FASTPATH-GREENETHERNET-PRIVATE-MIB
AI MIB Summary
The FASTPATH-GREENETHERNET-PRIVATE-MIB provides vendor-specific SNMP access to monitor and configure power-saving Green Ethernet features on Brocade (formerly Foundry) FastPath network switches. This module exposes metrics related to link-level energy efficiency, including port power states, auto-negotiated power reduction status, and active link detection parameters.
The MIB definitions for FASTPATH Green Ethernet Feature.
Main OID:
fastPathGreenEthernet.1.3.6.1.4.1.4526.11.500
33
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
fastPathGreenEthernetThe MIB definitions for FASTPATH Green Ethernet Feature. MODULE-IDENTITY .1.3.6.1.4.1.4526.11.500 |
agentGreenEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.4526.11.500.1 |
agentGreenEthernetTableA table providing configuration of green Ethernet features SEQUENCE OF AgentGreenEthernetEntry .1.3.6.1.4.1.4526.11.500.1.1 |
agentGreenEthernetEntryGreen Ethernet features for a port. AgentGreenEthernetEntry .1.3.6.1.4.1.4526.11.500.1.1.1 |
agentEthernetIntfIndexThis is a unique index for an entry in the agentGreenEthernetTable.
A non-zero value indicates the ifIndex for the corresponding interface
entry in the ifTable. A value of zero represents global configuration,
which in turn causes all interface entries to be updated for a set operation,
or reflects the most recent global setting for a get operation. INTEGER .1.3.6.1.4.1.4526.11.500.1.1.1.1 |
agentGreenEnergyDetectModeEnable or disable Energy Detect Moderw Enumeration .1.3.6.1.4.1.4526.11.500.1.1.1.2 |
agentGreenEnergyDetectOperStatusThis tells if energy detect operational status is currently active or inactive.
The energy detect mode may be administratively enabled, but the operational
status may be inactive.ro Enumeration .1.3.6.1.4.1.4526.11.500.1.1.1.3 |
agentGreenEnergyDetectOperReasonThe energy detect mode may be administratively enabled, but the operational
status may be inactive. The reasons for this may be that the Port is currently
operating in the fiber mode, the Link is up, or the Admin Mode is Down. If
the energy-detect operational status is active, then the reason field shows up
as No energy Detectedro DisplayString .1.3.6.1.4.1.4526.11.500.1.1.1.4 |
agentGreenAutoShortReachModeEnable or disable Auto Short Reach Moderw Enumeration .1.3.6.1.4.1.4526.11.500.1.1.1.5 |
agentGreenForceShortReachModeEnable or disable Force Short Reach Moderw Enumeration .1.3.6.1.4.1.4526.11.500.1.1.1.6 |
agentGreenShortReachOperStatusThis tells if short reach operational status is currently active or inactive.
The short reach mode may be administratively enabled, but the operational
status may be inactive.ro Enumeration .1.3.6.1.4.1.4526.11.500.1.1.1.7 |
agentGreenShortReachOperReasonThe short-reach mode may be administratively enabled, but the
operational status may be inactive. The reason may be that cable is
Long, or the Link may be Down. If the short reach operational status
is active, then the reason field shows up as short cable or Forced.ro DisplayString .1.3.6.1.4.1.4526.11.500.1.1.1.8 |
agentGreenEeeModeEnable or disable Energy Efficient Ethernet Moderw Enumeration .1.3.6.1.4.1.4526.11.500.1.1.1.9 |
agentGreenEeeTxWakeTimeTime for which MAC / switch has to wait to go back to ACTIVE state from LPI state when it receives packet for transmission.rw INTEGER .1.3.6.1.4.1.4526.11.500.1.1.1.10 |
agentGreenEeeTxIdleTimeTime for which condition to move to LPI state is satisfied, at the end of which MAC TX transitions to LPI staterw INTEGER .1.3.6.1.4.1.4526.11.500.1.1.1.11 |
agentGreenCumEnergySavingEstimated Cumulative Energy Saved on this port in (Watt*hours).ro INTEGER .1.3.6.1.4.1.4526.11.500.1.1.1.12 |
agentGreenIntfEeeLpiHistoryTableA table providing configuration and status of green Ethernet Power Saving History feature SEQUENCE OF AgentGreenIntfEeeLpiHistoryEntry .1.3.6.1.4.1.4526.11.500.1.2 |
agentGreenIntfEeeLpiHistoryEntryGreen Ethernet features for a port. AgentGreenIntfEeeLpiHistoryEntry .1.3.6.1.4.1.4526.11.500.1.2.1 |
agentGreenEeeLpiHistoryIntfIndexThis is a unique index for an entry in the agentGreenEthernetTable.
