ENTERASYS-ENTITY-SENSOR-MIB-EXT-MIB
The ENTERASYS-ENTITY-SENSOR-MIB-EXT-MIB extends the standard ENTITY-SENSOR-MIB to enable SNMP-based monitoring of physical environmental parameters, such as temperature, voltage, and fan status, on Enterasys network hardware. This module provides vendor-specific object identifiers to track sensor data that may not be fully covered by the generic industry standard definitions.
Imported Objects
Objects
32 total| Object Name |
|---|
etsysEntitySensorExtMIBThis MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID that provide extensions to the industry proposed standard ENTITY-SENSOR-MIB. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.85 |
etsysEntitySensorExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.85.1 |
etsysEntitySensorExtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.85.1.0 |
etsysEntityTempSensorStateChngAn etsysEntityTempSensorStateChng trap signifies that the SNMP entity, acting in an agent role, has detected the transition of etsysEntityTempSensorState from one enumerated state to another. It is RECOMMENDED that devices implementing this trap optionally varbind the entPhysicalName and entPhysicalDescr objects for this sensor. NOTIFICATION-TYPE .1.3.6.1.4.1.5624.1.2.85.1.0.1 |
etsysEntitySfpSensorStateChngAn etsysEntitySfpSensorStateChng trap signifies that the SNMP entity, acting in an agent role, has detected the transition of etsysEntitySfpSensorState from one enumerated state to another. It is RECOMMENDED that devices implementing this trap optionally varbind the entPhysicalName and entPhysicalDescr objects for this sensor. NOTIFICATION-TYPE .1.3.6.1.4.1.5624.1.2.85.1.0.2 |
etsysEntityTempSensorExt OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.85.1.1 |
etsysEntityTempSensorExtTableA table of per temperature sensor information that extends the general information provided in entPhySensorTable as defined in RFC3433. This table should contain an entry for every object contained in entPhySensorTable that has an entPhySensorType of type celsius(8). SEQUENCE OF EtsysEntityTempSensorExtEntry .1.3.6.1.4.1.5624.1.2.85.1.1.1 |
etsysEntityTempSensorExtEntryAn entry containing per temperature sensor information. EtsysEntityTempSensorExtEntry .1.3.6.1.4.1.5624.1.2.85.1.1.1.1 |
etsysEntityTempSensorStateThis object indicates the state of the temperature sensor.ro Enumeration .1.3.6.1.4.1.5624.1.2.85.1.1.1.1.1 |
etsysEntityTempSensorHotTempThe temperature value above which the ambient temperature is deemed to be hot. To correctly interpret the value of this object, the associated entPhySensorType, entPhySensorScale, and entPhySensorPrecision objects must also be examined.ro EntitySensorValue (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.5624.1.2.85.1.1.1.1.2 |
etsysEntityTempSensorWarmTempThe temperature value above which the ambient temperature is deemed to be warm, if it is below or equal the hot value. To correctly interpret the value of this object, the associated entPhySensorType, entPhySensorScale, and entPhySensorPrecision objects must also be examined.ro EntitySensorValue (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.5624.1.2.85.1.1.1.1.3 |
etsysEntityTempSensorCoolTempThe temperature value below which the ambient temperature is deemed to be cool, if it is above or equal the cold value. To correctly interpret the value of this object, the associated entPhySensorType, entPhySensorScale, and entPhySensorPrecision objects must also be examined.ro EntitySensorValue (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.5624.1.2.85.1.1.1.1.4 |
etsysEntityTempSensorColdTempThe temperature value below which the ambient temperature is deemed to be cold. To correctly interpret the value of this object, the associated entPhySensorType, entPhySensorScale, and entPhySensorPrecision objects must also be examined.ro EntitySensorValue (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.5624.1.2.85.1.1.1.1.5 |
etsysEntityTempSensorTrapEnableThis object indicates whether the etsysEntityTempSensorStateChng notification will be sent when the sensor state changes as defined by etsysEntityTempSensorState.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.85.1.1.1.1.6 |
etsysEntitySfpSensorExt OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.85.1.2 |
etsysEntitySfpSensorExtTableA table of per SFP sensor information that extends the general information provided in entPhySensorTable as defined in RFC3433. SEQUENCE OF EtsysEntitySfpSensorExtEntry .1.3.6.1.4.1.5624.1.2.85.1.2.1 |
etsysEntitySfpSensorExtEntryAn entry containing per SFP sensor information. EtsysEntitySfpSensorExtEntry .1.3.6.1.4.1.5624.1.2.85.1.2.1.1 |
etsysEntitySfpSensorStateThis object indicates the state of the SFP sensor.ro Enumeration .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.1 |
