E1-OPT-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
122
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
122 total| Object Name |
|---|
codex OBJECT IDENTIFIER .1.3.6.1.4.1.449 |
RFC1155-SMI Unknown .1.3.6.1.4.1.449 |
cdxProductSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.449.2 |
cdx6500 OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1 |
cdx6500Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2 |
cdx6500CfgProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1 |
cdx6500PCTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1 |
cdx6500PCTT1E1PortTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1.24 |
cdx6500PCTE1PortTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.2.1.1.24.2 |
cdx6500PPCTE1PortTableThis table contains the E1 (Physical) Port Configuration
parameters. SEQUENCE OF Cdx6500PPCTE1PortEntry .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1 |
cdx6500PPCTE1PortEntryA E1 Port Configuration Table Entry. Each entry contains the
configuration parameters for a single E1 port. Cdx6500PPCTE1PortEntry .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1 |
cdx6500E1CfgPortNumberPort number of the (physical) E1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.1 |
cdx6500E1CfgPortTypeThis is a digital port having interface type E1.
e1 :This is an E1 port.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.2 |
cdx6500E1CfgFormatSpecifies the format of the E1 interface.
channelize : DS0 definition fixed, predefined
by the telco or the user.
isdn : DS0 definition defined by the
ISDN D channel.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.3 |
cdx6500E1CfgLineFramingTypeIndicates the type of framing used by the
DS1 circuit -
e1CcsFebe : Common Channel Signaling with CRC & Si = FEBE.
e1CcsCrc : Common Channel Signaling with CRC & Si = 1.
e1Ccs : Common Channel Signaling with no CRC & Si = 1.
e1CasFebe : Channel Associated Signalling with Si = FEBE.
e1CasCrc : Channel Associated Signalling with CRC.
e1Cas : Channel Associated Signalling.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.4 |
cdx6500E1CfgLineCodingSelects the type of suppression used on the E1 link.
hdb3 : High Density Bipolar 3.
ami : Alternate Mark Inversion.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.5 |
cdx6500E1CfgLineImpedenceThis parameter indicates the line impedence.
li120 :The line impedence is 120 ohms.
li75 :The line impedence is 75 ohms.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.6 |
cdx6500E1CfgTransmitClockThis parameter selects the source of the transmit clock.
node : Node Timing (timing off another interface).
rec : Received Timing.
int : Internal Oscillator.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.7 |
cdx6500E1CfgThresholdValueLESThreshold value of Line Errored Seconds (LESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.8 |
cdx6500E1CfgThresholdValueLCVThreshold value of Line Code Violations (LCVs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.9 |
cdx6500E1CfgThresholdValuePCVThreshold value of Path Code Violations (PCVs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.10 |
cdx6500E1CfgThresholdValueCSSThreshold value of Controlled Slip Seconds (CSSs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.11 |
cdx6500E1CfgThresholdValueESThreshold value of Errored Seconds (ESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.12 |
cdx6500E1CfgThresholdValueBESThreshold value of Bursty Errored Seconds (BESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.13 |
cdx6500E1CfgThresholdValueSESThreshold value of Severely Errored Seconds (SESs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.14 |
cdx6500E1CfgThresholdValueSEFSThreshold value of Severely Errored Framing Seconds (SEFSs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.15 |
cdx6500E1CfgThresholdValueUASThreshold value of Unavailable Seconds (UASs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.16 |
cdx6500E1CfgThresholdValueDMThreshold value of Degraded Minutes (DMs)
to report alarms on CTP when exceeded.ro INTEGER .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.17 |
cdx6500E1CfgSwitchTypeThe ISDN switch type. This specifies the type of
equipment to which this span is connected.
