DTRConcentratorMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DTRConcentratorMIB.
113
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
113 total| Object Name |
|---|
cisco OBJECT IDENTIFIER .1.3.6.1.4.1.9 |
RFC1155-SMI Unknown .1.3.6.1.4.1.9 |
catProd OBJECT IDENTIFIER .1.3.6.1.4.1.9.1 |
cat2600 OBJECT IDENTIFIER .1.3.6.1.4.1.9.1.111 |
cat2600Ts OBJECT IDENTIFIER .1.3.6.1.4.1.9.1.111.1 |
dtrMIBs OBJECT IDENTIFIER .1.3.6.1.4.1.9.1.111.1.3 |
dtrConcMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.1.111.1.3.1 |
dtrConcMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.1.111.1.3.1.1 |
dtrConcMIBBase OBJECT IDENTIFIER .1.3.6.1.4.1.9.1.111.1.3.1.1.1 |
dtrConcentratorAddressMAC address used by DTR Concentrator for uniqueness. It must
be uniquero MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.1.1 |
dtrOperNumberOfCrfsNumber of Concentrator Relay Functions within the DTR
Concentrator. Min value is 1. Writing this object sets the number
of CRFs within the DTR Concentrator.rw INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.1.2 |
dtrOperNumberOfBridgeRelaysNumber of bridge relay functions within the DTR Concentrator.
Value of 0 or 1 is permitted. Writing this object sets the number of bridge
relay functions within the DTR Concentrator.rw INTEGER(0 | 1) .1.3.6.1.4.1.9.1.111.1.3.1.1.1.3 |
dtrCRFTableThis table contains information for each concentrator relay
function in the DTR Concentrator. SEQUENCE OF DtrCRFEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6 |
dtrCRFEntry DtrCRFEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1 |
dtrCRFIndexThe CRF number identifying this instance of CRF INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1.1 |
dtrCRFNumberOfPortsThe number of CRF Ports controlled by this CRFro INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1.2 |
dtrCRFPortMaskThe set of interfaces (ifIndex) that are associated
with this instance of a CRF.
Each Octet within the value of this object specifies a set
of eight interfaces, with the first octet specifying
interfaces (ifIndex) 1 through 8, the second octet specifying
interfaces 9 through 16 and so on. Within each octet, the
most significant bit represents the lowest numbered interface,
and the least significant bit represents the highest numbered
interface.
Writing this variable will modify the CRF configuration and update
the value contained in dtrCRFNumberOfPorts.rw OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1.3 |
dtrCRFNameThe textual name of the CRF. The value of this obje should be the
name of the CRF as assigned by the DTR Concentrator and should
be suitable for use in commands entered at the DTR Concentrator 'console'ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1.4 |
dtrCRFMaxInfoThe maximum size of the INFO field that the CRF can
transmit/receivero INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1.5 |
dtrCRFMacAddressThe MAC address ised with the dtrCRFSpTreePriority to form
the CRF Identifier used in the spanning tree protocol. This
address must be unique and it is recommended that this
address be the specific MAC address of the lowest numbered
C-Port.ro MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1.6 |
dtrCRFLocalLanIdThis is the value of the local lan id used by the CRF. This value
may be assigned or may be learned by the CRF learning process.
Valid values range from 0 to 4095. Values outside this range
indicate that the lan id value has not been assigned or learned.rw INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1.7 |
dtrCRFFdbAgingTimeThe timeout period in seconds for aging out dynamic entries from
the Filtering Database. Recommended default is 300 seconds.rw INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1.8 |
dtrCRFMRIEnableThis object enables/disables the MRI function in the CRFrw Enumeration .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1.9 |
dtrCRFLearnedEntryDiscardsThe total number of CRF Filtering Database entries, which
have been or would have been learned, but have been discarded
due to a lack of space to store them in the Filtering
Databasero Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.1.6.1.10 |
dtrCRFPortTableThis table contains information for each CRF Port in a Concentrator
Relay Function SEQUENCE OF DtrCRFPortEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.1.7 |
dtrCRFPortEntry DtrCRFPortEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.1.7.1 |
dtrCRFPortCRFIndexThe CRF number identifying an instance of CRF INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.1.7.1.1 |
dtrCRFPortNumberThe CRF Port number for which this entry contains CRF
management information. INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.1.7.1.2 |
dtrCRFPortifIndexA unique value, greater than zero that corresponds to the
interface this CRF Port is assigned (corresponds to ifIndex).
