ESSENTIAL-ODS-ESS2000-HIPPI-SWITCH-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ESSENTIAL-ODS-ESS2000-HIPPI-SWITCH-MIB.
65
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
65 total| Object Name |
|---|
essentialCommunications OBJECT IDENTIFIER .1.3.6.1.4.1.2159 |
RFC1155-SMI Unknown .1.3.6.1.4.1.2159 |
ecRoot OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1 |
ecProducts OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3 |
ess2000MIB OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3.2 |
switch OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3.2.1 |
switchDescriptionReturns the description, vendor,
and version numbers of the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.2.1.1 |
switchNumOfPortsThe number of slots in this switch.
(Max number of media access cards).ro Gauge .1.3.6.1.4.1.2159.1.3.2.1.2 |
switchSensorsThis value returns the status of the temperature and
power supply sensors. From least to most significant byte the values
are power supply 1-3 with the most signficant byte being the over
temperature sensor.
0 indicates the sensor is autodectable and not installed.
1 indicates the sensor is OK.
2 indicates the sensor is not OK.ro DisplayString .1.3.6.1.4.1.2159.1.3.2.1.3 |
switchControlCard OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3.2.2 |
sccDescriptionThe model, vendor, and version number
of the switch control card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.2.2.1 |
sccDateTimeThe date/time in the real time clock.
Format: yyyymmddhhmmssrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.2.2.2 |
sccAdminStatusThe desired state of the switch.
1 indicates switch is up.
2 will make the switch reset.rw INTEGER .1.3.6.1.4.1.2159.1.3.2.2.3 |
sccOperStatusThe current state of the switch.
1 indicates the switch is up.
2 indicates the switch is resetting. SNMP operations can not occur when the switch is resetting.
3 indicates a busy switch. SNMP operations can not occur when the switch is busy.ro INTEGER .1.3.6.1.4.1.2159.1.3.2.2.4 |
mediaInterfaceCards OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3.2.3 |
backPlaneTableThis table represent all of the slots in a HIPPI switch.
None of the rows can be added to or deleted by the user. SEQUENCE OF BackPlaneEntry .1.3.6.1.4.1.2159.1.3.2.3.1 |
backPlaneEntryA row in the table describing one slot in the switch backplane. BackPlaneEntry .1.3.6.1.4.1.2159.1.3.2.3.1.1 |
backPlaneIndexThe table index for this slot on the backplane. Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.1 |
backPlaneNumberThe slot number as seen printed on the switch
(backPlaneIndex + 1)ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.2 |
backPlaneCardThe type of MIC present in this slot
of the backplane on the switch
0 No MIC
1 Unknown MIC
2 Parallel MIC
3 Serial MICro INTEGER .1.3.6.1.4.1.2159.1.3.2.3.1.1.3 |
mICPowerUpInitError1 if error detected by MIC on start-up, else 0.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.4 |
mICHippiParityBurstErrorType of parity error.
0 None
1 XDeMux (Transmitting)
2 XMux (Receiving)ro INTEGER .1.3.6.1.4.1.2159.1.3.2.3.1.1.5 |
mICLinkReadyValid the SMIC only. 1 if link ready asserted, else 0.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.6 |
mICSourceInterconnectSource interconnect is valid for the PMIC only.
1 if interconnect is true else 0ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.7 |
mICSourceRequest1 if source request is asserted else 0.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.8 |
mICSourceConnect1 if source connect is asserted else 0.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.9 |
mICSourceLastConnectAttempt0 if no last connect attempt.
1 if last source request was successful or no last connect.
2 Connection underway.
3 if last connect was rejected downstream.ro INTEGER .1.3.6.1.4.1.2159.1.3.2.3.1.1.10 |
mICDestinationInterconnect1 if destination interconnect is asserted else 0.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.11 |
mICDestinationRequest1 if destination request is asserted else 0.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.12 |
mICDestinationConnect1 if destination connect is asserted else 0.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.13 |
mICByteCounterOverflowThe number of times the byte counter has over-flowed.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.14 |
mICNumberOfBytesThe number of bytes that have passed through the MIC.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.15 |
mICNumberOfPacketsThe number of times packets has been asserted.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.16 |
mICConnectsSuccessfulThe number of times this MIC has connected since reset.ro Gauge .1.3.6.1.4.1.2159.1.3.2.3.1.1.17 |
sourceRoutes OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3.2.4 |
srcRouteTableThis table holds all of the source routes for this switch.
FORMAT: OutputPort InputPortList Status.
Output port is 0 to 31
Input port is 0 to 31
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
Status is 0 (disabled) or 1 (enabled) SEQUENCE OF SrcRouteEntry .1.3.6.1.4.1.2159.1.3.2.4.1 |
srcRouteEntryOne row in the source route table. SrcRouteEntry .1.3.6.1.4.1.2159.1.3.2.4.1.1 |
srcIndexThe row number for this row of the table.ro Gauge .1.3.6.1.4.1.2159.1.3.2.4.1.1.1 |
srcRouteInPortAccessFORMAT: Shows the input port access for 1 output port.
Each instance is the output port number.
Each 32 bit hex value displays the input port access for 32 ports.
with port 32 on the left and port 0 on the right.
Each bit is set for and enabled port, clear for a disabled one.
For example 80000000 indicates input port 31 is enabled for this output portro DisplayString .1.3.6.1.4.1.2159.1.3.2.4.1.1.2 |
srcRouteOutPortAccessFORMAT: Shows the output port access for 1 input port.
Each instance is the input port number.
Each 32 bit hex value displays the output port access for 32 ports.
with port 32 on the left and port 0 on the right.
Each bit is set for and enabled port, clear for a disabled one.
