ENTERASYS-IMAGE-VALIDATION-MIB
AI MIB Summary
The ENTERASYS-IMAGE-VALIDATION-MIB enables SNMP monitoring of firmware image integrity and recovery states on Enterasys Networks hardware, specifically tracking validation status flags and recovery trigger conditions to ensure system boot reliability.
This MIB module defines a portion of the SNMP MIB under Enterasys Networks' enterprise OID pertaining to new image validation and recovery.
Main OID:
etsysImageValidationMIB.1.3.6.1.4.1.5624.1.2.47
15
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
etsysImageValidationMIBThis MIB module defines a portion of the SNMP MIB under Enterasys Networks' enterprise OID pertaining to new image validation and recovery. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.47 |
etsysImageValidationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.47.1 |
etsysImageValidationConfig OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.47.1.1 |
etsysImageValidationEnableThe enabled/disabled status of the New Image Validation feature.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.47.1.1.1 |
etsysImageValidationPeriodThe maximum number of seconds to monitor the new image after it has booted. If any of the selected validation operations are not successfully completed within this interval, a reset will be issued to load the prior operational image.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.5624.1.2.47.1.1.2 |
etsysImageValidationOperationsThe operations that will be used to validate the new image during the etsysImageValidationPeriod. etsysImageValidationConfig - The successful loading of the start-up configuration. etsysImageValidationIcmp - The successful reception of an ICMP echo reply from the host specified in etsysImageValidationIcmpAddress. etsysImageValidationSnmp - The successful reception of an SNMP request from the host specified in etsysImageValidationSnmpAddress. If a host is not specified, an SNMP request from any host will be considered a success. If all of the selected validation operations are not successfully completed within the etsysImageValidationPeriod, a reset will be issued to load the prior operational image.rw Bits .1.3.6.1.4.1.5624.1.2.47.1.1.3 |
etsysImageValidationIcmpAddressTypeThe address type of the etsysImageValidationIcmpAddress object. These objects are used when the ICMP echo reply validation operation has been selected.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.47.1.1.4 |
etsysImageValidationIcmpAddressThe address of the host that should respond to the ICMP echo request. If an ICMP echo reply has NOT been received from this host by the end of the etsysImageValidationPeriod, a reset will be initiated to load the prior operational image.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.47.1.1.5 |
etsysImageValidationSnmpAddressTypeThe address type of the etsysImageValidationSnmpAddress object. These objects are used when the SNMP request validation operation has been selected.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.47.1.1.6 |
etsysImageValidationSnmpAddressThe address of the host that we should receive an SNMP request from. If this object contains its default value then an SNMP request from any station will be considered a success. If an SNMP request has NOT been received from this host by the end of the etsysImageValidationPeriod, a reset will be initiated to load the prior operational image.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.47.1.1.7 |
etsysImageValidationConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.47.2 |
etsysImageValidationGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.47.2.1 |
etsysImageValidationConfigGroupObjects that provide a means to validate a new image. Unknown .1.3.6.1.4.1.5624.1.2.47.2.1.1 |
etsysImageValidationCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.47.2.2 |
etsysImageValidationComplianceThe compliance statement for entities which implement the Enterasys Image Validation MIB. Unknown .1.3.6.1.4.1.5624.1.2.47.2.2.1 |