EQUIPE-SYSTEM-MIB
AI MIB Summary
The EQUIPE-SYSTEM-MIB provides monitoring and management capabilities for Equipe Systems hardware and software platforms, exposing standard system metrics such as CPU utilization, memory usage, interface statistics, and device operational status via SNMP. This module enables network administrators to track system health, performance thresholds, and fault conditions specific to Equipe network appliances.
This is the Equipe system MIB module.
Main OID:
eqSystemMib.1.3.6.1.4.1.5022.1
145
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
145 total| Object Name |
|---|
equipe OBJECT IDENTIFIER .1.3.6.1.4.1.5022 |
eqSystemMibThis is the Equipe system MIB module. MODULE-IDENTITY .1.3.6.1.4.1.5022.1 |
eqSysProducts OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.1 |
eqSysProductE3200 OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.1.1 |
eqSysSystemGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.2 |
eqSysSystem OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.2.1 |
eqSysSystemIdThe unique value assigned to each chassis at manufacturing time.ro OCTET STRING .1.3.6.1.4.1.5022.1.2.1.1 |
eqSysPhysEntLastChangeTimeThe value of sysUpTime when the last physical entity change event occurred (e.g. a module was inserted into the system).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5022.1.2.1.2 |
eqSysConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.2.2 |
eqSysCfgCopyConfigFileActionA read of this object always returns the value other(1). Setting this object to copyCfgFile(2) will initiate a save of the current configuration and a copy of the config file on the local filesystem. The progress of this request can be monitored by polling the eqSysCfgCopyConfigFileStatus object. The name of the saved config file, including absolute filesystem path, is stored in the eqSysCfgSavedFilename attribute.rw Enumeration .1.3.6.1.4.1.5022.1.2.2.1 |
eqSysCfgCopyConfigFileStatusThis object is used to monitor the progress of a request to save and copy the current config file on the local filesystem. The user may also do a set to reset this object to value copyCfgIdle(1).rw Enumeration .1.3.6.1.4.1.5022.1.2.2.2 |
eqSysCfgSavedFilenameThe name assigned to the saved config file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5022.1.2.2.3 |
eqEidReqTableThis table is used to get equipe id values. SEQUENCE OF EqEidReqEntry .1.3.6.1.4.1.5022.1.2.3 |
eqEidReqEntryAn eid alloc entry. EqEidReqEntry .1.3.6.1.4.1.5022.1.2.3.1 |
eqEidReqIndexThe unique value to identify this entry.ro INTEGER .1.3.6.1.4.1.5022.1.2.3.1.1 |
eqEidReqUserA textual string to identify the owner of this entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5022.1.2.3.1.2 |
eqEidReqCountThe count of equipe id's requested.rw INTEGER .1.3.6.1.4.1.5022.1.2.3.1.3 |
eqEidReqCountAllocThe count of equipe id's actually allocated.ro INTEGER .1.3.6.1.4.1.5022.1.2.3.1.4 |
eqEidReqActionA read of this object always returns the value other(1). Setting this object to alloc(2) will cause the agent to allocate new eid's. The number of eid's to allocate is determined by the value of eqEidReqCount object. The agent will create an entry in the eqEidResultTable containing the allocated eid's. The NMS can retrieve these values by doing a getnext using the eqEidReqIndex for this entry as the key.rw Enumeration .1.3.6.1.4.1.5022.1.2.3.1.5 |
eqEidReqActionStatusThe result of the action requested.ro Enumeration .1.3.6.1.4.1.5022.1.2.3.1.6 |
eqEidReqRowStatusThis object is used to create and delete entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5022.1.2.3.1.7 |
eqEidResTableThis table contains entries for allocated eid's. SEQUENCE OF EqEidResEntry .1.3.6.1.4.1.5022.1.2.4 |
eqEidResEntryAn eid result entry. EqEidResEntry .1.3.6.1.4.1.5022.1.2.4.1 |