The possible choices are:
att4ess : AT&T 4ESS Switch
att5ess : AT&T 5ESS Switch
ntDms100 : Northern Telecom DMS-100 Switch
ntDms250 : Northern Telecom DMS-250 Switch
md110Us : Ericsson MD-110 (North America)
md110 : Ericsson MD-110 (International)
siemens : Siemens EWSD Switch (U.S.)
ntt : Nippon Telephone and Telegraph switch (Japan)
general : Any Switch Type that conforms to CCITT standards
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.18 |
cdx6500E1CfgVariantSelect the ISDN Switch variant. This parameter
depends upon the switch type configured.
att : AT&T Custom
nt : Northern Telecom
isdn2 : Bellcore National ISDN-2
jate : JATE-compatible (Japan)
net5 : NET-5 standard (Europe)
oneTr6 : 1TR6 standard for PRI (Germany)
vn3 : VN3 standard (France)
ccitt : General CCITT Q.931 conformance
ts014 : AUSTEL TS014 standard (Australia)
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.19 |
cdx6500E1CfgUserNetworkSideThis parameter specifies whether the T1/E1 port
is emulating the network or user side of the ISDN network.
user : The T1 or E1 port is emulating the user,
ex. the T1 or E1 port is to be connected
to an ISDN network.
network : The T1 or E1 port is emulating the network,
ex. the T1 or E1 port is to be connected
to an ISDN PBX.
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.20 |
cdx6500E1CfgCallingIdMsbStateFor DMS100/250 switches, this parameter defines if the MSB
is set or clear in the Calling ID IE.
disabled : The MSB in the calling ID IE is cleared.
enabled : The MSB in the calling ID IE is set.
nc : Skipped during configurationro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.21 |
cdx6500E1BchannelNumberingThis parameter specifies the B-Channel numbering scheme
used by the ISDN service provider.
oneTo31 : B-Channels are numbered 1 to 31. B-Channel
16 is an invalid number in this scheme.
oneTo30 : B-Channels are numbered 1 to 30. B-Channel
31 isan invalid number in this scheme.
nc : Skipped during configuration.ro Enumeration .1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.22 |
cdx6500Statistics OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3 |
cdx6500StatProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1 |
cdx6500PSTPortProtocolGroup OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1 |
cdx6500PSTT1E1PortTable OBJECT IDENTIFIER .1.3.6.1.4.1.449.2.1.3.1.1.25 |
cdx6500PPSTE1PortTableThis table holds statistics information for E1 ports. SEQUENCE OF Cdx6500PPSTE1PortEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.2 |
cdx6500PPSTE1PortEntryEach entry contains statistics information for one E1 port. Cdx6500PPSTE1PortEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.2.1 |
cdx6500E1StatPortNumberPort number of the (physical) E1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.1 |
cdx6500E1StatTimeSinceLastResetTypeTime since last reset has happened for the port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.2 |
cdx6500E1StatPortTypeThe configured value of the Port Type.
e1 : This is a digital port with interface type E1.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.3 |
cdx6500E1StatInterfaceTypeThis parameter indicates the interface type of this port.
it120 : Interface type is 120 ohms.
it75 : Interface type is 75 ohms.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.4 |
cdx6500E1StatPortStateThe current port state :
disabled : The port has been disabled.
enabled : The port has been enabled.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.5 |
cdx6500E1StatAlarmStateThe alarm state of the port :
none : No alarm (normal).
rai : Remote Alarm Indication.
ais : Alarm Indication Signal.
los : Loss of Signal.
fas : Frame Alignment Signal (FAS) High Error Rate.
lof : Loss of Frame (LOF) Alignment.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.6 |
cdx6500E1BoardHWRevAndPartNumberHardware Revision and part number of the board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.7 |
cdx6500E1StatDailyHistoryTableThe E1 Daily History Table contains various statistics
collected over the previous 24 hours which are broken
into 96 completed 15 minute intervals. SEQUENCE OF Cdx6500E1StatDailyHistoryEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.4 |
cdx6500E1StatDailyHistoryEntryAn entry in the E1 Daily History Table. Cdx6500E1StatDailyHistoryEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1 |
cdx6500E1StatDailyHistoryIntervalThis gives the history at 15 minute intervals.Each
block represents a 15 minute interval of the day,
starting from 00:15 and ending at 24:00.Thus there
are 96 such blocks possible.Therefore,
1 represents the history at 00:15 .
