ENTERASYS-AUTO-TRACKING-MIB
The ENTERASYS-AUTO-TRACKING-MIB enables SNMP-based configuration and monitoring of the Auto Tracking feature on Enterasys Networks switches, specifically managing the association of MAC addresses with physical port locations to automate network topology discovery and device relocation detection.
Imported Objects
Objects
25 total| Object Name |
|---|
etsysAutoTrackingMIBThis MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to configuration of Auto Tracking on a device. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.92 |
etsysAutoTrackingBody OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.92.2 |
etsysAutoTrackingObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.92.2.1 |
etsysAutoTrackingSystem OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.92.2.1.1 |
etsysAutoTrackingSystemEnableWhen enabled(1), all objects in this MIB are fully active. When disabled(2), this object overrides all other object settings in this MIB without affecting their values.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.92.2.1.1.1 |
etsysAutoTrackingSystemAccountEnableWhen enabled(1), RADIUS accounting start, interim and stop frames are sent to the configured RADIUS server(s). When disabled(2), accounting packets are not sent to the RADIUS server.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.92.2.1.1.2 |
etsysAutoTrackingPort OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.92.2.1.2 |
etsysAutoTrackingPortTableA table containing configuration objects for each auto tracking port. The configuration for each port in this table must be non-volatile. SEQUENCE OF EtsysAutoTrackingPortEntry .1.3.6.1.4.1.5624.1.2.92.2.1.2.1 |
etsysAutoTrackingPortEntryEach conceptual row provides control over all of the initial values used by each auto authenticated MAC on this port. Subsequent changes to rows in this table, except where noted, have no effect on existing auto tracking sessions on this port. EtsysAutoTrackingPortEntry .1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1 |
etsysAutoTrackingPortEnableWhen set to enabled(1), a platform dependent triggering mechanism initiates auto tracking for sessions on this port. When disabled(2), auto tracking is disabled and all currently auto tracking sessions or those in the process of auto tracking on this port are terminated.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.1 |
etsysAutoTrackingPortAuthenticationsAllowedThe maximum number of concurrent auto tracking sessions supported on this port on this module. The default value of this object is platform and resource dependent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.2 |
etsysAutoTrackingPortAuthenticationsAllocatedThe maximum number of auto tracking sessions permitted on this port on this module. This value must be non-zero and be less than or equal to the value of etsysAutoTrackingPortAuthenticationsAllowed. Setting this object to a value less than the current number of auto tracking sessions on this port prevents further auto tracking sessions, but has no affect on the current sessions.rw Unsigned32 .1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.3 |
etsysAutoTrackingPortSessionTimeoutThe maximum number of seconds an auto tracking session may last before termination of the session. A value of zero indicates that the global etsysMultiAuthSessionTimeout value will be used.rw Unsigned32 (0|1..65535) UNITS "seconds" .1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.4 |
etsysAutoTrackingPortIdleTimeoutThe maximum number of consecutive seconds an auto tracking session may be idle before termination of the session. A value of zero indicates that the global etsysMultiAuthSessionTimeout value will be used.rw Unsigned32 (0|1..65535) UNITS "seconds" .1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.5 |
etsysAutoTrackingPortRadiusTimeoutProfileIndexThe policy profile index to be used by the auto-tracking provisioning agent if a complete RADIUS server timeout occurs. This policy profile index will only be used if the auto-tracking provisioning agent is the highest precedent multiauth provisioning agent to provision the session. Auto-tracking has the lowest precedence by default. The value will be overwritten by the policy profile index in etsysAutoTrackingPortRadiusRejectProfileIndex if both a rejection and a complete timeout occur. A value of (0) indicates that no policy profile index is configured for complete RADIUS server timeouts.rw Unsigned32 (0|1..65535) .1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.6 |
etsysAutoTrackingPortRadiusRejectProfileIndexThe policy profile index to be used by the auto-tracking provisioning agent if a complete RADIUS server timeout occurs. This policy profile index will only be used if the auto-tracking provisioning agent is the highest precedent multiauth provisioning agent to provision the session. Auto-tracking has the lowest precedence by default. The value will not be overwritten by the policy profile index in etsysAutoTrackingPortRadiusTimeoutProfileIndex if both a rejection and a complete timeout occur. A value of (0) indicates that no policy profile index is configured for complete RADIUS server timeouts.rw Unsigned32 (0|1..65535) .1.3.6.1.4.1.5624.1.2.92.2.1.2.1.1.7 |
etsysAutoTrackingConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.92.3 |
etsysAutoTrackingGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.92.3.1 |
etsysAutoTrackingSystemGroupGlobal object controlling this feature. Global objects that affect how the credentials are presented to the authentication server.deprecated Unknown .1.3.6.1.4.1.5624.1.2.92.3.1.1 |
etsysAutoTrackingPortGroupObjects describing the Auto Tracking variables for each port.deprecated Unknown .1.3.6.1.4.1.5624.1.2.92.3.1.2 |
etsysAutoTrackingSystemGroup2Global object controlling this feature. Global objects that affect how the credentials are presented to the authentication server. Unknown .1.3.6.1.4.1.5624.1.2.92.3.1.3 |
etsysAutoTrackingPortGroup2Objects describing the Auto Tracking variables for each port. Unknown .1.3.6.1.4.1.5624.1.2.92.3.1.4 |
etsysAutoTrackingCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.92.3.2 |
etsysAutoTrackingComplianceThe compliance statement for devices that support Auto Tracking.deprecated Unknown .1.3.6.1.4.1.5624.1.2.92.3.2.1 |
etsysAutoTrackingCompliance2The compliance statement for devices that support Auto Tracking. Unknown .1.3.6.1.4.1.5624.1.2.92.3.2.2 |
More MIBs from Enterasys
Browse all EnterasysMIBs →The ENTERASYS-OIDS-MIB module provides the foundational Object Identifier (OID) definitions required for SNMP-based monitoring of Enterasys Networks hardware system attributes, including device identity, software versions, and hardware inventory. It serves as the structural registry enabling network management systems to map and retrieve specific system-level metrics from Enterasys switches, routers, and wireless controllers.
The ENTERASYS-CLASS-OF-SERVICE-MIB manages transmission and reception attributes for Quality of Service (QoS) classification on Extreme Networks (formerly Enterasys) edge and access devices. It enables SNMP-based configuration and monitoring of traffic prioritization policies, including queue mapping, scheduling, and bandwidth allocation parameters.
The ENTERASYS-FIREWALL-MIB enables SNMP-based configuration, policy management, and real-time monitoring of Enterasys firewall appliances, specifically exposing metrics for access control rules, session states, and interface traffic statistics.
The ENTERASYS-LSNAT-MIB provides management access to Layer 4 Session NAT (LSNAT) entities on Enterasys Networks hardware, enabling the monitoring of active session states, translation table entries, and packet/byte counters for protocol-specific NAT mappings.
The ENTERASYS-POLICY-PROFILE-MIB enables SNMP-based monitoring and configuration of per-user policy profiles on Enterasys network edge and access devices. It facilitates the retrieval and management of specific user authentication and authorization parameters, including assigned access control lists and traffic shaping rules, to enforce granular network access policies.
The ENTERASYS-TWCB-MIB-2 module enables monitoring and management of Time-Weighted Cost-Based (TWCB) routing metrics and interface attributes on Enterasys Networks switches. It provides specific counters and gauges for tracking path costs and link states to support advanced traffic engineering and load balancing decisions.