ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB
The ENTERASYS-IEEE8021-Q-BRIDGE-MIB-EXT-MIB provides proprietary SNMP extensions for Enterasys switches to monitor and manage IEEE 802.1Q VLAN bridge parameters, including VLAN membership, port states, and MAC address table entries beyond standard MIB definitions.
Imported Objects
Objects
21 total| Object Name |
|---|
etsysIeee8021QBridgeMibExtMIBThis MIB module defines a portion of the SNMP MIB under
the Enterasys Networks enterprise OID pertaining to
proprietary extensions to the IEEE8021-Q-BRIDGE-MIB. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.88 |
etsysIeee8021QBridgeMibExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.88.1 |
etsysIeee8021QBridgeMibExtMvrpBranch OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.88.1.1 |
etsysIeee8021QVlanMvrpRestrictedTableA table containing per VLAN control and status
information for MVRP VLAN configuration in the device. SEQUENCE OF EtsysIeee8021QVlanMvrpRestrictedEntry .1.3.6.1.4.1.5624.1.2.88.1.1.1 |
etsysIeee8021QVlanMvrpRestrictedEntryInformation controlling proprietary VLAN configuration
for MVRP on a device. EtsysIeee8021QVlanMvrpRestrictedEntry .1.3.6.1.4.1.5624.1.2.88.1.1.1.1 |
etsysIeee8021QVlanMvrpRestrictedComponentIdThe PBB component identifier to which this entry's
restricted MVRP VLAN attribute status applies. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.6.1.4.1.5624.1.2.88.1.1.1.1.1 |
etsysIeee8021QVlanMvrpRestrictedIndexThe VLAN to which this entry's restricted MVRP VLAN
attribute status applies. IEEE8021VlanIndex (IEEE8021-TC-MIB) .1.3.6.1.4.1.5624.1.2.88.1.1.1.1.2 |
etsysIeee8021QVlanMvrpRestrictedStatusThe state of restricted MVRP operation for this VLAN. The
value enabled(1) indicates that restricted MVRP operation is
enabled for this VLAN. This object affects MVRP Applicant
and Registrar state machines for this VLAN on all ports.
If restricted MVRP is enabled for a VLAN the following rules
are applied:
1. If MVRP is globally enabled and
2. If MVRP is enabled at the port level, then
3. Any ports that were members of the dot1qVlanCurrentEgressPorts
table due to MVRP will signal to remove this registration and no
further registration requests received in MVRP PDUs for this
VLAN will be processed and
4. Any ports that were propagating registration information for
this VLAN will cease propagation and all further MVRP PDUs
transmitted after the initial withdrawal attempt will not
include event notifications for this VLAN.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.88.1.1.1.1.3 |
etsysIeee8021QBridgeMibExtPortVlanBranch OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.88.1.2 |
etsysIeee8021QBridgeMibExtPortVlanTableA table of bridge port MRP timer control information. SEQUENCE OF EtsysIeee8021QBridgeMibExtPortVlanEntry .1.3.6.1.4.1.5624.1.2.88.1.2.1 |
etsysIeee8021QBridgeMibExtPortVlanEntryA conceptual row in etsysIeee8021QBridgeMibExtPortVlanTable. EtsysIeee8021QBridgeMibExtPortVlanEntry .1.3.6.1.4.1.5624.1.2.88.1.2.1.1 |
etsysIeee8021QBridgePortMvrpRxVidTranslationErrorsThe total number of receive errors for MVRP due to an
incompatible VID translation configuration on a port.
This error occurs when an MVRPDU is received on a
port which has a VID translation table configured and
the MVRPDU contains messages for multiple local VIDs
that map to the same relay VID. The MVRPDU is
discarded when this error is detected.ro Counter64 UNITS "MVRP receive VID translation errors" .1.3.6.1.4.1.5624.1.2.88.1.2.1.1.1 |
etsysIeee8021QBridgePortMvrpTxVidTranslationErrorsThe total number of transmit errors for MVRP due to an
incompatible VID translation configuration on a port.
