ENTERASYS-CN-MIB-EXT-MIB
The ENTERASYS-CN-MIB-EXT-MIB enables configuration of proprietary congestion notification queue profiles on Enterasys hardware platforms that lack direct hardware queue management capabilities. It maps standard IEEE 802.1 congestion point parameters to specific, hardware-defined profile indices to control traffic prioritization and queue behavior.
Imported Objects
Objects
31 total| Object Name |
|---|
etsysCnMibExtMIBThis MIB module defines a portion of the SNMP MIB under
the Enterasys Networks enterprise OID pertaining to
proprietary extensions to the IEEE8021-CN-MIB.
This MIB was designed to be used for configuration of
CN queue profiles. The standard
IEEE8021-CN-MIB provides a congestion point object to
manage parameters that are specific to a congestion
notification queue, however many platforms do not
support direct configuration of queues in the hardware.
Some hardware support for CN provides the ability to
configure a set of profiles which are then mapped to
hardware queues. The number of profiles supported is
hardware specific. A queue profile provides the same set
of parameters that are provided in a congestion point
managed object. Each congestion point is then provided
a queue profile index which maps the congestion point
object to a profile. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.95 |
etsysCnMibExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.95.1 |
etsysCnMibExtSysBranch OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.95.1.1 |
etsysCnMibExtQpTypeTableA table of CN queue profile types. SEQUENCE OF EtsysCnMibExtQpTypeEntry .1.3.6.1.4.1.5624.1.2.95.1.1.1 |
etsysCnMibExtQpTypeEntryAn entry in the CN queue profile type table. EtsysCnMibExtQpTypeEntry .1.3.6.1.4.1.5624.1.2.95.1.1.1.1 |
etsysCnMibExtQptIdentifierThe CN queue profile type within the system to which the
information in this entry applies. Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.1.1.1.1 |
etsysCnMibExtQptDescA textual description of the CN queue profile type for this
entry.ro SnmpAdminString .1.3.6.1.4.1.5624.1.2.95.1.1.1.1.2 |
etsysCnMibExtQptMaxQpEntriesThe maximum number of CN queue profile entries allowed for this
profile type.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.1.1.1.3 |
etsysCnMibExtQptSupportThis object represents the CN queue
profile parameters that are supported by queue profile
entries of the queue profile type defined by this entry.ro Bits .1.3.6.1.4.1.5624.1.2.95.1.1.1.1.4 |
etsysCnMibExtMaxCompActivePriValsThe maximum number of active ieee8021CnCompntPriTable
entries allowed per component in the system. An entry
is active if the ieee8021CnComPriRowStatus is active.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.1.2 |
etsysCnMibExtCompBranch OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.95.1.2 |
etsysCnMibExtQpTableA table of CN queue configuration profiles. SEQUENCE OF EtsysCnMibExtQpEntry .1.3.6.1.4.1.5624.1.2.95.1.2.1 |
etsysCnMibExtQpEntryAn entry in the CN profile table. EtsysCnMibExtQpEntry .1.3.6.1.4.1.5624.1.2.95.1.2.1.1 |
etsysCnMibExtQpComponentIdThe bridge component within the system to which the information
in this etsysCnMibExtQpEntry applies. If the system
is not a Bridge, or if only one component is present in the
Bridge, then this variable (index) MUST be equal to 1. IEEE8021PbbComponentIdentifier (IEEE8021-TC-MIB) .1.3.6.1.4.1.5624.1.2.95.1.2.1.1.1 |
etsysCnMibExtQpTypeIdThis object represents the CN queue profile type to which this
entry applies. Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.2.1.1.2 |
etsysCnMibExtQpIndexThis object represents the CN queue profile to which this
entry applies. Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.2.1.1.3 |
etsysCnMibExtQpSizeSetPointThis object is the set point for the queues managed by this
profile entry. Congestion Notification Messages are transmitted
to the sources of frames queued in this CP's queue in order to
keep the total number of octets stored in the queue at this set
point.rw Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.2.1.1.4 |
etsysCnMibExtQpFeedbackWeightThis object controls the weight (cpW) change in queue length
in the calculation of cpFb when the Congestion Point is
generating a Congestion Notification Message.
