FASTPATH-MULTICAST-MIB
The FASTPATH-MULTICAST-MIB provides management interfaces for monitoring and configuring multicast routing protocols and session states on Brocade (formerly Foundry) FastPath hardware platforms. It exposes specific metrics including active multicast group counts, forwarding table entries, and protocol-specific counters for PIM, DVMRP, and MOSPF implementations.
Imported Objects
Objects
42 total| Object Name |
|---|
fastPathMulticastThe MIB definitions for Multicast Routing Flex package. MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.4 |
agentMulticastIGMPConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.4.1 |
agentMulticastIGMPAdminModeThis enables or disables IGMP on the system.rw Enumeration .1.3.6.1.4.1.4413.1.1.4.1.1 |
agentMulticastIGMPInterfaceTableProvides Per-Interface configuration of IGMP.obsolete SEQUENCE OF AgentMulticastIGMPInterfaceEntry .1.3.6.1.4.1.4413.1.1.4.1.2 |
agentMulticastIGMPInterfaceEntryInformation about a table entry.obsolete AgentMulticastIGMPInterfaceEntry .1.3.6.1.4.1.4413.1.1.4.1.2.1 |
agentMulticastIGMPInterfaceIfIndexIdentifies the external interface number.roobsolete Integer32 .1.3.6.1.4.1.4413.1.1.4.1.2.1.1 |
agentMulticastIGMPInterfaceAdminModeThis enables or disables IGMP on this interface.rwobsolete Enumeration .1.3.6.1.4.1.4413.1.1.4.1.2.1.2 |
agentMulticastPIMConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.4.2 |
agentMulticastPIMConfigModeThis controls which PIM mode configuration the PIM-MIB displays.rwobsolete Enumeration .1.3.6.1.4.1.4413.1.1.4.2.1 |
agentMulticastPIMSMConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.4.3 |
agentMulticastPIMSMAdminModeThis enables or disables PIM Sparse Mode on the system.rw Enumeration .1.3.6.1.4.1.4413.1.1.4.3.1 |
agentMulticastPIMSMDataThresholdRateSpecifies the minimum rate in Kbits/sec for the last hop router to initiate switching to the shortest path.rw Integer32 .1.3.6.1.4.1.4413.1.1.4.3.2 |
agentMulticastPIMSMRegThresholdRateSpecifies the minimum rate in Kbits/sec for the RP to switch to the shortest path.rw Integer32 .1.3.6.1.4.1.4413.1.1.4.3.3 |
agentMulticastPIMSMStaticRPTableProvides Per-Interface configuration of PIM-SM.obsolete SEQUENCE OF AgentMulticastPIMSMStaticRPEntry .1.3.6.1.4.1.4413.1.1.4.3.4 |
agentMulticastPIMSMStaticRPEntryInformation about a table entry.obsolete AgentMulticastPIMSMStaticRPEntry .1.3.6.1.4.1.4413.1.1.4.3.4.1 |
agentMulticastPIMSMStaticRPIpAddrIP Address of the RP.obsolete IpAddress .1.3.6.1.4.1.4413.1.1.4.3.4.1.1 |
agentMulticastPIMSMStaticRPGroupIpAddrGroup IP Address supported by the RP.obsolete IpAddress .1.3.6.1.4.1.4413.1.1.4.3.4.1.2 |
agentMulticastPIMSMStaticRPGroupIpMaskGroup mask for the group IP Address.obsolete IpAddress .1.3.6.1.4.1.4413.1.1.4.3.4.1.3 |
agentMulticastPIMSMStaticRPStatusStatus of this entry in the Static RP Table. Allowed values are: active(1) - This entry is active destroy(6) - Setting an entry to this value removes the entry from the table.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.4.3.4.1.4 |
agentMulticastPIMSMInterfaceTableProvides Per-Interface configuration of PIM-SM.obsolete SEQUENCE OF AgentMulticastPIMSMInterfaceEntry .1.3.6.1.4.1.4413.1.1.4.3.5 |
agentMulticastPIMSMInterfaceEntryAllows configuration of parameters not provided in the standard PIM-MIB.obsolete AgentMulticastPIMSMInterfaceEntry .1.3.6.1.4.1.4413.1.1.4.3.5.1 |
agentMulticastPIMSMInterfaceIndexRouting Interface associated with this PIM SM configuration entry.obsolete Unsigned32 .1.3.6.1.4.1.4413.1.1.4.3.5.1.1 |
agentMulticastPIMSMInterfaceCBSRHashMaskLengthThe BSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorith for selecting the RP for a particular group.rwobsolete Unsigned32 .1.3.6.1.4.1.4413.1.1.4.3.5.1.2 |