Writing this object defines the correspondence between the
CRF Port and the interface (C-Port or bridge relay function
interface as determined by dtrCRFOperPortType.)rw InterfaceIndex -- Rsyntax Integer32 .1.3.6.1.4.1.9.1.111.1.3.1.1.1.7.1.3 |
dtrCRFPortEnableThe enable/disable status of the CRF Port. This control can be
used to disable a port.rw Enumeration .1.3.6.1.4.1.9.1.111.1.3.1.1.1.7.1.4 |
dtrCRFOperPortTypeIndicates the type of interface that this CRF Port is assigned to.
Only two types are permitted, a C-Port and an interal bridge
relay function.
Write this object to set the type of interface.ro IANAifType -- Rsyntax INTEGER { -- other(1), -- regular1822(2), -- hdh1822(3), -- ddnX25(4), -- rfc877x25(5), -- ethernetCsmacd(6), -- iso88023Csmacd(7), -- iso88024TokenBus(8), -- iso88025TokenRing(9), -- iso88026Man(10), -- starLan(11), -- proteon10Mbit(12), -- proteon80Mbit(13), -- hyperchannel(14), -- fddi(15), -- lapb(16), -- sdlc(17), -- ds1(18), -- e1(19), -- basicISDN(20), -- primaryISDN(21), -- propPointToPointSerial(22), -- ppp(23), -- softwareLoopback(24), -- eon(25), -- ethernet3Mbit(26), -- nsip(27), -- slip(28), -- ultra(29), -- ds3(30), -- sip(31), -- frameRelay(32), -- rs232(33), -- para(34), -- arcnet(35), -- arcnetPlus(36), -- atm(37), -- miox25(38), -- sonet(39), -- x25ple(40), -- iso88022llc(41), -- localTalk(42), -- smdsDxi(43), -- frameRelayService(44), -- v35(45), -- hssi(46), -- hippi(47), -- modem(48), -- aal5(49), -- sonetPath(50), -- sonetVT(51), -- smdsIcip(52), -- propVirtual(53), -- propMultiplexor(54) -- } .1.3.6.1.4.1.9.1.111.1.3.1.1.1.7.1.5 |
dtrCRFPortMtuExceededDiscardsThe number of frames discarded by the CRF Port due to excessive
size (exceeds CrfMaxInfo)ro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.1.7.1.6 |
dtrCRFPortDelayExceededDiscardsThe number of frames discarded by the CRF Port due to excessive
delay through the CRFro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.1.7.1.7 |
dtrConcMIBSpTree OBJECT IDENTIFIER .1.3.6.1.4.1.9.1.111.1.3.1.1.2 |
dtrSpanningTreeHoldTimeThe minimum time period, in seconds, elapsing between the
transmission of Configuration PDUs through a given port (CRFP
or internal bridge). This is a fixed parameter of the DTR
Concentrator used by all member CRF and bridge entities. Value
specified by 802.1d is 1 secondro Integer32 .1.3.6.1.4.1.9.1.111.1.3.1.1.2.1 |
dtrSpanningTreeProtocolSpecificationAn indication of what version of the Spanning Tree Protocol is
being run on the DTR Concentratorro Enumeration .1.3.6.1.4.1.9.1.111.1.3.1.1.2.2 |
dtrSpanningTreeTimeSinceTopoChangeThe time (in 1/100ths of a second) since the last topology
change was detected by the CRF or bridge entities within the
DTR Concentrator.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.1.111.1.3.1.1.2.3 |
dtrSpanningTreeTopologyChangesThe total number of topology changes detected by this
concentrator since the management entity was last reset or
initializedro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.2.4 |
dtrSpanningTreeBridgeForwardDelayThe value of the Forward Delay parameter when the entity (CRF or
bridge) is the Root or is attempting to become the Root. The
granularity of this timer is 1 second.rw Timeout .1.3.6.1.4.1.9.1.111.1.3.1.1.2.5 |
dtrSpanningTreeBridgeHelloTimeThe value of the Hello Time parameter when the entity (CRF or
Bridge) is the Root or attempting to become the Root. The time
interval between transmissions of Topology Change Notification
PDUs. The granularity of this timer is 1 second.rw Timeout .1.3.6.1.4.1.9.1.111.1.3.1.1.2.6 |
dtrSpanningTreeTreeBridgeMaxAgeThe value of the Max Age parameter when the entity (CRF or
bridge) is the Root or is attempting to become the Root.
