Home/Catalog/DVB-RCS-MIB

DVB-RCS-MIB

DVB-RCS MIB subtree. This MIB module applies to equipment that is a Return Channel Satellite Terminal (RCST), defined in the Digital Video Broadcasting Return Channel via Satellite system (DVB-RCS) standard (ETSI EN 301 790 Digital Video Broadcasting (DVB); Interaction Channel for Satellite Distribution Systems, European Telecommunications Standards Institute (ETSI)). It defines a set of MIB objects to characterize the behavior and performance of network-layer entities implementing DVB-RCS. This MIB module is intended to be used by DVB-RCS equipment following the SatLabs System Recommendations, defined by the SatLabs Group and available at www.satlabs.org. Note that, if not stated otherwise in the object DESCRIPTION clause, all writable objects are persistent. Copyright (C) The IETF Trust (2010). This version of this MIB module is part of RFC 5728; see the RFC itself for full legal notices.
Main OID:
dvbRcsMib.1.3.6.1.2.1.10.239
217
Objects
Active
Status
7
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
SNMPv2-CONF
SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB
URI-TC-MIB
DIFFSERV-DSCP-TC

Objects

217 total
Object Name
dvbRcsMibDVB-RCS MIB subtree. This MIB module applies to equipment that is a Return Channel Satellite Terminal (RCST), defined in the Digital Video Broadcasting Return Channel via Satellite system (DVB-RCS) standard (ETSI EN 301 790 Digital Video Broadcasting (DVB); Interaction Channel for Satellite Distribution Systems, European Telecommunications Standards Institute (ETSI)). It defines a set of MIB objects to characterize the behavior and performance of network-layer entities implementing DVB-RCS. This MIB module is intended to be used by DVB-RCS equipment following the SatLabs System Recommendations, defined by the SatLabs Group and available at www.satlabs.org. Note that, if not stated otherwise in the object DESCRIPTION clause, all writable objects are persistent. Copyright (C) The IETF Trust (2010). This version of this MIB module is part of RFC 5728; see the RFC itself for full legal notices.
MODULE-IDENTITY
.1.3.6.1.2.1.10.239
dvbRcsMibObjects
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1
dvbRcsRcst
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1
dvbRcsRcstSystem
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.1
dvbRcsSystemMibRevisionThis object allows the SNMP agent to report the implemented MIB module revision. The supported REVISION of this module is reported.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.1.1
dvbRcsSystemSatLabsProfilesDeclarationIndicates the SatLabs profiles supported, as defined in the SatLabs System Recommendations.ro
DvbRcsSatLabsProfileMap
.1.3.6.1.2.1.10.239.1.1.1.2
dvbRcsSystemSatLabsOptionsDeclarationIndicates the SatLabs options supported, as defined in the SatLabs System Recommendations.ro
DvbRcsSatLabsOptionMap
.1.3.6.1.2.1.10.239.1.1.1.3
dvbRcsSystemSatLabsFeaturesDeclarationIndicates the optional compatibility features and minor options supported, as defined in the SatLabs System Recommendations.ro
DvbRcsSatLabsFeatureMap
.1.3.6.1.2.1.10.239.1.1.1.4
dvbRcsSystemLocationPhysical location of the ODU antenna expressed as longitude, latitude, and altitude. The string shall have 31 characters in the following format: <xxxx.xxx>,<a>,<yyyyy.yyy>,<b>,<zzzz.z>,M where x, y and z represents digits, a=N or S, b=E or W, Reading the digits from left to right: 'x' 7 latitude digits; x digits 1-2 contain the degrees, x digits 3-7 contain the minutes in decimal; 'y' 8 longitude digits; y digits 1-3 contain the degrees, y digits 4-8 contain the minutes in decimal; 'z' 5 altitude digits; meters above sea level in decimal; '.' is the decimal point; ',' is the field separator; 'M' is the indicator for altitude meters. This format is a modified subset of the NMEA 0183 (National Marine Electronics Association, Interface Standard) format for Global Positioning System Fix Data. This location and the satellite position are used to calculate the RCST-satellite path delay. Note: The system.sysLocation object of MIB-II provides physical location of the IDU unit.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.1.5
dvbRcsSystemOduAntennaSizeDiameter of the antenna.rw
Unsigned32 UNITS "cm"
.1.3.6.1.2.1.10.239.1.1.1.6
dvbRcsSystemOduAntennaGainAntenna peak gain of the ODU.rw
Unsigned32 UNITS "x0.1 dBi"
.1.3.6.1.2.1.10.239.1.1.1.7
dvbRcsSystemOduSspaPower level of the Solid State Power Amplifier installed in the ODU.rw
Unsigned32 UNITS "x0.1 W"
.1.3.6.1.2.1.10.239.1.1.1.8
dvbRcsSystemOduTxTypeType of transmitter installed in the ODU.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.1.9
dvbRcsSystemOduRxTypeType of LNB installed in the ODU, with information such as vendor type, output type (single, twin, quad,...), etc.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.1.10
dvbRcsSystemOduRxBandLNB High Band / Low Band selector. High Band corresponds to the emission of an 18-26 kHz tone with 0.4-0.8 Vpp in the Rx IFL cable: (0) - High Band (1) - Low Bandrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.1.11
dvbRcsSystemOduRxLOFrequency of LNB Local Oscillator (in 100 Hz)rw
Unsigned32 UNITS "x100 Hz"
.1.3.6.1.2.1.10.239.1.1.1.12
dvbRcsSystemOduTxLOFrequency of Block Up-Converter Local Oscillator (in 100 Hz).rw
Unsigned32 UNITS "x100 Hz"
.1.3.6.1.2.1.10.239.1.1.1.13
dvbRcsSystemIduPep
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.1.14
dvbRcsTcpPepStatus and control of embedded TCP PEP. 0 - disabled or not implemented 1 - enabledrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.1.14.1
dvbRcsHttpPepStatus and control of embedded HTTP PEP. 0 - disabled or not implemented 1 - enabledrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.1.14.2
dvbRcsOduTx
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.1.15
dvbRcsOduTxTypeTableThis table contains the identification of each well- known BUC type supported by the IDU and provides its associated index.
