DVB-MGSIGNALCHARACTERISTICS-MIB
AI MIB Summary
The DVB-MGSIGNALCHARACTERISTICS-MIB enables monitoring of DVB transport stream structure and RF characteristics, specifically metrics defined in ETSI TR 101 290, to validate signal integrity and measurement accuracy in digital video broadcasting networks.
DVB Measurement Group Signal Characteristics MIB module. This mgSignalCharacteristics module contains Transport Stream structure information and RF characteristics information to assist in interpreting measurements and tests, in particular those specified in TR 101 290.
Main OID:
mgSignalCharacteristics.1.3.6.1.4.1.2696.3.3
114
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
114 total| Object Name |
|---|
dvb OBJECT IDENTIFIER .1.3.6.1.4.1.2696 |
mg OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3 |
mgSignalCharacteristicsDVB Measurement Group Signal Characteristics MIB module. This mgSignalCharacteristics module contains Transport Stream structure information and RF characteristics information to assist in interpreting measurements and tests, in particular those specified in TR 101 290. MODULE-IDENTITY .1.3.6.1.4.1.2696.3.3 |
mgSignalCharacteristicsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.1 |
mgTSStructure OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.1.1 |
mgTSStructureTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.1.1.1 |
structureTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.1.1.1.0 |
tsStructureChangeTrapTrap which is sent when any value within the mgTSStructure branch of this MIB changes. Transmission of the trap is subject to rate control through the structureTrapControlRateStatus object. NOTIFICATION-TYPE .1.3.6.1.4.1.2696.3.3.1.1.1.0.1 |
structureTrapControlTablePer-input table of values which control the generation of tsStructureChangeTrap traps. SEQUENCE OF StructureTrapControlEntry .1.3.6.1.4.1.2696.3.3.1.1.1.1 |
structureTrapControlEntryRow specification StructureTrapControlEntry .1.3.6.1.4.1.2696.3.3.1.1.1.1.1 |
structureTrapControlInputNumberTransport Stream input to which the trap control objects apply. InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.1.1.1.1 |
structureTrapControlOIDThis object holds the OID of the object within the mgTSStructure branch of the MIB whose change triggered the trap. It is present for the formal purpose of defining the variable bindings returned with the tsStructureChangeTrap. It is not accessible for normal reading.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.1.1.1.1.1.2 |
structureTrapControlChangeTimeThis indicates the time when the change which triggered the trap occurred. It is present for the formal purpose of defining the variable bindings returned with the tsStructureChangeTrap. It is not accessible for normal reading.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2696.3.3.1.1.1.1.1.3 |
structureTrapControlRateStatusThis object is used for rate control of traps, preventing overload of the management network by transmission of an excessive number of traps. The value 'disabled' means that traps are never sent. The value 'enabled' means that a trap will be sent when triggered. When a trap is sent, the agent changes the value of this object to 'enabledThrottled'. In this state the agent will not send any more traps. The agent automatically changes the value back to 'enabled' when the time specified by trapControlPeriod expires. A management application may set the value to 'enabled' at any time, but must never set the value to 'enabledThrottled'.rw RateStatus (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.1.1.1.4 |
structureTrapControlPeriodThe agent will ensure that the interval between sending traps is no shorter than this time period (unless overridden by the manager).rw Unsigned32 .1.3.6.1.4.1.2696.3.3.1.1.1.1.1.5 |
structureTrapInputThe Transport Stream input whose change triggered the current trap. This information can also be obtained by analysing the structureTrapControlOID, but structureTrapInput provides the information directly. This object is present for the formal purpose of defining the variable bindings returned with the tsStructureChangeTrap. It is not accessible for normal reading.ro InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.1.2 |
mgTSTablePSI/SI information relating to the whole Transport Stream SEQUENCE OF MgTSEntry .1.3.6.1.4.1.2696.3.3.1.1.2 |
mgTSEntryRow specification MgTSEntry .1.3.6.1.4.1.2696.3.3.1.1.2.1 |
mgTSInputNumberThe physical input on which this Transport Stream appears InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.2.1.1 |
