DMswitch-MIB
AI MIB Summary
The DMswitch-MIB module provides SNMP-based monitoring and management capabilities for DMswitch network switching hardware, exposing standard interface statistics, port states, and device operational parameters. It enables administrators to track traffic counters, link status changes, and system health metrics essential for maintaining switch performance and availability.
The MIB module for DMswitch.
Main OID:
dmSwitchMIB.1.3.6.1.4.1.3709.3.5.201
492
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
492 total| Object Name |
|---|
dmSwitchMIBThe MIB module for DMswitch. MODULE-IDENTITY .1.3.6.1.4.1.3709.3.5.201 |
dmSwitchMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1 |
switchMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.1 |
switchNumberThe total number of switches present on this system.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.1 |
switchInfoTableTable of descriptive and status information about
switches in this system. SEQUENCE OF SwitchInfoEntry .1.3.6.1.4.1.3709.3.5.201.1.1.2 |
switchInfoEntryAn entry in the table, containing information
about a single switch in this system. SwitchInfoEntry .1.3.6.1.4.1.3709.3.5.201.1.1.2.1 |
swUnitIndexThis object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.1 |
swHardwareVerHardware version of the main board.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.2 |
swBootLoaderVerLoader version of the main board.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.3 |
swFirmwareVerOperation code version of the main board.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.4 |
swPortNumberThe total port number of this switch
(including expansion slot).ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.5 |
swPowerStatusIndicates the switch using internalPower(1),
redundantPower(2), internalAndRedundantPower(3) or externalPower(4)ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.6 |
swRoleInSystemIndicates the switch is master(1), backupMaster(2)
or slave(3) in this system.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.7 |
swSerialNumberSerial number of the switch.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.8 |
swProdNamero DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.9 |
swProdModelIdProduct model identifier.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.10 |
swFirmwareReleaseDateRelease date of the firmware.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.11 |
swTemperatureTemperature of the switch.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.12 |
swG704IntfNumberThe number of G704 interfaces of this switch.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.13 |
swE1cIntfNumberThe number of E1c interfaces of this switch.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.14 |
swBundleIntfNumberThe number of Bundle interfaces of this switch.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.15 |
swPtpIntfNumberThe number of PTP interfaces of this switch.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.16 |
swSdhIntfNumberThe number of SDH interfaces of this switch.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.17 |
swVC4NumberThe number of VC4 interfaces of this switch.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.18 |
swVC12NumberThe number of VC12 interfaces of this switch.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.2.1.19 |
switchProductId OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.1.3 |
swProdManufacturerro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.3.2 |
swProdDescriptionro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.3.3 |
swProdUrlro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.3.5 |
swIdentifierA unique identifier of which switch in the chassis is currently
being looked at.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.1.3.6 |
swVendorIdVendor information. The value 0
indicates a vendor not defined.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.3.7 |
switchIndivPowerTableTable about status of individual powers. SEQUENCE OF SwitchIndivPowerEntry .1.3.6.1.4.1.3709.3.5.201.1.1.4 |
switchIndivPowerEntryTable about status of individual powers. SwitchIndivPowerEntry .1.3.6.1.4.1.3709.3.5.201.1.1.4.1 |
swIndivPowerUnitIndexThis is defined as swUnitIndex.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.4.1.1 |
swIndivPowerIndex1 means internal power. 2 means external power.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.1.4.1.2 |
swIndivPowerStatusnotPresent(3) means not present. green(2) means
up. red(1) means down.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.4.1.3 |
switchIndivFanTableTable about status of individual fans. SEQUENCE OF SwitchIndivFanEntry .1.3.6.1.4.1.3709.3.5.201.1.1.5 |
switchIndivFanEntryTable about status of individual fans. SwitchIndivFanEntry .1.3.6.1.4.1.3709.3.5.201.1.1.5.1 |
swIndivFanUnitIndexThis is defined as swUnitIndex.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.5.1.1 |
swIndivFanIndexro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.1.5.1.2 |
swIndivFanStatusred(1) means down. green(2) means
up.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.5.1.3 |