SEQUENCE OF DvbRcsOduTxTypeEntry
.1.3.6.1.2.1.10.239.1.1.1.15.1
dvbRcsOduTxTypeEntryAn entry in the BUC type table.
DvbRcsOduTxTypeEntry
.1.3.6.1.2.1.10.239.1.1.1.15.1.1
dvbRcsOduTxTypeIndexIndex for the BUC type.
Unsigned32
.1.3.6.1.2.1.10.239.1.1.1.15.1.1.1
dvbRcsOduTxTypeDescriptionText-based identification of a BUC type.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.1.15.1.1.2
dvbRcsOduTxTypeIndex of the selected BUC type.rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.1.15.2
dvbRcsOduRx
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.1.16
dvbRcsOduRxTypeTableThis table contains the identification of each well- known LNB type supported by the IDU and provides its associated index.
SEQUENCE OF DvbRcsOduRxTypeEntry
.1.3.6.1.2.1.10.239.1.1.1.16.1
dvbRcsOduRxTypeEntryAn entry in the LNB type table.
DvbRcsOduRxTypeEntry
.1.3.6.1.2.1.10.239.1.1.1.16.1.1
dvbRcsOduRxTypeIndexIndex for the LNB type.
Unsigned32
.1.3.6.1.2.1.10.239.1.1.1.16.1.1.1
dvbRcsOduRxTypeDescriptionText-based identification of an LNB type.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.1.16.1.1.2
dvbRcsOduRxTypeIndex of the selected LNB type.rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.1.16.2
dvbRcsOduAntenna
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.1.17
dvbRcsOduAntennaTypeTableThis table contains the identification of each well- known antenna type supported by the IDU and provides its associated index.
SEQUENCE OF DvbRcsOduAntennaTypeEntry
.1.3.6.1.2.1.10.239.1.1.1.17.1
dvbRcsOduAntennaTypeEntryAn entry in the antenna type table.
DvbRcsOduAntennaTypeEntry
.1.3.6.1.2.1.10.239.1.1.1.17.1.1
dvbRcsOduAntennaTypeIndexIndex for the antenna type.
Unsigned32
.1.3.6.1.2.1.10.239.1.1.1.17.1.1.1
dvbRcsOduAntennaTypeDescriptionText-based identification of an antenna type.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.1.17.1.1.2
dvbRcsOduAntennaTypeIndex of the selected antenna type.rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.1.17.2
dvbRcsRcstNetwork
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.2
dvbRcsNetworkOamInetAddressTypeThe type of Internet address of dvbRcsNetworkOamInetAddress. If the terminal OAM Internet address is unassigned or unknown, then the value of this object is unknown(0).rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.1
dvbRcsNetworkOamInetAddressOAM IP Address of the RCST. This object is used with both IP and interfaces MIB-II subgroups. It uniquely determines the interface through which OAM traffic passes. The OAM IP address may be statically or dynamically assigned. It is system dependent whether the OAM IP address and the Traffic IP address are the same address. If the terminal has no OAM Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkOamInetAddressType object.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.2
dvbRcsNetworkOamInetAddressPrefixLengthPrefix length for the OAM IP Address. If this address prefix is unknown or does not apply, the value is zero.rw
InetAddressPrefixLength (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.3
dvbRcsNetworkOamInetAddressAssignIdentifies whether the OAM IP address is statically (1) or dynamically (2) assigned.rw
Enumeration
.1.3.6.1.2.1.10.239.1.1.2.4
dvbRcsNetworkLanInetAddressTypeThe type of Internet address of dvbRcsNetworkLanInetAddress. If the terminal Internet address on the LAN interface is unassigned or unknown, then the value of this object is unknown(0).rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.5
dvbRcsNetworkLanInetAddressIP address of the LAN interface of the terminal. If the terminal has no Internet address assigned on the LAN interface or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkLanInetAddressType object.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.6
dvbRcsNetworkLanInetAddressPrefixLengthPrefix length for the LAN IP Address of the terminal. If this address prefix is unknown or does not apply, the value is zero.rw
InetAddressPrefixLength (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.7
dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressTypeThe type of Internet address of dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress. If the default gateway Internet address is unassigned or unknown, then the value of this object is unknown(0).rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.8
dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressIP address of the default gateway for the air interface. If the terminal has no default gateway assigned on the air interface or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType object.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.9
dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressPrefixLengthPrefix length for the IP address of the default gateway for the air interface. If this address prefix is unknown or does not apply, the value is zero.rw
InetAddressPrefixLength (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.10
dvbRcsNetworkDnsServers
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.2.11
dvbRcsPrimaryDnsServerInetAddressTypeThe type of Internet address of dvbRcsPrimaryDnsServerInetAddress. If the primary DNS server Internet address is unassigned or unknown, then the value of this object is unknown(0).rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.11.1
dvbRcsPrimaryDnsServerInetAddressIP address of the primary DNS server in the NCC. If the terminal has no primary DNS server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPrimaryDnsServerInetAddressType object.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.11.2
dvbRcsPrimaryDnsServerInetAddressPrefixLengthPrefix length for the IP address of the primary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero.rw