mgTSIdThe transport_stream_id for this Transport Stream as read from the PAT. If the transport_stream_id is unknown, this object has the value -1.ro INTEGER (-1..65535) .1.3.6.1.4.1.2696.3.3.1.1.2.1.2 |
mgTSOriginalNetworkIDThe original_network_id for this Transport Stream. This is found by reading the transport_stream_id from the PAT. This transport_stream_id is then located in the transport_stream_loop of the NIT (actual transport stream). The value of mgTSOriginalNetworkID is the original_network_id found in this instance of the loop.ro NetworkID .1.3.6.1.4.1.2696.3.3.1.1.2.1.3 |
mgTSNetworkIDThe network_id for this Transport Stream as read from the NIT. This is found by reading the network_id in the NIT (actual_network)ro NetworkID .1.3.6.1.4.1.2696.3.3.1.1.2.1.4 |
mgTSNetworkNamenetwork_name for this Transport Stream as read from the NIT. This is found by reading the network name descriptor in the NIT (actual_network). If the network_name is unknown, the value of this object is a zero length string.ro ReadableString .1.3.6.1.4.1.2696.3.3.1.1.2.1.5 |
mgServiceTablePSI/SI information relating to each service within the Transport Stream. A service is included in the table if it is found in both the PAT and the PMT. SEQUENCE OF MgServiceEntry .1.3.6.1.4.1.2696.3.3.1.1.3 |
mgServiceEntryRow specification MgServiceEntry .1.3.6.1.4.1.2696.3.3.1.1.3.1 |
mgServiceInputNumberThe physical input on which this Transport Stream appears InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.3.1.1 |
mgServiceNumberThe program_number/service_id to which the information in the rest of the row applies. ServiceId (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.3.1.2 |
mgServiceTypeThe service_type from the service_descriptor field in the SDT. A value of -1 indicates that the service_type is unknown.ro INTEGER (-1..255) .1.3.6.1.4.1.2696.3.3.1.1.3.1.3 |
mgServiceNameThe service_name from the service_descriptor in the SDT. If this information is not available, the value of this object will be a zero length string.ro ReadableString .1.3.6.1.4.1.2696.3.3.1.1.3.1.4 |
mgServiceProviderNameThe service_provider_name from the service_descriptor in the SDT. If this information is not available, the value of this object will be a zero length string.ro ReadableString .1.3.6.1.4.1.2696.3.3.1.1.3.1.5 |
mgServicePMTPIDThe PMT PID for this service as read from the PATro PID .1.3.6.1.4.1.2696.3.3.1.1.3.1.6 |
mgServicePCRPIDThe PCR PID for this service as read from the PMTro PID .1.3.6.1.4.1.2696.3.3.1.1.3.1.7 |
mgServiceCondAccessThe encryption state of the service, derived from the free_CA_mode bit in the SDTro EncryptionState .1.3.6.1.4.1.2696.3.3.1.1.3.1.8 |
mgServiceEITComponentDescriptorThis is a text description of the main elementary stream in the service as read from the component_descriptor in the EIT. If this information is not available, the value of this object will be a zero length string.ro ReadableString .1.3.6.1.4.1.2696.3.3.1.1.3.1.9 |
mgPIDTablePSI/SI information relating to each PID in each service in the Transport Stream. A PID is included in the table if it listed as an elementary_PID in the PMT for the service. SEQUENCE OF MgPIDEntry .1.3.6.1.4.1.2696.3.3.1.1.4 |
mgPIDEntryRow specification MgPIDEntry .1.3.6.1.4.1.2696.3.3.1.1.4.1 |
mgPIDInputNumberThe physical input on which this Transport Stream appears InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.4.1.1 |
mgPIDServiceNumberThe program_number/service_id to which the row information applies. ServiceId (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.4.1.2 |
mgPIDNumberThe PID, included in the service identified by mgPIDServiceNumber, to which the information in the row applies. PIDPlusOne (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.4.1.3 |
mgPIDTypeThe stream_type read from the PMTro INTEGER .1.3.6.1.4.1.2696.3.3.1.1.4.1.4 |
mgPIDCondAccessThe encryption state of the PID. This is deduced from the values of the transport_scrambling_control field in the Transport Stream packet headers for this PID.ro EncryptionState .1.3.6.1.4.1.2696.3.3.1.1.4.1.5 |
mgEMMTableThis table identifies the PIDs occupied by EMMs SEQUENCE OF MgEMMEntry .1.3.6.1.4.1.2696.3.3.1.1.5 |
mgEMMEntryRow specification MgEMMEntry .1.3.6.1.4.1.2696.3.3.1.1.5.1 |
mgEMMInputNumberThe physical input on which this Transport Stream appears InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.5.1.1 |