switchIndivAlarmTableTable about status of individual alarms. SEQUENCE OF SwitchIndivAlarmEntry .1.3.6.1.4.1.3709.3.5.201.1.1.6 |
switchIndivAlarmEntryTable about status of individual alarms. SwitchIndivAlarmEntry .1.3.6.1.4.1.3709.3.5.201.1.1.6.1 |
swIndivAlarmUnitIndexThis is defined as swUnitIndex.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.6.1.1 |
swIndivAlarmIndexro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.1.6.1.2 |
swIndivAlarmStatusro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.6.1.3 |
switchResObjrw Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.7 |
swHashConfigro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.8 |
swHashStatusro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.9 |
swCpuUsageThe CPU usage (in hundredths of a percent) at the last minute.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.10 |
swMemUsageThe memory usage (percentage).ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.11 |
switchMacAddrUsageTableTable about the total of used MAC addresses entries. SEQUENCE OF SwitchMacAddrUsageEntry .1.3.6.1.4.1.3709.3.5.201.1.1.12 |
switchMacAddrUsageEntryTable about the total of used MAC addresses entries. SwitchMacAddrUsageEntry .1.3.6.1.4.1.3709.3.5.201.1.1.12.1 |
swMacAddrUnitIndexThis is defined as swUnitIndex. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.12.1.1 |
swMacAddrUsageValueThe total of used MAC addresses entries.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.12.1.2 |
swSlotNumberThe total number of interface board slots present on the device.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.13 |
switchMpuTableTable of descriptive and status information about
MPUs in this system. SEQUENCE OF SwitchMpuEntry .1.3.6.1.4.1.3709.3.5.201.1.1.14 |
switchMpuEntryAn entry in the table, containing information
about a single MPU in this system. SwitchMpuEntry .1.3.6.1.4.1.3709.3.5.201.1.1.14.1 |
swMpuIndexThis object identifies the MPU within the system
for which this entry contains information.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.14.1.1 |
swMpuBootLoaderVerLoader version of the main board.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.14.1.2 |
swMpuRoleInSystemIndicates the MPU is active(1) or standby(2) in this system.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.14.1.3 |
swMpuSerialNumberSerial number of the MPU.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.14.1.4 |
swMpuModelIdMPU model identifier.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.14.1.5 |
swHashHardwarero DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.15 |
switchIndivAlarmOutTableTable about status of output alarms. SEQUENCE OF SwitchIndivAlarmOutEntry .1.3.6.1.4.1.3709.3.5.201.1.1.16 |
switchIndivAlarmOutEntryTable about status of output alarms. SwitchIndivAlarmOutEntry .1.3.6.1.4.1.3709.3.5.201.1.1.16.1 |
swIndivAlarmOutUnitIndexThis is defined as swUnitIndex.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.16.1.1 |
swIndivAlarmOutStatusIndicates current alarm output status, as configured in external-alarm-output.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.16.1.2 |
swChassisModelChassis model for equipmentro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.1.17 |
switchSessionTableTable about CLI sessions informations. SEQUENCE OF SwitchSessionEntry .1.3.6.1.4.1.3709.3.5.201.1.1.18 |
switchSessionEntryAn entry in the table, containing information
about a single switch in this system. SwitchSessionEntry .1.3.6.1.4.1.3709.3.5.201.1.1.18.1 |
swSessionUnitIndexThis is defined as swUnitIndex. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.1.18.1.1 |
swSessionNameSession username.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.18.1.2 |
swSessionUptimeLogin time and date (uptime).ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.18.1.3 |
swSessionPidCLI Session Process ID.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.1.18.1.4 |
swSessionSrcIPIP from process that called CLI - telnet, ssh or inetd.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.1.18.1.5 |
portMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.2 |
portTableTable of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel). SEQUENCE OF PortEntry .1.3.6.1.4.1.3709.3.5.201.1.2.1 |
portEntryAn entry in the table, containing information
about configuration in one switch port of the switch. PortEntry .1.3.6.1.4.1.3709.3.5.201.1.2.1.1 |
portIndexThis is defined as ifIndex in the IF-MIB. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.1 |
portNameIndicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later).rw DisplayString .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.2 |
portTypeIndicates the port type.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.3 |
portSpeedDpxCfgSet the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
fullDuplex10000(8) - 10000Mbps and full duplex mode
hundredBaseTX port can be set as
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as
halfDuplex100(4)
fullDuplex100(5)
thousandBaseSX port can be set as
halfDuplex1000(6)
fullDuplex1000(7)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.4 |
portFlowCtrlCfg(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(3) Flow control mechanism is backPressure.