A non-zero value indicates the ifIndex for the corresponding interface
entry in the ifTable. INTEGER .1.3.6.1.4.1.4526.11.500.1.2.1.1 |
agentGreenEeeLpiHistoryIntfSampleIndexThis is a unique index for an entry in the agentGreenEthernetTable.
A non-zero value indicates the sampleIndex for the corresponding sample
entry in the Power Saving History Table. INTEGER .1.3.6.1.4.1.4526.11.500.1.2.1.2 |
agentGreenEeeLpiHistoryIntfSampleTimeTime at which the Sample was collected.ro DisplayString .1.3.6.1.4.1.4526.11.500.1.2.1.3 |
agentGreenEeeLpiHistoryIntfPercentLpiTimePercentage of Time spent in LPI mode on this port since last sample.ro INTEGER .1.3.6.1.4.1.4526.11.500.1.2.1.4 |
agentGreenEeeLpiHistoryIntfPercentLpiTimeTotalPercentage of Time spent in LPI mode on this port since last reset.ro INTEGER .1.3.6.1.4.1.4526.11.500.1.2.1.5 |
agentGreenUnitFeatureTableA table providing configuration and status of green Ethernet Power Saving History feature SEQUENCE OF AgentGreenUnitFeatureEntry .1.3.6.1.4.1.4526.11.500.1.3 |
agentGreenUnitFeatureEntryGreen Ethernet features for a port. AgentGreenUnitFeatureEntry .1.3.6.1.4.1.4526.11.500.1.3.1 |
agentGreenUnitIndexThis is a unique index for an entry in the agentGreenUnitFeatureTable.
A non-zero value indicates the unitIndex for the corresponding unit
entry in the Green Ethernet Unit Feature Table. INTEGER .1.3.6.1.4.1.4526.11.500.1.3.1.1 |
agentGreenFeatureListList of Green Features supported on the given unit which could be one or more of the following:
Energy-Detect (Energy Detect)
Short-Reach (Short Reach)
EEE (Energy Efficient Ethernet)
LPI-History (EEE Low Power Idle History)
LLDP-Cap-Exchg (EEE LLDP Capability Exchange)
Pwr-Usg-Est (Power Usage Estimates).ro DisplayString .1.3.6.1.4.1.4526.11.500.1.3.1.2 |
agentGreenEeeLpiHistoryIntfSampleIntervalInterval at which power consumption data needs to be collected.rw INTEGER .1.3.6.1.4.1.4526.11.500.1.4 |
agentGreenEeeLpiHistoryIntfMaxSamplesMaximum number of samples to keep.rw INTEGER .1.3.6.1.4.1.4526.11.500.1.5 |
agentGreenEeeLpiHistoryLpiTimePerStackPercentage of LPI time per stack.ro INTEGER .1.3.6.1.4.1.4526.11.500.1.6 |
agentGreenStackCumEnergySavingEstimated Cumulative Energy Saving (Watts * Hours) per Stack.ro INTEGER .1.3.6.1.4.1.4526.11.500.1.7 |
agentGreenStackCurPowerConsumptionEstimated Current Power Consumption (mWatts) per Stack.ro INTEGER .1.3.6.1.4.1.4526.11.500.1.8 |
agentGreenStackPowerSavingEstimated Percentage Power Saving per Stack.ro INTEGER .1.3.6.1.4.1.4526.11.500.1.9 |