mgEMMCaPIDThe CA_PID from the CA_descriptor in the CAT plus one. This indicates the PID on which the EMM is found. PIDPlusOne (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.5.1.2 |
mgEMMCASystemIDThe CA_system_ID from the CA_descriptor in the CATro CASystemID .1.3.6.1.4.1.2696.3.3.1.1.5.1.3 |
mgServiceECMTableThis table identifies the PIDs occupied by ECMs relating to a whole service. This information is found in the first descriptor loop of a TS_program_map_section. SEQUENCE OF MgServiceECMEntry .1.3.6.1.4.1.2696.3.3.1.1.6 |
mgServiceECMEntryRow specification MgServiceECMEntry .1.3.6.1.4.1.2696.3.3.1.1.6.1 |
mgServiceECMInputNumberThe physical input on which this Transport Stream appears InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.6.1.1 |
mgServiceECMServiceNumberThe program_number/service_id to which the information in the row applies. ServiceId (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.6.1.2 |
mgServiceECMCaPIDThe CA_PID from the CA_descriptor in the PMT plus one. This indicates the PID on which the ECM is found. PIDPlusOne (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.6.1.3 |
mgServiceECMCASystemIDThe CA_system_ID from the CA_descriptor in the PMTro CASystemID .1.3.6.1.4.1.2696.3.3.1.1.6.1.4 |
mgPIDECMTableThis table identifies the PIDs occupied by ECMs related to a single elementary stream. This information is found in the elementary stream specific descriptor loop of a TS_program_map_section. SEQUENCE OF MgPIDECMEntry .1.3.6.1.4.1.2696.3.3.1.1.7 |
mgPIDECMEntryRow specification MgPIDECMEntry .1.3.6.1.4.1.2696.3.3.1.1.7.1 |
mgPIDECMInputNumberThe physical input on which this Transport Stream appears InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.7.1.1 |
mgPIDECMServiceNumberThe program_number/service_id to which the information in the row applies. ServiceId (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.7.1.2 |
mgPIDECMPIDThe elementary stream PID which is unscrambled by this ECM. PIDPlusOne (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.7.1.3 |
mgPIDECMCaPIDThe CA_PID from the CA_descriptor in the PMT plus one. This indicates the PID on which the ECM is found. PIDPlusOne (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.7.1.4 |
mgPIDECMCASystemIDThe CA_system_ID from the CA_descriptor in the PMTro CASystemID .1.3.6.1.4.1.2696.3.3.1.1.7.1.5 |
mgNITDeliverySystemTableDelivery system information for this Transport Stream read from the delivery system descriptors in the NIT. This information is found by reading the transport_stream_id from the PAT. This transport_stream_id is then located in the transport_stream_loop of the NIT (actual_network). The delivery system descriptor found in this instance of the loop is analysed to obtain the values in this table. SEQUENCE OF MgNITDeliverySystemEntry .1.3.6.1.4.1.2696.3.3.1.1.8 |
mgNITDeliverySystemEntryRow specification MgNITDeliverySystemEntry .1.3.6.1.4.1.2696.3.3.1.1.8.1 |
mgNITDSInputNumberThe physical input on which this Transport Stream appears InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.8.1.1 |
mgNITDSSystemTypeWhich delivery system is in use. The value of this object determines which other objects in this table row have valid values. If this object has the value 'unknown' none of the other objects in this table row have valid values.ro DeliverySystemType (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.1.8.1.2 |
mgNITDSFrequencyThe frequency or centre_frequency for the transmission expressed in MHz Valid for: cable, satellite, terrestrialro FloatingPoint UNITS "MHz" .1.3.6.1.4.1.2696.3.3.1.1.8.1.3 |
mgNITDSFecOuterThe Outer Forward Error Correction Code, values as specified for the cable_delivery_system_descriptor. Valid for: cablero INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.4 |
mgNITDSCableModulationModulation scheme, values as specified for the cable_delivery_system_descriptor Valid for: cablero INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.5 |
mgNITDSSymbolRateThe symbol rate in symbols per second Valid for: cable, satellitero Unsigned32 UNITS "symbol/s" .1.3.6.1.4.1.2696.3.3.1.1.8.1.6 |
mgNITDSFecInnerThe inner FEC scheme, values as specified for the cable_delivery_system_descriptor Valid for: cable, satellitero INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.7 |
mgNITDSOrbitalPositionThe orbital position in degrees Valid for: satellitero FloatingPoint UNITS "degree" .1.3.6.1.4.1.2696.3.3.1.1.8.1.8 |
mgNITDSWestEastFlagOrbital position direction: east (1) or west (0). Valid for: satellitero Enumeration .1.3.6.1.4.1.2696.3.3.1.1.8.1.9 |