when the port is in fullDuplex mode.This flow control
mechanism will not function.
(4) Flow control mechanism is IEEE 802.3x flow control.
when the port is in halfDuplex mode.This flow control
mechanism will not function.
hundredBaseTX and thousandBaseSX port can be set as:
enabled(1),
disabled(2),
backPressure(3),
dot3xFlowControl(4).
hundredBaseFX port can be set as:
enabled(1),
disabled(2),
backPressure(3).
The actual flow control mechanism is used given by
portFlowCtrlStatus.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.5 |
portCapabilitiesPort capabilities.rw Bits .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.6 |
portAutonegotiationWhether autonegotiation is enabled.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.7 |
portSpeedDpxStatusThe operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this value is
error(1).ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.8 |
portFlowCtrlStatus(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, this value is
error(1).ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.9 |
portMdiStatusro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.10 |
portTrunkIndexThe trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to trunk at trunkIndex, defined by the
corresponding trunkPorts.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.2.1.1.11 |
trunkMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.3 |
trunkMaxIdThe maximum number for a trunk identifier.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.3.1 |
trunkValidNumberThe number of valid trunks.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.3.2 |
trunkTableTable of descriptive and status information about
configuration of each trunk,
similar to Cisco EtherChannel. SEQUENCE OF TrunkEntry .1.3.6.1.4.1.3709.3.5.201.1.3.3 |
trunkEntryAn entry in the table, containing information
about configuration in one trunk of the switch. TrunkEntry .1.3.6.1.4.1.3709.3.5.201.1.3.3.1 |
trunkIndexThis object identifies the trunk within the switch
for which this entry contains information. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.3.3.1.1 |
trunkPortsThe complete set of ports currently associated with
this trunk.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.3709.3.5.201.1.3.3.1.2 |
trunkCreationA value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.3.3.1.3 |
trunkStatusWriting this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.3.3.1.4 |
lacpMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.4 |
lacpPortTableTable for LACP port configuration. SEQUENCE OF LacpPortEntry .1.3.6.1.4.1.3709.3.5.201.1.4.1 |
lacpPortEntryEntry for LACP port configuration. LacpPortEntry .1.3.6.1.4.1.3709.3.5.201.1.4.1.1 |
lacpPortIndexThis is defined as ifIndex in the IF-MIB. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.4.1.1.1 |
lacpPortStatusWhether 802.3ad LACP is enabled.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.4.1.1.2 |
staMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.5 |
staSystemStatusGlobal spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.3709.3.5.201.1.5.1 |
staPortTableThe table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType. SEQUENCE OF StaPortEntry .1.3.6.1.4.1.3709.3.5.201.1.5.2 |
staPortEntryThe conceptual entry of staPortTable. StaPortEntry .1.3.6.1.4.1.3709.3.5.201.1.5.2.1 |
staPortIndexThe port and the trunk (excluding trunk member ports)
interface of the staPortTable. The interface identified
by a particular value of this index is the same interface
as identified by the same value of dot1dStpPort in the
BRIDGE-MIB. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.5.2.1.1 |
staPortAdminEdgePortThe administrative value of the edge port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port and a value of false(2) indicates
that this port should be assumed as a non-edge-port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.5.2.1.2 |
staPortOperEdgePortThe operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.5.2.1.3 |
staPortAdminPointToPointThe administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.5.2.1.4 |
staPortOperPointToPointThe operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.5.2.1.5 |
staPortLongPathCostThe contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated.rw Integer32 .1.3.6.1.4.1.3709.3.5.201.1.5.2.1.6 |
staPortSystemStatusPer-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.3709.3.5.201.1.5.2.1.7 |
staProtocolTypeThe version of Spanning Tree Protocol the bridge is currently
running. The value 'stp(1)' indicates the Spanning Tree
Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that
the Rapid Spanning Tree Protocol is as specified in IEEE
802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning
Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the
protocol become available.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.5.3 |
tftpMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.6 |
tftpFileThe file name for TFTP transfer when a
transfer is next requested via this MIB. This value is set to
the zero length string when no file name has been specified.rw DisplayString .1.3.6.1.4.1.3709.3.5.201.1.6.1 |
tftpFlashConfigNumber of flash config partition for to be used when the chosen action
is the downloadToFlashConfig or the uploadFromFlashConfig. This values is
set to the zero when no flash config has been specified.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.6.2 |
tftpServerThe IP address of the TFTP server for transfer
when a download or upload is next requested via this MIB.