The weight cpW is equal to two to the power of this object.
Thus, if this object contains a -1, cpW = 1/2.rw Integer32 (-10..10) .1.3.6.1.4.1.5624.1.2.95.1.2.1.1.5 |
etsysCnMibExtQpMinSampleBaseThis object determines the minimum number of octets to
enqueue in the Congestion Point's queue between transmissions
of Congestion Notification Messages.rw Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.2.1.1.6 |
etsysCnMibExtQpMinHeaderOctetsSpecifies the minimum number of octets to be returned in a
Congestion Notification Message from the mac_service_data_unit
of the data frame that triggered transmission of the CNM. If
the mac_service_data_unit has fewer octets than the value of
this object, then all of the mac_service_data_unit is returned
in the CNM.rw Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.2.1.1.7 |
etsysCnMibExtQpRowStatusThis object indicates the status of an entry, and is used to
create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.95.1.2.1.1.8 |
etsysCnMibExtCpTableA table of CN congestion point objects. SEQUENCE OF EtsysCnMibExtCpEntry .1.3.6.1.4.1.5624.1.2.95.1.2.2 |
etsysCnMibExtCpEntryAn entry in the CN congestion point table. EtsysCnMibExtCpEntry .1.3.6.1.4.1.5624.1.2.95.1.2.2.1 |
etsysCnMibExtCpQpTypeIdThis object represents the CN queue profile type to which this
entry applies.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.2.2.1.1 |
etsysCnMibExtCpQpIndexThis object represents the CN queue profile to which this
entry applies.rw Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.2.2.1.2 |
etsysCnMibExtGlobalTableA table of CN global configuration and status objects. SEQUENCE OF EtsysCnMibExtGlobalEntry .1.3.6.1.4.1.5624.1.2.95.1.2.3 |
etsysCnMibExtGlobalEntryAn entry in the CN global table. EtsysCnMibExtGlobalEntry .1.3.6.1.4.1.5624.1.2.95.1.2.3.1 |
etsysCnMibExtGlobalActivePriValsThe number of active ieee8021CnCompntPriTable entries for this
component in the system. An entry is active if the
ieee8021CnComPriRowStatus is active.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.95.1.2.3.1.1 |
etsysCnMibExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.95.2 |
etsysCnMibExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.95.2.1 |
etsysCnMibExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.95.2.2 |
More MIBs from Enterasys
Browse all EnterasysMIBs →The ENTERASYS-OIDS-MIB module provides the foundational Object Identifier (OID) definitions required for SNMP-based monitoring of Enterasys Networks hardware system attributes, including device identity, software versions, and hardware inventory. It serves as the structural registry enabling network management systems to map and retrieve specific system-level metrics from Enterasys switches, routers, and wireless controllers.
The ENTERASYS-CLASS-OF-SERVICE-MIB manages transmission and reception attributes for Quality of Service (QoS) classification on Extreme Networks (formerly Enterasys) edge and access devices. It enables SNMP-based configuration and monitoring of traffic prioritization policies, including queue mapping, scheduling, and bandwidth allocation parameters.
The ENTERASYS-FIREWALL-MIB enables SNMP-based configuration, policy management, and real-time monitoring of Enterasys firewall appliances, specifically exposing metrics for access control rules, session states, and interface traffic statistics.
The ENTERASYS-LSNAT-MIB provides management access to Layer 4 Session NAT (LSNAT) entities on Enterasys Networks hardware, enabling the monitoring of active session states, translation table entries, and packet/byte counters for protocol-specific NAT mappings.
The ENTERASYS-POLICY-PROFILE-MIB enables SNMP-based monitoring and configuration of per-user policy profiles on Enterasys network edge and access devices. It facilitates the retrieval and management of specific user authentication and authorization parameters, including assigned access control lists and traffic shaping rules, to enforce granular network access policies.
The ENTERASYS-TWCB-MIB-2 module enables monitoring and management of Time-Weighted Cost-Based (TWCB) routing metrics and interface attributes on Enterasys Networks switches. It provides specific counters and gauges for tracking path costs and link states to support advanced traffic engineering and load balancing decisions.