InetAddressPrefixLength (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.11.3
dvbRcsSecondaryDnsServerInetAddressTypeThe type of Internet address of dvbRcsSecondaryDnsServerInetAddress. If the secondary DNS server Internet address is unassigned or unknown, then the value of this object is unknown(0).rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.11.4
dvbRcsSecondaryDnsServerInetAddressIP address of the secondary DNS server in the NCC. If the terminal has no secondary DNS server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsSecondaryDnsServerInetAddressType object.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.11.5
dvbRcsSecondaryDnsServerInetAddressPrefixLengthPrefix length for the IP address of the secondary DNS server in the NCC. If this address prefix is unknown or does not apply, the value is zero.rw
InetAddressPrefixLength (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.11.6
dvbRcsNetworkNccMgtInetAddressTypeThe type of Internet address of dvbRcsNetworkNccMgtInetAddress. If the management server Internet address is unassigned or unknown, then the value of this object is unknown(0).rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.12
dvbRcsNetworkNccMgtInetAddressIP address of the management server in the NCC. If the terminal has no management server assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsNetworkNccMgtInetAddressType object.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.13
dvbRcsNetworkNccMgtInetAddressPrefixLengthPrefix length for the IP address of the management server in the NCC. If this address prefix is unknown or does not apply, the value is zero.rw
InetAddressPrefixLength (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.2.14
dvbRcsNetworkConfigFileDownloadUrlFull path name for the configuration file download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.rw
Uri
.1.3.6.1.2.1.10.239.1.1.2.15
dvbRcsNetworkInstallLogFileDownloadUrlFull path of the installation log file to download. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be created on the installer's computer and downloaded to the RCST. The format of this parameter follows RFC 3986.rw
Uri
.1.3.6.1.2.1.10.239.1.1.2.16
dvbRcsNetworkConfigFileUploadUrlFull path name for the configuration file upload. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.rw
Uri
.1.3.6.1.2.1.10.239.1.1.2.17
dvbRcsNetworkLogFileUploadUrlFull path of the event log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The format of this parameter follows RFC 3986.rw
Uri
.1.3.6.1.2.1.10.239.1.1.2.18
dvbRcsNetworkInstallLogFileUploadUrlFull path of the installation log file. It includes the protocol type (TFTP or FTP) and the associated server IP address or hostname. Hostname can only be used if DNS is supported by the RCST. The installation log file can be retrieved from the RCST by the NCC or by the installer via the LAN. The format of this parameter follows RFC 3986.rw
Uri
.1.3.6.1.2.1.10.239.1.1.2.19
dvbRcsRcstInstall
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.3
dvbRcsInstallAntennaAlignmentStateIndicates the alignment state of the antenna: (1)-Start; (2)-Deny; (3)-Continue; (4)-Stop; (5)-Success; (6)-Failrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.3.1
dvbRcsInstallCwFrequencyFrequency of the transmitted Continuous Wave carrier (in 100 Hz). Minimum required precision is 1 kHz.rw
Unsigned32 UNITS "x100 Hz"
.1.3.6.1.2.1.10.239.1.1.3.2
dvbRcsInstallCwMaxDurationTime after which the Continuous Wave carrier must be put down (in seconds).rw
Unsigned32 UNITS "seconds"
.1.3.6.1.2.1.10.239.1.1.3.3
dvbRcsInstallCwPowerIDU TX output level when the IDU is configured to send CW. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm. Reconfiguration is applied immediately to a CW.rw
Integer32 UNITS "x0.1 dBm"
.1.3.6.1.2.1.10.239.1.1.3.4
dvbRcsInstallCoPolReadingCo-polarization measured value during installation procedure (in 0.1 dB).rw
Unsigned32 UNITS "x0.1 dB"
.1.3.6.1.2.1.10.239.1.1.3.5
dvbRcsInstallXPolReadingCross-polarization measured value during installation procedure (in 0.1 dB).rw
Unsigned32 UNITS "x0.1 dB"
.1.3.6.1.2.1.10.239.1.1.3.6
dvbRcsInstallCoPolTargetCo-polarization target value during installation procedure (in 0.1 dB).rw
Unsigned32 UNITS "x0.1 dB"
.1.3.6.1.2.1.10.239.1.1.3.7
dvbRcsInstallXPolTargetCross-polarization target value during installation procedure (in 0.1 dB).rw
Unsigned32 UNITS "x0.1 dB"
.1.3.6.1.2.1.10.239.1.1.3.8
dvbRcsInstallStandByDurationTime to wait in stand-by mode (in seconds).rw
Unsigned32 UNITS "seconds"
.1.3.6.1.2.1.10.239.1.1.3.9
dvbRcsInstallTargetEsN0This value describes the wanted Es/N0 value that enables operation of the return link with the required error performance. The values shall be given in tenth of dB and the initial value shall be equal to 7 dB. The range shall be from 0 dB to 31.5 dB, with a precision of 0.1 dB.rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.3.10
dvbRcsRcstQos
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.4
dvbRcsPktClassTableThis table describes the packet classification used in the DVB-RCS terminal. The number of entries is specified by dvbRcsPktClassIndex.
SEQUENCE OF DvbRcsPktClassEntry
.1.3.6.1.2.1.10.239.1.1.4.1
dvbRcsPktClassEntryAn entry in the packet classification table. One object type of each entry may have a value in the active range (a non-default value). The other object types are then assumed to be set to 'inactive'. The entry with the lowest index value takes precedence when classifying a packet.
DvbRcsPktClassEntry
.1.3.6.1.2.1.10.239.1.1.4.1.1
dvbRcsPktClassIndexIndex automatically incremented by one at row creation.