This value is set to `0.0.0.0' when no IP address has been
specified.rw IpAddress .1.3.6.1.4.1.3709.3.5.201.1.6.3 |
tftpActionWhen this object is set to downloadToFlashConfig(1),
the device will begin download of the file specified
by tftpFile from the server specified by tftpServer to
flash-config(specified by tftpFlashConfig) in the device
using the TFTP protocol.
When this object is set to downloadToRunningConfig(2),
the device will begin download of the file specified
by tftpFile from the server specified by tftpServer to
running-config in the device using the TFTP protocol.
When this object is set to downloadToStartupConfig(3),
the device will begin download of the file specified
by tftpFile from the server specified by tftpServer to
Startup-config in the device using the TFTP protocol.
When this object is set to downloadToFirmware(4),
the device will begin download of the file specified
by tftpFile from the server specified by tftpServer to
firmware in the device using the TFTP protocol.
When this object is set to uploadFromFlashConfig(5),
the device will begin upload of the
flash-config(specified by tftpFlashConfig) in the device
to tftpFile in the server specified by tftpServer.
When this object is set to uploadFromRunningConfig(6),
the device will begin upload of the running-config in
the device to tftpFile in the server specified by tftpServer.
When this object is set to uploadFromStartupConfig(7),
the device will begin upload of the startup-config in
the device to tftpFile in the server specified by
tftpServer.
When the device is not downloading, this object will have
a value of notDownloading(8).rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.6.4 |
restartMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.7 |
restartFirmwareNumber of firmware flash index for start-up.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.7.1 |
restartConfigNumber of configuration flash index for start-up.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.7.2 |
restartControlSetting this object to warmBoot(2) causes the device to
restart the application software with current configuration
parameters saved in non-volatile memory. Setting this
object to coldBoot(3) causes the device to reinitialize
configuration parameters in non-volatile memory to default
values and restart the application software. When the device
is running normally, this variable has a value of
running(1).rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.7.3 |
mirrorMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.8 |
mirrorDestinationPortDestination port for mirrored packets. This is defined
as ifIndex in the IF-MIB.rw Integer32 .1.3.6.1.4.1.3709.3.5.201.1.8.1 |
mirrorTableTable of descriptive and status information about
switches in this system. SEQUENCE OF MirrorEntry .1.3.6.1.4.1.3709.3.5.201.1.8.2 |
mirrorEntryAn entry in the table, containing information
about a single switch in this system. MirrorEntry .1.3.6.1.4.1.3709.3.5.201.1.8.2.1 |
mirrorSourcePortSource port for mirrored packets. This is defined as
ifIndex in the IF-MIB. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.8.2.1.1 |
mirrorTypeIf this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is all(3),
all packts will be mirroredrw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.8.2.1.2 |
igmpSnoopMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.9 |
igmpSnoopStatusParameter to enable or disable IGMP snooping on the device.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.9.1 |
igmpSnoopQuerierWhether to act as querier.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.9.2 |
igmpSnoopQueryCountMaximum number of queries that have not been heard on the
system before the system starts taking action to solicit
