EQUIPE-SONET-MIB
AI MIB Summary
The EQUIPE-SONET-MIB module enables monitoring and management of SONET/SDH transport equipment manufactured by Equipe, specifically tracking optical interface status, signal integrity, and performance counters such as bit error rates and alarm conditions.
This is the Equipe SONET MIB module.
Main OID:
eqSonetMib.1.3.6.1.4.1.5022.3
20
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
equipe OBJECT IDENTIFIER .1.3.6.1.4.1.5022 |
eqSonetMibThis is the Equipe SONET MIB module. MODULE-IDENTITY .1.3.6.1.4.1.5022.3 |
eqSonetApsCfgTableThis table contains aps config info for a sonet port. SEQUENCE OF EqSonetApsCfgEntry .1.3.6.1.4.1.5022.3.1 |
eqSonetApsCfgEntryA sonet port aps config entry. EqSonetApsCfgEntry .1.3.6.1.4.1.5022.3.1.1 |
eqSonetApsCfgStatusThe current aps status for this sonet port.ro EqSonetApsCfgStatus .1.3.6.1.4.1.5022.3.1.1.1 |
eqSonetApsCfgActionThis object is used to perform an aps action on a sonet port. A read on this object always returns the value other(1). Setting this object to clear(2) causes the port to revert back to default aps configuration. Setting this object to lockoutProtecting(3) prevents any of the working channels from switching to the protecting line. Setting this object to forcedSwitchWorkingToProtecting(4) switches the working port to the protecting port. Setting this object to forcedSwitchProtectingToWorking(5) switches the protecting port to the working port. Setting this object to manualSwitchWorkingToProtecting(6) switches the working port to the protecting port. Setting this object to manualSwitchProtectingToWorking(7) switches the protecting port to the working port.rw EqSonetApsCfgAction .1.3.6.1.4.1.5022.3.1.1.2 |
eqSonetApsCfgLastActionThis object indicates the last aps action requested on this port.ro EqSonetApsCfgAction .1.3.6.1.4.1.5022.3.1.1.3 |
eqSonetApsCfgPortActiveThis object is used to determine if the sts paths configured on this port are currrently actually terminated on this port. This is used to determine if the port is in active or standby mode. A value of false(1) indicates that the sts paths are not terminated (standby). A value of true(2) indicates that the sts paths are terminated (active).ro Enumeration .1.3.6.1.4.1.5022.3.1.1.4 |
eqSonetPathTableThis table contains config info for a sonet port. SEQUENCE OF EqSonetPathEntry .1.3.6.1.4.1.5022.3.2 |
eqSonetPathEntryA sonet path config entry. EqSonetPathEntry .1.3.6.1.4.1.5022.3.2.1 |
eqSonetPathActualPortThe ifIndex of the sonet port over which this path is actually running. Note that this value could be different from the sonet port that the sts path was originally configured.ro INTEGER .1.3.6.1.4.1.5022.3.2.1.1 |
eqSonetStatsTableThis table contains stats for a sonet port. SEQUENCE OF EqSonetStatsEntry .1.3.6.1.4.1.5022.3.3 |
eqSonetStatsEntryA sonet port stats entry. EqSonetStatsEntry .1.3.6.1.4.1.5022.3.3.1 |
eqSonetStatsIfIndexThe ifIndex for the corresponding sonet port.ro INTEGER .1.3.6.1.4.1.5022.3.3.1.1 |
eqSonetStatsLineFailuresThe number of line failure events. A line failure is an AIS-L signal received from another NE, or received from the same NE when internally generating an AIS-L signal in the LTE.ro Counter32 .1.3.6.1.4.1.5022.3.3.1.2 |
eqSonetStatsLineApsCountThe number of times the service has switched from the working to the protect line.ro Counter32 .1.3.6.1.4.1.5022.3.3.1.3 |
eqSonetStatsLineApsSwitchDurationThe number of seconds the service has been carried on the protection line.ro Counter32 .1.3.6.1.4.1.5022.3.3.1.4 |
eqSonetStatsLineStsPtrAdjustmentsThe count of STS pointer adjustments created or absorbed by an NE due to differences in the frame rates of the incoming and outgoing sonet signal.ro Counter32 .1.3.6.1.4.1.5022.3.3.1.5 |
eqSonetStatsPathFailuresThe number of path failure events. A path failure is an AIS-P signal received from another NE, or received from the same NE when internally generating an AIS-P signal in the PTE. A path with support for ERDI-P will increment this counter when an UNEQ-P failure is declared.ro Counter32 .1.3.6.1.4.1.5022.3.3.1.6 |
eqSonetStatsTimeElapsedThe number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.ro Integer32 .1.3.6.1.4.1.5022.3.3.1.7 |