EBN-MIB
The MIB Module for Extended Border Node
Main OID:
ebnMIB.1.3.6.1.4.1.727.7.2.1.34.7
46
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
ebnMIBThe MIB Module for Extended Border Node MODULE-IDENTITY .1.3.6.1.4.1.727.7.2.1.34.7 |
ebnObjects OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.34.7.1 |
ebnDir OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.34.7.1.1 |
ebnDirTableThe EBN Directory Table. This table is an extension
to the APPN MIB's appnDirTable. Entries in this table
are in one-to-one correspondence with entries in the
appnDirTable, with corresponding entries having identical
values for their respective indexes. SEQUENCE OF EbnDirEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.1.1 |
ebnDirEntryEntry in the EBN Directory Table. EbnDirEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.1.1.1 |
ebnDirLuNameFully qualified network LU name in the domain of a serving
network node. If this object has the same value as the
appnDirLuName object in the APPN MIB, then the two objects
are referring to the same LU. SnaNAUWildcardName .1.3.6.1.4.1.727.7.2.1.34.7.1.1.1.1.1 |
ebnDirSubnetAffiliationSpecifies the subnetwork affiliation of the LU:
- native(1) : The LU is in the native APPN subnetwork.
- nonNative(2) : The LU is in a non-native APPN subnetwork.
- subarea(3) : The LU is in a subarea network.ro Enumeration .1.3.6.1.4.1.727.7.2.1.34.7.1.1.1.1.2 |
ebnIsRscv OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.34.7.1.2 |
ebnIsRscvTableThe EBN Intermediate Session RSCV table. This table is an
extension to the appnIsInTable. It contains the RSCV and COS
used in the direction of the BIND destination. There is an
entry in this table for each session that traverses an ISTG
when it enters or leaves this EBN, with corresponding entries
having identical values for their respective indexes. SEQUENCE OF EbnIsRscvEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.2.1 |
ebnIsRscvEntryEntry in ebnIsRscvTable. EbnIsRscvEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.2.1.1 |
ebnIsRscvCpNameThe network-qualified control point name of the node at
which the session and PCID originated. For APPN and LEN
nodes, this is either CP name of the APPN node at which
the origin LU is located or the CP name of the NN serving
the LEN node at which the origin LU is located. For DLUR
resources it is the name of the owning SSCP.
If this object has the same value as the appnIsInFqCpName
object in the APPN MIB, then the two objects are referring to
the same APPN control point. SnaControlPointName (APPN-MIB) .1.3.6.1.4.1.727.7.2.1.34.7.1.2.1.1.1 |
ebnIsRscvPcidThe procedure correlation identifier (PCID) of a session.
It is an 8-octet value.
If this object has the same value as the appnIsInPcid object
in the APPN MIB, and if the corresponding ebnIsRscvCpName
object has the same value as the corresponding
appnIsInFqCpName object, then the entries indexed by these
objects are referring to the same session. OCTET STRING .1.3.6.1.4.1.727.7.2.1.34.7.1.2.1.1.2 |
ebnIsRscvDestinationRouteThe route selection control vector (RSCV x'2B') used in the
direction towards the SLU.ro OCTET STRING .1.3.6.1.4.1.727.7.2.1.34.7.1.2.1.1.3 |
ebnIsRscvDestinationCosThe Class of Service (COS) name used in the direction
towards the SLU.
Because the characters allowed in an SNA COS name come from
a restricted character set, these names are not subject to
internationalization.ro DisplayString .1.3.6.1.4.1.727.7.2.1.34.7.1.2.1.1.4 |
ebnDirConfig OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.34.7.1.3 |
ebnSearchCacheTimeThe amount of time in minutes an extended border node will
retain information about a multi-subnetwork search, once
that that search terminates. A value 0 indicates that the
EBN has no defined limit, and the number of entries is
bounded only by memory.ro Unsigned32 UNITS "minutes" .1.3.6.1.4.1.727.7.2.1.34.7.1.3.1 |
ebnMaxSearchCacheThe maximum number of multi-subnet entries to be cached.