reports.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.9.3 |
igmpSnoopQueryIntervalQuery interval.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.9.4 |
igmpSnoopQueryMaxResponseTimeTimeout value (seconds) between IGMP reports received on a port
for an IP Multicast Address that can pass before the system
sends an IGMP Query out the port and removes it from the
list.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.9.5 |
igmpSnoopQueryTimeoutQuery time-out.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.9.6 |
igmpSnoopVersionVersion.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.9.7 |
igmpSnoopRouterCurrentTableTable for current router ports. SEQUENCE OF IgmpSnoopRouterCurrentEntry .1.3.6.1.4.1.3709.3.5.201.1.9.8 |
igmpSnoopRouterCurrentEntryEntry for current router ports. IgmpSnoopRouterCurrentEntry .1.3.6.1.4.1.3709.3.5.201.1.9.8.1 |
igmpSnoopRouterCurrentVlanIndexThis is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Unsigned32 .1.3.6.1.4.1.3709.3.5.201.1.9.8.1.1 |
igmpSnoopRouterCurrentPortsThe set of ports which are current router ports.
Within this list, some router ports are static router ports.
Please refer to igmpSnoopRouterStaticTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.3709.3.5.201.1.9.8.1.2 |
igmpSnoopRouterStaticTableTable for static router ports. SEQUENCE OF IgmpSnoopRouterStaticEntry .1.3.6.1.4.1.3709.3.5.201.1.9.9 |
igmpSnoopRouterStaticEntryEntry for static router ports. IgmpSnoopRouterStaticEntry .1.3.6.1.4.1.3709.3.5.201.1.9.9.1 |
igmpSnoopRouterStaticVlanIndexThis is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Unsigned32 .1.3.6.1.4.1.3709.3.5.201.1.9.9.1.1 |
igmpSnoopRouterStaticPortsThe set of ports which are static router ports.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.3709.3.5.201.1.9.9.1.2 |
igmpSnoopMulticastCurrentTableTable for current multicast addresses. SEQUENCE OF IgmpSnoopMulticastCurrentEntry .1.3.6.1.4.1.3709.3.5.201.1.9.10 |
igmpSnoopMulticastCurrentEntryEntry for current multicast addresses. IgmpSnoopMulticastCurrentEntry .1.3.6.1.4.1.3709.3.5.201.1.9.10.1 |
igmpSnoopMulticastCurrentVlanIndexThis is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Unsigned32 .1.3.6.1.4.1.3709.3.5.201.1.9.10.1.1 |
igmpSnoopMulticastCurrentIpAddressIP address of multicast group. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.9.10.1.2 |
igmpSnoopMulticastCurrentPortsThe set of ports which are members.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.3709.3.5.201.1.9.10.1.3 |
igmpSnoopMulticastStaticTableTable for static multicast addresses. SEQUENCE OF IgmpSnoopMulticastStaticEntry .1.3.6.1.4.1.3709.3.5.201.1.9.11 |
igmpSnoopMulticastStaticEntryEntry for static multicast addresses. IgmpSnoopMulticastStaticEntry .1.3.6.1.4.1.3709.3.5.201.1.9.11.1 |
igmpSnoopMulticastStaticVlanIndexThis is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Unsigned32 .1.3.6.1.4.1.3709.3.5.201.1.9.11.1.1 |
igmpSnoopMulticastStaticIpAddressIP address of multicast group. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.9.11.1.2 |
igmpSnoopMulticastStaticPortsThe set of ports which are static members.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.3709.3.5.201.1.9.11.1.3 |
ipMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.10 |
ipAddressModerw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.10.1 |
ipDefaultGatewayThe IP Address of the default gateway. If this value is
undefined or unknown, it shall have the value 0.0.0.0.rw IpAddress .1.3.6.1.4.1.3709.3.5.201.1.10.2 |
ipPrimaryDnsServerThe IP Address of the primary DNS server. If this value is
undefined or unknown, it shall have the value 0.0.0.0.rw IpAddress .1.3.6.1.4.1.3709.3.5.201.1.10.3 |
ipSecondaryDnsServerThe IP Address of the secondary DNS server. If this value is
