EQLIPSEC-MIB
Equallogic Inc. group information Copyright (c) 2002-2010 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc.
Main OID:
eqlIpsecModule.1.3.6.1.4.1.12740.22
87
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
87 total| Object Name |
|---|
eqlIpsecModuleEquallogic Inc. group information Copyright (c) 2002-2010 by Dell, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc. MODULE-IDENTITY .1.3.6.1.4.1.12740.22 |
eqlIpsecObjects OBJECT IDENTIFIER .1.3.6.1.4.1.12740.22.1 |
eqlIpsecTableEqualLogic-Persistent Storage IPSec global settings This table contains global IPSec settings. SEQUENCE OF EqlIpsecEntry .1.3.6.1.4.1.12740.22.1.1 |
eqlIpsecEntryAn entry (row) containing global IPSec settings. EqlIpsecEntry .1.3.6.1.4.1.12740.22.1.1.1 |
eqlIpsecInstanceIdThis index identifies the IPSec instance. This index should always be 1. Integer32 .1.3.6.1.4.1.12740.22.1.1.1.1 |
eqlIpsecEnableThis specifies if IPSec is enabled or disbaled. True for enabled and False for disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.12740.22.1.1.1.2 |
eqlIpsecRowStatusThis object indicates the conceptual status of this row. This object may not be set to active if the requirements of the spdIpHeadFiltType object are not met. In other words, if the associated value columns needed by a particular test have not been set, then attempting to change this row to an active state will result in an inconsistentValue error. See the spdIpHeadFiltType object description for further details.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.12740.22.1.1.1.3 |
eqlIpsecPolicyTableEqualLogic-Persistent Storage IPSec Policy Table. This table contains a list of filter definitions. SEQUENCE OF EqlIpsecPolicyEntry .1.3.6.1.4.1.12740.22.1.2 |
eqlIpsecPolicyEntryA definition of a particular filter. EqlIpsecPolicyEntry .1.3.6.1.4.1.12740.22.1.2.1 |
eqlIpsecPolicyInstanceIdThis index identifies the IPSec policy instance. Integer32 .1.3.6.1.4.1.12740.22.1.2.1.1 |
eqlIpsecPolicyFilterNameThe administrative name for this filter.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.2.1.2 |
eqlIpsecPolicyFilterIPVersionThe Internet Protocol version the addresses are to match against. The value of this property determines the size and format of the eqlIpsecPolicyFilterAddress and eqlIpsecPolicyFilterLocalAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.2.1.3 |
eqlIpsecPolicyFilterAddressThe starting address of a source address range that the packet must match against for this filter to be considered TRUE. This object is only used if sourceAddress is set in spdIpHeadFiltType.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.2.1.4 |
eqlIpsecPolicyFilterNetmaskLenThe ending address of a source address range to check a packet against, where the starting is specified by the spdIpHeadFiltSrcAddressBegin object. Set this column to the same value as the spdIpHeadFiltSrcAddressBegin column to get an exact single address match. This object is only used if sourceAddress is set in spdIpHeadFiltType.rw Integer32 .1.3.6.1.4.1.12740.22.1.2.1.5 |
eqlIpsecPolicyFilterLocalAddressThe Local IP Address on the array to bind a policy to. This option is only used when the Peer is of type manual. Can be either a IPv4 or IPV6 address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.2.1.6 |
eqlIpsecPolicyFilterPortThe low port of the port range a packet's source must match against. To match, the port number must be greater than or equal to this value. This object is only used if sourcePort is set in spdIpHeadFiltType. The value of 0 for this object is illegal.rw Integer32 .1.3.6.1.4.1.12740.22.1.2.1.7 |
eqlIpsecPolicyFilterLocalPortThe low port of the port range a packet's source must match against. To match, the port number must be greater than or equal to this value. This object is only used if sourcePort is set in spdIpHeadFiltType. The value of 0 for this object is illegal. This object specifies the local port to be used.rw Integer32 .1.3.6.1.4.1.12740.22.1.2.1.8 |
