FASTPATH-CAPTIVE-PORTAL-MIB
AI MIB Summary
The FASTPATH-CAPTIVE-PORTAL-MIB enables monitoring and management of captive portal session states, authentication status, and user traffic statistics on NETGEAR FastPath-based networking hardware. This private MIB provides specific OID access to track active portal sessions, authentication failures, and bandwidth utilization for users undergoing web-based authentication.
The NETGEAR Private MIB for Captive Portal
Main OID:
fastPathCaptivePortal.1.3.6.1.4.1.4526.10.38
135
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
135 total| Object Name |
|---|
fastPathCaptivePortalThe NETGEAR Private MIB for Captive Portal MODULE-IDENTITY .1.3.6.1.4.1.4526.10.38 |
cpConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.1 |
cpGlobalConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.1.1 |
cpAdminModeEnable or disable the captive portal feature on the system.rw Enumeration .1.3.6.1.4.1.4526.10.38.1.1.1 |
cpAdditionalHttpPortThe additional captive portal authentication server port for
HTTP web connection. The HTTP port default is 0 which denotes
no specific port and the default port (80) is used.rw Integer32 .1.3.6.1.4.1.4526.10.38.1.1.2 |
cpAdditionalHttpSecurePortThe additional captive portal authentication server secure
port for HTTPS web connection. This additional HTTPS port default
is 0 which denotes no specific port and the default port (443) is used.rw Integer32 .1.3.6.1.4.1.4526.10.38.1.1.3 |
cpPeerStatsReportingIntervalThe time interval between statistics reports to the cluster controller.
A value of 0 indicates reporting is disabled.
The value is represented in seconds.rw Integer32 ( 0 | 15..3600) .1.3.6.1.4.1.4526.10.38.1.1.4 |
cpAuthTimeoutThe length of time to maintain an authentication session from a client.
This time is measured from when a client initiates an authentication request.
The value is represented in seconds.rw Integer32 .1.3.6.1.4.1.4526.10.38.1.1.5 |
cpCaptivePortalConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.1.2 |
cpCaptivePortalTableA table of config parms for instances of captive portal. SEQUENCE OF CpCaptivePortalEntry .1.3.6.1.4.1.4526.10.38.1.2.1 |
cpCaptivePortalEntryCaptive Portal instance entry. CpCaptivePortalEntry .1.3.6.1.4.1.4526.10.38.1.2.1.1 |
cpCaptivePortalInstanceIdThe identifier associated with this instance of captive portal.ro Unsigned32 .1.3.6.1.4.1.4526.10.38.1.2.1.1.1 |
cpCaptivePortalConfigNameThe name, in alpha-numeric characters, assigned to this captive portal configuration.rw DisplayString .1.3.6.1.4.1.4526.10.38.1.2.1.1.2 |
cpCaptivePortalAdminModeEnable or disable this instance of captive portal on the system.rw Enumeration .1.3.6.1.4.1.4526.10.38.1.2.1.1.3 |
cpCaptivePortalProtocolModeThe protocol mode to be used.rw Enumeration .1.3.6.1.4.1.4526.10.38.1.2.1.1.4 |
cpCaptivePortalVerificationModeThe type of user verification to perform.rw Enumeration .1.3.6.1.4.1.4526.10.38.1.2.1.1.5 |
cpCaptivePortalUserGroupThe group ID for this captive portal user database.
A group ID may be assigned for databases which use verification mode LOCAL.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.2.1.1.6 |
cpCaptivePortalURLRedirectModeWhether the captive portal should redirect newly authenticated
clients to the configured URL. If this mode is disabled, the
default locale specific welcome page is used. If enabled, the
client is redirected to a configured URL.rw Enumeration .1.3.6.1.4.1.4526.10.38.1.2.1.1.7 |
cpCaptivePortalRedirectURLThe URL to which the newly authenticated client is redirected
if cpCaptivePortalURLRedirectMode is enabled.rw DisplayString .1.3.6.1.4.1.4526.10.38.1.2.1.1.8 |
cpCaptivePortalSessionTimeoutThe session timeout. After this limit has been reached the user
will be disconnected. If this value is set to 0, no timeout is enforced.
