ENTERASYS-APPLICATION-SIGNATURE-MIB
The ENTERASYS-APPLICATION-SIGNATURE-MIB enables SNMP-based configuration and management of custom application signature definitions on Extreme Networks (formerly Enterasys) switching and routing hardware. This module facilitates the creation and enforcement of traffic classification rules to identify specific network applications for policy enforcement and traffic analysis.
Imported Objects
Objects
23 total| Object Name |
|---|
etsysApplicationSignatureMIBThis MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to configuration of custom application signatures on Extreme Networks devices. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.107 |
etsysApplicationSignatureMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.107.1 |
etsysAppSignGroupTableA table that contains the standard Application Groups for the Extreme Network deep packet inspection engine. SEQUENCE OF EtsysAppSignGroupEntry .1.3.6.1.4.1.5624.1.2.107.1.1 |
etsysAppSignGroupEntryAn entry that ties a given application Group Name to a particular application group ID. EtsysAppSignGroupEntry .1.3.6.1.4.1.5624.1.2.107.1.1.1 |
etsysAppSignGroupIdA pre-defined unique group index which points to the group to which the application belongs. Unsigned32 .1.3.6.1.4.1.5624.1.2.107.1.1.1.1 |
etsysAppSignGroupNameA pre-defined application group name.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.107.1.1.1.2 |
etsysAppSignDisplayNameTableA table that describes attributes of a user defined application display name. SEQUENCE OF EtsysAppSignDisplayNameEntry .1.3.6.1.4.1.5624.1.2.107.1.2 |
etsysAppSignDisplayNameEntryDescribes a particular entry within the etsysAppSignDisplayNameTable. EtsysAppSignDisplayNameEntry .1.3.6.1.4.1.5624.1.2.107.1.2.1 |
etsysAppSignDisplayIdA unique ID assigned to a specific extended signature. The user can only assign an index in a range from 5000 to 5999. The rest of the indices are reserved for internal use. Unsigned32 .1.3.6.1.4.1.5624.1.2.107.1.2.1.1 |
etsysAppSignDisplayNameA user friendly name assigned to this extended signature. The display name and display ID MUST be unique within the scope of a single managed entity. This object MUST NOT be modifiable while this entry's RowStatus is active(1) or if etsysAppSignDisplayId is a reserved index.rw SnmpAdminString .1.3.6.1.4.1.5624.1.2.107.1.2.1.2 |
etsysAppSignDisplayNameRowStatusThis object allows for the dynamic creation and deletion of entries within the etsysAppSignDisplayNameTable as well as the activation and deactivation of these entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.107.1.2.1.3 |
etsysAppSignPatternTableA table that describes attributes of a user defined pattern string. SEQUENCE OF EtsysAppSignPatternEntry .1.3.6.1.4.1.5624.1.2.107.1.3 |
etsysAppSignPatternEntryAn entry describing the matching pattern of a WebApplRule and its assigned index. For use by the Extreme Network deep packet inspection engine. EtsysAppSignPatternEntry .1.3.6.1.4.1.5624.1.2.107.1.3.1 |
etsysAppSignPatternIndexA unique identifier for a pattern string. The user can only assign an index in a range from 1000000 to 2000000. The rest of the indices are reserved for internal use. Unsigned32 .1.3.6.1.4.1.5624.1.2.107.1.3.1.1 |
etsysAppSignPatternA case sensitive string for matching against the 'host' field of an http request packet, or the 'server name' in the 'client Hello' packet of a TLS session. This is used to identify the application.rw DisplayString .1.3.6.1.4.1.5624.1.2.107.1.3.1.2 |
etsysAppSignPatternRowStatusThis object allows the dynamic creation and deletion of entries within the etsysAppSignPatternTable as well as the activation and deactivation of these entries. etsysAppSignPatternRowStatus MUST NOT be set to active(1) and createAndGo(4) if the etsysAppSignPattern object contains an empty string.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.107.1.3.1.3 |
etsysApplicationSignatureConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.107.2 |
etsysAppSignGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.107.2.1 |
etsysAppSignGroupA collection of objects that define attributes of an application group. Unknown .1.3.6.1.4.1.5624.1.2.107.2.1.1 |
etsysAppSignDisplayNameGroupA collection of objects that define attributes of an application display name. Unknown .1.3.6.1.4.1.5624.1.2.107.2.1.2 |
etsysAppSignPatternGroupA collection of objects that define attributes of a configured pattern string. Unknown .1.3.6.1.4.1.5624.1.2.107.2.1.3 |
etsysAppSignCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.107.2.2 |
etsysAppSignComplianceThis group is mandatory for all devices that support configuration of deep packet inspection application signatures. Unknown .1.3.6.1.4.1.5624.1.2.107.2.2.1 |
More MIBs from Enterasys
Browse all EnterasysMIBs →The ENTERASYS-OIDS-MIB module provides the foundational Object Identifier (OID) definitions required for SNMP-based monitoring of Enterasys Networks hardware system attributes, including device identity, software versions, and hardware inventory. It serves as the structural registry enabling network management systems to map and retrieve specific system-level metrics from Enterasys switches, routers, and wireless controllers.
The ENTERASYS-CLASS-OF-SERVICE-MIB manages transmission and reception attributes for Quality of Service (QoS) classification on Extreme Networks (formerly Enterasys) edge and access devices. It enables SNMP-based configuration and monitoring of traffic prioritization policies, including queue mapping, scheduling, and bandwidth allocation parameters.
The ENTERASYS-FIREWALL-MIB enables SNMP-based configuration, policy management, and real-time monitoring of Enterasys firewall appliances, specifically exposing metrics for access control rules, session states, and interface traffic statistics.
The ENTERASYS-LSNAT-MIB provides management access to Layer 4 Session NAT (LSNAT) entities on Enterasys Networks hardware, enabling the monitoring of active session states, translation table entries, and packet/byte counters for protocol-specific NAT mappings.
The ENTERASYS-POLICY-PROFILE-MIB enables SNMP-based monitoring and configuration of per-user policy profiles on Enterasys network edge and access devices. It facilitates the retrieval and management of specific user authentication and authorization parameters, including assigned access control lists and traffic shaping rules, to enforce granular network access policies.
The ENTERASYS-TWCB-MIB-2 module enables monitoring and management of Time-Weighted Cost-Based (TWCB) routing metrics and interface attributes on Enterasys Networks switches. It provides specific counters and gauges for tracking path costs and link states to support advanced traffic engineering and load balancing decisions.