eqEidResIndexThe id value to identify this entry.ro INTEGER .1.3.6.1.4.1.5022.1.2.4.1.1 |
eqEidResDataAn array holding the allocated eid values.ro OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.2.4.1.2 |
eqSysModuleGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.3 |
eqSysModule OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.3.1 |
eqModuleTableThis table contains module info. SEQUENCE OF EqModuleEntry .1.3.6.1.4.1.5022.1.3.1.1 |
eqModuleEntryA module entry. EqModuleEntry .1.3.6.1.4.1.5022.1.3.1.1.1 |
eqModuleEidThe unique id assigned to the module.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.1.1.1 |
eqModuleShelfIdThe shelf id in which this module is located.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.1.1.2 |
eqModuleSlotIdThe slot id in which this module is located.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.1.1.3 |
eqModuleTypeThe type of module.ro EqModuleType .1.3.6.1.4.1.5022.1.3.1.1.1.4 |
eqModuleHwVersionThe hardware version of the module.ro OCTET STRING .1.3.6.1.4.1.5022.1.3.1.1.1.5 |
eqModuleStatusThe module status.ro EqModuleStatus .1.3.6.1.4.1.5022.1.3.1.1.1.6 |
eqModuleActionA read of this object always returns the value other(1). Setting this to reset(2) causes the module to be reset.rw Enumeration .1.3.6.1.4.1.5022.1.3.1.1.1.7 |
eqModuleHealthTableThis table contains module health info. SEQUENCE OF EqModuleHealthEntry .1.3.6.1.4.1.5022.1.3.1.2 |
eqModuleHealthEntryA module health entry. EqModuleHealthEntry .1.3.6.1.4.1.5022.1.3.1.2.1 |
eqModuleHealthStatusThe module health status.ro EqModuleHealthStatus .1.3.6.1.4.1.5022.1.3.1.2.1.1 |
eqModuleMemTotalThe total amount of sdram memory available on the module in megabytes.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.2.1.2 |
eqModuleMemUsedThe amount of used sdram memory on the module in megabytes.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.2.1.3 |
eqModuleMemUsedPercentThe amount of used sdram memory expressed as a percentage of total available memory.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.2.1.4 |
eqModuleTempThe temp of the module in degrees centigrades.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.2.1.5 |
eqModuleCpuUtilThe cpu utilization of the module as a percentage.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.2.1.6 |
eqModuleFeedStatusAThe module power feed A status.ro EqModuleFeedStatus .1.3.6.1.4.1.5022.1.3.1.2.1.7 |
eqModuleFeedStatusBThe module power feed B status.ro EqModuleFeedStatus .1.3.6.1.4.1.5022.1.3.1.2.1.8 |
eqHardDiskTableThe hard disk status table. SEQUENCE OF EqHardDiskEntry .1.3.6.1.4.1.5022.1.3.1.3 |
eqHardDiskEntryA hard disk entry. EqHardDiskEntry .1.3.6.1.4.1.5022.1.3.1.3.1 |
eqHardDiskEidThe unique id assigned to the hard disk.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.3.1.1 |
eqHardDiskShelfIdThe shelf id in which this hard disk is located.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.3.1.2 |
eqHardDiskSlotIdThe slot id in which this hard disk is located.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.3.1.3 |
eqHardDiskCapacityThe hard disk capacity in megabytes.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.3.1.4 |
eqHardDiskUsedThe percentage of hard disk in use.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.3.1.5 |
eqHardDiskUsedHiMarkThe percentage of hard disk in use which, when crossed, will trigger an eqHardDiskUsedHiMark trap to be generated.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.3.1.6 |
eqHardDiskUsedLowMarkThe percentage of hard disk in use which, when crossed, will trigger an eqHardDiskLowMark trap to be generated.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.3.1.7 |
eqFanUnitTableThe fan unit status table. SEQUENCE OF EqFanUnitEntry .1.3.6.1.4.1.5022.1.3.1.4 |
