ESSENTIAL-COMMUNICATIONS-HIPPI-SWITCH
AI MIB Summary
Standard SNMP MIB module defining data structures for ESSENTIAL-COMMUNICATIONS-HIPPI-SWITCH.
55
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
55 total| Object Name |
|---|
essentialCommunications OBJECT IDENTIFIER .1.3.6.1.4.1.2159 |
RFC1155-SMI Unknown .1.3.6.1.4.1.2159 |
ecRoot OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1 |
ecProducts OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3 |
hippiSwitchMIBv103 OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3.1 |
switchObjs OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.3.1.1 |
switchDescriptionReturns the description, vendor,
and version numbers of the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.1 |
switchNumOfPortsThe number of slots in this switch.
(Max number of media access cards).ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.2 |
sccDescriptionThe model, vendor, and version number
of the switch control card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.3 |
sccDateTimeThe date/time in the real time clock.
Format: yyyymmddhhmmss.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.4 |
sccAdminStatusThe desired state of the switch.rw Enumeration .1.3.6.1.4.1.2159.1.3.1.1.5 |
sccOperStatusThe current state of the switch.
SNMP operations can not occur when the switch is busy.
SNMP operations can not occur when the switch is resetting.ro Enumeration .1.3.6.1.4.1.2159.1.3.1.1.6 |
backPlaneTableThis table represent all of the slots in a HIPPI switch.
None of the rows can be added to or deleted by the user. SEQUENCE OF BackPlaneEntry .1.3.6.1.4.1.2159.1.3.1.1.7 |
backPlaneEntryA row in the table describing one slot in the switch backplane. BackPlaneEntry .1.3.6.1.4.1.2159.1.3.1.1.7.1 |
backPlaneIndexThe table index for this slot on the backplane. Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.1 |
backPlaneNumberThe slot number as seen printed on the switch
(backPlaneIndex + 1)ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.2 |
backPlaneCardThe type of MIC present in this slot of the backplane on
the switchro Enumeration .1.3.6.1.4.1.2159.1.3.1.1.7.1.3 |
mICPowerUpInitErrorTrue if error detected by MIC on start-up.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.4 |
mICHippiParityBurstErrorValid the SMIC only. Type of parity error.ro Gauge -- { None(0), XDeMux(1), XMux(2), XError(3) } .1.3.6.1.4.1.2159.1.3.1.1.7.1.5 |
mICLinkReadyValid the SMIC only. True if link ready asserted.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.6 |
mICSourceInterconnectSource interconnect is valid for the PMIC only.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.7 |
mICSourceRequestTrue if source request is asserted.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.8 |
mICSourceConnectTrue if source connect is asserted.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.9 |
mICSourceLastConnectAttemptTrue if last source request was successful.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.10 |
mICDestinationInterconnectTrue if destination interconnect is asserted.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.11 |
mICDestinationRequestTrue if destination request is asserted.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.12 |
mICDestinationConnectTrue if destination connect is asserted.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.13 |
mICByteCounterOverflowThe number of times the byte counter has over-flowed.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.14 |
mICNumberOfBytesThe number of bytes that have passed through the MIC.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.15 |
mICNumberOfPacketsThe number of times packets has been asserted.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.16 |
mICConnectsSuccessfulThe number of times this MIC has connected since reset.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.7.1.17 |
sourceRouteTableThis table holds all of the source routes for this switch.
FORMAT: OutputPort InputPortList Status.
Output port is 0 to 15
Input port is 0 to 15
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
Status is 0 (disabled) or 1 (enabled) SEQUENCE OF SourceRouteEntry .1.3.6.1.4.1.2159.1.3.1.1.8 |
sourceRouteEntryOne row in the source route table. SourceRouteEntry .1.3.6.1.4.1.2159.1.3.1.1.8.1 |
srcIndexThe row number for this row of the table.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.8.1.1 |
srcRouteOne source route.
FORMAT: OutputPort InputPortList Status.
Output port is 0 to 15
Input port is 0 to 15
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
Status is 0 (disabled) or 1 (enabled)ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.8.1.2 |
srcWriteRowSetting this variable alters source routes.
FORMAT: OutputPortList InputPortList Status.
