FASTPATH-OUTBOUNDTELNET-PRIVATE-MIB
The FASTPATH-OUTBOUNDTELNET-PRIVATE-MIB provides vendor-specific monitoring for outbound Telnet sessions on Broadcom FastPath hardware, exposing private counters and status metrics for Telnet traffic egress. This module enables granular visibility into outbound Telnet connection states, session counts, and protocol-specific error statistics on Broadcom network appliances.
Imported Objects
Objects
5 total| Object Name |
|---|
fastPathOutboundTelnetPrivateThe Broadcom Private MIB for FASTPATH Outbound Telnet MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.19 |
agentOutboundTelnetGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.19.1 |
agentOutboundTelnetAdminModeAdmin-mode of the Outbound Telnet.rw Enumeration .1.3.6.1.4.1.4413.1.1.19.1.1 |
agentOutboundTelnetMaxNoOfSessionsThe maximum no. of Outbound Telnet sessions allowed.rw INTEGER .1.3.6.1.4.1.4413.1.1.19.1.2 |
agentOutboundTelnetTimeoutThe login inactivity timeout value for Outbound Telnet.rw INTEGER .1.3.6.1.4.1.4413.1.1.19.1.3 |
More MIBs from Broadcom
Browse all BroadcomMIBs →SNMP MIB module
SNMP MIB module
The FASTPATH-ROUTING-MIB provides vendor-specific SNMP access to monitor and manage routing table entries, forwarding states, and interface statistics on Broadcom-based FastPath switching platforms. It exposes critical operational metrics including active route counts, protocol state transitions, and packet forwarding counters essential for troubleshooting Layer 3 forwarding performance on these proprietary hardware architectures.
The FASTPATH-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) policies, including traffic classification, marking, and queuing parameters, on Netgear FastPath-based networking hardware. This private module provides vendor-specific access to internal QoS state variables and counters that are not exposed in standard IETF DiffServ MIBs.
The EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) parameters, including traffic classification, queuing, and scheduling policies, on Ubiquiti EdgeSwitch hardware. This private MIB extension provides granular visibility into per-interface and per-queue traffic statistics and policy enforcement states not covered by standard DiffServ MIBs.
Standard SNMP MIB module defining data structures for QUANTA-LB6M-REF-MIB.