agentMulticastPIMSMInterfaceCRPPreferenceThe preference value for the local interface as a Candidate Rendezvous Point. The value of -1 is used to indicate that the local interface is not a Candidate RP interface.rwobsolete Integer32 (-1|0..255) .1.3.6.1.4.1.4413.1.1.4.3.5.1.3 |
agentMulticastPIMDMConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.4.4 |
agentMulticastPIMDMAdminModeThis enables or disables PIM Dense Mode on the system.rw Enumeration .1.3.6.1.4.1.4413.1.1.4.4.1 |
agentMulticastRoutingConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.4.5 |
agentMulticastRoutingAdminModeThis enables or disables Multicast Routing Mode on the system.rw Enumeration .1.3.6.1.4.1.4413.1.1.4.5.1 |
agentMulticastDVMRPConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.4.6 |
agentMulticastDVMRPAdminModeThis enables or disables DVMRP on the system.rw Enumeration .1.3.6.1.4.1.4413.1.1.4.6.1 |
agentSnmpTrapFlagsConfigGroupMulticast OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.4.7 |
agentSnmpDVMRPTrapFlagThis enables or disables DVMRP Traps on the system.rw Enumeration .1.3.6.1.4.1.4413.1.1.4.7.1 |
agentSnmpPIMTrapFlagThis enables or disables PIM Traps on the system.rw Enumeration .1.3.6.1.4.1.4413.1.1.4.7.2 |
agentIpStaticMRouteTableThe table listing the Static Multicast Route Entries. SEQUENCE OF AgentIpStaticMRouteEntry .1.3.6.1.4.1.4413.1.1.4.8 |
agentIpStaticMRouteEntryInformation about a table entry. AgentIpStaticMRouteEntry .1.3.6.1.4.1.4413.1.1.4.8.1 |
agentIpStaticMRouteSrcAddressTypeThe address type of this Multicast data source. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4413.1.1.4.8.1.1 |
agentIpStaticMRouteSrcIpAddrThe address of the Multicast data source. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4413.1.1.4.8.1.2 |
agentIpStaticMRouteSrcNetMaskThe network mask for the IP address of the Multicast data source. Integer32 .1.3.6.1.4.1.4413.1.1.4.8.1.3 |
agentIpStaticMRouteRpfIpAddrThe RPF Address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4413.1.1.4.8.1.4 |
agentIpStaticMRouteIfIndexThe interface index is valid only for IPv6 and only if RPF address is link-local.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4413.1.1.4.8.1.5 |
agentIpStaticMRoutePreferenceThe preference of this route entry.rw Integer32 .1.3.6.1.4.1.4413.1.1.4.8.1.6 |
agentIpStaticMRouteStatusThe preference of this route entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.4.8.1.7 |
More MIBs from Broadcom
Browse all BroadcomMIBs →SNMP MIB module
SNMP MIB module
The FASTPATH-ROUTING-MIB provides vendor-specific SNMP access to monitor and manage routing table entries, forwarding states, and interface statistics on Broadcom-based FastPath switching platforms. It exposes critical operational metrics including active route counts, protocol state transitions, and packet forwarding counters essential for troubleshooting Layer 3 forwarding performance on these proprietary hardware architectures.
The FASTPATH-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) policies, including traffic classification, marking, and queuing parameters, on Netgear FastPath-based networking hardware. This private module provides vendor-specific access to internal QoS state variables and counters that are not exposed in standard IETF DiffServ MIBs.
The EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) parameters, including traffic classification, queuing, and scheduling policies, on Ubiquiti EdgeSwitch hardware. This private MIB extension provides granular visibility into per-interface and per-queue traffic statistics and policy enforcement states not covered by standard DiffServ MIBs.
Standard SNMP MIB module defining data structures for QUANTA-LB6M-REF-MIB.