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.1.1.1
dvbRcsPktClassDscpLowThis object specifies the low value of a range of Diffserv Code Point (DSCP) values to which a packet is compared.rw
Dscp (DIFFSERV-DSCP-TC)
.1.3.6.1.2.1.10.239.1.1.4.1.1.2
dvbRcsPktClassDscpHighThis object specifies the high value of a range of Diffserv Code Point (DSCP) values to which a packet is compared.rw
Dscp (DIFFSERV-DSCP-TC)
.1.3.6.1.2.1.10.239.1.1.4.1.1.3
dvbRcsPktClassDscpMarkValueThis object is the Diffserv Code Point (DSCP) value used to mark the packet; -1 indicates no DSCP marking. Possible DSCP marks values are (0..63)rw
DscpOrAny (DIFFSERV-DSCP-TC)
.1.3.6.1.2.1.10.239.1.1.4.1.1.4
dvbRcsPktClassIpProtocolThis object specifies the IP protocol to which a packet is compared. A value of 255 means match all.rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.1.1.5
dvbRcsPktClassSrcInetAddressTypeThe type of Internet address of dvbRcsPktClassSrcInetAddress. If the packet class source Internet address is unassigned or unknown, then the value of this object is unknown(0).rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.4.1.1.6
dvbRcsPktClassSrcInetAddressThis object specifies the IP source address to which a packet is compared. If the packet class has no source Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPktClassSrcInetAddressType object.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.4.1.1.7
dvbRcsPktClassSrcInetAddressPrefixLengthPrefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive.rw
InetAddressPrefixLength (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.4.1.1.8
dvbRcsPktClassDstInetAddressTypeThe type of Internet address of dvbRcsPktClassDstInetAddress. If the packet class destination Internet address is unassigned or unknown, then the value of this object is unknown(0).rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.4.1.1.9
dvbRcsPktClassDstInetAddressThis object specifies the IP destination address to which a packet is compared. If the packet class has no destination Internet address assigned or if this Internet address is unknown, the value of this object is the zero-length OCTET STRING. The InetAddressType is given by the dvbRcsPktClassDstInetAddressType object.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.4.1.1.10
dvbRcsPktClassDstInetAddressPrefixLengthPrefix length of the IP source address that will be matched for this packet class. A value of zero indicates that the selectivity is inactive.rw
InetAddressPrefixLength (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.4.1.1.11
dvbRcsPktClassSrcPortLowThis object specifies the low range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.rw
InetPortNumber (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.4.1.1.12
dvbRcsPktClassSrcPortHighThis object specifies the high range of the source port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.rw
InetPortNumber (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.4.1.1.13
dvbRcsPktClassDstPortLowThis object specifies the low range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.rw
InetPortNumber (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.4.1.1.14
dvbRcsPktClassDstPortHighThis object specifies the high range of the destination port to which a packet is compared. A value of 0 indicates that the selectivity is inactive.rw
InetPortNumber (INET-ADDRESS-MIB)
.1.3.6.1.2.1.10.239.1.1.4.1.1.15
dvbRcsPktClassVlanUserPriThis object specifies the VLAN User Priority to which a packet is compared. A value of -1 indicates that the selectivity is inactive.rw
Integer32 (-1..7)
.1.3.6.1.2.1.10.239.1.1.4.1.1.16
dvbRcsPktClassPhbAssociationAssociate the filter entry to a specific PHB (refer to dvbRcsPhbIdentifier).rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.1.1.17
dvbRcsPktClassRowStatusThe status of this conceptual row. All writable objects in this row may be modified at any time.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.10.239.1.1.4.1.1.18
dvbRcsPhbMappingTableThis table is a list of Per-Hop Behavior (PHB) MIB entries. It describes the PHB mapping to the Request Class.
SEQUENCE OF DvbRcsPhbMappingEntry
.1.3.6.1.2.1.10.239.1.1.4.2
dvbRcsPhbMappingEntryAn entry in the PHB mapping table.
DvbRcsPhbMappingEntry
.1.3.6.1.2.1.10.239.1.1.4.2.1
dvbRcsPhbIdentifierIdentification of the Per-Hop Behavior (PHB). It follows the unsigned 16-bit binary encoding as specified in RFC 3140. The value 0 designates the Default PHB.
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.2.1.1
dvbRcsPhbNameThe name of the Per-Hop Behavior (PHB).rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.4.2.1.2
dvbRcsPhbRequestClassAssociationThis object is an association of this Per-Hop Behavior (PHB) to a Request Class (by reference to a Request Class index).rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.2.1.3
dvbRcsPhbMappingRowStatusThe status of this conceptual row. All writable objects in this row may be modified at any time.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.10.239.1.1.4.2.1.4
dvbRcsRequestClassTableThis table is a list of Request Class entries. This class describes the layer 2 QoS objects.
SEQUENCE OF DvbRcsRequestClassEntry
.1.3.6.1.2.1.10.239.1.1.4.3
dvbRcsRequestClassEntryAn entry in the Request Class table.
DvbRcsRequestClassEntry
.1.3.6.1.2.1.10.239.1.1.4.3.1
dvbRcsRequestClassIndexIndex of the Request Class table. A total of 16 entries are supported.