eqlIpsecPolicyFilterProtocolThe protocol number the incoming packet must match against for this filter to be evaluated as true. This object is only used if protocol is set in spdIpHeadFiltType.rw Integer32 .1.3.6.1.4.1.12740.22.1.2.1.9 |
eqlIpsecPolicyFilterPeerNameThis specifies the name of the peer this policy must be associated with.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.2.1.10 |
eqlIpsecPolicyFilterActionThe action to be taken on packets matching this rule.rw Enumeration .1.3.6.1.4.1.12740.22.1.2.1.11 |
eqlIpsecPolicyFilterRowStatusThis object indicates the conceptual status of this row. This object may not be set to active if the requirements of the spdIpHeadFiltType object are not met. In other words, if the associated value columns needed by a particular test have not been set, then attempting to change this row to an active state will result in an inconsistentValue error. See the spdIpHeadFiltType object description for further details.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.12740.22.1.2.1.12 |
eqlIpsecCertConfigTableEqualLogic-Dynamic IPSec certificate configuration Table. This table contains the list of certificates configured. SEQUENCE OF EqlIpsecCertConfigEntry .1.3.6.1.4.1.12740.22.1.3 |
eqlIpsecCertConfigEntryA definition of a particular certificate. EqlIpsecCertConfigEntry .1.3.6.1.4.1.12740.22.1.3.1 |
eqlIpsecCertInstanceIdThis index identifies the IPSec certificate instance. Integer32 .1.3.6.1.4.1.12740.22.1.3.1.1 |
eqlIpsecCertNameThe administrative name for this certificate.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.3.1.2 |
eqlIpsecCertFileNameThe certificate file name.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.3.1.3 |
eqlIpsecCertTypeThe certificate type. Local cert, Root CA cert or intermediate cert.rw Enumeration .1.3.6.1.4.1.12740.22.1.3.1.4 |
eqlIpsecPrivKeyFileNameThe private key file name.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.3.1.5 |
eqlIpsecCertPasswordThe password to use for decrypting certificate.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.3.1.6 |
eqlIpsecCertRowStatusThis object indicates the conceptual status of this row. This object may not be set to active if the requirements of the spdIpHeadFiltType object are not met. In other words, if the associated value columns needed by a particular test have not been set, then attempting to change this row to an active state will result in an inconsistentValue error. See the spdIpHeadFiltType object description for further details.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.12740.22.1.3.1.7 |
eqlIpsecPeerTableEqualLogic-Persistent Storage IPSec peer Table. This table contains the list of peers configured. SEQUENCE OF EqlIpsecPeerEntry .1.3.6.1.4.1.12740.22.1.4 |
eqlIpsecPeerEntryA definition of a particular certificate. EqlIpsecPeerEntry .1.3.6.1.4.1.12740.22.1.4.1 |
eqlIpsecPeerInstanceIdThis index identifies the IPSec policy instance. Integer32 .1.3.6.1.4.1.12740.22.1.4.1.1 |
eqlIpsecPeerNameThe administrative name for this peer.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.4.1.2 |
eqlIpsecPeerAuthTypeThe authentication method used with this peer. Pre-shared keys, certificates and manual keys are the options.rw Enumeration .1.3.6.1.4.1.12740.22.1.4.1.3 |
eqlIpsecPeerPreSharedKeyThe pre-shared key to be used during authentication. It is mandatory that this only contain printable ASCII ASCII characters, meaning each byte must be in the range of 33 to 126.rw DisplayString .1.3.6.1.4.1.12740.22.1.4.1.4 |
eqlIpsecPeerCertIdTypeThe identifier type to be used in ID payload. Only applicable if the auth type is certificates.rw Enumeration .1.3.6.1.4.1.12740.22.1.4.1.5 |
eqlIpsecPeerCertIdValueThe pre-shared key to be used during authentication. Only applicable if the auth type is certificates.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.4.1.6 |
eqlIpsecPeerNullEncThis specifies if null encryption is to be used. Only applicable if the auth type is certificates or pre-shared keys.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.12740.22.1.4.1.7 |
