EdgeSwitch-LLPF-PRIVATE-MIB
The EdgeSwitch-LLPF-PRIVATE-MIB provides vendor-specific access to monitor and configure Link Local Protocol Filtering (LLPF) policies on Ubiquiti EdgeSwitch hardware, enabling the inspection of traffic filtering rules applied to link-local multicast and broadcast packets. This module exposes counters and status indicators for dropped or permitted link-local frames, allowing administrators to verify the enforcement of Layer 2 security policies that restrict unauthorized discovery protocols.
Imported Objects
Objects
6 total| Object Name |
|---|
fastPathLlpfThe Ubiquiti Private MIB for EdgeSwitch Link Local Protocol Filtering. MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.48 |
agentSwitchLlpfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.48.1 |
agentSwitchLlpfPortConfigTableA table that contains the configuration objects for the
with each port. SEQUENCE OF AgentSwitchLlpfPortConfigEntry .1.3.6.1.4.1.4413.1.1.48.1.1 |
agentSwitchLlpfPortConfigEntryThe configuration information for LLPF. AgentSwitchLlpfPortConfigEntry .1.3.6.1.4.1.4413.1.1.48.1.1.1 |
agentSwitchLlpfProtocolTypePort's LLPF protocol Type. It can be one of the following values
isdp,vtp,dtp,udld,pagp,sstp,all. Unsigned32 .1.3.6.1.4.1.4413.1.1.48.1.1.1.1 |
agentSwitchLlpfPortBlockModePort's LLPF mode. It can be either enabled or disabled
default will be disable.rw Enumeration .1.3.6.1.4.1.4413.1.1.48.1.1.1.2 |
More MIBs from Broadcom
Browse all BroadcomMIBs →SNMP MIB module
SNMP MIB module
The FASTPATH-ROUTING-MIB provides vendor-specific SNMP access to monitor and manage routing table entries, forwarding states, and interface statistics on Broadcom-based FastPath switching platforms. It exposes critical operational metrics including active route counts, protocol state transitions, and packet forwarding counters essential for troubleshooting Layer 3 forwarding performance on these proprietary hardware architectures.
The FASTPATH-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) policies, including traffic classification, marking, and queuing parameters, on Netgear FastPath-based networking hardware. This private module provides vendor-specific access to internal QoS state variables and counters that are not exposed in standard IETF DiffServ MIBs.
The EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) parameters, including traffic classification, queuing, and scheduling policies, on Ubiquiti EdgeSwitch hardware. This private MIB extension provides granular visibility into per-interface and per-queue traffic statistics and policy enforcement states not covered by standard DiffServ MIBs.
Standard SNMP MIB module defining data structures for QUANTA-LB6M-REF-MIB.