DVMRP-STD-MIB
The MIB module for management of DVMRP routers.
Main OID:
dvmrpStdMIB.1.3.6.1.3.62
68
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
dvmrpStdMIBThe MIB module for management of DVMRP routers. MODULE-IDENTITY .1.3.6.1.3.62 |
dvmrpMIBObjects OBJECT IDENTIFIER .1.3.6.1.3.62.1 |
dvmrp OBJECT IDENTIFIER .1.3.6.1.3.62.1.1 |
dvmrpScalar OBJECT IDENTIFIER .1.3.6.1.3.62.1.1.1 |
dvmrpVersionStringThe router's DVMRP version information. Similar to sysDescr in MIB-II, this is a free-form field which can be used to display vendor-specific information.ro DisplayString (SNMPv2-TC) .1.3.6.1.3.62.1.1.1.1 |
dvmrpNumRoutesThe number of entries in the routing table. This can be used to monitor the routing table size.ro Gauge32 .1.3.6.1.3.62.1.1.1.3 |
dvmrpReachableRoutesThe number of entries in the routing table with non infinite metrics. This can be used to detect network partitions by observing the ratio of reachable routes to total routes.ro Gauge32 .1.3.6.1.3.62.1.1.1.4 |
dvmrpInterfaceTableThe (conceptual) table listing the router's multicast- capable interfaces. SEQUENCE OF DvmrpInterfaceEntry .1.3.6.1.3.62.1.1.2 |
dvmrpInterfaceEntryAn entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides. DvmrpInterfaceEntry .1.3.6.1.3.62.1.1.2.1 |
dvmrpInterfaceIndexThe ifIndex value of the interface for which DVMRP is enabled. InterfaceIndex (IF-MIB) .1.3.6.1.3.62.1.1.2.1.1 |
dvmrpInterfaceLocalAddressThe IP address this system will use as a source address on this interface. On unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress for some interface on the system.rw IpAddress .1.3.6.1.3.62.1.1.2.1.2 |
dvmrpInterfaceMetricThe distance metric for this interface which is used to calculate distance vectors.rw Integer32 .1.3.6.1.3.62.1.1.2.1.3 |
dvmrpInterfaceStatusThe status of this entry. Creating the entry enables DVMRP on the virtual interface; destroying the entry or setting it to notInService disables DVMRP on the virtual interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.62.1.1.2.1.4 |
dvmrpInterfaceRcvBadPktsThe number of DVMRP messages received on the interface by the DVMRP process which were subsequently discarded as invalid (e.g. invalid packet format, or a route report from an unknown neighbor).ro Counter32 .1.3.6.1.3.62.1.1.2.1.5 |
dvmrpInterfaceRcvBadRoutesThe number of routes, in valid DVMRP packets, which were ignored because the entry was invalid.ro Counter32 .1.3.6.1.3.62.1.1.2.1.6 |
dvmrpInterfaceSentRoutesThe number of routes, in DVMRP Report packets, which have been sent on this interface. Together with dvmrpNeighborRcvRoutes at a peer, this object is useful for detecting routes being lost.ro Counter32 .1.3.6.1.3.62.1.1.2.1.7 |
dvmrpInterfaceKeyThe (shared) key for authenticating neighbors on this interface. This object is intended solely for the purpose of setting the interface key, and MUST be accessible only via requests using both authentication and privacy. The agent MAY report an empty string in response to get, get- next, get-bulk requests.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.3.62.1.1.2.1.8 |
dvmrpInterfaceKeyVersionThe highest version number of all known interface keys for this interface used for authenticating neighbors.rw Integer32 .1.3.6.1.3.62.1.1.2.1.9 |
dvmrpInterfaceGenerationIdThe generation identifier for the interface. This is used by neighboring routers to detect whether the DVMRP routing table should be resent.ro Integer32 .1.3.6.1.3.62.1.1.2.1.10 |
dvmrpNeighborTableThe (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving DVMRP messages. SEQUENCE OF DvmrpNeighborEntry .1.3.6.1.3.62.1.1.3 |
dvmrpNeighborEntryAn entry (conceptual row) in the dvmrpNeighborTable. DvmrpNeighborEntry .1.3.6.1.3.62.1.1.3.1 |
dvmrpNeighborIfIndexThe value of ifIndex for the virtual interface used to reach this DVMRP neighbor. InterfaceIndex (IF-MIB) .1.3.6.1.3.62.1.1.3.1.1 |