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.3.1.1
dvbRcsRequestClassNameName of the Request Class.rw
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.4.3.1.2
dvbRcsRequestClassChanIdChannel ID of the Request Class.rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.3.1.3
dvbRcsRequestClassVccVpiDefines the VPI used for the Request Class (ATM profile).rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.3.1.4
dvbRcsRequestClassVccVciDefines the VCI used for the Request Class (ATM profile).rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.3.1.5
dvbRcsRequestClassPidPoolReferenceReference to the Packet IDentifier (PID) pool applicable for the Request Class.rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.3.1.6
dvbRcsRequestClassCraDefines the Continuous Rate Assignment (CRA) level for the Request Class in bits per second (bit/s).rw
Unsigned32 UNITS "bit/s"
.1.3.6.1.2.1.10.239.1.1.4.3.1.7
dvbRcsRequestClassRbdcMaxMaximum Rate-Based Dynamic Capacity (RBDC) that can be requested for the Request Class, in number of 2 kbit/s.rw
Unsigned32 UNITS "x2 kbit/s"
.1.3.6.1.2.1.10.239.1.1.4.3.1.8
dvbRcsRequestClassRbdcTimeoutPersistence of the Rate-Based Dynamic Capacity (RBDC) request, expressed in superframes.rw
Unsigned32 UNITS "superframes"
.1.3.6.1.2.1.10.239.1.1.4.3.1.9
dvbRcsRequestClassVbdcMaxMaximum Volume-Based Dynamic Capacity (VBDC) that can be allocated to the Request Class, in payload units (one ATM cell or one MPEG packet) per superframe.rw
Unsigned32 UNITS "ATM cells/MPEG packets"
.1.3.6.1.2.1.10.239.1.1.4.3.1.10
dvbRcsRequestClassVbdcTimeoutTime after which the RCST considers that the pending requests are lost. The RCST may issue new requests for that traffic. Volume-Based Dynamic Capacity (VBDC) Timeout is expressed in superframes.rw
Unsigned32 UNITS "superframes"
.1.3.6.1.2.1.10.239.1.1.4.3.1.11
dvbRcsRequestClassVbdcMaxBackLogVolume-Based Dynamic Capacity (VBDC) back log per Request Class (expressed in bytes).rw
Unsigned32 UNITS "bytes"
.1.3.6.1.2.1.10.239.1.1.4.3.1.12
dvbRcsRequestClassRowStatusThe status of this conceptual row. It is not possible to change values in a row of this table while the row is active.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.10.239.1.1.4.3.1.13
dvbRcsPidPoolTableThis table contains the Packet IDentifier (PID) pools. For the MPEG profile, several Request Classes may be mapped within a pool of several PIDs to allow Section Packing across several Request Classes. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool.
SEQUENCE OF DvbRcsPidPoolEntry
.1.3.6.1.2.1.10.239.1.1.4.4
dvbRcsPidPoolEntryAn entry in the PID pool table.
DvbRcsPidPoolEntry
.1.3.6.1.2.1.10.239.1.1.4.4.1
dvbRcsPidPoolIndexIndex of the PID pool in the PID pool table.
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.4.1.1
dvbRcsPidIndexIndex of the PID entry within the PID pool.
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.4.1.2
dvbRcsPidValueDefines one of the PIDs to be used in a PID pool of dvbRcsPidPoolIndex. A PID value may occur in more than one PID pool. Each PID value can effectively occur only once in each pool.rw
Unsigned32
.1.3.6.1.2.1.10.239.1.1.4.4.1.3
dvbRcsPidPoolRowStatusThe status of this conceptual row. All writable objects in this row may be modified at any time.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.10.239.1.1.4.4.1.4
dvbRcsQosGlobalRbdcMaxGlobal maximum RBDC that can be requested for the RCST, in number of 2 kbit/s.rw
Unsigned32 UNITS "x2 kbit/s"
.1.3.6.1.2.1.10.239.1.1.4.5
dvbRcsQosGlobalVbdcMaxGlobal maximum VBDC that can be allocated to the RCST, in payload units (one ATM cell or one MPEG packet) per superframe.rw
Unsigned32 UNITS "ATM cells/MPEG packets"
.1.3.6.1.2.1.10.239.1.1.4.6
dvbRcsQosGlobalVbdcMaxBackLogGlobal VBDC back log at the RCST level (expressed in bytes). It is used only if the VBDC back log is not configured in the Request Class (expressed in bytes).rw
Unsigned32 UNITS "bytes"
.1.3.6.1.2.1.10.239.1.1.4.7
dvbRcsQosChannelIdStrictDispatchingIndicates whether the RCST will strictly follow RC association when signaled through Channel_ID in the TBTP: (0)- no strict association (1)- strict associationrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.4.8
dvbRcsRcstControl
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.5
dvbRcsCtrlRebootCommandThis variable shall force the RCST to reboot: (1)- idle (2)- normal reboot (from current software load) (3)- reboot from alternate load (swap to alternate load before reboot)rw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.1
dvbRcsCtrlRcstTxDisableThis variable shall force the RCST to stop transmission (transmit disabled as defined in SatLabs System Recommendations): (1)- idle (2)- initiate Tx Disabledrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.2
dvbRcsCtrlUserTrafficDisableThis variable shall disable user traffic (only RCST management traffic can be transmitted): (1)- idle (2)- disable user trafficrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.3
dvbRcsCtrlCwEnableThis variable will force the RCST to start transmission of CW, if the RCST is first set to the installation state and is properly configured for CW transmission: (1)- off (2)- onrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.4
dvbRcsCtrlOduTxReferenceEnableEnables activation and deactivation of the 10 MHz reference clock in the Tx IFL cable: (1) off (2) onrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.5
dvbRcsCtrlOduTxDCEnableEnables activation and deactivation of DC in the Tx IFL cable: (1) off (2) onrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.6
dvbRcsCtrlOduRxDCEnableEnables activation and deactivation of DC in the Rx IFL cable: (1) off (2) onrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.7
dvbRcsCtrlDownloadFileCommandThis variable will initiate an RCST configuration file download process: (1) idle (2) download RCST configuration file from TFTP/FTP server (3) download RCST installation log file from TFTP/FTP server (INSTALL_LOG feature)rw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.8
dvbRcsCtrlUploadFileCommandThis variable will initiate an RCST upload process: (1) idle (2) upload RCST configuration file to TFTP/FTP server (3) upload RCST event/alarm log file to TFTP/FTP server (4) upload RCST installation log file to TFTP/FTP server (INSTALL_LOG feature)rw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.9