This value is represented in seconds.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.2.1.1.9 |
cpCaptivePortalIdleTimeoutThe idle timeout of the session. After this limit has been reached the user
will be disconnected. If this value is set to 0, no timeout is enforced.
This value is represented in seconds.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.2.1.1.10 |
cpCaptivePortalRadiusAuthServerThe RADIUS authentication server name, in alpha-numeric characters (or dotted IP address), assigned to this captive portal configuration.rw DisplayString .1.3.6.1.4.1.4526.10.38.1.2.1.1.11 |
cpCaptivePortalMaxBandwidthUpThe maximum bandwidth up/transmit bytes per second rate of the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes (however; converted & stored as bits/sec).rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.2.1.1.12 |
cpCaptivePortalMaxBandwidthDownThe maximum bandwidth down/receive bytes per second rate of the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes (however; converted & stored as bits/sec).rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.2.1.1.13 |
cpCaptivePortalMaxInputOctetsThe maximum input octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.2.1.1.14 |
cpCaptivePortalMaxOutputOctetsThe maximum Output octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.2.1.1.15 |
cpCaptivePortalMaxTotalOctetsThe maximum input/output octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.2.1.1.16 |
cpCaptivePortalUserLogoutModeProvides the captive portal authenticated user the ability to
logout of their session through the use of a logout page. The
connection will be terminated as a result of submitting the
logout request.rw Enumeration .1.3.6.1.4.1.4526.10.38.1.2.1.1.17 |
cpCaptivePortalRowStatusThe captive portal instance status.
Supported values:
active(1) - valid instance
createAndGo(4) - creates a new instance
destroy(6) - removes an instancerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.1.2.1.1.18 |
cpLocalUserDatabaseGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.1.3 |
cpLocalUserGroupTableA table of group definitions for the local users. This database is
used by captive portal instances and local users if the verification mode is set to LOCAL. SEQUENCE OF CpLocalUserGroupEntry .1.3.6.1.4.1.4526.10.38.1.3.1 |
cpLocalUserGroupEntryThe user group entry. CpLocalUserGroupEntry .1.3.6.1.4.1.4526.10.38.1.3.1.1 |
cpLocalUserGroupIndexThe user group entry index. Integer32 .1.3.6.1.4.1.4526.10.38.1.3.1.1.1 |
cpLocalUserGroupNameThe user group name, limited to alpha-numeric strings (including the '-' and '_' characters).rw DisplayString .1.3.6.1.4.1.4526.10.38.1.3.1.1.2 |
cpLocalUserGroupRowStatusThe user group entry status.
Supported values:
active(1) - valid entry
createAndGo(4) - creates a new entry
destroy(6) - removes an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.1.3.1.1.3 |
cpLocalUserTableA table of user definitions for the local database. This database is
used by a captive portal instance if its verification mode is set to LOCAL. SEQUENCE OF CpLocalUserEntry .1.3.6.1.4.1.4526.10.38.1.3.2 |
cpLocalUserEntryThe local user entry. CpLocalUserEntry .1.3.6.1.4.1.4526.10.38.1.3.2.1 |
cpLocalUserIndexThe local user entry index. Integer32 .1.3.6.1.4.1.4526.10.38.1.3.2.1.1 |
cpLocalUserNameThe user name, limited to alpha-numeric strings (including the '-' and '_' characters).rw DisplayString .1.3.6.1.4.1.4526.10.38.1.3.2.1.2 |
cpLocalUserPasswordThe user password. This object will return an empty string even if a password is set.rw DisplayString .1.3.6.1.4.1.4526.10.38.1.3.2.1.3 |
cpLocalUserSessionTimeoutThe session timeout in seconds. After this limit is reached, the user is disconnected.