2 represents the history at 00:30 .
..........
96 represents the history at 24:00 .ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.1 |
cdx6500E1StatDailyHistoryLESThe number of Line Errored Seconds (LESs)
encountered by the E1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.2 |
cdx6500E1StatDailyHistoryLCVThe number of Line Code Violations (LCVs)
encountered by the E1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.3 |
cdx6500E1StatDailyHistoryPCVThe number of Path Coding Violations (PCVs)
encountered by the E1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.4 |
cdx6500E1StatDailyHistoryCSSThe number of Controlled Slip Seconds (CSSs)
encountered by the E1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.5 |
cdx6500E1StatDailyHistoryESThe number of Errored Seconds (ESs)
encountered by the E1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.6 |
cdx6500E1StatDailyHistoryBESThe number of Bursty Errored Seconds (BESs)
encountered by the E1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.7 |
cdx6500E1StatDailyHistorySESThe number of Severely Errored Seconds (SESs)
encountered by the E1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.8 |
cdx6500E1StatDailyHistorySEFSThe number of Severely Errored Framing Seconds
(SEFSs) encountered by the E1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.9 |
cdx6500E1StatDailyHistoryUASThe number of Unavailable Seconds (UASs)
encountered by the E1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.10 |
cdx6500E1StatDailyHistoryDMThe number of Degraded Minutes (DMs)
encountered by the E1 interface in one of
the previous 96, individual 15 minute intervals.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.11 |
cdx6500E1StatDailyHistoryPortNumberThe port number of the E1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.12 |
cdx6500E1StatABCDStateTableThe ABCD State Table contains the current
TX / RX ABCD state of the Configured DS0 Channels. SEQUENCE OF Cdx6500E1StatABCDStateEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.6 |
cdx6500E1StatABCDStateEntryAn entry in the ABCD State Table. Cdx6500E1StatABCDStateEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.6.1 |
cdx6500E1StatABCDStateDS0ChannelNumberChannel number of the configured DS0 channel.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.6.1.1 |
cdx6500E1StatABCDStateCurrentTxStateCurrent TX ABCD state of the configured DS0 channels. This
object is no longer supported.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.6.1.2 |
cdx6500E1StatABCDStateCurrentRxStateCurrent RX ABCD state of the configured DS0 channels.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.6.1.3 |
cdx6500E1StatABCDStatePortNumberPort number of the E1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.6.1.4 |
cdx6500E1ISDNStatusTableThis table holds ISDN statistics information for E1 ports. SEQUENCE OF Cdx6500E1StatISDNStatusEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.8 |
cdx6500E1StatISDNStatusEntryEach entry contains statistics information for one E1 port. Cdx6500E1StatISDNStatusEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1 |
cdx6500E1StatISDNStatusPortNumberThe port number of the E1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.1 |
cdx6500E1StatNumRxCallsSinceLastResetThe number of inbound calls that were attempted
since the last statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.2 |
cdx6500E1StatNumRxCallsRejectedThe number of inbound calls that were rejected
since the last statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.3 |
cdx6500E1StatRxLastCallFailureCauseThe reason the last inbound call was rejected,
since the last statistics reset.