mgNITDSPolarizationPolarization, values as specified for the satellite_delivery_system_descriptor Valid for: satellitero INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.10 |
mgNITDSSatelliteModulationModulation scheme, values as specified for the satellite_delivery_system_descriptor Valid for: satellitero INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.11 |
mgNITDSBandwidthThe bandwidth, values as specified for the terrestrial_delivery_system_descriptor Valid for: terrestrialro INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.12 |
mgNITDSConstellationThe modulation constellation: values as specified for the terrestrial_delivery_system_descriptor Valid for: terrestrialro INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.13 |
mgNITDSHierarchyInformationHierarchy Information: values as specified for the terrestrial_delivery_system_descriptor Valid for: terrestrialro INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.14 |
mgNITDSCodeRateHPStreamThe code rate for the high priority stream: values as specified for the terrestrial_delivery_system_descriptor Valid for: terrestrialro INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.15 |
mgNITDSCodeRateLPStreamThe code rate for low priority stream: values as specified for the terrestrial_delivery_system_descriptor Valid for: terrestrialro INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.16 |
mgNITDSGuardIntervalThe guard_interval: values as specified for the terrestrial_delivery_system_descriptor Valid for: terrestrialro INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.17 |
mgNITDSTransmissionModeThe transmission_mode: values as specified for the terrestrial_delivery_system_descriptor Valid for: terrestrialro INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.18 |
mgNITDSOtherFrequencyFlagother_frequency_flag: values as specified for the terrestrial_delivery_system_descriptor Valid for: terrestrialro INTEGER .1.3.6.1.4.1.2696.3.3.1.1.8.1.19 |
mgRFCharacteristics OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.1.2 |
mgRFCharacteristicsTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.1.2.1 |
rfTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.1.2.1.0 |
rfCharacteristicsChangeTrapTrap which is sent when a value in the mgRFCharacteristics part of the MIB changes substantially. Transmission of the trap is subject to rate control through the rfCharacteristicsTrapControlRateStatus object. NOTIFICATION-TYPE .1.3.6.1.4.1.2696.3.3.1.2.1.0.1 |
rfCharacteristicsTrapControlTablePer-input table of values which control the generation of rfCharacteristicsChangeTrap traps. SEQUENCE OF RfCharacteristicsTrapControlEntry .1.3.6.1.4.1.2696.3.3.1.2.1.1 |
rfCharacteristicsTrapControlEntryRow specification RfCharacteristicsTrapControlEntry .1.3.6.1.4.1.2696.3.3.1.2.1.1.1 |
rfCharacteristicsTrapControlInputNumberTransport Stream on which an RF value has changed, triggering the transmission of the trap. InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.2.1.1.1.1 |
rfCharacteristicsTrapControlOIDThis object holds the OID of the object within the rfCharacteristics branch of the MIB whose change triggered the trap. It is present for the formal purpose of defining the variable bindings returned with the rfCharacteristicsChangeTrap. It is not accessible for normal reading. Note that this may not be the only value which has changed; managers need to poll to obtain all the new values that they need.ro OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.1.2.1.1.1.2 |
rfCharacteristicsTrapControlChangeTimeThis indicates the time when the change which triggered the trap occurred. It is present for the formal purpose of defining the variable bindings returned with the rfCharacteristicsChangeTrap. It is not accessible for normal reading.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2696.3.3.1.2.1.1.1.3 |
rfCharacteristicsTrapControlRateStatusThis object is used for rate control of traps, preventing overload of the management network by transmission of an excessive number of traps. The value 'disabled' means that traps are never sent. The value 'enabled' means that a trap will be sent when triggered. When a trap is sent, the agent changes the value of this object to 'enabledThrottled'. In this state the agent will not send any more traps. The agent automatically changes the value back to 'enabled' when the time specified by trapControlPeriod expires. A management application may set the value to 'enabled' at any time, but must never set the value to 'enabledThrottled'.rw RateStatus (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.2.1.1.1.4 |
