ELTEX-MES-IF-EXTENSION-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
18
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
eltMesIfExtensionMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.35265.1.23.1.276.1 |
eltMesIfExtDot1qCustomEtherType OBJECT IDENTIFIER .1.3.6.1.4.1.35265.1.23.1.276.1.3 |
eltIfDot1qCustomEgressEtherTypeTableA list of the interfaces that support
the 802.1q custom egress ethertype feature. SEQUENCE OF EltIfDot1qCustomEgressEtherTypeEntry .1.3.6.1.4.1.35265.1.23.1.276.1.3.1 |
eltIfDot1qCustomEgressEtherTypeEntryAn entry containing the custom egress EtherType
information for the interface.
Only interfaces with custom 802.1q
ethertype control are listed in the
table. EltIfDot1qCustomEgressEtherTypeEntry .1.3.6.1.4.1.35265.1.23.1.276.1.3.1.1 |
eltIfDot1qCustomEgressEtherTypeThe Dot1qEtherType allow administrator
to select a non-standard (other than 0x8100)
2-byte ethertype for the interface to
interoperate with third party vendor's system
that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames.
The current administrative value of the
802.1q ethertype for the interface. The
administrative 802.1q ethertype value may
differ from the operational 802.1q ethertype
value. On some platforms, 802.1q ethertype
may be assigned per group rather than per port.
If multiple ports belong to a port group,
the 802.1q ethertype assigned to any of
the ports in such group will apply to all
ports in the same group.
To configure non-standard dot1q egress ethertype
is only recommended when the Eltex device
is connected to any third party vendor device.rw Integer32 (0..65535 ) .1.3.6.1.4.1.35265.1.23.1.276.1.3.1.1.1 |
eltIfDot1qCustomIngressEtherTypeTableA list of the interfaces that support
the 802.1q custom ingress ethertype feature. SEQUENCE OF EltIfDot1qCustomIngressEtherTypeEntry .1.3.6.1.4.1.35265.1.23.1.276.1.3.2 |
eltIfDot1qCustomIngressEtherTypeEntryAn entry containing the custom ingress EtherTypes
set for the interface to classify stag and ctag.
Only interfaces with custom 802.1q
ethertype control are listed in the
table. EltIfDot1qCustomIngressEtherTypeEntry .1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1 |
eltIfDot1qCustomIngressEtherType1This fields holds default ethertype 0x8100 or zero
if ethertype 0x8100 is not used to classify SVLAN on
current interface.rw Integer32 (0 | 33024 ) .1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.1 |
eltIfDot1qCustomIngressEtherType2The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames.rw Integer32 (0..33023 | 33025..65535) .1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.2 |
eltIfDot1qCustomIngressEtherType3The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames.rw Integer32 (0..33023 | 33025..65535) .1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.3 |
eltIfDot1qCustomIngressEtherType4The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames.rw Integer32 (0..33023 | 33025..65535) .1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.4 |
eltIfDot1qCustomIngressEtherType5The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames.rw Integer32 (0..33023 | 33025..65535) .1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.5 |
eltIfDot1qCustomIngressEtherType6The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames.rw Integer32 (0..33023 | 33025..65535) .1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.6 |
eltIfDot1qCustomIngressEtherType7The custom ethertype to classify ingress vlan tags (SVLAN)
for the interface to interoperate with third party vendor's
system that do not use the standard 0x8100 ethertype
to identify 802.1q-tagged frames.rw Integer32 (0..33023 | 33025..65535) .1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.7 |
eltMesIfExtDot1q OBJECT IDENTIFIER .1.3.6.1.4.1.35265.1.23.1.276.1.4 |
eltIfDot1qIngressCvlanTableA list of the interfaces ingress C-VLAN settings. SEQUENCE OF EltIfDot1qIngressCvlanEntry .1.3.6.1.4.1.35265.1.23.1.276.1.4.1 |
eltIfDot1qIngressCvlanEntryAn entry containing ingress C-VLAN assignment
for the interface. EltIfDot1qIngressCvlanEntry .1.3.6.1.4.1.35265.1.23.1.276.1.4.1.1 |
eltIfDot1qIngressCvlanTagC-VLAN tag for the interface assigned
in ingress pipe. 0 means no C-VLAN assignment.rw Integer32 (0..4095 ) .1.3.6.1.4.1.35265.1.23.1.276.1.4.1.1.1 |