The posssible values are:
noFailureReported : No call failure
noAvailableVirtualPort : No Virtual Port available
securityViolation : Password/Calling ID security failed
noResourcesAvailable : No resources available
callRejected : Call failed by Xircom card
invalidPhoneNumber : Incorrect phone number
outgoingCallRequestTimeout : Outgoing call request timed out
callCollision : A call collision occurred
virtualPortNotAvailable : Virtual port not available
invalidConfiguration : Invalid configuration
na : Value not availablero Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.4 |
cdx6500E1StatRxLastCalledNumberThe phone number of the virtual port of the last ISDN
call made into this node.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.5 |
cdx6500E1StatRxLastCallingNumberThe phone number of last party to make an ISDN
call into this node.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.6 |
cdx6500E1StatRxMinCallDurationThe minimum call duration of all inbound ISDN calls made
into this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.7 |
cdx6500E1StatRxMaxCallDurationThe maximum call duration of all inbound ISDN calls made
into this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.8 |
cdx6500E1StatRxAvgCallDurationThe average call duration of all inbound ISDN calls made
into this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.9 |
cdx6500E1StatNumTxCallsSinceLastResetThe number of outbound calls that were attempted
since the last statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.10 |
cdx6500E1StatNumTxCallsRejectedThe number of outbound calls that were rejected
since the last statistics reset.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.11 |
cdx6500E1StatTxLastCallFailureCauseThe reason the last outbound call was rejected,
since the last statistics reset.
The posssible values are:
noFailureReported : No call failure.
noAvailableVirtualPort : No Virtual Port available.
securityViolation : Password/Calling ID security
failed.
noResourcesAvailable : No resources available.
callRejected : Call failed by Xircom card.
invalidPhoneNumber : Incorrect phone number.
outgoingCallRequestTimeout : Outgoing call request timed out.
callCollision : A call collision occurred.
virtualPortNotAvailable : Virtual port not available.
invalidConfiguration : Invalid configuration.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.12 |
cdx6500E1StatTxLastCalledNumberThe phone number of the last ISDN call made by a virtual
port from this node.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.13 |
cdx6500E1StatTxLastCallingNumberThe phone number of the virtual port that made the last
ISDN call from this node.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.14 |
cdx6500E1StatTxMinCallDurationThe minimum call duration of all outbound ISDN calls made
from this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.15 |
cdx6500E1StatTxMaxCallDurationThe maximum call duration of all outbound ISDN calls made
from this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.16 |
cdx6500E1StatTxAvgCallDurationThe average call duration of all outbound ISDN calls made
from this node, since the last statistics reset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.17 |
cdx6500E1StatDchannelStateSpecifies the status of the D Channel.
up : The D Channel is up.
down : The D Channel is down.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.18 |
cdx6500E1StatISDNCallSummaryTableThis table holds ISDN call summary information for E1 ports. SEQUENCE OF Cdx6500E1StatISDNCallSummaryEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.10 |
cdx6500E1StatISDNCallSummaryEntryAn entry in the ISDN call summary table. Cdx6500E1StatISDNCallSummaryEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.10.1 |
cdx6500E1StatISDNBChannelNumberB-Channel number of the ISDN Channel.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.1 |
cdx6500E1StatISDNBChannelStatusStatus of the ISDN B-Channel.
The posssible values are:
idle : The B-Channel is in the idle state.
ringing : The B-Channel is in the ringing state.
connected : The B-Channel is in the connected state.
outOfService : The B-Channel is out of service.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.2 |
cdx6500E1StatISDNCallDirectionDirection of the ISDN call on the B-Channel.
The posssible values are:
inbound : The current call is in the inbound direction.
outbound : The current call is in the outbound direction.
invalid : There is no call present.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.3 |
cdx6500E1StatISDNCallingNumberThis is the phone number of the party originating the
ISDN call.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.4 |
cdx6500E1StatISDNCalledNumberThis is the phone number of the party at the destination
end of the ISDN call.ro DisplayString .1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.5 |
cdx6500E1StatISDNDS0RateDS0 Rate of the ISDN B-Channel.
The posssible values are:
ds056k : The DS0 Rate is 56K.
ds064k : The DS0 Rate is 64K.
na : Value not available.ro Enumeration .1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.6 |
cdx6500E1StatISDNVirtualPortNumberVirtual Port Number of the port using this B-Channel.