For example 80000000 indicates output port 31 is enabled for this input portro DisplayString .1.3.6.1.4.1.2159.1.3.2.4.1.1.3 |
srcRouteWriteSetting this variable alters source routes.
FORMAT: OutputPortList InputPortList Status.
Output port is 0 to 31
Input port is 0 to 31
Status is 0 (disabled) or 1 (enabled)
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.2.4.2 |
srcSaveRestoreThis will save or restore all of the source routes.
Writting a 0 is a no operation.
Writting a 1 saves all source routes on the switch.
Writting a 2 restores all source routes on the switch.rw INTEGER .1.3.6.1.4.1.2159.1.3.2.4.3 |
logicalAddressRoutes OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3.2.5 |
destRouteTableThis table holds all of destination routes (logical
address routes) for this switch.
FORMAT: LogicalAddress InputPortList Huntgroup.
LogicalAddress is 0 to 4095.
Input port is 0 to 31
Huntgroup is 0 to 31.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. SEQUENCE OF DestRouteEntry .1.3.6.1.4.1.2159.1.3.2.5.1 |
destRouteEntryA row in the destination route table. DestRouteEntry .1.3.6.1.4.1.2159.1.3.2.5.1.1 |
destIndexThe index for this row of the table.ro Gauge .1.3.6.1.4.1.2159.1.3.2.5.1.1.1 |
destRouteOne Destination Route.
FORMAT: LogicalAddress InputPortList Huntgroup.
LogicalAddress is 0 to 4095.
Input port is 0 to 31.
Huntgroup is 0 to 31.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.ro DisplayString .1.3.6.1.4.1.2159.1.3.2.5.1.1.2 |
destRouteWriteSetting this variable will alter the desitination routes.
FORMAT: LogicalAddressList Huntgroup InputPortList.
LogicalAddress is 0 to 4095.
Huntgroup is 0 to 31. 31 will disable this route.
Input port is 0 to 31.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.2.5.2 |
pathRouteTableThis table holds all of pathway routes for this switch.
FORMAT: PathwayAddressList InputPortList outputPort
PathwaAddress is 0 to 4095.
Input port is 0 to 31
outputPort is 0 to 31.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. SEQUENCE OF PathRouteEntry .1.3.6.1.4.1.2159.1.3.2.5.3 |
pathRouteEntryA row in the pathway route table. PathRouteEntry .1.3.6.1.4.1.2159.1.3.2.5.3.1 |
pathIndexThe index for this row of the table.ro Gauge .1.3.6.1.4.1.2159.1.3.2.5.3.1.1 |
pathRouteOne pathway logical address route.
FORMAT: LogicalAddress InputPortList outputPort.
LogicalAddress is 0 to 4095.
Input port is 0 to 31.
outputPort is 0 to 31.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.ro DisplayString .1.3.6.1.4.1.2159.1.3.2.5.3.1.2 |
pathRouteWriteSetting this variable will alter the pathway logical routes.
FORMAT: LogicalAddressList Huntgroup InputPortList.
LogicalAddress is 0 to 4095.
Huntgroup is 0 to 31. 31 will disable this route.
Input port is 0 to 31.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.2.5.4 |
routesSaveRestoreThis saves and restores the route information.
0 is a no operation.
1 saves all destination routes on the switch.
2 restores all destination routes on the switch.rw INTEGER .1.3.6.1.4.1.2159.1.3.2.5.5 |
routeDisableSetting this variable will disable logical address routes.
FORMAT: LogicalAddressList InputPortList.
LogicalAddress is 0 to 4095 (0x0 to 0xfff).
Input port is 0 to 31 (0x0 to 0x1f).
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.2.5.6 |
huntGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3.2.6 |
hGTableThis table holds all of the huntgroups for this switch.
FORMAT: Huntgroup ( OutportList )
Huntgroup is 0 to 31.
OutportList is an orderd list of output ports in Huntgroup. SEQUENCE OF HGEntry .1.3.6.1.4.1.2159.1.3.2.6.1 |
hGEntryA row in the huntgroup table. HGEntry .1.3.6.1.4.1.2159.1.3.2.6.1.1 |
hgThe huntgroup number.ro Gauge .1.3.6.1.4.1.2159.1.3.2.6.1.1.1 |
hgListThe definition of one Huntgroup.
FORMAT: Huntgroup ( OutportList )
Huntgroup is 0 to 31.
OutportList is an orderd list of output ports in Huntgroup.ro DisplayString .1.3.6.1.4.1.2159.1.3.2.6.1.1.2 |
hgWriteSetting this variable will alter the huntgroup table by
setting every huntgroup in list to include outPortList.
FORMAT: HuntgroupList OutportList
Huntgroup is 0 to 31.
Outport is 0 to 31.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.2.6.2 |
hgSaveRestoreThis saves and restores the hunt groups.
0 is a no operation.
1 saves all hunt group information on the switch.
2 restores all hunt group information on the switch.rw INTEGER .1.3.6.1.4.1.2159.1.3.2.6.3 |
switchEvents OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3.2.7 |
switchSensorWarningThis warns that switch sensor(s) are changing status.
One 32 bit hex values is returned and is ASCII encoded as follows:
abcd where each character is a byte (8 bit value).
a is the over temperature sensor.
b, c, and d are power sensors 3 to 1 respectively.
Each byte contains the following information:
0 (30 hex) Sensor is autodetectable, but it is not installed.
1 (32 hex) Sensor (if installed) has no problem
2 (33 hex) Sensor (if installed) has a sensor warning.
3-15 not defined.
For example, the hex values 0021 means over temperature sensor is not
installed, power supply sensor 3 is not installed, power supply sensor
2 has indicated power supply failure, and power supply 1 is ok. TRAP-TYPE .1.3.6.1.4.1.2159.1.3.2.7.0.1 |
ecExperimental OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.6 |