FASTPATH-IPV6-LOOPBACK-MIB
The FASTPATH-IPV6-LOOPBACK-MIB enables NETGEAR FastPath devices to configure and monitor IPv6 loopback interface addresses and their associated operational states. This module provides visibility into specific loopback IP assignments, interface status, and address configuration parameters for IPv6 network segmentation and management.
Imported Objects
Objects
7 total| Object Name |
|---|
fastPathIpv6LoopbackThe NETGEAR Private MIB for FastPath Loopback IPV6 address configuration MODULE-IDENTITY .1.3.6.1.4.1.4526.10.23 |
agentLoopbackIpv6Group OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.23.1 |
agentLoopbackIpv6PrefixTableA table of the Ipv6 prefixes associated with loopback instances SEQUENCE OF AgentLoopbackIpv6PrefixEntry .1.3.6.1.4.1.4526.10.23.1.1 |
agentLoopbackIpv6PrefixEntry AgentLoopbackIpv6PrefixEntry .1.3.6.1.4.1.4526.10.23.1.1.1 |
agentLoopbackIpv6PrefixPrefixThe prefix associated with the loopback interface. The data type
is used to model the Ipv6 address. It is a binary string
of 16 octects in network byte-order. It specifies the IP
address of loopback which will be in Ipv6 Format, generated
using internal interface number. Ipv6AddressPrefix (IPV6-TC) .1.3.6.1.4.1.4526.10.23.1.1.1.1 |
agentLoopbackIpv6PrefixPrefixLenThe length of the prefix (in bits). InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.4526.10.23.1.1.1.2 |
agentLoopbackIpv6PrefixStatusStatus of this instance.Row can be added or deleted
by setting the value to createAndGo/destroy
active(1) - this Loopback instance is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.23.1.1.1.3 |
More MIBs from Netgear
Browse all NetgearMIBs →Standard SNMP MIB module defining data structures for WING-MIB.
The FASTPATH-SWITCHING-MIB enables monitoring and management of Netgear FastPath switching hardware, specifically exposing metrics related to Layer 2 forwarding tables, MAC address aging, VLAN configurations, and port statistics. This private MIB facilitates the tracking of switching plane performance and state changes within Netgear's proprietary FastPath operating environment.
The NETGEAR-SMART-SWITCHING-MIB provides vendor-specific OID extensions for monitoring and managing Layer 2 switching functions, including port status, MAC address tables, VLAN configurations, and spanning tree states on Netgear Smart Switches. This private MIB enables network management systems to retrieve granular operational data and control parameters specific to Netgear's proprietary switching firmware that are not covered by standard IEEE MIBs.
The NETGEAR-SWITCHING-MIB provides vendor-specific extensions for monitoring and managing Layer 2 switching functions on Netgear network switches, including port status, MAC address table entries, and VLAN configurations. It enables SNMP-based retrieval of proprietary switching metrics not covered by standard IETF MIBs to facilitate granular fault isolation and traffic analysis within Netgear-managed infrastructure.
SNMP MIB module
Standard SNMP MIB module defining data structures for GSM7312-SWITCHING-MIB.