If this value is set to 0, the default value for the captive portal is used.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.3.2.1.4 |
cpLocalUserIdleTimeoutThe idle timeout of the session in seconds. After this limit is reached, the user is disconnected.
If this value is set to 0, the default value for the captive portal is used.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.3.2.1.5 |
cpLocalUserMaxBandwidthUpThe maximum bandwidth up/transmit bytes per second rate of the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes (however; converted & stored as bits/sec).rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.3.2.1.6 |
cpLocalUserMaxBandwidthDownThe maximum bandwidth down/receive bytes per second rate of the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes (however; converted & stored as bits/sec).rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.3.2.1.7 |
cpLocalUserMaxInputOctetsThe maximum input octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.3.2.1.8 |
cpLocalUserMaxOutputOctetsThe maximum Output octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.3.2.1.9 |
cpLocalUserMaxTotalOctetsThe maximum input/output octets (bytes) allowed for the session.
After this limit has been reached the user will be disconnected.
If this value is set to 0, no rate limiting is enforced.
This value is represented in bytes.rw Unsigned32 .1.3.6.1.4.1.4526.10.38.1.3.2.1.10 |
cpLocalUserRowStatusThe user entry status.
Supported values:
active(1) - valid entry
createAndGo(4) - creates a new entry
destroy(6) - removes an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.1.3.2.1.11 |
cpLocalUserGroupAssociationTableThe mapping of local user assignments to a user group. SEQUENCE OF CpLocalUserGroupAssociationEntry .1.3.6.1.4.1.4526.10.38.1.3.3 |
cpLocalUserGroupAssociationEntryThe local user group association entry. CpLocalUserGroupAssociationEntry .1.3.6.1.4.1.4526.10.38.1.3.3.1 |
cpLocalUserGroupAssociationUserIndexThe local user entry index associated with a user group. Integer32 .1.3.6.1.4.1.4526.10.38.1.3.3.1.1 |
cpLocalUserGroupAssociationGroupIndexThe user group entry index associated with a local user. Integer32 .1.3.6.1.4.1.4526.10.38.1.3.3.1.2 |
cpLocalUserGroupAssociationRowStatusThe local user to user group association entry status.
Supported values:
active(1) - valid entry
createAndGo(4) - creates a new entry
destroy(6) - removes an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.1.3.3.1.3 |
cpInterfaceAssociationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.1.4 |
cpInterfaceAssociationTableThe mapping of interface assignments to a captive portal instance. SEQUENCE OF CpInterfaceAssociationEntry .1.3.6.1.4.1.4526.10.38.1.4.1 |
cpInterfaceAssociationEntryThe Captive Portal interface association entry. CpInterfaceAssociationEntry .1.3.6.1.4.1.4526.10.38.1.4.1.1 |
cpIntfAssociationCPIDThe Captive Portal instance identifier associated with an interface. Unsigned32 .1.3.6.1.4.1.4526.10.38.1.4.1.1.1 |
cpIntfAssociationIfIndexThe interface ifIndex to which the Captive Portal instance is associated. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4526.10.38.1.4.1.1.2 |
cpIntfAssociationRowStatusThe Captive Portal instance to interface association status.
