FASTPATH-MGMT-SECURITY-MIB
The FASTPATH-MGMT-SECURITY-MIB enables monitoring and configuration of security parameters, including firewall rules, intrusion detection system states, and access control lists on NETGEAR FastPath hardware platforms. This module provides specific OID access to security event logs, threat detection counters, and authentication session metrics for network defense analysis.
Imported Objects
Objects
21 total| Object Name |
|---|
fastPathMgmtSecurityThe NETGEAR Private MIB for FastPath Security MODULE-IDENTITY .1.3.6.1.4.1.4526.10.11 |
agentSSLConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.11.1 |
agentSSLAdminModeConfigures whether the SSL service is enabled on this switch. The
default value is disable(2).rw Enumeration .1.3.6.1.4.1.4526.10.11.1.1 |
agentSSLSecurePortConfigures the port the SSL service will respond on. The default
value is 443.rw Integer32 .1.3.6.1.4.1.4526.10.11.1.2 |
agentSSLProtocolLevelConfigures which protocol versions of SSL are enabled on this
switch. The default value is both(3).rw Enumeration .1.3.6.1.4.1.4526.10.11.1.3 |
agentSSLMaxSessionsConfigures the maximum number of allowable SSL sessions. The default
value is 16.rw Integer32 .1.3.6.1.4.1.4526.10.11.1.4 |
agentSSLHardTimeoutConfigures the hard timeout for SSL sessions in hours. The default
value is 24 hours.rw Integer32 .1.3.6.1.4.1.4526.10.11.1.5 |
agentSSLSoftTimeoutConfigures the soft (activity) timeout for SSL sessions in minutes.
The default value is 5 minutes.rw Integer32 .1.3.6.1.4.1.4526.10.11.1.6 |
agentSSLCertificatePresentBoolean value indicating whether SSL certificate files exist on the device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.10.11.1.7 |
agentSSLCertificateControlControls certificate generation and deletion. Always returns noop(1).rw Enumeration .1.3.6.1.4.1.4526.10.11.1.8 |
agentSSLCertificateGenerationStatusIndicates whether certificate files are currently being generated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4526.10.11.1.9 |
agentSSHConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.11.2 |
agentSSHAdminModeConfigures whether the SSH service is enabled on this switch. The
default value is disable(2).rw Enumeration .1.3.6.1.4.1.4526.10.11.2.1 |
agentSSHProtocolLevelConfigures which protocol versions of SSH are enabled on this
switch. The default value is both(3).rw Enumeration .1.3.6.1.4.1.4526.10.11.2.2 |
agentSSHSessionsCountCurrent number of active SSH sessions on this switch.ro Integer32 .1.3.6.1.4.1.4526.10.11.2.3 |
agentSSHMaxSessionsCountMax number of SSH sessions permitted on this switch.rw Integer32 .1.3.6.1.4.1.4526.10.11.2.4 |
agentSSHSessionTimeoutssh idle timeout value for this switch im minutes.rw Integer32 .1.3.6.1.4.1.4526.10.11.2.5 |
agentSSHKeysPresentIndicates what key files are present on the device, if any.ro Enumeration .1.3.6.1.4.1.4526.10.11.2.6 |
agentSSHKeyGenerationStatusIndicates what key files are currently being generated, if any.ro Enumeration .1.3.6.1.4.1.4526.10.11.2.7 |
agentSSHRSAKeyControlControls RSA key generation and deletion. Always returns noop(1).rw Enumeration .1.3.6.1.4.1.4526.10.11.2.8 |
agentSSHDSAKeyControlControls DSA key generation and deletion. Always returns noop(1).rw Enumeration .1.3.6.1.4.1.4526.10.11.2.9 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.