The granularity of this timer is 1 second.rw INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.2.7 |
dtrCRFSpTreeTableThis table contains the spanning tree information for each CRF. SEQUENCE OF DtrCRFSpTreeEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.2.9 |
dtrCRFSpTreeEntry DtrCRFSpTreeEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.2.9.1 |
dtrCRFSpTreeCRFIndexThe CRF number identifying this instance of CRF INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.2.9.1.1 |
dtrCRFSpTreePriorityThe value of the write-able portion of the CRF Identifier and the
first two octets of the CRF Identifier. The last 6 octets of the
CRF ID are given by the value of dtrCRFMacAddress.rw INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.2.9.1.2 |
dtrCRFSpTreeDesignatedRootThe bridge identifier of the root of the spanning tree as
determined by the spanning tree protocol executed at this nodero BridgeId -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.2.9.1.3 |
dtrCRFSpTreeRootCostThe cost of the path to the root as seen from this CRFro Integer32 .1.3.6.1.4.1.9.1.111.1.3.1.1.2.9.1.4 |
dtrCRFSpTreeRootPortThe CRF Port number of the CRF Port which offers the lowest cost
path from this CRF to the rootro Integer32 .1.3.6.1.4.1.9.1.111.1.3.1.1.2.9.1.5 |
dtrCRFSpTreeMaxAgeThe maximum age of Spanning Tree Protocol information learned
from the network on any port (CRF or bridge within the DTR
Concentrator) before it is discarded. Units are in 1/100th of
a second. This is the actual value currently in usero Timeout -- Rsyntax INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.2.9.1.6 |
dtrCRFSpTreeHelloTimeThe amount of time between transmission of Configuration bridge
PDUs used by a CRF that is attempting to become the Root or is
the Root. This is the value currently in usero Timeout -- Rsyntax INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.2.9.1.7 |
dtrCRFSpTreeForwardDelayThis time value, measured in 1/100th of a second, is used to
control the amount of time spent in the Listening state when
moving from the Blocking state to the Listening state and the
amount of time in the Learning state when moving from the
Learning state to the Forwarding state. This time value is used
for ageing dynamic entries in the Filtering Database while the
Topology Change flag is set in protocol messages received from
the root. This is the value the CRF is currently usingro Timeout -- Rsyntax INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.2.9.1.8 |
dtrCRFPortSpTreeTableThis table contains spanning tree information for each CRF Port. SEQUENCE OF DtrCRFPortSpTreeEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10 |
dtrCRFPortSpTreeEntry DtrCRFPortSpTreeEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1 |
dtrCRFPortSpTreeCRFIndexThe CRF number identifying this instance of CRF INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1.1 |
dtrCRFPortSpTreeNumberThe CRF Port number for which this entry contains CRF
management information. INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1.2 |
dtrCRFPortSpTreePriorityThe value of the priority field which is contained in the
first byte of the CRF Port Identifier. The second byte of
the CRF Port Identifier is given by the value of CRF Port as
identified by dtrCRFPortSpTreeNumberrw INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1.3 |
dtrCRFPortSpTreeStateThe CRF Port state as defined by the Spanning Tree. If the DTR
concentrator detects that a port is malfunctioning, it will place
that port into the broken(6) state. the states are defined as:
disabled(1), blocking(2), listening(3), learning(4), forwarding(5),
and broken(6).ro Enumeration .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1.4 |
dtrCRFPortSpTreePathCostThe contribution of the path through this CRF Port,
identified by dtrCRFPortSpTreeNumber when the CRF Port is the
Root Port, to the total cost of the path to the Root for this
CRFrw INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1.5 |
dtrCRFPortSpTreeDesignatedRootThe unique bridge identifier of the bridge recorded as the Root
in the root identifier parameter of the Configuration PDUs
transmitted by the designated bridge for the LAN to which the
CRF Port is attached.ro BridgeId -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1.6 |
dtrCRFPortSpTreeDesignatedCostThe cost of the path to the Root offered by the Designated Port
