ETHER-WIS
AI MIB Summary
ETHER-WIS manages the Ethernet WAN Interface Sublayer (WIS) for 10GBASE-W optical interfaces by exposing performance counters, error statistics, and link status parameters to integrate with SONET-MIB and MAU-MIB. This module enables monitoring of physical layer attributes defined in IEEE 802.3 Clause 50, including signal quality, alignment status, and WIS-specific fault conditions for 10 Gigabit Ethernet WAN deployments.
The objects in this MIB module are used in conjunction with objects in the SONET-MIB and the MAU-MIB to manage the Ethernet WAN Interface Sublayer (WIS). The following reference is used throughout this MIB module: [IEEE 802.3 Std] refers to: IEEE Std 802.3, 2000 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications', as amended by IEEE Std 802.3ae-2002, 'IEEE Standard for Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Media Access Control (MAC) Parameters, Physical Layer and Management Parameters for 10 Gb/s Operation', 30 August 2002. Of particular interest are Clause 50, 'WAN Interface Sublayer (WIS), type 10GBASE-W', Clause 30, '10Mb/s, 100Mb/s, 1000Mb/s, and 10Gb/s MAC Control, and Link Aggregation Management', and Clause 45, 'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3637; see the RFC itself for full legal notices.
Main OID:
etherWisMIB.1.3.6.1.2.1.10.134
33
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
etherWisMIBThe objects in this MIB module are used in conjunction with objects in the SONET-MIB and the MAU-MIB to manage the Ethernet WAN Interface Sublayer (WIS). The following reference is used throughout this MIB module: [IEEE 802.3 Std] refers to: IEEE Std 802.3, 2000 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications', as amended by IEEE Std 802.3ae-2002, 'IEEE Standard for Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Media Access Control (MAC) Parameters, Physical Layer and Management Parameters for 10 Gb/s Operation', 30 August 2002. Of particular interest are Clause 50, 'WAN Interface Sublayer (WIS), type 10GBASE-W', Clause 30, '10Mb/s, 100Mb/s, 1000Mb/s, and 10Gb/s MAC Control, and Link Aggregation Management', and Clause 45, 'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3637; see the RFC itself for full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.10.134 |
etherWisObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.134.1 |
etherWisDevice OBJECT IDENTIFIER .1.3.6.1.2.1.10.134.1.1 |
etherWisDeviceTableThe table for Ethernet WIS devices SEQUENCE OF EtherWisDeviceEntry .1.3.6.1.2.1.10.134.1.1.1 |
etherWisDeviceEntryAn entry in the Ethernet WIS device table. For each instance of this object there MUST be a corresponding instance of sonetMediumEntry. EtherWisDeviceEntry .1.3.6.1.2.1.10.134.1.1.1.1 |
etherWisDeviceTxTestPatternModeThis variable controls the transmit test pattern mode. The value none(1) puts the the WIS transmit path into the normal operating mode. The value squareWave(2) puts the WIS transmit path into the square wave test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.1. The value prbs31(3) puts the WIS transmit path into the PRBS31 test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.2. The value mixedFrequency(4) puts the WIS transmit path into the mixed frequency test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.3. Any attempt to set this object to a value other than none(1) when the corresponding instance of ifAdminStatus has the value up(1) MUST be rejected with the error inconsistentValue, and any attempt to set the corresponding instance of ifAdminStatus to the value up(1) when an instance of this object has a value other than none(1) MUST be rejected with the error inconsistentValue.rw Enumeration .1.3.6.1.2.1.10.134.1.1.1.1.1 |
etherWisDeviceRxTestPatternModeThis variable controls the receive test pattern mode. The value none(1) puts the the WIS receive path into the normal operating mode. The value prbs31(3) puts the WIS receive path into the PRBS31 test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.2. The value mixedFrequency(4) puts the WIS receive path into the mixed frequency test pattern mode described in [IEEE 802.3 Std.] subclause 50.3.8.3. Any attempt to set this object to a value other than none(1) when the corresponding instance of ifAdminStatus has the value up(1) MUST be rejected with the error inconsistentValue, and any attempt to set the corresponding instance of ifAdminStatus to the value up(1) when an instance of this object has a value other than none(1) MUST be rejected with the error inconsistentValue.rw Enumeration .1.3.6.1.2.1.10.134.1.1.1.1.2 |
etherWisDeviceRxTestPatternErrorsThis object counts the number of errors detected when the WIS receive path is operating in the PRBS31 test pattern mode. It is reset to zero when the WIS receive path initially enters that mode, and it increments each time the PRBS pattern checker detects an error as described in [IEEE 802.3 Std.] subclause 50.3.8.2 unless its value is 65535, in which case it remains unchanged. This object is writeable so that it may be reset upon explicit request of a command generator application while the WIS receive path continues to operate in PRBS31 test pattern mode.rw Gauge32 ( 0..65535 ) .1.3.6.1.2.1.10.134.1.1.1.1.3 |
etherWisSection OBJECT IDENTIFIER .1.3.6.1.2.1.10.134.1.2 |
etherWisSectionCurrentTableThe table for the current state of Ethernet WIS sections. SEQUENCE OF EtherWisSectionCurrentEntry .1.3.6.1.2.1.10.134.1.2.1 |