Output port is 0 to 15
Input port is 0 to 15
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.
Status is 0 (disabled) or 1 (enabled)rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.9 |
destRouteTableThis table holds all of destination routes (logical
address routes) for this switch.
FORMAT: LogicalAddress InputPortList Huntgroup.
LogicalAddress is 0 to 4095.
Input port is 0 to 15
Huntgroup is 0 to 31.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2. SEQUENCE OF DestRouteEntry .1.3.6.1.4.1.2159.1.3.1.1.10 |
destRouteEntryA row in the destination route table. DestRouteEntry .1.3.6.1.4.1.2159.1.3.1.1.10.1 |
destIndexThe index for this row of the table.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.10.1.1 |
destRouteOne Destination Route.
FORMAT: LogicalAddress InputPortList Huntgroup.
LogicalAddress is 0 to 4095.
Input port is 0 to 15.
Huntgroup is 0 to 31.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.10.1.2 |
destWriteRowSetting this variable will alter the desitination routes.
FORMAT: LogicalAddressList Huntgroup InputPortList.
LogicalAddress is 0 to 4095.
Huntgroup is 0 to 31. 31 will disable this route.
Input port is 0 to 15.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.11 |
huntGroupTableThis table holds all of the huntgroups for this switch.
FORMAT: Huntgroup ( OutportList )
Huntgroup is 0 to 31.
OutportList is an orderd list of output ports in Huntgroup. SEQUENCE OF HuntGroupEntry .1.3.6.1.4.1.2159.1.3.1.1.12 |
huntGroupEntryA row in the huntgroup table. HuntGroupEntry .1.3.6.1.4.1.2159.1.3.1.1.12.1 |
hgThe huntgroup number.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.12.1.1 |
hgOutPortListThe definition of one Huntgroup.
FORMAT: Huntgroup ( OutportList )
Huntgroup is 0 to 31.
OutportList is an orderd list of output ports in Huntgroup.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.12.1.2 |
hgLWriteRowSetting this variable will alter the huntgroup table by
setting every huntgroup in list to include outPortList.
FORMAT: HuntgroupList OutportList
Huntgroup is 0 to 31.
Outport is 0 to 15 and 16. 16 will clear the huntgroup.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.13 |
huntGroupOrderTableThis table holds all of the huntgroup order information
for this switch. i.e. The order huntgroups are processed
in when more than one huntgroup contends for the same output
port.
FORMAT: OutputPort HuntGroupList
OutputPort is 0 to 15.
Huntgroup is 0 to 31.
List is an ordered list of huntgroups. SEQUENCE OF HuntGroupOrderEntry .1.3.6.1.4.1.2159.1.3.1.1.14 |
huntGroupOrderEntryOne record on an output port's huntgroup priority. HuntGroupOrderEntry .1.3.6.1.4.1.2159.1.3.1.1.14.1 |
hgOrderIndexThe backplane slot number containing output port.ro Gauge .1.3.6.1.4.1.2159.1.3.1.1.14.1.1 |
hgOrderListAn ordered list of an output port's huntgroup priority.
FORMAT: OutputPort HuntGroupList
OutputPort is 0 to 15.
Huntgroup is 0 to 31.
List is an ordered list of huntgroups.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.14.1.2 |
hgOWriteRowSetting this variable will alter the huntgroup order table.
FORMAT: OutputPort HuntGroupList
Output port is 0 to 15.
Huntgroup is 0 to 31. Huntgroup must contain output port in its output port list.
List is NUMBER or NUMBER1-NUMBER2 where NUMBER1 < NUMBER2.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2159.1.3.1.1.15 |
hgSaveRestoreWritting a 1 saves all hunt group information on the switch.
Writting a 2 restores all hunt group information on the switch.rw Enumeration .1.3.6.1.4.1.2159.1.3.1.1.16 |
routesSaveRestoreWritting a 1 saves all source/destination routes on the switch.
Writting a 2 restores all source/destination routes on the switch.rw Enumeration .1.3.6.1.4.1.2159.1.3.1.1.17 |
ecExperimental OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.6 |
hippiSwitchMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2159.1.6.1 |