ENTERASYS-VIRTUAL-SWITCH-BONDING-MIB
AI MIB Summary
The ENTERASYS-VIRTUAL-SWITCH-BONDING-MIB provides SNMP management interfaces for Enterasys chassis and stand-alone switches to monitor and configure Virtual Switch Bonding (VSB) stack states, member link aggregations, and Layer 2 redundancy parameters. It enables administrators to track the operational status of virtualized switch clusters, ensuring transparent physical redundancy across aggregated devices and uplinks.
This MIB module defines a portion of the SNMP MIB under Enterasys Networks' enterprise OID pertaining to Virtual Switch Bonding (VSB). VSB is meant to accomplish two similar goals: to allow the aggregation of two or more chassis-type products into a single, virtual network device; and similarly to support building a stack of two or more stand-alone-type products. The key operational benefit behind this (and similar) technologies is the ability to provide transparent Layer 2 physical redundancy (redundancy of both links and network devices) all the way to the edge of the network.
Main OID:
etsysVirtualSwitchBondingMIB.1.3.6.1.4.1.5624.1.2.83
38
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
etsysVirtualSwitchBondingMIBThis MIB module defines a portion of the SNMP MIB under Enterasys Networks' enterprise OID pertaining to Virtual Switch Bonding (VSB). VSB is meant to accomplish two similar goals: to allow the aggregation of two or more chassis-type products into a single, virtual network device; and similarly to support building a stack of two or more stand-alone-type products. The key operational benefit behind this (and similar) technologies is the ability to provide transparent Layer 2 physical redundancy (redundancy of both links and network devices) all the way to the edge of the network. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.83 |
etsysVsbObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.83.1 |
etsysVsbSystem OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.83.1.1 |
etsysVsbSystemEnableThe administrative enable/disable state for VSB. Enabling this object turns on VSB in a system.rw Enumeration .1.3.6.1.4.1.5624.1.2.83.1.1.1 |
etsysVsbSystemMaxChassisThe maximum number of physical chassis supported in the virtual switch.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.83.1.1.2 |
etsysVsbSystemMaxSlotNumberThe maximum slot number supported in the virtual switch.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.83.1.1.3 |
etsysVsbAdministrativeMacAddressThe administratively configured mac address of the virtual switch.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.83.1.1.4 |
etsysVsbOperationalMacAddressThe operationally assigned mac address of the virtual switch. If no mac address is administratively configured, the VSB system will be responsible for selecting and assigning the virtual switch mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.83.1.1.5 |
etsysVsbSystemLinkFailureResponseThe administrative state of the Link Failure Response for the VSB. Enabling this object turns on the default Link Failure Response algorithms.rw Enumeration .1.3.6.1.4.1.5624.1.2.83.1.1.6 |
etsysVsbChassis OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.83.1.2 |
etsysVsbChassisTableThis table contains the configuration information for the physical chassis of a virtual switch. Adding a chassis to a virtual switch is initiated by assigning a virtual switch system ID to an entry. The entry index is also the chassis ID in the virtual switch. A virtual switch ID can only be administratively assigned to one entry in the table because a chassis cannot simultaneously be a member of multiple virtual switches, or have multiple chassis IDs in the same virtual switch. A value of 'inconsistentValue' will be returned if attempts are made to assign the same virtual switch ID to more than one entry. Chassis ID is also used to indicate relative position in the virtual switch, where chassis 1 is assigned slot 1 through n, chassis 2 is assigned slots n+1 through n+m, where n and m are the max number of slots for chassis 1 and 2 respectively. SEQUENCE OF EtsysVsbChassisEntry .1.3.6.1.4.1.5624.1.2.83.1.2.1 |
etsysVsbChassisEntryThe configuration for a physical chassis in the virtual switch. EtsysVsbChassisEntry .1.3.6.1.4.1.5624.1.2.83.1.2.1.1 |
etsysVsbChassisIndexThe identifier of this chassis in the virtual switch. This value is in the range between 1..etsysVsbSystemMaxChassis. Unsigned32 .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.1 |