This error occurs when an MVRPDU is being encoded for
transmit on a port which has a VID translation table
configured and the MVRPDU has messages for multiple
local VIDs that map to the same relay VID. The MVRPDU
is discarded when this error occurs.ro Counter64 UNITS "MVRP transmit VID translation errors" .1.3.6.1.4.1.5624.1.2.88.1.2.1.1.2 |
etsysIeee8021QBridgeMibExtFdbBranch OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.88.1.3 |
etsysIeee8021QBridgeFdb OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.88.1.3.1 |
etsysIeee8021QBridgeFdbMaxNumEntriesCapabilitiesIndicates the values of maximum number of entries supported
by the hardware. The possible values are as follows:
fdbMaxNumEntries4K(0) - The maximum number of entries in
the filter database is 4K (4096).
fdbMaxNumEntries8K(1) - The maximum number of entries in
the filter database is 8K (8192).
fdbMaxNumEntries16K(2) - The maximum number of entries in
the filter database is 16K (16384).
fdbMaxNumEntries32K(3) - The maximum number of entries in
the filter database is 32K (32768).
fdbMaxNumEntries64K(4) - The maximum number of entries in
the filter database is 64K (65536).
fdbMaxNumEntries128K(5) - The maximum number of entries in
the filter database is 128K (131072).ro Bits .1.3.6.1.4.1.5624.1.2.88.1.3.1.1 |
etsysIeee8021QBridgeFdbMaxNumEntriesIndicates the configured maximum number of entries in the
filter database.rw EtsysIeee8021QBridgeFdbEntries .1.3.6.1.4.1.5624.1.2.88.1.3.1.2 |
etsysIeee8021QBridgeFdbOperMaxNumEntriesIndicates the operational maximum number of entries in the
filter database.ro EtsysIeee8021QBridgeFdbEntries .1.3.6.1.4.1.5624.1.2.88.1.3.1.3 |
etsysIeee8021QBridgeMibExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.88.2 |
etsysIeee8021QBridgeMibExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.88.2.1 |
etsysIeee8021QBridgeMibExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.88.2.2 |
More MIBs from Enterasys
Browse all EnterasysMIBs →The ENTERASYS-OIDS-MIB module provides the foundational Object Identifier (OID) definitions required for SNMP-based monitoring of Enterasys Networks hardware system attributes, including device identity, software versions, and hardware inventory. It serves as the structural registry enabling network management systems to map and retrieve specific system-level metrics from Enterasys switches, routers, and wireless controllers.
The ENTERASYS-CLASS-OF-SERVICE-MIB manages transmission and reception attributes for Quality of Service (QoS) classification on Extreme Networks (formerly Enterasys) edge and access devices. It enables SNMP-based configuration and monitoring of traffic prioritization policies, including queue mapping, scheduling, and bandwidth allocation parameters.
The ENTERASYS-FIREWALL-MIB enables SNMP-based configuration, policy management, and real-time monitoring of Enterasys firewall appliances, specifically exposing metrics for access control rules, session states, and interface traffic statistics.
The ENTERASYS-LSNAT-MIB provides management access to Layer 4 Session NAT (LSNAT) entities on Enterasys Networks hardware, enabling the monitoring of active session states, translation table entries, and packet/byte counters for protocol-specific NAT mappings.
The ENTERASYS-POLICY-PROFILE-MIB enables SNMP-based monitoring and configuration of per-user policy profiles on Enterasys network edge and access devices. It facilitates the retrieval and management of specific user authentication and authorization parameters, including assigned access control lists and traffic shaping rules, to enforce granular network access policies.
The ENTERASYS-TWCB-MIB-2 module enables monitoring and management of Time-Weighted Cost-Based (TWCB) routing metrics and interface attributes on Enterasys Networks switches. It provides specific counters and gauges for tracking path costs and link states to support advanced traffic engineering and load balancing decisions.