on the LAN to which this CRF Port is attachedro Integer32 .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1.7 |
dtrCRFPortSpTreeDesignatedBridgeThe unique Bridge or CRF Identifier of the Bridge or CRF believed to be the
Designated Bridge for the LAN associated with the CRF Portro BridgeId -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1.8 |
dtrCRFPortSpTreeDesignatedPortThe Port Identifier of the Bridge or CRF port believed to be the
Designated Port for the LAN associated with the CRF Portro PortId -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1.9 |
dtrCRFPortSpTreeForwardTransitionsThe number of times this CRF Port, as identified by
dtrCRFPortSpTreeNumber, has transitioned from the Learning
state to the Forwarding Statero Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.2.10.1.10 |
dtrConcMIBForwarding OBJECT IDENTIFIER .1.3.6.1.4.1.9.1.111.1.3.1.1.3 |
dtrFdbDynamicAddrTableThis table contains information about specific dynamic MAC address
entries in the CRF Filtering Database. SEQUENCE OF DtrFdbDynamicAddrEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.3.1 |
dtrFdbDynamicAddrEntryCRF Filtering Database Dynamic MAC address entry DtrFdbDynamicAddrEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.3.1.1 |
dtrFdbDynamicAddrCRFIndexThe CRF number identifying this instance of CRF INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.3.1.1.1 |
dtrFdbDynamicAddrStnAddressA unicast MAC address for which the CRF has forwarding
information. This object is updated by the Learning Process in
the CRF. MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.3.1.1.2 |
dtrFdbDynamicAddrPortNumberThe CRF Port number of the CRF Port that a frame with an
address matching dtrFdbDynamicAddrStnAddress in this
dtrFdbDynamicAddrTable Entry has been seen. A value of zero
is assigned when dtrFdbDynamicAddrStnAddress is known, but
the CRF Port number (dtrFdbDynamicAddrPortNumber) has not
been learned.ro INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.3.1.1.3 |
dtrFdbDynamicAddrStatusStatus of this entry. Other (1) indicates that some other
MIB object is being used to determine how/if the frame is
forwarded. Invalid(2) indicates this entry is no longer
valid, but has not been flushed from the table. Learned(3)
indicates that dtrFdbDynamicAddrPortNumber for this entry was
learned. Self(4) indicates dtrFdbDynamicAddrStnAddress
represents one of the CRF Port Addresses. Mgmt(5) indicates
dtrFdbDynamicAddrStnAddress is also a value of an existing
dtrFdbStaticAddrStnAddressro DynamicFdbStatus -- Rsyntax INTEGER { -- other(1), -- invalid(2), -- learned(3), -- self(4), -- mgmt(5) -- } .1.3.6.1.4.1.9.1.111.1.3.1.1.3.1.1.4 |
dtrFdbStaticAddrTableThis table contains information about specific static MAC address
entries in the CRF Filtering Database. SEQUENCE OF DtrFdbStaticAddrEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.3.2 |
dtrFdbStaticAddrEntryCRF Filtering Database Static MAC Address Entry DtrFdbStaticAddrEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.3.2.1 |
dtrFdbStaticAddrCRFIndexThe CRF number identifying this instance of CRF INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.3.2.1.1 |
dtrFdbStaticAddrStnAddressThe MAC address for this entry. It may include group or broadcast
addresses. MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.3.2.1.2 |
dtrFdbStaticAddrRowStatusAllows creation and deletion of static entries.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.9.1.111.1.3.1.1.3.2.1.3 |
dtrFdbStaticAddrInMaskThe set of CRF Ports which receive frames with a
destination address matching the address specified by the
DtrFdbStaticAddrStnAddress in this entry that may forward
this frame to any output CRF Port indicated by
DtrFdbStaticAddrOutMask. Each octet within the value of this
object specifies a set of eight ports, with the first octet
specifying CRF Ports 1 through 8, the second octet specifying
CRF Ports 9 through 16 and so on. Within each octet, the
most significant bit represents the lowest numbered port,
and the least significant bit represents the highest numbered
port.rw OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.3.2.1.4 |
dtrFdbStaticAddrOutMaskThe set of CRF Ports to which frames with a destination
address matching the address specified by the
DtrFdbStaticAddrStnAddress in this entry may be forwarded to.