etsysVsbChassisSystemIdThe virtual switch ID for this switch.rw VsbId .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.2 |
etsysVsbChassisSerialNumThe serial number string for the physical chassis or standalone device in a bonded setup.ro SnmpAdminString .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.3 |
etsysVsbChassisFirstSlotNumberThe administratively assigned first slot position in the virtual switch. Manually initializing chassis position will override automatic positioning by the VSB system. In the event another chassis already occupies the position, this chassis will not be added to the bond. This value is in the range of 0|1..etsysVsbSystemMaxSlotNumber.rw Unsigned32 .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.4 |
etsysVsbChassisLocalSlotListThe set of slots local to this chassis that are present.ro VsbSlotList .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.5 |
etsysVsbChassisSystemSlotListThe set of local and bonded slots that are present.ro VsbSlotList .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.6 |
etsysVsbChassisStatusThe bonding status of this chassis.ro VsbChassisStatus .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.7 |
etsysVsbChassisLastBondTimeLast sysUpTime at which this chassis was connected to all other members of the virtual switch.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.8 |
etsysVsbChassisSharedSecretThe secret shared between the chassis in a virtual switch used to authenticate the bonding protocol data being transmitted between chassis. On a read operation this object MUST return a zero length string. Writing this object with a zero length string clears the secret.rw SnmpAdminString .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.9 |
etsysVsbChassisSecretEnteredtrue(1) - Indicates that etsysVsbChassisSharedSecret was last set with some value other than the empty string. false(2) - Indicates that etsysVsbChassisSharedSecret has never been set, or was last set to the empty string.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.10 |
etsysVsbChassisLfrOperPriorityOperational priority assigned to the associated chassis identifier. When responding to a VSB link failure, the currently operational chassis with the highest priority is allowed to remain operational. This value is in the range between 1..255.rw Unsigned32 .1.3.6.1.4.1.5624.1.2.83.1.2.1.1.11 |
etsysVsbPort OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.83.1.3 |
etsysVsbPortTableA table of configuration and status objects for each port that supports Bonding Port mode. SEQUENCE OF EtsysVsbPortEntry .1.3.6.1.4.1.5624.1.2.83.1.3.1 |
etsysVsbPortEntryAn entry containing per port bonding properties. EtsysVsbPortEntry .1.3.6.1.4.1.5624.1.2.83.1.3.1.1 |
etsysVsbPortAdminStatusThe desired state of the bonding port for this ifIndex.rw Enumeration .1.3.6.1.4.1.5624.1.2.83.1.3.1.1.1 |
etsysVsbPortOperStatusThe operational status of the bonding port for this ifIndex. If the state is NOT up, then it is down for the stated reason, if known. If etsysVsbPortAdminStatus is down(2), then etsysVsbPortOperStatus should be down(2). If etsysVsbPortAdminStatus is changed to up(1) the etsysVsbPortOperStatus should change to up(1) if the interface is ready to transmit and receive bonding traffic. It should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state.ro Enumeration .1.3.6.1.4.1.5624.1.2.83.1.3.1.1.2 |
etsysVsbConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.83.2 |
etsysVsbGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.83.2.1 |
etsysVsbSystemGroupThis section is for system configuration of the VSB system.deprecated Unknown .1.3.6.1.4.1.5624.1.2.83.2.1.1 |
etsysVsbChassisGroupThis section is for chassis based configuration of the VSB system.deprecated Unknown .1.3.6.1.4.1.5624.1.2.83.2.1.2 |
etsysVsbPortGroupThis section is for port configuration of the VSB system. Unknown .1.3.6.1.4.1.5624.1.2.83.2.1.3 |
etsysVsbSystemGroup2This section is for system configuration of the VSB system. Unknown .1.3.6.1.4.1.5624.1.2.83.2.1.4 |
etsysVsbChassisGroup2This section is for chassis based configuration of the VSB system. Unknown .1.3.6.1.4.1.5624.1.2.83.2.1.5 |
etsysVsbCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.83.2.2 |
etsysVsbComplianceThe compliance statement for devices that support VSB.deprecated Unknown .1.3.6.1.4.1.5624.1.2.83.2.2.1 |
etsysVsbCompliance2The compliance statement for devices that support VSB. Unknown .1.3.6.1.4.1.5624.1.2.83.2.2.2 |