EdgeSwitch-MGMT-SECURITY-MIB
Imported Objects
Objects
22 total| Object Name |
|---|
fastPathMgmtSecurityThe Ubiquiti Private MIB for FastPath Security MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.11 |
agentSSLConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.11.1 |
agentSSLAdminModeConfigures whether the SSL service is enabled on this switch. The
default value is disable(2).rw Enumeration .1.3.6.1.4.1.4413.1.1.11.1.1 |
agentSSLSecurePortConfigures the port the SSL service will respond on. The default
value is 443.rw Integer32 (443|1025..65535) .1.3.6.1.4.1.4413.1.1.11.1.2 |
agentSSLProtocolLevelConfigures which protocol versions of SSL are enabled on this
switch. The default value is both(3).rw Enumeration .1.3.6.1.4.1.4413.1.1.11.1.3 |
agentSSLMaxSessionsConfigures the maximum number of allowable SSL sessions. The default
value is 16.rw Integer32 .1.3.6.1.4.1.4413.1.1.11.1.4 |
agentSSLHardTimeoutConfigures the hard timeout for SSL sessions in hours. The default
value is 24 hours.rw Integer32 .1.3.6.1.4.1.4413.1.1.11.1.5 |
agentSSLSoftTimeoutConfigures the soft (activity) timeout for SSL sessions in minutes.
The default value is 5 minutes.rw Integer32 .1.3.6.1.4.1.4413.1.1.11.1.6 |
agentSSLCertificatePresentBoolean value indicating whether SSL certificate files exist on the device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.11.1.7 |
agentSSLCertificateControlControls certificate generation and deletion. Always returns noop(1).rw Enumeration .1.3.6.1.4.1.4413.1.1.11.1.8 |
agentSSLCertificateGenerationStatusIndicates whether certificate files are currently being generated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.11.1.9 |
agentSSHConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.11.2 |
agentSSHAdminModeConfigures whether the SSH service is enabled on this switch. The
default value is disable(2).rw Enumeration .1.3.6.1.4.1.4413.1.1.11.2.1 |
agentSSHProtocolLevelConfigures which protocol versions of SSH are enabled on this
switch. The default value is both(3).rw Enumeration .1.3.6.1.4.1.4413.1.1.11.2.2 |
agentSSHSessionsCountCurrent number of active SSH sessions on this switch.ro Integer32 .1.3.6.1.4.1.4413.1.1.11.2.3 |
agentSSHMaxSessionsCountMax number of SSH sessions permitted on this switch.rw Integer32 .1.3.6.1.4.1.4413.1.1.11.2.4 |
agentSSHSessionTimeoutssh idle timeout value for this switch im minutes.rw Integer32 .1.3.6.1.4.1.4413.1.1.11.2.5 |
agentSSHKeysPresentIndicates what key files are present on the device, if any.ro Enumeration .1.3.6.1.4.1.4413.1.1.11.2.6 |
agentSSHKeyGenerationStatusIndicates what key files are currently being generated, if any.ro Enumeration .1.3.6.1.4.1.4413.1.1.11.2.7 |
agentSSHRSAKeyControlControls RSA key generation and deletion. Always returns noop(1).rw Enumeration .1.3.6.1.4.1.4413.1.1.11.2.8 |
agentSSHDSAKeyControlControls DSA key generation and deletion. Always returns noop(1).rw Enumeration .1.3.6.1.4.1.4413.1.1.11.2.9 |
agentSSHMgmtPortNumGet/Set the TCP port number that the SSH server listens to for incoming
requests. The port number is an integer value from 1 to 65535. Before setting
this object, check your system (e.g. using 'netstat') to make sure the desired
port number is not currently being used by any other service. The default
value for this object is 22.
Note that existing SSH login sessions are not affected by a change in value of
this object, although establishment of any new SSH sessions must use the new
port number.rw Integer32 .1.3.6.1.4.1.4413.1.1.11.2.10 |
More MIBs from Broadcom
Browse all BroadcomMIBs →SNMP MIB module
SNMP MIB module
The FASTPATH-ROUTING-MIB provides vendor-specific SNMP access to monitor and manage routing table entries, forwarding states, and interface statistics on Broadcom-based FastPath switching platforms. It exposes critical operational metrics including active route counts, protocol state transitions, and packet forwarding counters essential for troubleshooting Layer 3 forwarding performance on these proprietary hardware architectures.
The FASTPATH-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) policies, including traffic classification, marking, and queuing parameters, on Netgear FastPath-based networking hardware. This private module provides vendor-specific access to internal QoS state variables and counters that are not exposed in standard IETF DiffServ MIBs.
The EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) parameters, including traffic classification, queuing, and scheduling policies, on Ubiquiti EdgeSwitch hardware. This private MIB extension provides granular visibility into per-interface and per-queue traffic statistics and policy enforcement states not covered by standard DiffServ MIBs.
Standard SNMP MIB module defining data structures for QUANTA-LB6M-REF-MIB.