Each octet within the value of this object specifies a set of
eight ports, with the first octet specifying CRF Ports 1
through 8, the second octet specifying CRF Ports 9 through 16
and so on. Within each octet, the most significant bit
represents the lowest numbered port, and the least
significant bit represents the highest numbered port.rw OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.3.2.1.5 |
dtrFdbStaticAddrStatusStatus of this entry. Other(1) indicates this entry is currently
in use under conditions different from the available status
definitions that follow. Invalid(2) indicates this entry is no
longer valid, but has not been flushed from the table. Writing
this value to the object removes the entry. Permanent(3) indicates
that the entry is currently in use and will remain so after the
next reset. DeleteOnReset(4) indicates the entry is currently in
use and will remain so until the next reset.ro StaticFdbStatus -- Rsyntax INTEGER { -- other(1), -- invalid(2), -- permanent(3), -- deleteOnReset(4) -- } .1.3.6.1.4.1.9.1.111.1.3.1.1.3.2.1.6 |
dtrFdbDynamicRDTableThis table contains information about a specific dynamic route
descriptor entry in the CRF Filtering Database. SEQUENCE OF DtrFdbDynamicRDEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.3.3 |
dtrFdbDynamicRDEntry DtrFdbDynamicRDEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.3.3.1 |
dtrFdbDynamicRDCRFIndexThe CRF number identifying this instance of CRF INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.3.3.1.1 |
dtrFdbDynamicRDRouteDescA Route Descriptor for which the CRF has forwarding
information. The Route Descriptor (RD) consists of 2 parts; a 4
bit Bridge Number and a 12 bit LAN ID. This identifies a bridge
(BN) that has a port on the local LAN and a port connected to the
indicated LAN ID. This object consists of 3 octets. The first
octet contains the BN in the 4 least significant bits. The
second octet contains the most significant octet of the LAN ID
and the final octet contains the least significant 4 bits of the
LAN ID in the 4 most significant bits of the octet. RouteDescriptor -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.3.3.1.2 |
dtrFdbDynamicRDPortNumberThe CRF Port number of the CRF Port that a frame with a
Route Descriptor matching dtrFdbDynamicRDRouteDesc in this
DtrFdbDynamicRDEntry has been seen. A value of zero is
assigned when dtrFdbDynamicRDRouteDesc is known, but the CRF
Port number has not been learnedro INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.3.3.1.3 |
dtrFdbDynamicRDStatusStatus of this entry. Other (1) indicates that some other
MIB object is being used to determine how/if the frame is
forwarded. Invalid (2) indicates this entry is no longer
valid, but has not been flushed from the table. Learned (3)
indicates that dtrFdbDynamicRDPortNumber for this entry was
learned. Self(4) indicates dtrFdbDynamicRDRouteDesc
represents a relay across the Bridge relay function of this
DTR Concentrator. Mgmt(5) indicates dtrFdbDynamicRDRouteDesc
is also a value of an existing dtrFdbStaticRDRouteDesc in the
dtrFdbStaticRDTable.ro DynamicFdbStatus -- Rsyntax INTEGER { -- other(1), -- invalid(2), -- learned(3), -- self(4), -- mgmt(5) -- } .1.3.6.1.4.1.9.1.111.1.3.1.1.3.3.1.4 |
dtrFdbStaticRDTableA table containing information about specific static route
descriptor entries in the CRF Filtering Database. SEQUENCE OF DtrFdbStaticRDEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.3.5 |
dtrFdbStaticRDEntry DtrFdbStaticRDEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.3.5.1 |
dtrFdbStaticRDCRFIndexThe CRF number identifying this instance of CRF INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.3.5.1.1 |
dtrFdbStaticRDRouteDescStatic Entries contain route descriptor information for
internal Bridge Ports. These entries are added as part of the
initialization of the DTR Concentrator when an internal bridge
relay function is enabled (dtrOperNumberOfBridgeRelays=1)
The Route Descriptor (RD) consists of 2 parts; a
4 bit Bridge Number and a 12 bit LAN ID. This identifies a
bridge (BN) that has a port on the local LAN and a port
connected to the indicated LAN ID. This object consists of 3
octets. The first octet contains the BN in the 4 least
significant bits. The second octet contains the most
significant octet of the LAN ID and the final octet contains
the least significant 4 bits of the LAN ID in the 4 most
significant bits of the octet. RouteDescriptor -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.3.5.1.2 |
dtrFdbStaticRDRowStatusAllows creation and deletion of static entriesrw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.9.1.111.1.3.1.1.3.5.1.3 |
dtrFdbStaticRDPortNumberThe CRF Port number of the CRF Port that a frame with a
Route Descriptor matching dtrFdbStaticRDRouteDesc in this
DtrFdbStaticRDEntry is forwarded to.rw INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.3.5.1.4 |
dtrFdbStaticRDStatusStatus of this entry. Other (1) indicates this entry is currently
in use under conditions different from the available status
definitions that follow. Invalid(2) indicates this entry is no
longer valid, but has not been flushed from the table. Writing
this value to the object removes the entry. Permanent (3) indicates
that the entry is currently in use and will remain so after the next
reset. DeleteOnReset(4) indicates the entry is currently in use and
will remain so until the next reset.rw StaticFdbStatus -- Rsyntax INTEGER { -- other(1), -- invalid(2), -- permanent(3), -- deleteOnReset(4) -- } .1.3.6.1.4.1.9.1.111.1.3.1.1.3.5.1.5 |
dtrConcMIBMRI OBJECT IDENTIFIER .1.3.6.1.4.1.9.1.111.1.3.1.1.4 |
dtrMRITableThis table contains information about the CRF port out
mask for specific management functions. SEQUENCE OF DtrMRIEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.4.1 |
dtrMRIEntry DtrMRIEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.4.1.1 |
dtrMRICRFIndexThe CRF number identifying this instance of CRF INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.4.1.1.1 |
dtrMRIMgmtTypeIdentifies the function class for this entry. The MRI
forwards frames with a destination class equal to
dtrMRIMgmtType using the corresponding mask entry
(dtrMRIOutMask). When the destination class is 0 and the
source class is not 0, the destination address in the MAC
frame is used to forward the frame. MAC frames with a
destination class not found in this table are not forwarded
by the MRI. INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.4.1.1.2 |
dtrMRIOutMaskThe set of CRF Ports to which frames with a destination
class matching the function class specified by the
dtrMRIMgmtType in this entry may be forwarded to. Each octet
within the value of this object specifies a set of eight
ports, with the first octet specifying CRF Ports 1 through 8,
the second octet specifying CRF Ports 9 through 16 and so on.
