EdgeSwitch-DOT1X-AUTHENTICATION-SERVER-MIB
The EdgeSwitch-DOT1X-AUTHENTICATION-SERVER-MIB enables monitoring and management of IEEE 802.1X authentication server states, session counts, and authentication failures on Ubiquiti EdgeSwitch devices running FastPath firmware. This private MIB provides granular visibility into RADIUS interaction metrics and port-based access control events specific to the Ubiquiti FastPath switching architecture.
Imported Objects
Objects
9 total| Object Name |
|---|
fastPathdot1xAuthenticationServerThe Ubiquiti Private MIB for FastPath Dot1x Authentication Server MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.49 |
agentDot1xAuthServUserConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.49.1 |
agentDot1xAuthServUserConfigCreateCreate a new user.
When set with a non-empty string, a new user with that name will be created.
This object will only return an empty string.
This string is limited to alpha-numeric strings (including the '-' and '_' characters).rw DisplayString .1.3.6.1.4.1.4413.1.1.49.1.1 |
agentDot1xAuthServUserConfigTableA table for dot1x Client details and associated functionality. SEQUENCE OF AgentDot1xAuthServUserConfigEntry .1.3.6.1.4.1.4413.1.1.49.1.2 |
agentDot1xAuthServUserConfigEntryRepresents entry for port config table. AgentDot1xAuthServUserConfigEntry .1.3.6.1.4.1.4413.1.1.49.1.2.1 |
agentDot1xAuthServUserIndexDot1x user config index. Integer32 .1.3.6.1.4.1.4413.1.1.49.1.2.1.1 |
agentDot1xAuthServUserNameDot1x user name.
This string is limited to alpha-numeric strings (including '-' and '_'
characters).rw DisplayString .1.3.6.1.4.1.4413.1.1.49.1.2.1.2 |
agentDot1xAuthServUserPasswordDot1x user password.rw DisplayString .1.3.6.1.4.1.4413.1.1.49.1.2.1.3 |
agentDot1xAuthServUserStatusDot1x User Status.
active(1) - This user account is active.
destroy(6) - Set to this value to remove this user account.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.49.1.2.1.4 |
More MIBs from Broadcom
Browse all BroadcomMIBs →SNMP MIB module
SNMP MIB module
The FASTPATH-ROUTING-MIB provides vendor-specific SNMP access to monitor and manage routing table entries, forwarding states, and interface statistics on Broadcom-based FastPath switching platforms. It exposes critical operational metrics including active route counts, protocol state transitions, and packet forwarding counters essential for troubleshooting Layer 3 forwarding performance on these proprietary hardware architectures.
The FASTPATH-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) policies, including traffic classification, marking, and queuing parameters, on Netgear FastPath-based networking hardware. This private module provides vendor-specific access to internal QoS state variables and counters that are not exposed in standard IETF DiffServ MIBs.
The EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) parameters, including traffic classification, queuing, and scheduling policies, on Ubiquiti EdgeSwitch hardware. This private MIB extension provides granular visibility into per-interface and per-queue traffic statistics and policy enforcement states not covered by standard DiffServ MIBs.
Standard SNMP MIB module defining data structures for QUANTA-LB6M-REF-MIB.