undefined or unknown, it shall have the value 0.0.0.0.rw IpAddress .1.3.6.1.4.1.3709.3.5.201.1.10.4 |
ipHttpStateWhether HTTP is enabled.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.10.5 |
ipHttpPortThe port number for HTTP.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.10.6 |
ipHttpsStateWhether HTTPS is enabled.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.10.7 |
ipHttpsPortThe port number for HTTPS.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.10.8 |
ipTelnetStateWhether telnet is enabled.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.10.9 |
bcastStormMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.11 |
bcastStormTableTable of descriptive and status information about
configuration of each switch ports(including expansion slot)
in this system. SEQUENCE OF BcastStormEntry .1.3.6.1.4.1.3709.3.5.201.1.11.1 |
bcastStormEntryAn entry in the table, containing information
about configuration in one switch port of the switch. BcastStormEntry .1.3.6.1.4.1.3709.3.5.201.1.11.1.1 |
bcastStormIfIndexThis is defined as ifIndex in the IF-MIB. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.11.1.1.1 |
bcastStormStatusWhether broadcast storm protection is enabled.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.11.1.1.2 |
bcastStormPacketRateBroadcast storm threshold as packets per second.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.11.1.1.3 |
vlanMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.12 |
vlanTableTable for VLAN configuration. SEQUENCE OF VlanEntry .1.3.6.1.4.1.3709.3.5.201.1.12.1 |
vlanEntryEntry for VLAN configuration. VlanEntry .1.3.6.1.4.1.3709.3.5.201.1.12.1.1 |
vlanIndexSame is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface. Unsigned32 .1.3.6.1.4.1.3709.3.5.201.1.12.1.1.1 |
vlanAddressMethodMethod to get the IP address.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.12.1.1.2 |
priorityMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.13 |
prioWrrTableTable for weighted round robin (WRR). SEQUENCE OF PrioWrrEntry .1.3.6.1.4.1.3709.3.5.201.1.13.1 |
prioWrrEntryEntry for weighted round robin (WRR). PrioWrrEntry .1.3.6.1.4.1.3709.3.5.201.1.13.1.1 |
prioWrrTrafficClassTraffic class for this entry, as defined in
dot1dTrafficClass in the Q-BRIDGE-MIB. The actual
maximum depends on the hardware, and is
equal to dot1dPortNumTrafficClasses-1. INTEGER .1.3.6.1.4.1.3709.3.5.201.1.13.1.1.1 |
prioWrrWeightWeight for this entry.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.13.1.1.2 |
prioQueueModeThe global status for the prioQueue.
wrr(1),strict(2)rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.13.2 |
trapDestMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.14 |
trapDestTableA list of trap destination entries. SEQUENCE OF TrapDestEntry .1.3.6.1.4.1.3709.3.5.201.1.14.1 |
trapDestEntryThis entry includes a destination IP address to which to send
traps for this community. TrapDestEntry .1.3.6.1.4.1.3709.3.5.201.1.14.1.1 |
trapDestAddressThe address to send traps. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.14.1.1.1 |
trapDestCommunityA community to which this destination address belongs.rw OCTET STRING .1.3.6.1.4.1.3709.3.5.201.1.14.1.1.2 |
trapDestStatusWriting this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.1.1.3 |
trapDestVersionThis variables represent the version of the Trap we wish to send to trap Receiver,
if the value is 1, mean we wish to send Version 1 trap, if the value is 2,
mean we wish to send version 2 trap.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.1.1.4 |
trapVar OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.14.2 |
trapForbiddenAccessModeThis variable is for trap var binding,
indicated the ipfilter reject mode.
