EdgeSwitch-QOS-AUTOVOIP-MIB
The EdgeSwitch-QOS-AUTOVOIP-MIB module enables the monitoring and management of Quality of Service (QoS) parameters specifically for the VoIP Flex package on D-Link EdgeSwitch hardware. It facilitates the tracking of automated voice traffic classification, priority queuing states, and bandwidth allocation metrics to ensure consistent latency and jitter performance for VoIP sessions.
Imported Objects
Objects
27 total| Object Name |
|---|
fastPathQOSAUTOVOIPThe MIB definitions for Quality of Service - VoIP Flex package. MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.3.4 |
agentAutoVoIPCfgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.3.4.1 |
agentAutoVoIPVLANThe VLAN to which all VoIP traffic is mapped to.rw INTEGER .1.3.6.1.4.1.4413.1.1.3.4.1.1 |
agentAutoVoIPOUIPriorityThe priority to which all VoIP traffic with known OUI is mapped to.rw INTEGER .1.3.6.1.4.1.4413.1.1.3.4.1.2 |
agentAutoVoIPProtocolPriSchemeThe priotization scheme which is used to priritize the voice data.rw Enumeration .1.3.6.1.4.1.4413.1.1.3.4.1.3 |
agentAutoVoIPProtocolTcOrRemarkValueIf 'agentAutoVoIPProtocolPriScheme' is traffic class,
then the object 'agentAutoVoIPProtocolTcOrRemarkValue' is
CoS Queue value to which all VoIP traffic is mapped to.
if 'agentAutoVoIPProtocolPriScheme' is remark,
then the object 'agentAutoVoIPProtocolTcOrRemarkValue' is
802.1p priority to which all VoIP traffic is remarked at the ingress port.
This is used by Protocol based Auto VoIPrw Unsigned32 .1.3.6.1.4.1.4413.1.1.3.4.1.4 |
agentAutoVoIPTableA table providing configuration of Auto VoIP Profile. SEQUENCE OF AgentAutoVoIPEntry .1.3.6.1.4.1.4413.1.1.3.4.1.5 |
agentAutoVoIPEntryAuto VoIP Profile configuration for a port. AgentAutoVoIPEntry .1.3.6.1.4.1.4413.1.1.3.4.1.5.1 |
agentAutoVoIPIntfIndexThis is a unique index for an entry in the
agentAutoVoIPTable. A non-zero value indicates
the ifIndex for the corresponding interface entry
in the ifTable. A value of zero represents global
configuration, which in turn causes all interface
entries to be updated for a set operation, or
reflects the most recent global setting for a get
operation. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4413.1.1.3.4.1.5.1.1 |
agentAutoVoIPProtocolModeEnables / disables AutoVoIP Protocol profile on an interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.3.4.1.5.1.2 |
agentAutoVoIPOUIModeEnables / disables AutoVoIP OUI profile on an interface.rw Enumeration .1.3.6.1.4.1.4413.1.1.3.4.1.5.1.3 |
agentAutoVoIPProtocolPortStatusAutoVoIP protocol profile operational status of an interface.ro Enumeration .1.3.6.1.4.1.4413.1.1.3.4.1.5.1.4 |
agentAutoVoIPOUIPortStatusAutoVoIP OUI profile operational status of an interface.ro Enumeration .1.3.6.1.4.1.4413.1.1.3.4.1.5.1.5 |
agentAutoVoIPOUITableA table providing configuration of Auto VoIP Profile. SEQUENCE OF AgentAutoVoIPOUIEntry .1.3.6.1.4.1.4413.1.1.3.4.1.6 |
agentAutoVoIPOUIEntryAuto VoIP Profile OUI configuration. AgentAutoVoIPOUIEntry .1.3.6.1.4.1.4413.1.1.3.4.1.6.1 |
agentAutoVoIPOUIIndexThe Auto VoIP OUI table index.ro Integer32 .1.3.6.1.4.1.4413.1.1.3.4.1.6.1.1 |
agentAutoVoIPOUIThe Organizationally Unique Identifier (OUI), as defined
in IEEE std 802-2001, is a 24 bit (three octets) globally
unique assigned number referenced by various standards,
of the information received from the remote system.rw OCTET STRING .1.3.6.1.4.1.4413.1.1.3.4.1.6.1.2 |
agentAutoVoIPOUIDescThe Description of the Organizationally Unique Identifier (OUI),
as defined in IEEE std 802-2001(up to 32 characters)rw OCTET STRING .1.3.6.1.4.1.4413.1.1.3.4.1.6.1.3 |
agentAutoVoIPOUIRowStatusThe row status variable is used according to installation and removal conventions for conceptual rows.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.3.4.1.6.1.4 |
agentAutoVoIPSessionTableA table providing configuration of Auto VoIP Profile. SEQUENCE OF AgentAutoVoIPSessionEntry .1.3.6.1.4.1.4413.1.1.3.4.1.7 |
agentAutoVoIPSessionEntryAuto VoIP Session Table. AgentAutoVoIPSessionEntry .1.3.6.1.4.1.4413.1.1.3.4.1.7.1 |
agentAutoVoIPSessionIndexThe Auto VoIP session index.ro INTEGER .1.3.6.1.4.1.4413.1.1.3.4.1.7.1.1 |
agentAutoVoIPSourceIPThe source IP address of the VoIP session.ro IpAddress .1.3.6.1.4.1.4413.1.1.3.4.1.7.1.2 |
agentAutoVoIPDestinationIPThe destination IP address of the VoIP session.ro IpAddress .1.3.6.1.4.1.4413.1.1.3.4.1.7.1.3 |
agentAutoVoIPSourceL4PortThe source L4 Port of the VoIP session.ro INTEGER .1.3.6.1.4.1.4413.1.1.3.4.1.7.1.4 |
agentAutoVoIPDestinationL4PortThe destination L4 Port of the VoIP session.ro INTEGER .1.3.6.1.4.1.4413.1.1.3.4.1.7.1.5 |
agentAutoVoIPProtocolThe Protocol of the VoIP session.ro INTEGER .1.3.6.1.4.1.4413.1.1.3.4.1.7.1.6 |
More MIBs from Broadcom
Browse all BroadcomMIBs →SNMP MIB module
SNMP MIB module
The FASTPATH-ROUTING-MIB provides vendor-specific SNMP access to monitor and manage routing table entries, forwarding states, and interface statistics on Broadcom-based FastPath switching platforms. It exposes critical operational metrics including active route counts, protocol state transitions, and packet forwarding counters essential for troubleshooting Layer 3 forwarding performance on these proprietary hardware architectures.
The FASTPATH-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) policies, including traffic classification, marking, and queuing parameters, on Netgear FastPath-based networking hardware. This private module provides vendor-specific access to internal QoS state variables and counters that are not exposed in standard IETF DiffServ MIBs.
The EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) parameters, including traffic classification, queuing, and scheduling policies, on Ubiquiti EdgeSwitch hardware. This private MIB extension provides granular visibility into per-interface and per-queue traffic statistics and policy enforcement states not covered by standard DiffServ MIBs.
Standard SNMP MIB module defining data structures for QUANTA-LB6M-REF-MIB.