Within each octet, the most significant bit represents the
lowest numbered port, and the least significant bit
represents the highest numbered port.rw OCTET STRING .1.3.6.1.4.1.9.1.111.1.3.1.1.4.1.1.3 |
dtrConcMIBStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.1.111.1.3.1.1.5 |
dtrCRFPortStatsTableThis table contains the counters for each CRF Port. SEQUENCE OF DtrCRFPortStatsEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1 |
dtrCRFPortStatsEntry DtrCRFPortStatsEntry .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1 |
dtrCRFPortStatsCRFIndexThe CRF number identifying this instance of CRF INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.1 |
dtrCRFPortStatsPortNumberThe CRF Port number for which this entry contains CRF
management information. When the dtrCrfOperPortType
indicates a C-Port, the C-Port number is found in
dtrCRFPortConfigCPort. INTEGER .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.2 |
dtrCRFPortStatsAreInFramesThe number of ARE frames received at this CRF Port. This
count does not include ARE frames that have been misdirected
(final Lan Id does not match the local Lan Id maintained by
the CRF (dtrCRFLocalLanId))ro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.3 |
dtrCRFPortStatsAreOutFramesThe number of ARE frames transmitted by this CRF Port.
This count does not include ARE frames that have been
misdirected (final Lan Id does not match the Local Lan Id
maintained by the CRF (dtrCRFLocalLanId))ro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.4 |
dtrCRFPortStatsInFramesThe number of valid frames received by this CRF Portro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.5 |
dtrCRFPortStatsOutFramesThe number of frames that have been transmitted by this
CRF Port.ro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.6 |
dtrCRFPortStatsSrfInFramesThe number of SRF frames that have been received by this
CRF Port and forwarded to another port on the CRF.ro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.7 |
dtrCRFPortStatsSrfOutFramesThe number of SRF frames that have been transmitted by this
CRF Port.ro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.8 |
dtrCRFPortStatsSteInFramesThe number of STE frames received at this CRF Port. This
count does not include STE frames that have been misdirected
(final Lan Id does not match the local Lan Id maintained by
the CRF (dtrCRFLocalLanId)).ro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.9 |
dtrCRFPortStatsSteOutFramesThe number of STE frames transmitted by this CRF Port.
This count does not include STE frames that have been
misdirected (final Lan Id does not match the local Lan Id
maintained by the CRF (dtrCRFLocalLanId)).ro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.10 |
dtrCRFPortStatsInvalidRICount of frames that were discarded due to a formatting error (i.e.
an odd RI length, or 0 RI length) (Reference 802.1d C4.2.1.1.3)ro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.11 |
dtrCRFPortStatsInMisdirectedThis is a count of source routed frames that have been
received at this CRF Port where the local Lan Id
(dtrCRFLocalLanId) is not present or is not last (explorer
frame). Explorer frames (ARE and STE) are broadcast to all
Forwarding CRF Ports. SRF frames are discarded if the DA is
specific and they are broadcast if the DA is multicast.ro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.12 |
dtrCRFPortStatsInDiscardsThe number of frames that have been discarded by the Forwarding
Process. This count may include frames that are discarded by the
Frame Reception processro Counter32 .1.3.6.1.4.1.9.1.111.1.3.1.1.5.1.1.13 |