EdgeSwitch-KEYING-PRIVATE-MIB
The EdgeSwitch-KEYING-PRIVATE-MIB provides vendor-specific SNMP access to monitor and configure authentication keying parameters, including pre-shared keys and cryptographic settings, on Ubiquiti EdgeSwitch hardware. This private MIB enables granular management of security credentials for protocols such as SSH, SNMPv3, and 802.1X on the EdgeSwitch series.
Imported Objects
Objects
9 total| Object Name |
|---|
fastPathKeyingPrivateThe Ubiquiti Private MIB for EdgeSwitch Keying Utility MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.24 |
agentFeatureKeyingGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.24.1 |
agentFeatureKeyingEnableKeyHexadecimal Key-string entered to enable an advance functionality.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.24.1.1 |
agentFeatureKeyingDisableKeyHexadecimal Key-string entered to disable an advance functionality.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.24.1.2 |
agentFeatureKeyingTableA table for license key and associated functionality. SEQUENCE OF AgentFeatureKeyingEntry .1.3.6.1.4.1.4413.1.1.24.1.3 |
agentFeatureKeyingEntryRepresents entry for key table AgentFeatureKeyingEntry .1.3.6.1.4.1.4413.1.1.24.1.3.1 |
agentFeatureKeyingIndexA value corresponding to a keyable feature.When this table is walked,
only values associated with keyable features are returned.This value
must be equivalent to valid value of agentFeatureKeyingIndex. Unsigned32 .1.3.6.1.4.1.4413.1.1.24.1.3.1.1 |
agentFeatureKeyingNameThe abbreviated name of this component.This is also equivalent to
agentFeatureKeyingNamero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.24.1.3.1.2 |
agentFeatureKeyingStatusReturns a value of (1) if the feature is enabled for management,
(2) if disabled.ro Enumeration .1.3.6.1.4.1.4413.1.1.24.1.3.1.3 |
More MIBs from Broadcom
Browse all BroadcomMIBs →SNMP MIB module
SNMP MIB module
The FASTPATH-ROUTING-MIB provides vendor-specific SNMP access to monitor and manage routing table entries, forwarding states, and interface statistics on Broadcom-based FastPath switching platforms. It exposes critical operational metrics including active route counts, protocol state transitions, and packet forwarding counters essential for troubleshooting Layer 3 forwarding performance on these proprietary hardware architectures.
The FASTPATH-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) policies, including traffic classification, marking, and queuing parameters, on Netgear FastPath-based networking hardware. This private module provides vendor-specific access to internal QoS state variables and counters that are not exposed in standard IETF DiffServ MIBs.
The EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) parameters, including traffic classification, queuing, and scheduling policies, on Ubiquiti EdgeSwitch hardware. This private MIB extension provides granular visibility into per-interface and per-queue traffic statistics and policy enforcement states not covered by standard DiffServ MIBs.
Standard SNMP MIB module defining data structures for QUANTA-LB6M-REF-MIB.