EdgeSwitch-DHCPCLIENT-PRIVATE-MIB
The EdgeSwitch-DHCPCLIENT-PRIVATE-MIB enables monitoring of Dynamic Host Configuration Protocol (DHCP) client operational states, lease durations, and assigned IP address bindings on Ubiquiti EdgeSwitch hardware. This private module provides vendor-specific visibility into client registration status, server interactions, and network interface DHCP configuration parameters not covered by standard MIBs.
Imported Objects
Objects
14 total| Object Name |
|---|
fastPathDHCPClientPrivateThe Ubiquiti Private MIB for EdgeSwitch DHCP Client MODULE-IDENTITY .1.3.6.1.4.1.4413.1.1.100 |
agentdhcp4ClientLeaseParameters OBJECT IDENTIFIER .1.3.6.1.4.1.4413.1.1.100.1 |
agentdhcp4ClientLeaseParametersTableDisplays DHCP Client Lease Information. SEQUENCE OF Agentdhcp4ClientLeaseParametersEntry .1.3.6.1.4.1.4413.1.1.100.1.1 |
agentdhcp4ClientLeaseParametersEntryInformation about a table entry. Agentdhcp4ClientLeaseParametersEntry .1.3.6.1.4.1.4413.1.1.100.1.1.1 |
agentdhcp4ClientInterfaceIndexThe Interface index on which the IP address was leased by the DHCP Server. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4413.1.1.100.1.1.1.1 |
agentdhcp4ClientIpAddressThe IP Address leased by the DHCP Server .ro IpAddress .1.3.6.1.4.1.4413.1.1.100.1.1.1.2 |
agentdhcp4ClientSubnetMaskThe Subnet mask of the IP Address leased by the DHCP Server .ro IpAddress .1.3.6.1.4.1.4413.1.1.100.1.1.1.3 |
agentdhcp4ClientDhcpServerAddressThe IP Address of the DHCP Server that leased the IP Address .ro IpAddress .1.3.6.1.4.1.4413.1.1.100.1.1.1.4 |
agentdhcp4ClientStateThe State of the DHCP Client on this interface .ro Enumeration .1.3.6.1.4.1.4413.1.1.100.1.1.1.5 |
agentdhcp4ClientTransactionIDThe transaction ID of the DHCP Client .ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4413.1.1.100.1.1.1.6 |
agentdhcp4ClientLeaseTimeThe time remaining since the IP address is leased by the DHCP Server.It is displayed
in days, hours, minutes and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4413.1.1.100.1.1.1.7 |
agentdhcp4ClientRenewTimeThe time remaining to send the next DHCP Renew Request by DHCP Client to renew the leased IP address. It is displayed
in days, hours, minutes and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4413.1.1.100.1.1.1.8 |
agentdhcp4ClientRebindTimeThe time remaining to start the DHCP Rebind process. It is displayed
in days, hours, minutes and seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4413.1.1.100.1.1.1.9 |
agentdhcp4ClientRetryCountThe number of times the DHCP Client sends a DHCP REQUEST message before the server responds .ro Counter32 .1.3.6.1.4.1.4413.1.1.100.1.1.1.10 |
More MIBs from Broadcom
Browse all BroadcomMIBs →SNMP MIB module
SNMP MIB module
The FASTPATH-ROUTING-MIB provides vendor-specific SNMP access to monitor and manage routing table entries, forwarding states, and interface statistics on Broadcom-based FastPath switching platforms. It exposes critical operational metrics including active route counts, protocol state transitions, and packet forwarding counters essential for troubleshooting Layer 3 forwarding performance on these proprietary hardware architectures.
The FASTPATH-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) policies, including traffic classification, marking, and queuing parameters, on Netgear FastPath-based networking hardware. This private module provides vendor-specific access to internal QoS state variables and counters that are not exposed in standard IETF DiffServ MIBs.
The EdgeSwitch-QOS-DIFFSERV-PRIVATE-MIB enables monitoring and configuration of Quality of Service (QoS) Differentiated Services (DiffServ) parameters, including traffic classification, queuing, and scheduling policies, on Ubiquiti EdgeSwitch hardware. This private MIB extension provides granular visibility into per-interface and per-queue traffic statistics and policy enforcement states not covered by standard DiffServ MIBs.
Standard SNMP MIB module defining data structures for QUANTA-LB6M-REF-MIB.