eqFanUnitEntryA fan unit entry. EqFanUnitEntry .1.3.6.1.4.1.5022.1.3.1.4.1 |
eqFanUnitEidThe unique id assigned to the fan unit.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.4.1.1 |
eqFanUnitShelfIdThe shelf id in which this fan unit is located.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.4.1.2 |
eqFanUnitSlotIdThe slot id in which this fan unit is located.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.4.1.3 |
eqFanUnitRpmThe current rpm of this fan unit.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.4.1.4 |
eqFanUnitRpmHiMarkThe fan unit rpm which, when crossed, will trigger an eqFanUnitUsedHiMark trap to be generated.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.4.1.5 |
eqFanUnitRpmLowMarkThe fan unit rpm which, when crossed, will trigger an eqFanUnitUsedLowMark trap to be generated.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.4.1.6 |
eqModuleRedTableThis table contains module redundancy info. SEQUENCE OF EqModuleRedEntry .1.3.6.1.4.1.5022.1.3.1.5 |
eqModuleRedEntryA module redundancy entry. EqModuleRedEntry .1.3.6.1.4.1.5022.1.3.1.5.1 |
eqModuleRedEidThe unique id assigned to the module.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.5.1.1 |
eqModuleRedAdminRoleThe module's configured redundancy role.ro EqModuleRedRole .1.3.6.1.4.1.5022.1.3.1.5.1.2 |
eqModuleRedOperRoleThe module's current redundancy role.ro EqModuleRedRole .1.3.6.1.4.1.5022.1.3.1.5.1.3 |
eqModuleRedPeerIdThe id of the module that is a peer to this module. The peer can be either a primary or a backup module. A value of zero indicates no peer module.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.5.1.4 |
eqModuleRedActionA read of this object always returns the value other(1). Setting this to switchRole(2) causes the module to switch role with it's peer module.rw Enumeration .1.3.6.1.4.1.5022.1.3.1.5.1.5 |
eqStratumCentTableThis table contains the central stratum timing subsystem info. SEQUENCE OF EqStratumCentEntry .1.3.6.1.4.1.5022.1.3.1.6 |
eqStratumCentEntryA central stratum timing subsystem entry. EqStratumCentEntry .1.3.6.1.4.1.5022.1.3.1.6.1 |
eqStratumCentEidThe unique id assigned to the module containing the central stratum timing subsystem.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.6.1.1 |
eqStratumCentStatusThe status of the central stratum timing subsystem.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.6.1.2 |
eqStratumCentRedStatusThe redundancy status of the central stratum timing subsystem.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.6.1.3 |
eqStratumCentLevelThe level of the central stratum timing subsystem.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.6.1.4 |
eqStratumCentPrimaryRefStatusThe primary reference status of the central stratum timing subsystem.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.6.1.5 |
eqStratumCentSecondaryRefStatusThe secondary reference status of the central stratum timing subsystem.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.6.1.6 |
eqStratumCentStatusActionThis object is used to change the status of the central stratum timing subsystem. A read of this object always returns the value other(1).rw Enumeration .1.3.6.1.4.1.5022.1.3.1.6.1.7 |
eqStratumCentRedActionThis object is used to change the redundancy status of the central stratum timing subsystem. A read of this object always returns the value other(1).rw Enumeration .1.3.6.1.4.1.5022.1.3.1.6.1.8 |
eqStratumLocalTableThis table contains the local stratum timing subsystem info. SEQUENCE OF EqStratumLocalEntry .1.3.6.1.4.1.5022.1.3.1.7 |
eqStratumLocalEntryA local stratum timing subsystem entry. EqStratumLocalEntry .1.3.6.1.4.1.5022.1.3.1.7.1 |
eqStratumLocalEidThe unique id assigned to the module containing the local stratum timing subsystem.ro INTEGER .1.3.6.1.4.1.5022.1.3.1.7.1.1 |
