclVlanEntry .1.3.6.1.4.1.4413.1.1.3.2.13 |
aclVlanEntry AclVlanEntry .1.3.6.1.4.1.4413.1.1.3.2.13.1 |
aclVlanIndexThe Vlan to which this ACL instance applies. Integer32 .1.3.6.1.4.1.4413.1.1.3.2.13.1.1 |
aclVlanDirectionThe Vlan direction to which this ACL instance applies. Enumeration .1.3.6.1.4.1.4413.1.1.3.2.13.1.2 |
aclVlanSequenceThe relative evaluation sequence of this ACL for this
Vlan and direction. When multiple ACLs are allowed
for a given Vlan and direction, the sequence number
determines the order in which the list of ACLs are evaluated,
with lower sequence numbers given higher precedence. The
sequence number value is arbitrary, but must be a unique
non-zero value for a given Vlan and direction.
Setting this object to an existing sequence number
value for a given Vlan and direction causes the
ACL corresponding to that value to be replaced with
this ACL. Unsigned32 .1.3.6.1.4.1.4413.1.1.3.2.13.1.3 |
aclVlanAclTypeThe type of this ACL, which is used to interpret the
aclVlanId object value. Each type of ACL uses its own
numbering scheme for identification (see aclVlanAclId object
for details).
The aclVlanAclId object must be specified along with this
object. Enumeration .1.3.6.1.4.1.4413.1.1.3.2.13.1.4 |
aclVlanAclIdThe ACL identifier value, which is interpreted based on
the aclVlanType object.
For the IP ACLs, the actual ACL number is its identifier
as follows: IP standard ranges from 1-99, while
IP extended ranges from 100-199. Here, aclVlanAclId represents
aclIndex.
The MAC ACLs use an internally-generated index value
that is assigned when the ACL is created. Here, aclVlanAclId
represents aclMacIndex.
The IPv6 ACLs use an internally-generated index value
that is assigned when the ACL is created.Here, aclVlanAclId
represents aclIpv6Index.
The aclVlanType object must be specified along with
this object. Integer32 .1.3.6.1.4.1.4413.1.1.3.2.13.1.5 |
aclVlanStatusStatus of this instance.
active(1) - this ACL Vlan instance is active
createAndGo(4) - set to this value to assign an ACL to a Vlan and direction
destroy(6) - set to this value to remove an ACL from a Vlan and directionrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.2.13.1.6 |
aclNamedIpv4IndexNextFreeThis object contains an unused value for the aclIndex
to be used when creating a new named IPv4 ACL. A value of zero
zero indicates the ACL table is full.ro Integer32 .1.3.6.1.4.1.4413.1.1.3.2.14 |