web(1),
snmp(2),
telnet(3),
ssh(4).ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.1 |
trapForbiddenAccessIpThis variable is for trap var binding,
indicating the IP address that rejected by the ipfilter.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.14.2.2 |
trapLoginUserNameThis variable is for trap var binding,
indicating the name used by user to logging.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.14.2.3 |
trapConfigSavePartitionThis variable is for trap var binding,
indicating the partition witch the config was saved.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.4 |
trapSfpPresenceStatusThis variable is for trap var binding,
indicating the presence status of a sfp connector.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.5 |
trapInfAlarmValThis variable is for trap var binding,
indicating the alarm value.
deactivated(1),
actived(2),
unstable(3).ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.6 |
trapDuplicatedIpVlanThis variable is for trap var binding,
indicating the vlan witch the duplicated ip was detected.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.7 |
trapDuplicatedIpAddressThis variable is for trap var binding,
indicating the duplicated ip address.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.14.2.8 |
trapDuplicatedIpMacAddressThis variable is for trap var binding,
indicating the mac address of the device that has the duplicated ip.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.14.2.9 |
trapEapsDomainNameThis variable is for trap var binding,
indicating the eaps domain name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.14.2.10 |
trapEapsDomainIdThis variable is for trap var binding,
indicating the eaps domain identifier.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.11 |
trapEapsStatusThis variable is for trap var binding,
indicating the eaps status.
idle(0),
complete(1),
failed(2),
links-up(3),
links-down(4),
pre-forwarding(5).ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.12 |
trapTemperatureThis variable is for trap var binding,
indicating the temperature in degrees Celsius.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.13 |
trapFuseIdThis variable is for trap var binding,
indicating the fuse indentifier.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.14 |
trapFuseStatusThis variable is for trap var binding,
indicating the fuse status.
normal(1),
failed(2).ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.15 |
trapFansBoardPresenceStatusThis variable is for trap var binding,
indicating the presence status of the fans board.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.16 |
trapStandbyMpuPresenceStatusThis variable is for trap var binding,
indicating the presence status of the standby MPU.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.17 |
trapMacAddressMoveThis variable is for trap var binding,
indicating the MAC address of the device that has moved.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.14.2.18 |
trapMemFreeThis variable is for trap var binding,
indicating the total memory free(in Kbytes).ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.19 |
trapBootloaderNewThis variable is for trap var binding,
indicating the installed bootloader version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.14.2.20 |
trapDevNoThis variable is for trap var binding,
indicating the Dev no of equipment.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.21 |
trapDevLocalIdThis variable is for trap var binding,
indicating the Serial number of remote equipment.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.22 |
trapCesopTdmStatusThis variable is for trap var binding,
indicating the status of TDM interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.23 |
trapCesopTdmRemoteStatusThis variable is for trap var binding,
indicating the status of remote TDM interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.24 |
trapCesopTdmCasStatusThis variable is for trap var binding,
indicating the status of CAS TDM interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.25 |
trapCesopTdmCrcStatusThis variable is for trap var binding,
indicating the status of CRC TDM interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.26 |
trapCesopBundleLocalTdmStatusThis variable is for trap var binding,
indicating the status of Local TDM in bundle interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.27 |
trapCesopBundleRemoteTdmStatusThis variable is for trap var binding,
indicating the status of Remote TDM in bundle interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.28 |
trapCesopBundleLocalStatusThis variable is for trap var binding,
indicating the status of Local bundle interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.29 |
trapCesopBundleRemoteStatusThis variable is for trap var binding,
indicating the status of Remote bundle interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.30 |
trapCesopBundlePktMismatchStatusThis variable is for trap var binding,
indicating the status of packet mismatch in bundle interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.31 |
trapCesopBundleNextHopStatusThis variable is for trap var binding,
indicating the status of Next Hop in bundle interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.32 |
trapCesopClockAdapLinkQualityThis variable is for trap var binding,
indicating the Adaptative link quality of clock interface.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.33 |
trapCesopClockSourceStatusThis variable is for trap var binding,
indicating the status of Clock Source interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.34 |
trapBroadcastStormControlStatusThis variable is for trap var binding,
indicating the status of broadcsat storm control at this
interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.35 |
trapBroadcastStormControlPPSThis variable is for trap var binding, indicating the current average count of
broadcast packets per second at this interface.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.36 |
trapMulticastStormControlStatusThis variable is for trap var binding,
indicating the status of multicsat storm control at this
interface.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.37 |
trapMulticastStormControlPPSThis variable is for trap var binding,
indicating the current average count of multicast packets per second at this interface.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.38 |
trapStatusLDPThis variable is for trap var binding,
indicating the status of condition the protocol LDP.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.39 |
trapIdLDPThis variable is for trap var binding,
indicating the entity identification the protocol LDP.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.40 |
trapStatusTunnelRSVPThis variable is for trap var binding,
indicating the status of condition tunnel on protocol RSVP.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.41 |
trapIdTunnelRSVPThis variable is for trap var binding,
indicating the entity identification the tunnel on protocol RSVP.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.42 |
trapPanelStatusThis variable is for trap var binding,
indicating the panel status.