Supported values:
active(1) - valid entry
createAndGo(4) - creates a new entry
destroy(6) - removes an entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.1.4.1.1.3 |
cpStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.2 |
cpCaptivePortalGlobalStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.2.1 |
cpCaptivePortalOperStatusIndication of the current operational state of the captive portal feature.ro Enumeration .1.3.6.1.4.1.4526.10.38.2.1.1 |
cpCaptivePortalOperDisabledReasonThe reason for the captive portal feature being operationally disabled.ro Enumeration .1.3.6.1.4.1.4526.10.38.2.1.2 |
cpCaptivePortalIpv4AddressThe IP address of this captive portal.ro IpAddress .1.3.6.1.4.1.4526.10.38.2.1.3 |
cpCaptivePortalInstanceMaxCountThe maximum number of captive portal instances supported by the system.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.1.4 |
cpCaptivePortalInstanceConfiguredCountThe number of captive portal instances currently configured in the system.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.1.5 |
cpCaptivePortalInstanceActiveCountThe number of captive portal instances currently active in the system.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.1.6 |
cpCaptivePortalAuthenUserMaxCountThe maximum number of authenticated users that the system can support.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.1.7 |
cpCaptivePortalLocalUserMaxCountThe maximum number of local users that the system can support.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.1.8 |
cpCaptivePortalConfiguredLocalUserCountThe number of local users currently configured in the system.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.1.9 |
cpCaptivePortalAuthenUserCurrentCountThe number of currently authenticated users across all captive portal instances.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.1.10 |
cpCaptivePortalInstanceStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.2.2 |
cpCaptivePortalInstanceStatusTableThis database is used to report status for a captive portal instance. SEQUENCE OF CpCaptivePortalInstanceStatusEntry .1.3.6.1.4.1.4526.10.38.2.2.1 |
cpCaptivePortalInstanceStatusEntryCaptive portal instance status entry. CpCaptivePortalInstanceStatusEntry .1.3.6.1.4.1.4526.10.38.2.2.1.1 |
cpCaptivePortalInstanceOperStatusIndication of the current operational state of the captive portal instance.ro Enumeration .1.3.6.1.4.1.4526.10.38.2.2.1.1.1 |
cpCaptivePortalInstanceOperDisabledReasonThe reason the captive portal instance is not currently operational.ro Enumeration .1.3.6.1.4.1.4526.10.38.2.2.1.1.2 |
cpCaptivePortalInstanceBlockStatusBlock or unblock the captive portal instance for authentications.rw Enumeration .1.3.6.1.4.1.4526.10.38.2.2.1.1.3 |
cpCaptivePortalInstanceAuthUserCountThe number of currently authenticated users for this captive portal.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.2.1.1.4 |
cpCaptivePortalIntfStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.2.3 |
cpCaptivePortalIntfStatusTableThis database is used to report status for a captive portal instance interface. SEQUENCE OF CpCaptivePortalIntfStatusEntry .1.3.6.1.4.1.4526.10.38.2.3.1 |
cpCaptivePortalIntfStatusEntryCaptive portal instance interface status entry. CpCaptivePortalIntfStatusEntry .1.3.6.1.4.1.4526.10.38.2.3.1.1 |
cpCaptivePortalIntfIfIndexThe ifIndex of the interface associated with this entry.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4526.10.38.2.3.1.1.1 |
cpCaptivePortalIntfOperStatusIndication of whether captive portal instance is active on the interface.ro Enumeration .1.3.6.1.4.1.4526.10.38.2.3.1.1.2 |
cpCaptivePortalIntfOperDisabledReasonThe reason for the captive portal instance interface not being currently operational.ro Enumeration .1.3.6.1.4.1.4526.10.38.2.3.1.1.3 |
cpCaptivePortalIntfBlockStatusIndication of whether the captive portal instance interface is
currently blocked for authentications.ro Enumeration .1.3.6.1.4.1.4526.10.38.2.3.1.1.4 |
cpCaptivePortalIntfAuthUserCountThe number of currently authenticated users for this captive portal instance interface.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.3.1.1.5 |
cpCaptivePortalIntfDatabaseGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.2.4 |
cpCaptivePortalIntfDatabaseTableA table of definitions for interfaces that are captive portal capable.