rfCharacteristicsTrapControlPeriodThe agent will ensure that the interval between sending traps is no shorter than this time period (unless overridden by the manager).rw Unsigned32 .1.3.6.1.4.1.2696.3.3.1.2.1.1.1.5 |
rfCharacteristicsTrapInputThe Transport Stream input whose change triggered the current trap. This information can also be obtained by analysing the rfCharacteristicsTrapOID, but rfCharacteristicsTrapInput provides the information directly. This object is present for the formal purpose of defining the variable bindings returned with the traps. It is not accessible for normal reading.ro InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.2.1.2 |
mgRFCharacteristicsTableThe RF characteristics of the input signal. These values represent the measuring instrument's 'best effort' to determine them. SEQUENCE OF MgRFCharacteristicsEntry .1.3.6.1.4.1.2696.3.3.1.2.2 |
mgRFCharacteristicsEntryRow specification MgRFCharacteristicsEntry .1.3.6.1.4.1.2696.3.3.1.2.2.1 |
mgRFInputNumberThe physical input on which these RF characteristics are found InputNumber (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.2.2.1.1 |
mgRFSystemTypeWhich delivery system is in use: cable, satellite or terrestrial. The value of this object determines which other objects in this table have valid values.ro DeliverySystemType (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.2.2.1.2 |
mgRFCentreFrequencyThis is the centre frequency to which the measuring equipment is tuned. This frequency is the actual input frequency to the measuring equipment, which may be at an intermediate frequency (IF) rather than the final RF. Valid for: cable, satellite, terrestrialro FloatingPoint UNITS "MHz" .1.3.6.1.4.1.2696.3.3.1.2.2.1.3 |
mgRFModulationThe modulation scheme in use Valid for: cable, satellite, terrestrialro Modulation (DVB-MGTR101290-MIB) .1.3.6.1.4.1.2696.3.3.1.2.2.1.4 |
mgRFFecInnerInner Forward Error Correction scheme (also referred to as code rate). In the case of a hierarchical terrestrial transmission, this is the inner code rate for the high priority stream. Valid for: satellite, terrestrialro InnerCodeRate .1.3.6.1.4.1.2696.3.3.1.2.2.1.5 |
mgRFFecInnerLPInner Forward Error Correction scheme (also referred to as code rate). This is the code rate for the low priority stream in a hierarchical terrestrial transmission. Valid for: terrestrialro InnerCodeRate .1.3.6.1.4.1.2696.3.3.1.2.2.1.6 |
mgRFSymbolRateIndicates the symbol rate of the transmission. Valid for: cable, satellitero FloatingPoint UNITS "Msymbol/s" .1.3.6.1.4.1.2696.3.3.1.2.2.1.7 |
mgRFBandwidthBandwidth of the signal. Normally this will be equivalent to the channel spacing. Valid for: terrestrialro FloatingPoint UNITS "MHz" .1.3.6.1.4.1.2696.3.3.1.2.2.1.8 |
mgRFTransmissionModeWhether there are 2k or 8k carriers in the OFDM modulation scheme. Valid for: terrestrialro TerrestrialTransmissionMode .1.3.6.1.4.1.2696.3.3.1.2.2.1.9 |
mgRFIsHierarchicalWhether the transmission is hierarchical Valid for: terrestrialro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2696.3.3.1.2.2.1.10 |
mgRFGuardIntervalThe guard interval in use Valid for: terrestrialro GuardInterval .1.3.6.1.4.1.2696.3.3.1.2.2.1.11 |
mgSignalCharacteristicsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.2 |
mgSignalCharacteristicsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.2.1 |
mgSCTransportStreamComplianceAn implementation which provides all the information in the mgTSStructure part of the MIB and implements the tsStructureChangeTrap can claim this conformance. Unknown .1.3.6.1.4.1.2696.3.3.2.1.1 |
mgSCRadioFrequencyComplianceAn implementation which provides all the information in the mgRFCharacteristics part of the MIB and implements the rfCharacteristicsChangeTrap can claim this conformance. Unknown .1.3.6.1.4.1.2696.3.3.2.1.2 |
mgSignalCharacteristicsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2696.3.3.2.3 |
mgSCTransportStreamGroupThis group contains all the objects in the mgTSStructure part of the MIB. Unknown .1.3.6.1.4.1.2696.3.3.2.3.1 |
mgSCRadioFrequencyGroupThis group contains all the objects in the mgRFCharacteristics part of the MIB Unknown .1.3.6.1.4.1.2696.3.3.2.3.2 |
mgSCTransportStreamTrapGroupContains tsStructureChangeTrap Unknown .1.3.6.1.4.1.2696.3.3.2.3.3 |
mgSCRadioFrequencyTrapGroupContains rfCharacteristicsChangeTrap Unknown .1.3.6.1.4.1.2696.3.3.2.3.4 |