The value 0 indicates that the local node has no defined
limit, and the number of entries is bounded only by
memory.ro Unsigned32 UNITS "entries" .1.3.6.1.4.1.727.7.2.1.34.7.1.3.2 |
ebnDefaultSubnetVisitCountThe default maximum number of subnetworks a LOCATE search
procedure may traverse.ro Unsigned32 UNITS "topology subnetworks" .1.3.6.1.4.1.727.7.2.1.34.7.1.3.3 |
ebnCOS OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.34.7.1.4 |
ebnCosMapTableThe EBN COS Mapping Table. This table specifies how non-
native COS values are mapped to COS values defined in the
native subnetwork.
Note: The COS mappings that an EBN performs are determined
by multiple factors, one of which is a set of user-defined
initial mappings. This table returns the COS mappings that
the EBN is actually performing at the time it is queried,
rather than the user-defined initial ones. SEQUENCE OF EbnCosMapEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.4.1 |
ebnCosMapEntryAn entry in the EBN COS Mapping table. EbnCosMapEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.4.1.1 |
ebnCosMapCpNameFully qualified network CP name for which the COS mapping
applies. SnaNAUWildcardName .1.3.6.1.4.1.727.7.2.1.34.7.1.4.1.1.1 |
ebnCosMapNonNativeCosThis object contains one of the following values:
- An 8-character COS name used in a non-native subnetwork.
- The single character '*', identifying the entry with the
default native COS for a non-native CP name. This entry
is used when there is no entry in the table for a
non-native CP name / non-native COS pair.
Because the characters allowed in an SNA COS name come from
a restricted character set, these names are not subject to
internationalization. DisplayString .1.3.6.1.4.1.727.7.2.1.34.7.1.4.1.1.2 |
ebnCosMapNativeCosAn 8-byte name for the class-of-service, as known in the
native subnetwork.
Because the characters allowed in an SNA COS name come from
a restricted character set, these names are not subject to
internationalization.ro DisplayString .1.3.6.1.4.1.727.7.2.1.34.7.1.4.1.1.3 |
ebnSubnetRoutingList OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.34.7.1.5 |
ebnSubnetSearchTableThis table contains one entry for each fully qualified LU
name for which an associated subnet routing list has been
defined. An entry in this table contains general
characteristics of the subnet search routing list for an
LU name. The routing list itself is represented by a set
of contiguous entries in the ebnSearchTable. SEQUENCE OF EbnSubnetSearchEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.5.1 |
ebnSubnetSearchEntryAn entry for the ebnSubnetSearchTable. The entry
represents the configured parameters the EBN uses when it
is determining how to search for the LU identified by the
ebnSubnetSearchLuName object. EbnSubnetSearchEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.5.1.1 |
ebnSubnetSearchLuNameFully qualified network LU name. SnaNAUWildcardName .1.3.6.1.4.1.727.7.2.1.34.7.1.5.1.1.1 |
ebnSubnetSearchDynamicsIndicates whether an EBN may add dynamic entries to a
subnetwork routing list. none(1) means no entries may be
added to the subnetwork routing list. limited(2) means
only likely entries may be added to the subnetwork routing
list. full(3) means all native extended border nodes and
adjacent, non-native EBNs and NNs will be added to the
subnetwork routing list.ro Enumeration .1.3.6.1.4.1.727.7.2.1.34.7.1.5.1.1.2 |
ebnSubnetSearchOrderingIndicates whether an EBN may reorder a subnetwork routing
list so that entries which are more likely to be successful
move to the top of the subnetwork routing list and entries
which are more likely to be unsuccessful move to the bottom
of the list.
The following values are defined:
- priority(1): Entries may be reordered.
- defined(2): Entries must not be reordered.ro Enumeration .1.3.6.1.4.1.727.7.2.1.34.7.1.5.1.1.3 |
ebnSearchTableThis table indicates the CONFIGURED list of control points
to which the EBN sends Locate searches for a given fully
qualified LU name. Each entry in the table indicates one
control point that should be included in a multi-subnet
search for a particular LU name. SEQUENCE OF EbnSearchEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.5.2 |
ebnSearchEntryAn entry in the ebnSearchTable. An entry can exist in
this table only if an entry exists in the
ebnSubnetSearchTable with an ebnSubnetSearchLuName value
matching this entry's ebnSearchLuName.