eqStratumLocalInputA1StatusThe input A1 status of the local stratum timing subsystem.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.7.1.2 |
eqStratumLocalInputA2StatusThe input A2 status of the local stratum timing subsystem.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.7.1.3 |
eqStratumLocalInputB1StatusThe input B1 status of the local stratum timing subsystem.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.7.1.4 |
eqStratumLocalInputB2StatusThe input B2 status of the local stratum timing subsystem.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.7.1.5 |
eqStratumLocalInputUsedThis object indicates which of the two inputs on the local startum timing subsystem is currently being used.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.7.1.6 |
eqStratumLocalRecoveredRefStatusThis object indicates if this local startum timing subsystem is providing a reference source to either of the two inputs.ro Enumeration .1.3.6.1.4.1.5022.1.3.1.7.1.7 |
eqStratumLocalStatusActionThis object is used to change the input being used by the local stratum timing subsystem. A read of this object always returns the value other(1).rw Enumeration .1.3.6.1.4.1.5022.1.3.1.7.1.8 |
eqSysFaultGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.4 |
eqSysFault OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.4.1 |
eqFaultTableThis table contains fault info. SEQUENCE OF EqFaultEntry .1.3.6.1.4.1.5022.1.4.1.1 |
eqFaultEntryA fault entry. EqFaultEntry .1.3.6.1.4.1.5022.1.4.1.1.1 |
eqFaultDomainThe domain of the entity handling the fault.ro INTEGER .1.3.6.1.4.1.5022.1.4.1.1.1.1 |
eqFaultHandleThe handle of the fault within the domain.ro INTEGER .1.3.6.1.4.1.5022.1.4.1.1.1.2 |
eqFaultClassThe class field of the fault descriptor.ro EqFaultClass .1.3.6.1.4.1.5022.1.4.1.1.1.3 |
eqFaultSubclassThe subclass field of the fault descriptor.ro INTEGER .1.3.6.1.4.1.5022.1.4.1.1.1.4 |
eqFaultTypeThe type field of the fault descriptor.ro INTEGER .1.3.6.1.4.1.5022.1.4.1.1.1.5 |
eqFaultInstanceThe instance field of the fault descriptor.ro INTEGER .1.3.6.1.4.1.5022.1.4.1.1.1.6 |
eqFaultSeverityThe severity of the fault.ro EqFaultSeverity .1.3.6.1.4.1.5022.1.4.1.1.1.7 |
eqFaultScopeThe scope in which the fault was handled.ro EqFaultScope .1.3.6.1.4.1.5022.1.4.1.1.1.8 |
eqFaultSwlmA textual string to identify the type of swlm if scope is swlm.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5022.1.4.1.1.1.9 |
eqFaultModuleThe EID of the physical module on which the fault occurred.ro INTEGER .1.3.6.1.4.1.5022.1.4.1.1.1.10 |
eqFaultTimeA textual string indicating the time at which the fault occurred.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5022.1.4.1.1.1.11 |
eqFaultDetailsA textual string providing additional details about the fault.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5022.1.4.1.1.1.12 |
eqSysSmsGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.5 |
eqSysSms OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.5.1 |
eqReleaseNextIdThe next available release id value.ro INTEGER .1.3.6.1.4.1.5022.1.5.1.1 |
eqReleaseRevertWriting this initiates a revert to the default release.rw EqReleaseRevert .1.3.6.1.4.1.5022.1.5.1.2 |
eqReleaseTableThis table contains installed software release status and control. SEQUENCE OF EqReleaseEntry .1.3.6.1.4.1.5022.1.5.1.3 |
eqReleaseEntryA software release entry. EqReleaseEntry .1.3.6.1.4.1.5022.1.5.1.3.1 |
eqReleaseIdA box unique number which identifies the release .ro INTEGER .1.3.6.1.4.1.5022.1.5.1.3.1.1 |
eqReleaseNameThe name of the release.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5022.1.5.1.3.1.2 |
eqReleaseVerificationStatusThe verification status of the release.ro EqReleaseVerificationStatus .1.3.6.1.4.1.5022.1.5.1.3.1.3 |
