ENTERASYS-SNMP-PERSISTENCE-MIB
The ENTERASYS-SNMP-PERSISTENCE-MIB enables network management systems to write and commit volatile SNMP configuration parameters to non-volatile storage on Enterasys network devices, ensuring configuration retention across system reboots or power failures.
Imported Objects
Objects
13 total| Object Name |
|---|
etsysSnmpPersistenceMIBThis MIB modules provides objects that allow management applications to commit persistent SNMP configuration information to persistent storage. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.24 |
etsysSnmpPersistenceObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.24.1 |
etsysSnmpPersistenceModeSetting this object to snmpNormalSave(1) will cause this device to exhibit what could be considered normal SNMP behavior, that is each SNMP set of a persistent object will be saved to persistent storage as part of the set operation. Setting this object to pushButtonSave(2) will cause SNMP sets of persistent objects to be buffered in volatile memory until the configuration is explicitly saved to persistent memory, either through the CLI or by setting the etsysSnmpPersistenceWrite object to save(2). Setting this object to timeDelayedSave(3) will cause SNMP sets of persistent objects to be buffered in volatile memory until certain implementation dependent time conditions are met. Once these conditions are met the configuration is saved to persistent memory. Setting this object to a mode that is not supported on that particular implementation leads to an inconsistent value error. On an SNMP get operation this object will return the current persistent storage mode of operation.rw Enumeration .1.3.6.1.4.1.5624.1.2.24.1.1 |
etsysSnmpPersistenceSaveSetting this object to save(2) will cause the current configuration that is stored in volatile memory to be written to persistent memory and become the start-up configuration. This will also cause any configuration information that is part of another management interface's active configuration to become part of the start-up configuration. Any configuration changes made through SNMP will become part of the start-up configuration if and when another management interface saves the current configuration to persistent storage. Setting this object to save(2) while the value of the etsysSnmpPersistenceMode object is NOT pushButtonSave(2) MAY lead to an inconsistent value error. Setting this object to save(2) while the value of the etsysSnmpPersistenceStatus object is savingChanges(3) leads to an inconsistent value error. Setting this object to nop(1) always succeeds and has no effect. On an SNMP get operation this object will return nop(1). Management applications are advised to make use of the snmpSetSerialNo object defined in the SNMPv2-MIB to coordinate their use of this object.rw Enumeration .1.3.6.1.4.1.5624.1.2.24.1.2 |
etsysSnmpPersistenceStatusThis object reports the current status of the persistent storage system when the etsysSnmpPersistenceMode object is NOT set to snmpNormalSave(1). other - The value returned after initialization and before any configuration changes are made when the etsysSnmpPersistenceMode object is NOT set to snmpNormalSave(1). The value returned in all cases when the etsysSnmpPersistenceMode object is set to snmpNormalSave(1). unsavedChanges - The value returned when there are existing configuration changes that have not been saved to persistent storage. savingChanges - The value returned during the process of writing the current configuration to persistent storage. saveSucceeded - The value returned after the process of writing the current configuration to persistent storage has succeeded. saveFailed - The value returned after the process of writing the current configuration to persistent storage has failed. This status will reflect operations initiated through SNMP as well as all other supported management interfaces.ro Enumeration .1.3.6.1.4.1.5624.1.2.24.1.3 |
etsysSnmpPersistenceStatusTimeThe value of sysUpTime when etsysSnmpPersistenceStatus was last updated. If etsysSnmpPersistenceStatus has not been updated since initialization the value zero is returned.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.5624.1.2.24.1.4 |
etsysSnmpPersistenceErrorThis object contains a descriptive error message if the last attempt to write to persistent storage has failed.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.24.1.5 |
etsysSnmpPersistenceErrorTimeThe data and time when the etsysSnmpPersistenceError was last updated. If etsysSnmpPersistenceError has not been updated since initialization the value '0000000000000000'H is returned.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.24.1.6 |
etsysSnmpPersistenceConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.24.2 |
etsysSnmpPersistenceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.24.2.1 |
etsysSnmpPersistenceGroupA collection of objects providing support for delayed persistence of otherwise persistent SNMP objects. Unknown .1.3.6.1.4.1.5624.1.2.24.2.1.1 |
etsysSnmpPersistenceCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.24.2.2 |
etsysSnmpPersistenceComplianceThe compliance statement for devices that support delayed persistence of otherwise persistent SNMP objects. Unknown .1.3.6.1.4.1.5624.1.2.24.2.2.1 |
More MIBs from Enterasys
Browse all EnterasysMIBs →The ENTERASYS-OIDS-MIB module provides the foundational Object Identifier (OID) definitions required for SNMP-based monitoring of Enterasys Networks hardware system attributes, including device identity, software versions, and hardware inventory. It serves as the structural registry enabling network management systems to map and retrieve specific system-level metrics from Enterasys switches, routers, and wireless controllers.
The ENTERASYS-CLASS-OF-SERVICE-MIB manages transmission and reception attributes for Quality of Service (QoS) classification on Extreme Networks (formerly Enterasys) edge and access devices. It enables SNMP-based configuration and monitoring of traffic prioritization policies, including queue mapping, scheduling, and bandwidth allocation parameters.
The ENTERASYS-FIREWALL-MIB enables SNMP-based configuration, policy management, and real-time monitoring of Enterasys firewall appliances, specifically exposing metrics for access control rules, session states, and interface traffic statistics.
The ENTERASYS-LSNAT-MIB provides management access to Layer 4 Session NAT (LSNAT) entities on Enterasys Networks hardware, enabling the monitoring of active session states, translation table entries, and packet/byte counters for protocol-specific NAT mappings.
The ENTERASYS-POLICY-PROFILE-MIB enables SNMP-based monitoring and configuration of per-user policy profiles on Enterasys network edge and access devices. It facilitates the retrieval and management of specific user authentication and authorization parameters, including assigned access control lists and traffic shaping rules, to enforce granular network access policies.
The ENTERASYS-TWCB-MIB-2 module enables monitoring and management of Time-Weighted Cost-Based (TWCB) routing metrics and interface attributes on Enterasys Networks switches. It provides specific counters and gauges for tracking path costs and link states to support advanced traffic engineering and load balancing decisions.