Dlink-ERRDISABLE-RECOVERY-MIB
The Dlink-ERRDISABLE-RECOVERY-MIB enables monitoring and configuration of automatic recovery timers for switch ports placed in an errdisable state on D-Link network equipment. It facilitates the management of specific recovery intervals and trigger conditions to restore port connectivity following error events such as loop detection, BPDU guard violations, or port security breaches.
Imported Objects
Objects
10 total| Object Name |
|---|
rlErrdisableRecoveryThe private MIB module definition for Errdisable Recovery MIB. MODULE-IDENTITY .1.3.6.1.4.1.171.10.94.89.89.128 |
rlErrdisableRecoveryIntervalTimeout interval in seconds for automatic activation of an interface after shutdown.rw INTEGER .1.3.6.1.4.1.171.10.94.89.89.128.1 |
rlErrdisableRecoveryCauseTableThe table is used to enable or disable auto-recovery for specific application causes port suspend. The table includes entries for all applications. SEQUENCE OF RlErrdisableRecoveryCauseEntry .1.3.6.1.4.1.171.10.94.89.89.128.2 |
rlErrdisableRecoveryCauseEntryAn entry (conceptual row) in the rlErrdisableRecoveryCauseEntry. RlErrdisableRecoveryCauseEntry .1.3.6.1.4.1.171.10.94.89.89.128.2.1 |
rlErrdisableRecoveryCauseType of recovery cause. RlErrdisableRecoveryCauseType .1.3.6.1.4.1.171.10.94.89.89.128.2.1.1 |
rlErrdisableRecoveryEnableEnable/Disable automatic recovery.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.128.2.1.2 |
rlErrdisableRecoveryIfTableThe table is used for show the reason of shutdown the port in errdisable state. The table includes only suspended interfaces. SEQUENCE OF RlErrdisableRecoveryIfEntry .1.3.6.1.4.1.171.10.94.89.89.128.3 |
rlErrdisableRecoveryIfEntryAn entry (conceptual row) in the rlErrdisableRecoveryIfEntry. RlErrdisableRecoveryIfEntry .1.3.6.1.4.1.171.10.94.89.89.128.3.1 |
rlErrdisableRecoveryIfReasonThe reason of shutdown the port in errdisable state.ro RlErrdisableRecoveryCauseType .1.3.6.1.4.1.171.10.94.89.89.128.3.1.1 |
rlErrdisableRecoveryIfEnableEnable/Disable automatic recovery status.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.10.94.89.89.128.3.1.2 |
More MIBs from D-Link
Browse all D-LinkMIBs →SNMP MIB module
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
SNMP MIB module
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.