ELTEX-MES-eltInterfaces
Standard SNMP MIB module defining data structures for ELTEX-MES-eltInterfaces.
Imported Objects
Objects
16 total| Object Name |
|---|
eltSwIfTableSwitch media specific information and configuration of the device
interfaces. SEQUENCE OF EltSwIfEntry .1.3.6.1.4.1.35265.1.23.43.1 |
eltSwIfEntryDefines the contents of each line in the eltSwIfTable table. EltSwIfEntry .1.3.6.1.4.1.35265.1.23.43.1.1 |
eltSwIfIndexIndex to the eltSwIfTable. The interface defined by a
particular value of this index is the same interface as
identified by the same value of ifIndex (MIB II).ro INTEGER .1.3.6.1.4.1.35265.1.23.43.1.1.1 |
eltSwIfSfpOperationModeThis variable indicates plugged in SFP transceiver operation mode.rw Enumeration .1.3.6.1.4.1.35265.1.23.43.1.1.2 |
eltSwIfUtilizationTableSwitch ports utilization configuration and information. SEQUENCE OF EltSwIfUtilizationEntry .1.3.6.1.4.1.35265.1.23.43.2 |
eltSwIfUtilizationEntryDefines the contents of each line in the eltSwIfUtilizationTable table. EltSwIfUtilizationEntry .1.3.6.1.4.1.35265.1.23.43.2.1 |
eltSwIfUtilizationIfIndexA unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.35265.1.23.43.2.1.1 |
eltSwIfUtilizationAverageTimeAn average load time in seconds for which interface
utilization is calculated.rw INTEGER .1.3.6.1.4.1.35265.1.23.43.2.1.2 |
eltSwIfUtilizationCurrentInPktsThe total number of all (UC, MC and BC) packets
received on the interface during last 5 seconds.ro Counter .1.3.6.1.4.1.35265.1.23.43.2.1.3 |
eltSwIfUtilizationCurrentInRateThe inbound rate in kbit/sec
on the interface during last 5 seconds.ro Counter .1.3.6.1.4.1.35265.1.23.43.2.1.4 |
eltSwIfUtilizationCurrentOutPktsThe total number of all (UC, MC and BC) packets
sent out of the interface during last 5 seconds.ro Counter .1.3.6.1.4.1.35265.1.23.43.2.1.5 |
eltSwIfUtilizationCurrentOutRateThe outbound rate in kbit/sec
on the interface during last 5 seconds.ro Counter .1.3.6.1.4.1.35265.1.23.43.2.1.6 |
eltSwIfUtilizationAverageInPktsThe total number of all (UC, MC and BC) packets
received on the interface during configured
load average time for this interface.ro Counter .1.3.6.1.4.1.35265.1.23.43.2.1.7 |
eltSwIfUtilizationAverageInRateThe inbound rate in kbit/sec on the interface
during configured load average time for this interface.ro Counter .1.3.6.1.4.1.35265.1.23.43.2.1.8 |
eltSwIfUtilizationAverageOutPktsThe total number of all (UC, MC and BC) packets
sent out of the interface during configured
load average time for this interface.ro Counter .1.3.6.1.4.1.35265.1.23.43.2.1.9 |
eltSwIfUtilizationAverageOutRateThe outbound rate in kbit/sec on the interface
during configured load average time for this interface.ro Counter .1.3.6.1.4.1.35265.1.23.43.2.1.10 |
More MIBs from Eltex Enterprise
Browse all Eltex EnterpriseMIBs →The ELTEX-LTE8ST MIB module provides SNMP-based monitoring and management capabilities for ELTEX LTE-8ST cellular routers, exposing critical operational metrics such as cellular interface status, signal strength (RSRP/RSRQ), network registration states, and active data session statistics.
SNMP MIB module
SNMP MIB module
SNMP MIB module
SNMP MIB module
The ELTEX-SMI-ACTUAL module provides the foundational Structure of Management Information (SMI) definitions for Eltex Networks hardware, enabling the monitoring of device-specific operational metrics such as interface statistics, system resources, and environmental sensors via SNMP. It serves as the core schema required for network management systems to interpret and collect telemetry data from Eltex switches, routers, and access points.