FASTPATH-IPV6-TUNNEL-MIB
AI MIB Summary
The FASTPATH-IPV6-TUNNEL-MIB enables monitoring and management of IPv6 tunnel interfaces and associated traffic statistics on NETGEAR FastPath hardware platforms. This module provides access to specific metrics including tunnel interface status, packet counters, error rates, and tunnel configuration parameters for IPv6 over IPv4 or IPv6 over IPv6 encapsulation scenarios.
The NETGEAR Private MIB for FastPath IPV6 Tunnel
Main OID:
fastPathIpv6Tunnel.1.3.6.1.4.1.4526.10.27
17
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
fastPathIpv6TunnelThe NETGEAR Private MIB for FastPath IPV6 Tunnel MODULE-IDENTITY .1.3.6.1.4.1.4526.10.27 |
agentTunnelIPV6Group OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.27.1 |
agentTunnelIPV6TableA summary table of the IPV6 tunnel instances SEQUENCE OF AgentTunnelIPV6Entry .1.3.6.1.4.1.4526.10.27.1.1 |
agentTunnelIPV6Entry AgentTunnelIPV6Entry .1.3.6.1.4.1.4526.10.27.1.1.1 |
agentTunnelIDThe tunnel ID is associated with Internal Interface number
which is generated when we create a tunnel, and is used
to configure the tunnel. Integer32 .1.3.6.1.4.1.4526.10.27.1.1.1.1 |
agentTunnelIfIndexThe external interface of the tunnel is associted with
internal interface. The tunnel ID associated with
Internal Interface number is generated when we create a
tunnel, which is used to configure the tunnel.ro Integer32 .1.3.6.1.4.1.4526.10.27.1.1.1.2 |
agentTunnelModeSpecifies the type of Tunnel either undefined, 6over4 or 6to4.
The default value is undefined. It supports 6over4
which supports an assigned IPV6 address, an IPV4 address
is not allowed. For this mode, the tunnel source and
tunnel destination must be IPV4 address. For 6to4 tunnel,
the tunnel source must be IPv4 address. Tunnel destination
should not be set. The first 48-bits of the IPv4 address assigned
to the 6to4 tunnel should be of the format 2002:sourceIpv4address.rw Enumeration .1.3.6.1.4.1.4526.10.27.1.1.1.3 |
agentTunnelLocalIP4AddrThe address of the Local endpoint of the tunnel i.e. the
source address used in the outer IP header. It is 0.0.0.0
if unknown or the tunnel is over IPv6.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.27.1.1.1.4 |
agentTunnelRemoteIP4AddrThe address of the Remote endpoint of the tunnel i.e.
the destination address used in the outer IP header. It is
0.0.0.0 if the tunnel is unknown or IPv6 address, or not
a point to point linkrw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.27.1.1.1.5 |
agentTunnelLocalIfIndexSpecifies the interface for IPv6 Tunnel Sourcerw Integer32 .1.3.6.1.4.1.4526.10.27.1.1.1.6 |
agentTunnelStatusStatus of this instance.Row can be added or deleted
by setting the value to createAndGo/destroy
active(1) - this Tunnel instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.27.1.1.1.7 |
agentTunnelIcmpUnreachableModeSpecifies the Mode of Sending ICMPv6 Unreachable
messages on this tunnel interface.rw Enumeration .1.3.6.1.4.1.4526.10.27.1.1.1.8 |
agentTunnelIPV6PrefixTableA table of the IPV6 prefixes associated with tunnel instances SEQUENCE OF AgentTunnelIPV6PrefixEntry .1.3.6.1.4.1.4526.10.27.1.2 |
agentTunnelIPV6PrefixEntry AgentTunnelIPV6PrefixEntry .1.3.6.1.4.1.4526.10.27.1.2.1 |
agentTunnelIPV6PrefixPrefixThe prefix associated with the tunnel interface. The data type
is used to model the IPV6 address. It is a binary string
of 16 octects in network byte-order. It specifies the IP
address of tunnel which will be in IPV6 Format, generated
using internal interface number. Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.4526.10.27.1.2.1.1 |
agentTunnelIPV6PrefixPrefixLenThe length of the prefix (in bits). InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.27.1.2.1.2 |
agentTunnelIPV6PrefixStatusStatus of this instance.Row can be added or deleted
by setting the value to createAndGo/destroy
active(1) - this Tunnel instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.27.1.2.1.3 |