This table identifies services that are provided on this interface. SEQUENCE OF CpCaptivePortalIntfDatabaseEntry .1.3.6.1.4.1.4526.10.38.2.4.1 |
cpCaptivePortalIntfDatabaseEntry CpCaptivePortalIntfDatabaseEntry .1.3.6.1.4.1.4526.10.38.2.4.1.1 |
cpCaptivePortalIntfCapabilitiesThe bitmap value used to identify which capabilities are available on the interface.ro CpCaptivePortalIntfCapabilitiesMap .1.3.6.1.4.1.4526.10.38.2.4.1.1.1 |
cpCaptivePortalClientStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.2.5 |
cpCaptivePortalClientStatusTableThis database is used to report status of authenticated clients. SEQUENCE OF CpCaptivePortalClientStatusEntry .1.3.6.1.4.1.4526.10.38.2.5.1 |
cpCaptivePortalClientStatusEntryCaptive portal client status entry. CpCaptivePortalClientStatusEntry .1.3.6.1.4.1.4526.10.38.2.5.1.1 |
cpCaptivePortalClientMacAddressThe MAC address of the workstation from which the client is authenticated.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.2.5.1.1.1 |
cpCaptivePortalClientIpAddressThe IP address of the workstation from which the client is authenticated.ro IpAddress .1.3.6.1.4.1.4526.10.38.2.5.1.1.2 |
cpCaptivePortalClientUserNameUser name (or Guest ID) of the connected client.ro DisplayString .1.3.6.1.4.1.4526.10.38.2.5.1.1.3 |
cpCaptivePortalClientProtocolModeProtocol mode used for the client authentication.ro Enumeration .1.3.6.1.4.1.4526.10.38.2.5.1.1.4 |
cpCaptivePortalClientVerificationModeType of user verification performed for the client authentication.ro Enumeration .1.3.6.1.4.1.4526.10.38.2.5.1.1.5 |
cpCaptivePortalClientAssocIfIndexThe interface on which the client was authenticated.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4526.10.38.2.5.1.1.6 |
cpCaptivePortalClientCPIDThe captive portal instance on which the client was authenticated.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.5.1.1.7 |
cpCaptivePortalClientSessionTimeThe time (in seconds) since the client was authenticated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4526.10.38.2.5.1.1.8 |
cpCaptivePortalClientSwitchMacAddressThe MAC address of the switch to which the client is authenticated.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.2.5.1.1.9 |
cpCaptivePortalClientSwitchIpAddressThe IP address of the switch to which the client is authenticated.ro IpAddress .1.3.6.1.4.1.4526.10.38.2.5.1.1.10 |
cpCaptivePortalClientSwitchTypeThe switch (peer or local) to which the client is authenticated.ro Enumeration .1.3.6.1.4.1.4526.10.38.2.5.1.1.11 |
cpCaptivePortalClientDeauthActionThis is an action object. Setting this object to start will initiate the
deauthentication of authenticated client. Read on this object will always return none.rw Enumeration .1.3.6.1.4.1.4526.10.38.2.5.1.1.12 |
cpCaptivePortalClientAuthFailureConnectionAttemptsThe captive portal authentication failure count.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.5.1.1.13 |
cpCaptivePortalClientStatisticsTableA table of statistics for each active session. SEQUENCE OF CpCaptivePortalClientStatisticsEntry .1.3.6.1.4.1.4526.10.38.2.5.2 |
cpCaptivePortalClientStatisticsEntryCaptive portal client statistics entry. CpCaptivePortalClientStatisticsEntry .1.3.6.1.4.1.4526.10.38.2.5.2.1 |
cpCaptivePortalClientBytesReceivedNumber of bytes received by this client.ro Counter64 .1.3.6.1.4.1.4526.10.38.2.5.2.1.1 |
cpCaptivePortalClientBytesTransmittedNumber of bytes transmitted by this client.ro Counter64 .1.3.6.1.4.1.4526.10.38.2.5.2.1.2 |
cpCaptivePortalClientPacketsReceivedNumber of packets received by this client.ro Counter64 .1.3.6.1.4.1.4526.10.38.2.5.2.1.3 |
cpCaptivePortalClientPacketsTransmittedNumber of packets transmitted by this client.ro Counter64 .1.3.6.1.4.1.4526.10.38.2.5.2.1.4 |
cpCaptivePortalIntfClientAssocGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.2.6 |
cpCaptivePortalIntfClientAssocTableThis database is used to report clients associated with a
particular captive portal interface. SEQUENCE OF CpCaptivePortalIntfClientAssocEntry .1.3.6.1.4.1.4526.10.38.2.6.1 |
cpCaptivePortalIntfClientAssocEntryCaptive portal interface client status entry. CpCaptivePortalIntfClientAssocEntry .1.3.6.1.4.1.4526.10.38.2.6.1.1 |
cpCaptivePortalIntfClientIfIndexThe interface on which the client was authenticated.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4526.10.38.2.6.1.1.1 |
cpCaptivePortalIntfClientAssocMacAddressThe MAC address of the workstation from which the client is authenticated.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.2.6.1.1.2 |
cpCaptivePortalIntfClientAssocRowStatusThis specifies the row-status of this entry. For a valid entry,
the row-status will return active(1). This is the only supported value.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.2.6.1.1.3 |
cpCaptivePortalInstanceClientAssocGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.2.7 |
cpCaptivePortalInstanceClientAssocTableThis database is used to report clients associated with a
particular captive portal instance. SEQUENCE OF CpCaptivePortalInstanceClientAssocEntry .1.3.6.1.4.1.4526.10.38.2.7.1 |
cpCaptivePortalInstanceClientAssocEntryCaptive Portal instance client status entry. CpCaptivePortalInstanceClientAssocEntry .1.3.6.1.4.1.4526.10.38.2.7.1.1 |
cpCaptivePortalInstanceClientAssocInstanceIdThe instance ID associated with this client.ro Integer32 .1.3.6.1.4.1.4526.10.38.2.7.1.1.1 |
cpCaptivePortalInstanceClientAssocMacAddressThe MAC address of the workstation from which the client is authenticated.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.2.7.1.1.2 |
cpCaptivePortalInstanceClientAssocRowStatusThis specifies the row-status of this entry. For a valid entry,
the row-status will return active(1). This is the only supported value.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4526.10.38.2.7.1.1.3 |
cpTrapsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.3 |
cpTrapModeFlag to enable/disable following Captive Portal SNMP traps:
Client Authentication Failures,
Client Connections,
Client Database Full,
Client Disconnections.rw Enumeration .1.3.6.1.4.1.4526.10.38.3.1 |
cpClientAuthenticationFailureTrapModeFlag to enable/disable client authentication failure SNMP traps.rw Enumeration .1.3.6.1.4.1.4526.10.38.3.2 |
cpClientConnectTrapModeFlag to enable/disable client connection SNMP traps.rw Enumeration .1.3.6.1.4.1.4526.10.38.3.3 |
cpClientDatabaseFullTrapModeFlag to enable/disable client database full SNMP traps.rw Enumeration .1.3.6.1.4.1.4526.10.38.3.4 |
cpClientDisconnectTrapModeFlag to enable/disable client disconnection SNMP traps.rw Enumeration .1.3.6.1.4.1.4526.10.38.3.5 |
cpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4526.10.38.4 |
cpClientAuthenticationFailureA cpClientAuthenticationFailure trap signifies that the SNMP entity,
acting in an agent role, has detected a client authentication failure. NOTIFICATION-TYPE .1.3.6.1.4.1.4526.10.38.4.1 |
cpClientConnectA cpClientConnect trap signifies that the SNMP entity,
acting in an agent role, has detected a client connection. NOTIFICATION-TYPE .1.3.6.1.4.1.4526.10.38.4.2 |
cpClientDatabaseFullA cpClientDatabaseFull trap signifies that the SNMP entity,
acting in an agent role, has detected that client authentication database is full. NOTIFICATION-TYPE .1.3.6.1.4.1.4526.10.38.4.3 |
cpClientDisconnectA cpClientDisconnect trap signifies that the SNMP entity,
acting in an agent role, has detected a client disconnection. NOTIFICATION-TYPE .1.3.6.1.4.1.4526.10.38.4.4 |