dvbRcsCtrlActivateConfigFileCommandTriggers the RCST to use the configuration file and update its parameters accordingly. Some RCST implementations may require a reboot for the parameters to take effect (vendor specific). (1) idle (2) activaterw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.10
dvbRcsCtrlRcstLogonCommandThis variable will initiate an RCST logon: (1) idle (2) initiate RCST logonrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.11
dvbRcsCtrlRcstLogoffCommandThis variable will initiate an RCST logoff: (1) idle (2) initiate RCST logoffrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.12
dvbRcsCtrlRcstRxReacquireThis variable will force the RCST to acquire the forward link and start receiving: (1) idle (2) reacquire forward linkrw
Enumeration
.1.3.6.1.2.1.10.239.1.1.5.13
dvbRcsRcstState
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.1.6
dvbRcsRcstModeIdentifies the current mode of the RCST and allows the RCST to return to the installation mode when needed. Values for the RCST mode are: Installation (0) Operational (1)rw
Enumeration
.1.3.6.1.2.1.10.239.1.1.6.1
dvbRcsRcstFaultStatusProvides the fault status of the terminal. The fault status management is vendor specific. Values for the fault status are: no fault (0) fault (1)ro
Enumeration
.1.3.6.1.2.1.10.239.1.1.6.2
dvbRcsRcstFwdLinkStatusProvides the status of the RCST forward link. Values for the forward link status are: Not acquired (0) Acquired (1)ro
Enumeration
.1.3.6.1.2.1.10.239.1.1.6.3
dvbRcsRcstRtnLinkStatusProvides the status of the RCST return link. Values for the return link status are: Logged-off (0) Logged-on (1)ro
Enumeration
.1.3.6.1.2.1.10.239.1.1.6.4
dvbRcsRcstLogUpdatedIndicates the existence of an updated event log file: No update (0) Event Log file updated (1) The RCST should remove the 'Event Log file updated' indication as the log file is fetched by the NCC.ro
Enumeration
.1.3.6.1.2.1.10.239.1.1.6.5
dvbRcsRcstCurrentSoftwareVersionCurrent RCST software version.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.6.6
dvbRcsRcstAlternateSoftwareVersionAlternate (backup/new) RCST software version.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.6.7
dvbRcsRcstActivatedConfigFileVersionVersion of the most recently activated configuration file. The version is vendor specific.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.6.8
dvbRcsRcstDownloadedConfigFileVersionVersion of the most recently downloaded configuration file. Version is vendor specific. If the value is different from dvbRcsRcstActivatedConfigFileVersion, it is pending for activation.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.1.6.9
dvbRcsFwdConfig
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.2.1
dvbRcsFwdStartTableLists forward link attachment points (e.g., different for installation and operation). The table describes the forward link parameters used for the start-up stream with the NCC.
SEQUENCE OF DvbRcsFwdStartEntry
.1.3.6.1.2.1.10.239.1.2.1.1
dvbRcsFwdStartEntryAn entry in the Forward Link Start Configuration table.
DvbRcsFwdStartEntry
.1.3.6.1.2.1.10.239.1.2.1.1.1
dvbRcsFwdStartIndexIndex of the Forward Link StartConfig table.
Unsigned32
.1.3.6.1.2.1.10.239.1.2.1.1.1.1
dvbRcsFwdStartPopIdPopulation identifier associated with the start-up forward link: -1: any (auto) 0-65535: specific StartPopId If 'any' is set, the RCST will assume membership of any announced population ID and will commence with logon in accordance with this assumption.rw
Integer32 (-1..65535)
.1.3.6.1.2.1.10.239.1.2.1.1.1.2
dvbRcsFwdStartFrequencyFrequency of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiples of 100 kHz.rw
Unsigned32 UNITS "x100 kHz"
.1.3.6.1.2.1.10.239.1.2.1.1.1.3
dvbRcsFwdStartPolar2-bit field giving the polarization of the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link: 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular rightrw
Enumeration
.1.3.6.1.2.1.10.239.1.2.1.1.1.4
dvbRcsFwdStartFormatSpecifies the transmission format standard applied for the startup stream. The start transport stream carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: -1: unspecified (automatic format acquisition is assumed) 0: DVB-S (support of this value is mandatory if DVB-S support is claimed) 1: DVB-S2 with CCM (support of this value is mandatory if DVB-S2 CCM support is claimed) 2: DVB-S2 with VCM or ACM (support of this value is mandatory if DVB-S2 ACM support is claimed) This allows the RCST to discriminate between CCM and VCM/ACM when selecting the forward link. The support of automatic format selection is optional. One or several of the other format selections must be supported, according to the claimed SatLabs profile support.rw
Enumeration
.1.3.6.1.2.1.10.239.1.2.1.1.1.5
dvbRcsFwdStartRolloffSpecifies the receive filter roll-off applied on the start transponder. The start transponder carries a Network Information Table that the RCST uses for acquiring the forward link signaling. Supported values are: 0: any (auto) 1: 0.20 2: 0.25 3: 0.35rw
Enumeration
.1.3.6.1.2.1.10.239.1.2.1.1.1.6
dvbRcsFwdStartSymbolRateSpecifies the symbol rate on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Its value shall be given in multiples of 100 symbols/s.rw
Unsigned32 UNITS "x100 symbols/s"
.1.3.6.1.2.1.10.239.1.2.1.1.1.7
dvbRcsFwdStartInnerFecSpecifies the inner Forward Error Correction used on the start transponder carrying a Network Information Table to which any RCST shall trigger to acquire forward link. Supported values are: autoFec (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The support of autoFec is optional.rw
Enumeration
.1.3.6.1.2.1.10.239.1.2.1.1.1.8
dvbRcsFwdStartRowStatusThe status of this conceptual row. It is not possible to change values in a row of this table while the row is active.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.2.1.10.239.1.2.1.1.1.9
dvbRcsFwdStatus
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.2.2
dvbRcsFwdStatusPopIdPopulation identifier applied at log-on: 0-65535: specific StartPopId If the RCST was allowed to logon with any population, the RCST will report the base number of the announced population ID indicated by the RCS Map Table linkage descriptor used at logon.ro
Unsigned32
.1.3.6.1.2.1.10.239.1.2.2.1
dvbRcsFwdStatusTableThis table describes the current status of Forward Link interfaces.
