ENTERASYS-DNS-RESOLVER-MIB
The ENTERASYS-DNS-RESOLVER-MIB enables SNMP-based configuration and monitoring of DNS resolver parameters, including server addresses, search domains, and timeout settings, on Enterasys Networks switching and routing platforms. This module facilitates the verification of name resolution infrastructure integrity and the dynamic adjustment of client-side DNS query behavior across the enterprise network.
Imported Objects
Objects
27 total| Object Name |
|---|
etsysDnsResolverMIBThis MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to configuration of the DNS resolution mechanisms on a device. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.63 |
etsysDnsResolverObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.63.1 |
etsysDnsResolverSystem OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.63.1.1 |
etsysDnsResolverServiceTypeThe type of DNS resolution service provided: recursiveOnly(1) indicates a stub resolver. iterativeOnly(2) indicates a normal full service resolver. recursiveAndIterative(3) indicates a full-service resolver which performs a mix of recursive and iterative queries.ro Enumeration .1.3.6.1.4.1.5624.1.2.63.1.1.1 |
etsysDnsResolverDomainNameThe DNS domain name where the device is located. If this object is not set, then all address lookups must provide fully qualified domains.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.2 |
etsysDnsResolverPrimaryServerAddrTypeThe type of data returned by etsysDnsResolverPrimaryServerAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.3 |
etsysDnsResolverPrimaryServerAddrThe network address of the primary name server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.4 |
etsysDnsResolverSecondaryServerAddrTypeThe type of data returned by etsysDnsResolverSecondaryServerAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.5 |
etsysDnsResolverSecondaryServerAddrThe network address of the secondary name server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.6 |
etsysDnsResolverTertiaryServerAddrTypeThe type of data returned by etsysDnsResolverTertiaryServerAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.7 |
etsysDnsResolverTertiaryServerAddrThe network address of the tertiary name server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.8 |
etsysDnsResolverQuaternaryServerAddrTypeThe type of data returned by etsysDnsResolverQuaternaryServerAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.9 |
etsysDnsResolverQuaternaryServerAddrThe network address of the quaternary name server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.10 |
etsysDnsResolverIpv4DnsZoneThe DNS zone to use for address to name lookups of IPv4 addresses.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.11 |
etsysDnsResolverIpv6DnsZoneThe DNS zone to use for address to name lookups of IPv6 addresses.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.12 |
etsysDnsResolverServerPortNumberThe port number (0-65535) the resolver uses for DNS queries.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.5624.1.2.63.1.1.13 |
etsysDnsResolverQueryTimeoutThe number of seconds before a DNS request is retried if the DNS server fails to respond.rw Unsigned32 .1.3.6.1.4.1.5624.1.2.63.1.1.14 |
etsysDnsResolverQueryRetriesThe number of times to retry a lookup request to a DNS server that has not successfully responded. This retry count is per name server, so each configured name server will make etsysDnsResolverQueryRetries attempts before giving up and moving to the next configured server.rw Unsigned32 .1.3.6.1.4.1.5624.1.2.63.1.1.15 |
etsysDnsResolverEnableStatusThe status of the DNS resolver on this device.rw Enumeration .1.3.6.1.4.1.5624.1.2.63.1.1.16 |
etsysDnsResolverConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.63.2 |
etsysDnsResolverGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.63.2.1 |
etsysDnsResolverPrimaryGroupThe group for all devices supporting DNS resolution. Unknown .1.3.6.1.4.1.5624.1.2.63.2.1.1 |
etsysDnsResolverSecondaryGroupThe group for all devices that support two or more servers for DNS resolution. Unknown .1.3.6.1.4.1.5624.1.2.63.2.1.2 |
etsysDnsResolverTertiaryGroupThe group for all devices that support three or more servers for DNS resolution. Unknown .1.3.6.1.4.1.5624.1.2.63.2.1.3 |
etsysDnsResolverQuaternaryGroupThe group for all devices that support four servers for DNS resolution. Unknown .1.3.6.1.4.1.5624.1.2.63.2.1.4 |
etsysDnsResolverCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.63.2.2 |
etsysDnsResolverComplianceThe compliance statement for devices that support DNS resolution. Unknown .1.3.6.1.4.1.5624.1.2.63.2.2.1 |
More MIBs from Enterasys
Browse all EnterasysMIBs →The ENTERASYS-OIDS-MIB module provides the foundational Object Identifier (OID) definitions required for SNMP-based monitoring of Enterasys Networks hardware system attributes, including device identity, software versions, and hardware inventory. It serves as the structural registry enabling network management systems to map and retrieve specific system-level metrics from Enterasys switches, routers, and wireless controllers.
The ENTERASYS-CLASS-OF-SERVICE-MIB manages transmission and reception attributes for Quality of Service (QoS) classification on Extreme Networks (formerly Enterasys) edge and access devices. It enables SNMP-based configuration and monitoring of traffic prioritization policies, including queue mapping, scheduling, and bandwidth allocation parameters.
The ENTERASYS-FIREWALL-MIB enables SNMP-based configuration, policy management, and real-time monitoring of Enterasys firewall appliances, specifically exposing metrics for access control rules, session states, and interface traffic statistics.
The ENTERASYS-LSNAT-MIB provides management access to Layer 4 Session NAT (LSNAT) entities on Enterasys Networks hardware, enabling the monitoring of active session states, translation table entries, and packet/byte counters for protocol-specific NAT mappings.
The ENTERASYS-POLICY-PROFILE-MIB enables SNMP-based monitoring and configuration of per-user policy profiles on Enterasys network edge and access devices. It facilitates the retrieval and management of specific user authentication and authorization parameters, including assigned access control lists and traffic shaping rules, to enforce granular network access policies.
The ENTERASYS-TWCB-MIB-2 module enables monitoring and management of Time-Weighted Cost-Based (TWCB) routing metrics and interface attributes on Enterasys Networks switches. It provides specific counters and gauges for tracking path costs and link states to support advanced traffic engineering and load balancing decisions.