eqReleaseUpgradeScopeThe scope of an upgrade to this release with respect to the current release.ro EqReleaseUpgradeScope .1.3.6.1.4.1.5022.1.5.1.3.1.4 |
eqReleaseSchemaChangeThe state of the release.ro EqReleaseSchemaChange .1.3.6.1.4.1.5022.1.5.1.3.1.5 |
eqReleaseStateThe state of the release.ro EqReleaseState .1.3.6.1.4.1.5022.1.5.1.3.1.6 |
eqReleaseModulesVerifiedThe number of modules that have been verified.ro INTEGER .1.3.6.1.4.1.5022.1.5.1.3.1.7 |
eqReleaseNumModulesThe number of modules contained in the release.ro INTEGER .1.3.6.1.4.1.5022.1.5.1.3.1.8 |
eqReleaseBadModuleThe the name of a missing module or one with a checksum error.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5022.1.5.1.3.1.9 |
eqReleaseCommandA command to peform on the releaserw EqReleaseCommand .1.3.6.1.4.1.5022.1.5.1.3.1.10 |
eqReleaseCommandStatusThe status of a command contained in eqReleaseCommandrw EqReleaseCommandStatus .1.3.6.1.4.1.5022.1.5.1.3.1.11 |
eqReleaseSchemaVersionThe schema's version string for the releasero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5022.1.5.1.3.1.12 |
eqReleaseConfigAvailIndicates if the release has a config filero EqReleaseConfigAvail .1.3.6.1.4.1.5022.1.5.1.3.1.13 |
eqReleaseRowStatusThis object is used to create and delete entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5022.1.5.1.3.1.14 |
eqInstallTableThis table contains the paths where a new image should be installed. SEQUENCE OF EqInstallEntry .1.3.6.1.4.1.5022.1.5.1.4 |
eqInstallEntryAn install entry. EqInstallEntry .1.3.6.1.4.1.5022.1.5.1.4.1 |
eqInstallIdA box unique number which identifies the installation path.ro INTEGER .1.3.6.1.4.1.5022.1.5.1.4.1.1 |
eqInstallPathThe full name of the installation path.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5022.1.5.1.4.1.2 |
eqUpgradeStateThe current state of an upgrade.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.5022.1.5.1.5 |
eqSysIntfGrp OBJECT IDENTIFIER .1.3.6.1.4.1.5022.1.6 |
eqIntfBertTableThis table is used to initiate a Bit Error Rate Test (BERT) on a sonet port and also for reading statistics on the initiated test. SEQUENCE OF EqIntfBertEntry .1.3.6.1.4.1.5022.1.6.1 |
eqIntfBertEntryA BERT entry. EqIntfBertEntry .1.3.6.1.4.1.5022.1.6.1.1 |
eqIntfBertEidThe eid assigned to the interface.ro INTEGER .1.3.6.1.4.1.5022.1.6.1.1.1 |
eqIntfBertGeneratorStateThe current BERT generator state.ro Enumeration .1.3.6.1.4.1.5022.1.6.1.1.2 |
eqIntfBertMonitorStateThe current BERT monitor state. A value of active(1) indicates that a BERT test is currently running.ro Enumeration .1.3.6.1.4.1.5022.1.6.1.1.3 |
eqIntfBertMonitorStatusThe BERT monitor status value. Note that this object is only valid when a BERT test is running.ro Enumeration .1.3.6.1.4.1.5022.1.6.1.1.4 |
eqIntfBertMonitorOutOfSyncTimeThe total amount of time, in seconds, that the monitor has been out of synch since the BERT test was started.ro INTEGER .1.3.6.1.4.1.5022.1.6.1.1.5 |
eqIntfBertRequestedBitErrorCountThe number of bit errors the user wants inserted onto the interface. This value is used when the user issues a bit error request by a set to the eqIntfBertAction object.ro INTEGER .1.3.6.1.4.1.5022.1.6.1.1.6 |
eqIntfBertInsertedBitErrorCountThe actual number of bit errors inserted onto the interface.ro INTEGER .1.3.6.1.4.1.5022.1.6.1.1.7 |
eqIntfBertMeasuredByteErrorCountThe number of byte errors measured on the interface.ro INTEGER .1.3.6.1.4.1.5022.1.6.1.1.8 |
eqIntfBertTestStartTimeThe time that the test was started.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.5022.1.6.1.1.9 |
eqIntfBertTestDurationThe time, in seconds, that the test has been running.ro INTEGER .1.3.6.1.4.1.5022.1.6.1.1.10 |
eqIntfBertActionA read of this object always returns the value other(1). Setting this object to insertBitError(2) inserts a bit error on the interface.rw Enumeration .1.3.6.1.4.1.5022.1.6.1.1.11 |