SEQUENCE OF DvbRcsFwdStatusEntry
.1.3.6.1.2.1.10.239.1.2.2.2
dvbRcsFwdStatusEntryAn entry in the forward link status table. Each entry is associated with a physical interface. An RCST shall support at least one entry.
DvbRcsFwdStatusEntry
.1.3.6.1.2.1.10.239.1.2.2.2.1
dvbRcsFwdStatusIndexIndex of the forward link status table.
Unsigned32
.1.3.6.1.2.1.10.239.1.2.2.2.1.1
dvbRcsFwdStatusIfReferenceCross reference to the interface table.ro
Unsigned32
.1.3.6.1.2.1.10.239.1.2.2.2.1.2
dvbRcsFwdStatusNetIdInteractive network identifier of the forward link (from the RCS Map Table).ro
Unsigned32
.1.3.6.1.2.1.10.239.1.2.2.2.1.3
dvbRcsFwdStatusNetNameThe name of the interactive network of the forward link (from the RCS Map Table).ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.2.1.10.239.1.2.2.2.1.4
dvbRcsFwdStatusFormatSpecifies the transmission format applied on the forward link. Supported values are (from RCS Map Table): 0: DVB-S 1: DVB-S2 using CCM 2: DVB-S2 using VCM or ACM 3: reservedro
Enumeration
.1.3.6.1.2.1.10.239.1.2.2.2.1.5
dvbRcsFwdStatusFrequencyAn estimate of the frequency of the forward link. Its value shall be given in multiples of 100 kHz.ro
Unsigned32 UNITS "x100 kHz"
.1.3.6.1.2.1.10.239.1.2.2.2.1.6
dvbRcsFwdStatusPolar2-bit field giving the polarization of the forward link Supported values are (from RCS Map Table): 00: linear and horizontal 01: linear and vertical 10: circular left 11: circular rightro
Enumeration
.1.3.6.1.2.1.10.239.1.2.2.2.1.7
dvbRcsFwdStatusInnerFecSpecifies the inner Forward Error Correction used on the forward link for transmission to the RCST. Supported values are: unknown (-1), fecRate1/2 (0), fecRate2/3 (1), fecRate3/4 (2), fecRate5/6 (3), fecRate7/8 (4), fecRate8/9 (5), fecRate3/5 (6), fecRate4/5 (7), fecRate9/10 (8), fecRate2/5 (9), fecRate1/3 (10), fecRate1/4 (11), noInnerCode (12) The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.ro
Enumeration
.1.3.6.1.2.1.10.239.1.2.2.2.1.8
dvbRcsFwdStatusSymbolRateAn estimate of the symbol rate of the forward link. Its value shall be given in multiples of 100 symbols/s.ro
Unsigned32 UNITS "x100 symbols/s"
.1.3.6.1.2.1.10.239.1.2.2.2.1.9
dvbRcsFwdStatusRolloffAn estimate of the roll-off applied on the forward link. Supported values are: 0: undefined 1: 0.20 2: 0.25 3: 0.35ro
Enumeration
.1.3.6.1.2.1.10.239.1.2.2.2.1.10
dvbRcsFwdStatusModulationIndicates the modulation on the forward link used for transmission to the RCST. Supported values are: 0: unknown 1: BPSK 2: QPSK 3: 8PSK 4: 16APSK 5: 32APSK The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.ro
Enumeration
.1.3.6.1.2.1.10.239.1.2.2.2.1.11
dvbRcsFwdStatusFecFrameIndicates the frame length used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Short frame 2: Normal frame The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.ro
Enumeration
.1.3.6.1.2.1.10.239.1.2.2.2.1.12
dvbRcsFwdStatusPilotIndicates whether pilots are used on the forward link for transmission to the RCST. Supported values are: 0: Unknown 1: Pilots are not used 2: Pilots are used The RCST will report a value that has been used for transmission to the RCST within the most recent 60 seconds. If this is not relevant, the RCST will report 'unknown'.ro
Enumeration
.1.3.6.1.2.1.10.239.1.2.2.2.1.13
dvbRcsFwdStatusBerProvides the RCST BER on the Forward Link in log10 units.ro
Integer32 UNITS "exponent of 10"
.1.3.6.1.2.1.10.239.1.2.2.2.1.14
dvbRcsFwdStatusCnrProvides the RCST CNR on the Forward Link in 0.1 dB units.ro
Integer32 UNITS "0.1 dB"
.1.3.6.1.2.1.10.239.1.2.2.2.1.15
dvbRcsFwdStatusRxPowerProvides the power level of the forward link as received at the IDU, in 0.1 dBm units.ro
Integer32 UNITS "0.1 dBm"
.1.3.6.1.2.1.10.239.1.2.2.2.1.16
dvbRcsRtnConfig
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.3.1
dvbRcsRtnConfigMaxEirpMax Equivalent Isotropic Radiated Power (EIRP) of the RCST, given in resolution of 0.1 dBm and applied when the IDU can, itself, set the necessary IDU TX output level, e.g., when using a BUC that has a power level detector and that provides sufficient feedback to the IDU.rw
Integer32 UNITS "x0.1 dBm"
.1.3.6.1.2.1.10.239.1.3.1.1