dvmrpNeighborAddressThe IP address of the DVMRP neighbor for which this entry contains information. IpAddress .1.3.6.1.3.62.1.1.3.1.2 |
dvmrpNeighborUpTimeThe time since this DVMRP neighbor (last) became a neighbor of the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.62.1.1.3.1.3 |
dvmrpNeighborExpiryTimeThe minimum time remaining before this DVMRP neighbor will be aged out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.62.1.1.3.1.4 |
dvmrpNeighborGenerationIdThe neighboring router's generation identifier.ro Integer32 .1.3.6.1.3.62.1.1.3.1.5 |
dvmrpNeighborMajorVersionThe neighboring router's major DVMRP version number.ro Integer32 .1.3.6.1.3.62.1.1.3.1.6 |
dvmrpNeighborMinorVersionThe neighboring router's minor DVMRP version number.ro Integer32 .1.3.6.1.3.62.1.1.3.1.7 |
dvmrpNeighborCapabilitiesThis object describes the neighboring router's capabilities. The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indicates that the neighbor supports pruning. The generationID bit indicates that the neighbor sends its generationID in Probe messages. The mtrace bit indicates that the neighbor can handle mtrace requests.ro Bits .1.3.6.1.3.62.1.1.3.1.8 |
dvmrpNeighborRcvRoutesThe total number of routes received in valid DVMRP packets received from this neighbor. This can be used to diagnose problems such as unicast route injection, as well as giving an indication of the level of DVMRP route exchange activity.ro Counter32 .1.3.6.1.3.62.1.1.3.1.9 |
dvmrpNeighborRcvBadPktsThe number of packet received from this neighbor which were discarded as invalid.ro Counter32 .1.3.6.1.3.62.1.1.3.1.10 |
dvmrpNeighborRcvBadRoutesThe number of routes, in valid DVMRP packets received from this neighbor, which were ignored because the entry was invalid.ro Counter32 .1.3.6.1.3.62.1.1.3.1.11 |
dvmrpNeighborStateState of the neighbor adjacency.ro Enumeration .1.3.6.1.3.62.1.1.3.1.12 |
dvmrpRouteTableThe table of routes learned through DVMRP route exchange. SEQUENCE OF DvmrpRouteEntry .1.3.6.1.3.62.1.1.4 |
dvmrpRouteEntryAn entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information. DvmrpRouteEntry .1.3.6.1.3.62.1.1.4.1 |
dvmrpRouteSourceThe network address which when combined with the corresponding value of dvmrpRouteSourceMask identifies the sources for which this entry contains multicast routing information. IpAddress .1.3.6.1.3.62.1.1.4.1.1 |
dvmrpRouteSourceMaskThe network mask which when combined with the corresponding value of dvmrpRouteSource identifies the sources for which this entry contains multicast routing information. IpAddress .1.3.6.1.3.62.1.1.4.1.2 |
dvmrpRouteUpstreamNeighborThe address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received.ro IpAddress .1.3.6.1.3.62.1.1.4.1.3 |
dvmrpRouteIfIndexThe value of ifIndex for the interface on which IP datagrams sent by these sources are received. A value of 0 typically means the route is an aggregate for which no next- hop interface exists.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.3.62.1.1.4.1.4 |
dvmrpRouteMetricThe distance in hops to the source subnet.ro Integer32 .1.3.6.1.3.62.1.1.4.1.5 |
dvmrpRouteExpiryTimeThe minimum amount of time remaining before this entry will be aged out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.62.1.1.4.1.6 |
dvmrpRouteUpTimeThe time since the route represented by this entry was learned by the router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.62.1.1.4.1.7 |
dvmrpRouteNextHopTableThe (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. SEQUENCE OF DvmrpRouteNextHopEntry .1.3.6.1.3.62.1.1.5 |
dvmrpRouteNextHopEntryAn entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed. DvmrpRouteNextHopEntry .1.3.6.1.3.62.1.1.5.1 |
dvmrpRouteNextHopSourceThe network address which when combined with the corresponding value of dvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a next hop on an outgoing interface. IpAddress .1.3.6.1.3.62.1.1.5.1.1 |