A value of 0 implies that no virtual port is
currently using the B-Channel.ro INTEGER .1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.7 |
cdx6500E1StatISDNTimeCallStartedThis is the duration that the current call on this
B-Channel has been connected.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.8 |
cdx6500E1StatISDNPortNumberPort number of the E1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.9 |
cdx6500E1StatLast24HoursReportTableThis table holds a report of the cumulative sum
of the statistics for the previous 24 hour interval. SEQUENCE OF Cdx6500E1StatLast24HoursReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.12 |
cdx6500E1StatLast24HoursReportEntryEach entry contains statistics information for one E1 port. Cdx6500E1StatLast24HoursReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1 |
cdx6500E1StatLast24HoursReportPortNumberPort number of the E1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.1 |
cdx6500E1StatLast24HoursReportLESThe number of Line Errored Seconds (LESs) encountered
by the E1 interface in the previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.2 |
cdx6500E1StatLast24HoursReportLCVThe number of Line Code Violations (LCVs) encountered
by the E1 interface in the previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.3 |
cdx6500E1StatLast24HoursReportPCVThe number of Path Coding Violations (PCVs) encountered
by the E1 interface in the previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.4 |
cdx6500E1StatLast24HoursReportCSSThe number of Controlled Slip Seconds (CSSs) encountered
by the E1 interface in the previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.5 |
cdx6500E1StatLast24HoursReportESThe number of Errored Seconds (ESs) encountered by
the E1 interface in the previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.6 |
cdx6500E1StatLast24HoursReportBESThe number of Bursty Errored Seconds (BESs) encountered
by the E1 interface in the previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.7 |
cdx6500E1StatLast24HoursReportSESThe number of Severely Errored Seconds (SESs) encountered
by the E1 interface in the previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.8 |
cdx6500E1StatLast24HoursReportSEFSThe number of Severely Errored Framing Seconds (SEFSs)
encountered by the E1 interface in the previous
24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.9 |
cdx6500E1StatLast24HoursReportUASThe number of Unavailable Seconds (UASs) encountered
by the E1 interface in the previous 24 hour interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.10 |
cdx6500E1StatCurrent15MinutesReportTableThis table holds a report of the statistics for the
current 15 minutes interval. SEQUENCE OF Cdx6500E1StatCurrent15MinutesReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.14 |
cdx6500E1StatCurrent15MinutesReportEntryEach entry contains statistics information for one E1 port. Cdx6500E1StatCurrent15MinutesReportEntry .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1 |
cdx6500E1StatCurrent15MinutesReportPortNumberPort number of the E1 port.ro PhysicalPortNumber .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.1 |
cdx6500E1StatCurrent15MinutesReportTimeElapsedThe time that has elapsed since the beginning
of the current 15 minutes interval.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.2 |
cdx6500E1StatCurrent15MinutesReportLESThe number of Line Errored Seconds (LESs) encountered
by the E1 interface in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.3 |
cdx6500E1StatCurrent15MinutesReportLCVThe number of Line Code Violations (LCVs) encountered
by the E1 interface in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.4 |
cdx6500E1StatCurrent15MinutesReportPCVThe number of Path Coding Violations (PCVs) encountered
by the E1 interface in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.5 |
cdx6500E1StatCurrent15MinutesReportCSSThe number of Controlled Slip Seconds (CSSs) encountered
by the E1 interface in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.6 |
cdx6500E1StatCurrent15MinutesReportESThe number of Errored Seconds (ESs) encountered by the
E1 interface in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.7 |
cdx6500E1StatCurrent15MinutesReportBESThe number of Bursty Errored Seconds (BESs) encountered
by the E1 interface in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.8 |
cdx6500E1StatCurrent15MinutesReportSESThe number of Severely Errored Seconds (SESs) encountered
by the E1 interface in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.9 |
cdx6500E1StatCurrent15MinutesReportSEFSThe number of Severely Errored Framing Seconds (SEFSs)
encountered by the E1 interface in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.10 |
cdx6500E1StatCurrent15MinutesReportUASThe number of Unavailable Seconds (UASs) encountered
by the E1 interface in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.11 |