eqlIpsecPeerTunnelModeThis specifies if tunnel mode is to be used with this peer.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.12740.22.1.4.1.8 |
eqlIpsecPeerTunnelAddressIPVersionThe Internet Protocol version the addresses are to match against. The value of this property determines the size and format of the spdIpHeadFiltSrcAddressBegin, spdIpHeadFiltSrcAddressEnd, spdIpHeadFiltDstAddressBegin, and spdIpHeadFiltDstAddressEnd objects. Values of unknown, ipv4z, ipv6z and dns are not legal values for this object.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.4.1.9 |
eqlIpsecPeerTunnelAddressThe address of the tunnel remote end This object is only used if tunnelMode is set to True.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.4.1.10 |
eqlIpsecPeerIkeV2This specifies the IKE version to be used with this peer. If the peer talks the other version, the IPSec session will not be established.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.12740.22.1.4.1.11 |
eqlIpsecPeerManualKeyEncAlgThe encryption algorithm to be used. Only applicable if the auth type is manual keys.rw Enumeration .1.3.6.1.4.1.12740.22.1.4.1.12 |
eqlIpsecPeerManualKeyEncKeyOutThe encryption key to be used in the outbound direction. Specified as a hex string. Only applicable if the auth type is manual keys.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.4.1.13 |
eqlIpsecPeerManualKeyEncKeyInThe encryption key to be used in the inbound direction. Specified as a hex string. Only applicable if the auth type is manual keys.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.4.1.14 |
eqlIpsecPeerManualKeyAuthAlgThe authentication algorithm to be used. Only applicable if the auth type is manual keys.rw Enumeration .1.3.6.1.4.1.12740.22.1.4.1.15 |
eqlIpsecPeerManualKeyAuthKeyOutThe authentication key to be used in the outbound direction. Specified as a string. Only applicable if the auth type is manual keys.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.4.1.16 |
eqlIpsecPeerManualKeyAuthKeyInThe authentication key to be used in the inbound direction. Specified as a string. Only applicable if the auth type is manual keys.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.4.1.17 |
eqlIpsecPeerManualKeySpiOutThe SPI to be used in the outbound direction. Only applicable if the auth type is manual keys.rw Integer32 .1.3.6.1.4.1.12740.22.1.4.1.18 |
eqlIpsecPeerManualKeySpiInThe SPI to be used in the inbound direction. Only applicable if the auth type is manual keys.rw Integer32 .1.3.6.1.4.1.12740.22.1.4.1.19 |
eqlIpsecPeerRowStatusThis object indicates the conceptual status of this row. This object may not be set to active if the requirements of the spdIpHeadFiltType object are not met. In other words, if the associated value columns needed by a particular test have not been set, then attempting to change this row to an active state will result in an inconsistentValue error. See the spdIpHeadFiltType object description for further details.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.12740.22.1.4.1.20 |
eqlIpsecCertDisplayTableEqualLogic-Dynamic IPSec certificate display Table. This table is used to display certificate details. SEQUENCE OF EqlIpsecCertDisplayEntry .1.3.6.1.4.1.12740.22.1.5 |
eqlIpsecCertDisplayEntryContents of a particular certificate instance for display. EqlIpsecCertDisplayEntry .1.3.6.1.4.1.12740.22.1.5.1 |
eqlIpsecCertDisplayNameThe administrative name for this certificate.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.5.1.1 |
eqlIpsecCertDisplayIssuedToDNameDisplay string for the field issued to distinguished name.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.5.1.2 |
eqlIpsecCertDisplaySerialNumberDisplay string for the field serial number.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.5.1.3 |
eqlIpsecCertDisplayIssuedByDNameDisplay string for the field issued by distinguished name.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.5.1.4 |