etsysEntitySfpSensorHighAlarmThe threshold value above which the sensor reading indicates an alarm state. To correctly interpret the value of this object, the associated entPhySensorType, entPhySensorScale, and entPhySensorPrecision objects must also be examined.ro EntitySensorValue (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.2 |
etsysEntitySfpSensorHighWarningThe threshold value above which the sensor reading indicates a warning state, if it is below or equal the hi alarm value. To correctly interpret the value of this object, the associated entPhySensorType, entPhySensorScale, and entPhySensorPrecision objects must also be examined.ro EntitySensorValue (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.3 |
etsysEntitySfpSensorLowWarningThe threshold value below which the sensor reading indicates a warning state, if it is above or equal the lo alarm value. To correctly interpret the value of this object, the associated entPhySensorType, entPhySensorScale, and entPhySensorPrecision objects must also be examined.ro EntitySensorValue (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.4 |
etsysEntitySfpSensorLowAlarmThe threshold value below which the sensor reading indicates an alarm state. To correctly interpret the value of this object, the associated entPhySensorType, entPhySensorScale, and entPhySensorPrecision objects must also be examined.ro EntitySensorValue (ENTITY-SENSOR-MIB) .1.3.6.1.4.1.5624.1.2.85.1.2.1.1.5 |
etsysEntitySfpSensorTrapEnableThis object indicates whether an etsysEntitySfpSensorStateChng notification will be sent when the sensor state changes as defined by etsysEntitySfpSensorState.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.85.1.2.2 |
etsysEntitySensorExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.85.2 |
etsysEntitySensorExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.85.2.1 |
etsysEntityTempSensorGroupThe group that controls and reports per temperature sensor extensions. Unknown .1.3.6.1.4.1.5624.1.2.85.2.1.1 |
etsysEntityTempSensorNotificationGroupThe group of per temperature sensor notifications for Entity Sensor Extensions. Unknown .1.3.6.1.4.1.5624.1.2.85.2.1.2 |
etsysEntitySfpSensorGroupThe group that controls and reports per SFP sensor extensions. Unknown .1.3.6.1.4.1.5624.1.2.85.2.1.3 |
etsysEntitySfpSensorNotificationGroupThe group of per SFP sensor notifications for Entity Sensor Extensions. Unknown .1.3.6.1.4.1.5624.1.2.85.2.1.4 |
etsysEntitySensorExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.85.2.2 |
etsysEntitySensorExtComplianceThe compliance statement for devices that support per temperature sensor extensions. Unknown .1.3.6.1.4.1.5624.1.2.85.2.2.1 |
etsysEntitySensorSfpExtComplianceThe compliance statement for devices that support per SFP sensor extensions. Unknown .1.3.6.1.4.1.5624.1.2.85.2.2.2 |
More MIBs from Enterasys
Browse all EnterasysMIBs →The ENTERASYS-OIDS-MIB module provides the foundational Object Identifier (OID) definitions required for SNMP-based monitoring of Enterasys Networks hardware system attributes, including device identity, software versions, and hardware inventory. It serves as the structural registry enabling network management systems to map and retrieve specific system-level metrics from Enterasys switches, routers, and wireless controllers.
The ENTERASYS-CLASS-OF-SERVICE-MIB manages transmission and reception attributes for Quality of Service (QoS) classification on Extreme Networks (formerly Enterasys) edge and access devices. It enables SNMP-based configuration and monitoring of traffic prioritization policies, including queue mapping, scheduling, and bandwidth allocation parameters.
The ENTERASYS-FIREWALL-MIB enables SNMP-based configuration, policy management, and real-time monitoring of Enterasys firewall appliances, specifically exposing metrics for access control rules, session states, and interface traffic statistics.
The ENTERASYS-LSNAT-MIB provides management access to Layer 4 Session NAT (LSNAT) entities on Enterasys Networks hardware, enabling the monitoring of active session states, translation table entries, and packet/byte counters for protocol-specific NAT mappings.
The ENTERASYS-POLICY-PROFILE-MIB enables SNMP-based monitoring and configuration of per-user policy profiles on Enterasys network edge and access devices. It facilitates the retrieval and management of specific user authentication and authorization parameters, including assigned access control lists and traffic shaping rules, to enforce granular network access policies.
The ENTERASYS-TWCB-MIB-2 module enables monitoring and management of Time-Weighted Cost-Based (TWCB) routing metrics and interface attributes on Enterasys Networks switches. It provides specific counters and gauges for tracking path costs and link states to support advanced traffic engineering and load balancing decisions.