ENTERASYS-IF-MIB-EXT-MIB
The ENTERASYS-IF-MIB-EXT-MIB extends standard IF-MIB functionality to monitor and manage proprietary interface attributes, such as specific port states, error counters, and link status details, on Enterasys Networks switching and routing hardware via SNMP.
Imported Objects
Objects
14 total| Object Name |
|---|
etsysIfMibExtMIBThis MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID that provide extensions to the industry standard IF-MIB. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.57 |
etsysIfMibExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.57.1 |
etsysIfMibExtSystem OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.57.1.1 |
etsysIfOperStateLinkChangeThis object controls the system wide ability to manipulate the physical link state of an interface when the interface's ifOperStatus transitions into or out of the down(2) state. A value of enabled(1) will cause an interface to drop physical link when its ifOperStatus transitions to down(2). If the interface would transition out of the down(2) state, assuming it did have link, then physical link will be restored to the interface. A value of disabled(2) will cause an interface to not alter its physical link regardless of the value of ifOperStatus. This object only affects those interfaces which have a concept of physical link.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.57.1.1.1 |
etsysIfMibExtInterface OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.57.1.2 |
etsysInterfaceExtTableA table of per interface information that extends the base ifTable defined in RFC2863. SEQUENCE OF EtsysInterfaceExtEntry .1.3.6.1.4.1.5624.1.2.57.1.2.1 |
etsysInterfaceExtEntryAn entry containing per interface information. EtsysInterfaceExtEntry .1.3.6.1.4.1.5624.1.2.57.1.2.1.1 |
etsysIfOperStatusCauseThis object indicates the various features that could cause the ifOperStatus of an interface to not be up(1).ro EtsysIfOperStatusCauses .1.3.6.1.4.1.5624.1.2.57.1.2.1.1.1 |
etsysIfMibExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.57.2 |
etsysIfMibExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.57.2.1 |
etsysIfMibExtOperLinkGroupThe group that controls physical link manipulation as a result of ifOperStatus changes. Unknown .1.3.6.1.4.1.5624.1.2.57.2.1.1 |
etsysIfMibExtOperStatusGroupThe group that provides the cause of the current ifOperStatus value for a given interface. Unknown .1.3.6.1.4.1.5624.1.2.57.2.1.2 |
etsysIfMibExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.57.2.2 |
etsysIfMibExtComplianceThe compliance statement for devices that support IF-MIB extensions. Unknown .1.3.6.1.4.1.5624.1.2.57.2.2.1 |
More MIBs from Enterasys
Browse all EnterasysMIBs →The ENTERASYS-OIDS-MIB module provides the foundational Object Identifier (OID) definitions required for SNMP-based monitoring of Enterasys Networks hardware system attributes, including device identity, software versions, and hardware inventory. It serves as the structural registry enabling network management systems to map and retrieve specific system-level metrics from Enterasys switches, routers, and wireless controllers.
The ENTERASYS-CLASS-OF-SERVICE-MIB manages transmission and reception attributes for Quality of Service (QoS) classification on Extreme Networks (formerly Enterasys) edge and access devices. It enables SNMP-based configuration and monitoring of traffic prioritization policies, including queue mapping, scheduling, and bandwidth allocation parameters.
The ENTERASYS-FIREWALL-MIB enables SNMP-based configuration, policy management, and real-time monitoring of Enterasys firewall appliances, specifically exposing metrics for access control rules, session states, and interface traffic statistics.
The ENTERASYS-LSNAT-MIB provides management access to Layer 4 Session NAT (LSNAT) entities on Enterasys Networks hardware, enabling the monitoring of active session states, translation table entries, and packet/byte counters for protocol-specific NAT mappings.
The ENTERASYS-POLICY-PROFILE-MIB enables SNMP-based monitoring and configuration of per-user policy profiles on Enterasys network edge and access devices. It facilitates the retrieval and management of specific user authentication and authorization parameters, including assigned access control lists and traffic shaping rules, to enforce granular network access policies.
The ENTERASYS-TWCB-MIB-2 module enables monitoring and management of Time-Weighted Cost-Based (TWCB) routing metrics and interface attributes on Enterasys Networks switches. It provides specific counters and gauges for tracking path costs and link states to support advanced traffic engineering and load balancing decisions.