EdgeSwitch-PORTSECURITY-PRIVATE-MIB
The EdgeSwitch-PORTSECURITY-PRIVATE-MIB enables monitoring and management of port security states, MAC address violations, and access control enforcement on Ubiquiti EdgeSwitch hardware via SNMP. This private module exposes vendor-specific counters and status variables required to audit Layer 2 security policies and detect unauthorized device connections on managed switch ports.
Imported Objects
Objects
23 total| Object Name |
|---|
fastPathPortSecurityThe Ubiquiti Private MIB for EdgeSwitch Port Security Feature. MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.20 |
agentPortSecurityGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.20.1 |
agentGlobalPortSecurityModeMode showing whether at the global level, port security is enabled or not.rw Enumeration .1.3.6.1.4.1.4413.1.1.20.1.1 |
agentPortSecurityTableA table for Port Security and associated functionality. SEQUENCE OF AgentPortSecurityEntry .1.3.6.1.4.1.4413.1.1.20.1.2 |
agentPortSecurityEntryRepresents entry for port security table AgentPortSecurityEntry .1.3.6.1.4.1.4413.1.1.20.1.2.1 |
agentPortSecurityModeMode showing whether at port level security is enabled or not.rw Enumeration .1.3.6.1.4.1.4413.1.1.20.1.2.1.1 |
agentPortSecurityDynamicLimitThis variable signifies the limit of dynamically locked MAC addresses
allowed on a specific port.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.20.1.2.1.2 |
agentPortSecurityStaticLimitThis variable signifies the limit of statically locked MAC addresses
allowed on a specific port.rw Unsigned32 .1.3.6.1.4.1.4413.1.1.20.1.2.1.3 |
agentPortSecurityViolationTrapModeThis variable is used to enable or disable the sending of new violation
traps designating when a packet with a disallowed MAC address is
received on a locked port.rw Enumeration .1.3.6.1.4.1.4413.1.1.20.1.2.1.4 |
agentPortSecurityStaticMACsThis variable displays the statically locked MAC addresses for port.
The list displayed in a particular fashion :
2 a0:b1:c2:d1:e3:a1,11 a0:b1:c2:d3:e4:f5
(i.e., VLAN MAC pairs followed by a 1 or 0 to indicate a sticky entry, separated by commas).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.20.1.2.1.6 |
agentPortSecurityLastDiscardedMACThis variable displays the vlan-id and source MAC address of the last packet that was
discarded on a locked port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.20.1.2.1.7 |
agentPortSecurityMACAddressAddThis MIB variable accepts a VLAN id, MAC address and the sticky value to be added to the list
of statically locked MAC addresses on a port. The VLAN id, MAC address and sticky value combination
would be entered in a particular fashion like :- 2 a0:b0:c0:d1:e2:a1 1(the vlan-id, MAC address
and sticky value separated by blank-spaces).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.20.1.2.1.8 |
agentPortSecurityMACAddressRemoveThis MIB variable accepts a VLAN id and MAC address to be removed from the list
of statically locked MAC addresses on a port.. The VLAN id and MAC address combination
would be entered in a particular fashion like :- 2 a0:b0:c0:d1:e2:a1(the vlan-id and
MAC address separated by a blank-space).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.20.1.2.1.9 |
agentPortSecurityMACAddressMoveWhen this object is enabled, all the dynamically locked MAC addresses will
be moved to statically locked addresses on a port. GET operation on this object will display
disable.rw Enumeration .1.3.6.1.4.1.4413.1.1.20.1.2.1.10 |
agentPortSecurityStickyModeThis object is used to configure port level security sticky mode in a port.rw Enumeration .1.3.6.1.4.1.4413.1.1.20.1.2.1.11 |
agentPortSecurityDynamicTableA table for Port Security Dynamic and associated functionality. SEQUENCE OF AgentPortSecurityDynamicEntry .1.3.6.1.4.1.4413.1.1.20.1.3 |
agentPortSecurityDynamicEntryRepresents entry for port MAC Locking table AgentPortSecurityDynamicEntry .1.3.6.1.4.1.4413.1.1.20.1.3.1 |
agentPortSecurityDynamicVLANIdSource VLAN id of the packet that is received on the dynamically locked port.ro Unsigned32 .1.3.6.1.4.1.4413.1.1.20.1.3.1.1 |
agentPortSecurityDynamicMACAddressSource MAC address of the packet that is received on the dynamically locked port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.20.1.3.1.2 |
agentGlobalPortSecurityStickyModeThis object is used to apply the Sticky Mode to all ports.
This is write-only value. It always returns 'disable' on requestrw Enumeration .1.3.6.1.4.1.4413.1.1.20.1.4 |
agentGlobalPortSecurityViolationTrapModeThis variable is used to enable or disable the sending of new violation
traps designating when a packet with a disallowed MAC address is
received on a locked port. The configuration will be done on all ports.
This is write-only value. It always returns 'disable' on requestrw Enumeration .1.3.6.1.4.1.4413.1.1.20.1.5 |
agentPortSecurityTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.20.2 |
agentPortSecurityViolationSent when a packet is received on a locked port with a source MAC address
that is not allowed. NOTIFICATION-TYPE .1.3.6.1.4.1.4413.1.1.20.2.1 |
More MIBs from Broadcom
Browse all BroadcomMIBs →SNMP MIB module
SNMP MIB module
The FASTPATH-ROUTING-MIB provides vendor-specific SNMP access to monitor and manage routing table entries, forwarding states, and interface statistics on Broadcom-based FastPath switching platforms. It exposes critical operational metrics including active route counts, protocol state transitions, and packet forwarding counters essential for troubleshooting Layer 3 forwarding performance on these proprietary hardware architectures.
The FASTPATH-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) policies, including traffic classification, marking, and queuing parameters, on Netgear FastPath-based networking hardware. This private module provides vendor-specific access to internal QoS state variables and counters that are not exposed in standard IETF DiffServ MIBs.
The EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) parameters, including traffic classification, queuing, and scheduling policies, on Ubiquiti EdgeSwitch hardware. This private MIB extension provides granular visibility into per-interface and per-queue traffic statistics and policy enforcement states not covered by standard DiffServ MIBs.
Standard SNMP MIB module defining data structures for QUANTA-LB6M-REF-MIB.