For a given ebnSearchLuName value, the ordering of entries
provides by the ebnSearchIndex values corresponds to the
order in which the control points to be searched appear in
the CONFIGURED search list for the ebnSearchLuName. EbnSearchEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.5.2.1 |
ebnSearchLuNameFully qualified network LU name. If this object has the
same value as the ebnSubnetSearchLuName object, then the
two objects are referring to the same LU. SnaNAUWildcardName .1.3.6.1.4.1.727.7.2.1.34.7.1.5.2.1.1 |
ebnSearchIndexSecondary index enumerating the CONFIGURED order in which
a search is forwarded to CPs for a particular LU name. The
order for an actual search is determined dynamically by the
EBN, based on this configured information and on other
factors, including whether search dynamics and search
ordering are enabled. Information on these last two settings
is available in, respectively, the ebnSubnetSearchDynamics
and ebnSubnetSearch ordering objects. Unsigned32 .1.3.6.1.4.1.727.7.2.1.34.7.1.5.2.1.2 |
ebnSearchCpNameThis object specifies the CP(s) to which a search should be
forwarded. It either follows the SnaNAUWildcardName textual
convention or takes one of the following special formats:
'*' indicates that all native EBNs and all adjacent non-
native EBNs and NNs may be added to the routing list
dynamically,
'*SELF' indicates that the EBN should search itself and
its native subnetwork at this time during the
cross-subnet search,
'*EBNS' indicates all native EBNs.
Because the characters allowed in a CP name come from a
restricted character set, and because the three formats
listed here use no special characters, this object is not
subject to internationalization.ro DisplayString .1.3.6.1.4.1.727.7.2.1.34.7.1.5.2.1.3 |
ebnSearchSNVCThe maximum number of subnets a Locate search procedure may
traverse.ro Unsigned32 .1.3.6.1.4.1.727.7.2.1.34.7.1.5.2.1.4 |
hbn OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.34.7.1.6 |
hbnIsInTableThe HBN Intermediate Session table. SEQUENCE OF HbnIsInEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.6.1 |
hbnIsInEntryEntry of the HBN Intermediate Session Table. An entry
exists in this table for every intermediate session being
routed between back-to-back RTP connections in the HBN.
When an entry for a session exists in this table, the
NceIds and Tcids for the back-to-back RTP connections are
made available in the following four objects:
RTP connection in the direction of the PLU:
- NceId: appnIsInRtpNceId (in the APPN MIB)
- Tcid: appnIsinRtpTcid (in the APPN MIB).
RTP connection in the direction of the SLU:
- NceId: hbnIsInRtpNceId (in this table)
- Tcid: hbnIsInRtpTcid (in this table). HbnIsInEntry .1.3.6.1.4.1.727.7.2.1.34.7.1.6.1.1 |
hbnIsInFqCpNameThe network-qualified control point name of the node at
which the session and PCID originated. For APPN and LEN
nodes, this is either the CP name of the APPN node at
which the origin LU is located or the CP name of the NN
serving the LEN node at which the origin LU is located.
If this object has the same value as the appnIsInFqCpName
object in the APPN MIB, then the two objects are referring
to the same APPN control point. SnaControlPointName (APPN-MIB) .1.3.6.1.4.1.727.7.2.1.34.7.1.6.1.1.1 |
hbnIsInPcidThe procedure correlation identifier (PCID) of a session.
It is an 8-octet value.
If this object has the same value as the appnIsInPcid object
in the APPN MIB, and if the corresponding hbnIsInFqCpName
object has the same value as the corresponding
appnIsInFqCpName object, then the entries indexed by these
objects are referring to the same session. OCTET STRING .1.3.6.1.4.1.727.7.2.1.34.7.1.6.1.1.2 |
hbnIsInRtpNceIdThe HPR local Network Connection Endpoint of the session in
the direction of the SLU.ro OCTET STRING .1.3.6.1.4.1.727.7.2.1.34.7.1.6.1.1.3 |
hbnIsInRtpTcidThe RTP connection local TCID of the session in the direction
of the SLU.ro OCTET STRING .1.3.6.1.4.1.727.7.2.1.34.7.1.6.1.1.4 |
ebnConformance OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.34.7.2 |
ebnCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.34.7.2.1 |
ebnGroups OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.34.7.2.2 |