eqlIpsecCertDisplayIssuedOnDisplay string for the field issued on.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.5.1.5 |
eqlIpsecCertDisplayExpiresOnDisplay string for the field expires on.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.5.1.6 |
eqlIpsecCertDisplaySha1FingerprintDisplay string for the field SHA1 finger print.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.5.1.7 |
eqlIpsecCertDisplayMd5FingerprintDisplay string for the field MD5 finger print.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.5.1.8 |
eqlIpsecCertDisplayLocalBoolean that indicates if this is a localm certificate or not.rw Enumeration .1.3.6.1.4.1.12740.22.1.5.1.9 |
eqlIpsecCertDisplayFormatThe certificate format. x.509 or pkcs12.rw Enumeration .1.3.6.1.4.1.12740.22.1.5.1.10 |
eqlIpsecCertDisplaySubAltNameDisplay string for the field MD5 finger print.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.5.1.11 |
eqlIpsecSecAssocTableEqualLogic-Dynamic IPSec security association Table. This table is used to display the security association details. SEQUENCE OF EqlIpsecSecAssocEntry .1.3.6.1.4.1.12740.22.1.6 |
eqlIpsecSecAssocEntryContents of a particular SA instance for display. EqlIpsecSecAssocEntry .1.3.6.1.4.1.12740.22.1.6.1 |
eqlIpsecSecAssocInstanceIdHighThis index carries the high-order 32-bit of the instance ID that identifies the IPSec security association. Unsigned32 .1.3.6.1.4.1.12740.22.1.6.1.1 |
eqlIpsecSecAssocInstanceIdLowThis index carries the low-order 32-bit of the instance ID that identifies the IPSec security association. Unsigned32 .1.3.6.1.4.1.12740.22.1.6.1.2 |
eqlIpsecSecAssocSrcAddressIPVersionThe IP version of the source endpoint.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.6.1.3 |
eqlIpsecSecAssocSrcAddressThe IP address of the source endpoint.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.6.1.4 |
eqlIpsecSecAssocDstAddressIPVersionThe IP version of the destination endpoint.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.6.1.5 |
eqlIpsecSecAssocDstAddressThe IP address of the destination endpoint.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.6.1.6 |
eqlIpsecSecAssocEncAlgThe encryption algorithm used.rw Enumeration .1.3.6.1.4.1.12740.22.1.6.1.7 |
eqlIpsecSecAssocAuthAlgThe authentication algorithm used.rw Enumeration .1.3.6.1.4.1.12740.22.1.6.1.8 |
eqlIpsecSecAssocSpiSPI used in the security association.rw Integer32 .1.3.6.1.4.1.12740.22.1.6.1.9 |
eqlIpsecSecAssocEncKeyDisplay string for the encryption key used in the SA.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.6.1.10 |
eqlIpsecSecAssocAuthKeyDisplay string for the authentication key used in the SA.rw SnmpAdminString .1.3.6.1.4.1.12740.22.1.6.1.11 |
eqlIpsecSecAssocManualTrue means SA is from a manual key configured.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.12740.22.1.6.1.12 |
eqlIpsecStaleSecAssocDeleteTableEqualLogic-Dynamic IPSec stale security association delete Table. This table is used to indicate the destination address and type of all security associations to delete. SEQUENCE OF EqlIpsecStaleSecAssocDeleteEntry .1.3.6.1.4.1.12740.22.1.7 |
eqlIpsecStaleSecAssocDeleteEntryContents of a particular SA instance for delete. EqlIpsecStaleSecAssocDeleteEntry .1.3.6.1.4.1.12740.22.1.7.1 |
eqlIpsecStaleSecAssocDeleteInstanceIdThis index identifies the IPSec stale SA delete instance. Integer32 .1.3.6.1.4.1.12740.22.1.7.1.1 |
eqlIpsecStaleSecAssocDeleteDestAddressIPVersionThe IP version of the destination address of the security associations to delete.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.7.1.2 |
eqlIpsecStaleSecAssocDeleteDestAddressThe destination address of the security associations to delete.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.12740.22.1.7.1.3 |
eqlIpsecStaleSecAssocDeleteRowStatusThis object indicates the conceptual status of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.12740.22.1.7.1.4 |
eqlIpsecNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.12740.22.2 |
eqlIpsecConformance OBJECT IDENTIFIER .1.3.6.1.4.1.12740.22.3 |