dvmrpRouteNextHopSourceMaskThe network mask which when combined with the corresponding value of dvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop on an outgoing interface. IpAddress .1.3.6.1.3.62.1.1.5.1.2 |
dvmrpRouteNextHopIfIndexThe ifIndex value of the interface for the outgoing interface for this next hop. InterfaceIndex (IF-MIB) .1.3.6.1.3.62.1.1.5.1.3 |
dvmrpRouteNextHopTypeType is leaf if no downstream dependent neighbors exist on the outgoing virtual interface. Otherwise, type is branch.ro Enumeration .1.3.6.1.3.62.1.1.5.1.4 |
dvmrpPruneTableThe (conceptual) table listing the router's upstream prune state. SEQUENCE OF DvmrpPruneEntry .1.3.6.1.3.62.1.1.6 |
dvmrpPruneEntryAn entry (conceptual row) in the dvmrpPruneTable. DvmrpPruneEntry .1.3.6.1.3.62.1.1.6.1 |
dvmrpPruneGroupThe group address which has been pruned. IpAddress .1.3.6.1.3.62.1.1.6.1.1 |
dvmrpPruneSourceThe address of the source or source network which has been pruned. IpAddress .1.3.6.1.3.62.1.1.6.1.2 |
dvmrpPruneSourceMaskThe address of the source or source network which has been pruned. The mask must either be all 1's, or else dvmrpPruneSource and dvmrpPruneSourceMask must match dvmrpRouteSource and dvmrpRouteSourceMask for some entry in the dvmrpRouteTable. IpAddress .1.3.6.1.3.62.1.1.6.1.3 |
dvmrpPruneExpiryTimeThe amount of time remaining before this prune should expire at the upstream neighbor. This value should be the minimum of the default prune lifetime and the remaining prune lifetimes of the local router's downstream neighbors, if any.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.3.62.1.1.6.1.4 |
dvmrpTraps OBJECT IDENTIFIER .1.3.6.1.3.62.1.1.7 |
dvmrpNeighborLossA dvmrpNeighborLoss trap signifies the loss of a 2-way adjacency with a neighbor. This trap should be generated when the neighbor state changes from active to one-way, ignoring, or down. The trap should be generated only if the router has no other neighbors on the same interface with a lower IP address than itself. NOTIFICATION-TYPE .1.3.6.1.3.62.1.1.7.1 |
dvmrpNeighborNotPruningA dvmrpNeighborNotPruning trap signifies that a non-pruning neighbor has been detected (in an implementation-dependent manner). This trap should be generated at most once per generation ID of the neighbor. For example, it should be generated at the time a neighbor is first heard from if the prune bit is not set in its capabilities. It should also be generated if the local system has the ability to tell that a neighbor which sets the the prune bit in its capabilities is not pruning any branches over an extended period of time. The trap should be generated only if the router has no other neighbors on the same interface with a lower IP address than itself. NOTIFICATION-TYPE .1.3.6.1.3.62.1.1.7.2 |
dvmrpMIBConformance OBJECT IDENTIFIER .1.3.6.1.3.62.2 |
dvmrpMIBCompliances OBJECT IDENTIFIER .1.3.6.1.3.62.2.1 |
dvmrpMIBComplianceThe compliance statement for the DVMRP MIB. Unknown .1.3.6.1.3.62.2.1.1 |
dvmrpMIBGroups OBJECT IDENTIFIER .1.3.6.1.3.62.2.2 |
dvmrpGeneralGroupA collection of objects used to describe general DVMRP configuration information. Unknown .1.3.6.1.3.62.2.2.2 |
dvmrpInterfaceGroupA collection of objects used to describe DVMRP interface configuration and statistics. Unknown .1.3.6.1.3.62.2.2.3 |
dvmrpNeighborGroupA collection of objects used to describe DVMRP peer configuration and statistics. Unknown .1.3.6.1.3.62.2.2.4 |
dvmrpRoutingGroupA collection of objects used to store the DVMRP routing table. Unknown .1.3.6.1.3.62.2.2.5 |
dvmrpSecurityGroupA collection of objects used to store information related to DVMRP security. Unknown .1.3.6.1.3.62.2.2.6 |
dvmrpTreeGroupA collection of objects used to store information related to DVMRP prune state. Unknown .1.3.6.1.3.62.2.2.7 |
dvmrpNotificationGroupA collection of notifications for signaling important DVMRP events. Unknown .1.3.6.1.3.62.2.2.8 |