etherWisSectionCurrentEntryAn entry in the etherWisSectionCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetSectionCurrentEntry. EtherWisSectionCurrentEntry .1.3.6.1.2.1.10.134.1.2.1.1 |
etherWisSectionCurrentJ0TransmittedThis is the 16-octet section trace message that is transmitted in the J0 byte. The value SHOULD be '89'h followed by fifteen octets of '00'h (or some cyclic shift thereof) when the section trace function is not used, and the implementation SHOULD use that value (or a cyclic shift thereof) as a default if no other value has been set.rw OCTET STRING .1.3.6.1.2.1.10.134.1.2.1.1.1 |
etherWisSectionCurrentJ0ReceivedThis is the 16-octet section trace message that was most recently received in the J0 byte.ro OCTET STRING .1.3.6.1.2.1.10.134.1.2.1.1.2 |
etherWisObjectsPath OBJECT IDENTIFIER .1.3.6.1.2.1.10.134.2 |
etherWisPath OBJECT IDENTIFIER .1.3.6.1.2.1.10.134.2.1 |
etherWisPathCurrentTableThe table for the current state of Ethernet WIS paths. SEQUENCE OF EtherWisPathCurrentEntry .1.3.6.1.2.1.10.134.2.1.1 |
etherWisPathCurrentEntryAn entry in the etherWisPathCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetPathCurrentEntry. EtherWisPathCurrentEntry .1.3.6.1.2.1.10.134.2.1.1.1 |
etherWisPathCurrentStatusThis variable indicates the current status of the path payload with a bit map that can indicate multiple defects at once. The bit positions are assigned as follows: etherWisPathLOP(0) This bit is set to indicate that an LOP-P (Loss of Pointer - Path) defect is being experienced. Note: when this bit is set, sonetPathSTSLOP MUST be set in the corresponding instance of sonetPathCurrentStatus. etherWisPathAIS(1) This bit is set to indicate that an AIS-P (Alarm Indication Signal - Path) defect is being experienced. Note: when this bit is set, sonetPathSTSAIS MUST be set in the corresponding instance of sonetPathCurrentStatus. etherWisPathPLM(1) This bit is set to indicate that a PLM-P (Payload Label Mismatch - Path) defect is being experienced. Note: when this bit is set, sonetPathSignalLabelMismatch MUST be set in the corresponding instance of sonetPathCurrentStatus. etherWisPathLCD(3) This bit is set to indicate that an LCD-P (Loss of Codegroup Delination - Path) defect is being experienced. Since this defect is detected by the PCS and not by the path layer itself, there is no corresponding bit in sonetPathCurrentStatus.ro Bits .1.3.6.1.2.1.10.134.2.1.1.1.1 |
etherWisPathCurrentJ1TransmittedThis is the 16-octet path trace message that is transmitted in the J1 byte. The value SHOULD be '89'h followed by fifteen octets of '00'h (or some cyclic shift thereof) when the path trace function is not used, and the implementation SHOULD use that value (or a cyclic shift thereof) as a default if no other value has been set.rw OCTET STRING .1.3.6.1.2.1.10.134.2.1.1.1.2 |
etherWisPathCurrentJ1ReceivedThis is the 16-octet path trace message that was most recently received in the J1 byte.ro OCTET STRING .1.3.6.1.2.1.10.134.2.1.1.1.3 |
etherWisFarEndPath OBJECT IDENTIFIER .1.3.6.1.2.1.10.134.2.2 |
etherWisFarEndPathCurrentTableThe table for the current far-end state of Ethernet WIS paths. SEQUENCE OF EtherWisFarEndPathCurrentEntry .1.3.6.1.2.1.10.134.2.2.1 |
etherWisFarEndPathCurrentEntryAn entry in the etherWisFarEndPathCurrentTable. For each instance of this object there MUST be a corresponding instance of sonetFarEndPathCurrentEntry. EtherWisFarEndPathCurrentEntry .1.3.6.1.2.1.10.134.2.2.1.1 |
etherWisFarEndPathCurrentStatusThis variable indicates the current status at the far end of the path using a bit map that can indicate multiple defects at once. The bit positions are assigned as follows: etherWisFarEndPayloadDefect(0) A far end payload defect (i.e., far end PLM-P or LCD-P) is currently being signaled in G1 bits 5-7. etherWisFarEndServerDefect(1) A far end server defect (i.e., far end LOP-P or AIS-P) is currently being signaled in G1 bits 5-7. Note: when this bit is set, sonetPathSTSRDI MUST be set in the corresponding instance of sonetPathCurrentStatus.ro Bits .1.3.6.1.2.1.10.134.2.2.1.1.1 |
etherWisConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.134.3 |
etherWisGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.134.3.1 |
etherWisDeviceGroupBasicA collection of objects that support test features required of all WIS devices. Unknown .1.3.6.1.2.1.10.134.3.1.1 |
etherWisDeviceGroupExtraA collection of objects that support optional WIS device test features. Unknown .1.3.6.1.2.1.10.134.3.1.2 |
etherWisSectionGroupA collection of objects that provide required information about a WIS section. Unknown .1.3.6.1.2.1.10.134.3.1.3 |
etherWisPathGroupA collection of objects that provide required information about a WIS path. Unknown .1.3.6.1.2.1.10.134.3.1.4 |
etherWisFarEndPathGroupA collection of objects that provide required information about the far end of a WIS path. Unknown .1.3.6.1.2.1.10.134.3.1.5 |
etherWisCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.134.3.2 |
etherWisComplianceThe compliance statement for interfaces that include the Ethernet WIS. Compliance with the following external compliance statements is prerequisite: MIB Module Compliance Statement ---------- -------------------- IF-MIB ifCompliance3 IF-INVERTED-STACK-MIB ifInvCompliance EtherLike-MIB dot3Compliance2 MAU-MIB mauModIfCompl3 Unknown .1.3.6.1.2.1.10.134.3.2.1 |