dvbRcsRtnConfigDefIfLevelIDU TX output level applied in case the dvbRcsRtnConfigMaxEirp cannot be used. The resolution is 0.1 dBm and the accuracy is +/- 1 dBm.rw
Integer32 UNITS "x0.1 dBm"
.1.3.6.1.2.1.10.239.1.3.1.2
dvbRcsRtnStatus
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.1.3.2
dvbRcsRtnStatusEbN0The EbN0 value reported for the return link, referenced to the regular SYNC burst transmission, in 0.1 dB units.ro
Integer32 UNITS "x0.1 dB"
.1.3.6.1.2.1.10.239.1.3.2.1
dvbRcsRtnStatusSFDurationThe duration of the currently applied return link superframe structure, in tenths of milliseconds.ro
Unsigned32
.1.3.6.1.2.1.10.239.1.3.2.2
dvbRcsRtnStatusPayloadUnitIndicates if the payload unit used for the return link is ATM or MPEG.ro
Enumeration
.1.3.6.1.2.1.10.239.1.3.2.3
dvbRcsConformance
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.2
dvbRcsRcstGroups
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.2.1
dvbRcsRcstSystemGroupA collection of objects providing information applicable for basic device management support.
Unknown
.1.3.6.1.2.1.10.239.2.1.1
dvbRcsRcstNetworkGroupA collection of objects providing basic networking management support.
Unknown
.1.3.6.1.2.1.10.239.2.1.2
dvbRcsRcstExtNetworkGroupA collection of objects providing extended networking management support.
Unknown
.1.3.6.1.2.1.10.239.2.1.3
dvbRcsRcstDnsGroupA collection of objects providing DNS management support.
Unknown
.1.3.6.1.2.1.10.239.2.1.4
dvbRcsRcstInstallGroupA collection of objects providing information applicable for basic installation support.
Unknown
.1.3.6.1.2.1.10.239.2.1.5
dvbRcsRcstExtInstallGroupA collection of objects providing extended device installation support.
Unknown
.1.3.6.1.2.1.10.239.2.1.6
dvbRcsRcstQosGroupA collection of objects providing basic access to QoS configuration data.
Unknown
.1.3.6.1.2.1.10.239.2.1.7
dvbRcsRcstEnhancedClassifierGroupA collection of objects providing support for management of the enhanced classifier.
Unknown
.1.3.6.1.2.1.10.239.2.1.8
dvbRcsRcstMpegQosGroupA collection of objects providing access to MPEG-related link QoS configuration data.
Unknown
.1.3.6.1.2.1.10.239.2.1.9
dvbRcsRcstGlobalQosGroupA collection of objects providing access to global RCST QoS configuration data.
Unknown
.1.3.6.1.2.1.10.239.2.1.10
dvbRcsRcstStrictQosGroupA collection of objects allowing management of strict channel ID dispatching.
Unknown
.1.3.6.1.2.1.10.239.2.1.11
dvbRcsRcstControlGroupA collection of objects allowing basic RCST control.
Unknown
.1.3.6.1.2.1.10.239.2.1.12
dvbRcsRcstExtControlGroupA collection of objects allowing extended RCST control.
Unknown
.1.3.6.1.2.1.10.239.2.1.13
dvbRcsRcstStateGroupA collection of objects allowing access to RCST state.
Unknown
.1.3.6.1.2.1.10.239.2.1.14
dvbRcsFwdConfigGroupA collection of objects providing basic start forward link configuration support.
Unknown
.1.3.6.1.2.1.10.239.2.1.15
dvbRcsFwdStatusGroupA collection of objects providing forward link status.
Unknown
.1.3.6.1.2.1.10.239.2.1.16
dvbRcsRtnConfigGroupA collection of objects providing basic return link configuration support.
Unknown
.1.3.6.1.2.1.10.239.2.1.17
dvbRcsRtnExtConfigGroupA collection of objects providing extended return link configuration support.
Unknown
.1.3.6.1.2.1.10.239.2.1.18
dvbRcsRtnStatusGroupA collection of objects allowing access to return link status.
Unknown
.1.3.6.1.2.1.10.239.2.1.19
dvbRcsRtnExtStatusGroupA collection of objects allowing access to extended return link status.
Unknown
.1.3.6.1.2.1.10.239.2.1.20
dvbRcsRcstOduListGroupA collection of objects supporting flexible selection of ODU devices.
Unknown
.1.3.6.1.2.1.10.239.2.1.21
dvbRcsRcstCompliances
OBJECT IDENTIFIER
.1.3.6.1.2.1.10.239.2.2
dvbRcsRcstCompliance1The compliance statement for DVB-RCS terminals that are compliant with SatLabs System Recommendations. Compliance is linked to the support by the terminal of the options or features defined in the SatLabs System Recommendations. The supported options and features of a terminal are declared in objects dvbRcsSystemSatLabsOptionsDeclaration and dvbRcsSystemSatLabsFeaturesDeclaration respectively.
Unknown
.1.3.6.1.2.1.10.239.2.2.1
DVB-RCS-MIB - SNMP MIB Reference | MIBs Explorer