closed(1),
open(2)ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.43 |
trapLSTGroupThis variable is for trap var binding,
indicating the Link-state Tracking Group.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.44 |
trapMemL3FreeThis variable is for trap var binding,
indicating the total L3 memory free(in Kbytes).ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.45 |
trapActiveMpuNsfIdThis variable is for trap var binding,
indicating the active mpu nsf-id.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.46 |
trapStandByMpuNsfIdThis variable is for trap var binding,
indicating the standby mpu nsf-id.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.47 |
trapErpsDomainNameThis variable is for trap var binding,
indicating the erps domain name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.14.2.48 |
trapErpsDomainIdThis variable is for trap var binding,
indicating the erps domain identifier.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.49 |
trapErpsStatusThis variable is for trap var binding,
indicating the erps status.
init(1),
idle(2),
protection(3).ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.50 |
trapCfmMdNameThis variable is for trap var binding,
indicating the Maintenance Domain (MD) name that originated
the trap.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.14.2.51 |
trapCfmMaNameThis variable is for trap var binding,
indicating the Maintenance Association (MA) name that originated
the trap.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.14.2.52 |
trapCfmMepIdThis variable is for trap var binding,
indicating the Maintenance End Point ID (MEPID) that
originated the trap.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.53 |
trapCfmVlanThis variable is for trap var binding,
indicating the VLAN that originated the trap.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.14.2.54 |
trapCfmDefectThis variable is for trap var binding,
indicating the defect condition being notified .
defNone(0),
defRDICCM(1),
defMACstatus(2),
defRemoteCCM(3),
defErrorCCM(4),
defXconCCM(5).ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.55 |
trapEvcNameThis variable is for trap var binding,
indicating the EVC name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.14.2.56 |
trapEvcStatusThis variable is for trap var binding,
indicating the status of EVC being notified,
notActive(0),
newAndNotActive(1),
active(2),
newAndActive(3),
partiallyActive(4),
newAndPartiallyActive(5).ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.57 |
trapSyncSystemClockStatusThis variable is for trap var binding,
indicating the status of system clockro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.58 |
trapCesopG704ClockSourceStatusThis variable is for trap var binding,
indicating the status of g704 clock source.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.59 |
trapSystemWarningsUnitsThis variable is for trap var binding,
indicating the system warnings units.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.60 |
trapSensorGroupThis variable indicates the sensor's type informed in notification.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.14.2.61 |
rateLimitMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.16 |
rateLimitPortTableTable for rate limit of each port. SEQUENCE OF RateLimitPortEntry .1.3.6.1.4.1.3709.3.5.201.1.16.1 |
rateLimitPortEntryEntry for rate limit of each port. RateLimitPortEntry .1.3.6.1.4.1.3709.3.5.201.1.16.1.1 |
rlPortIndexThe port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.16.1.1.1 |
rlPortInputStatusWhether input rate limit is enabled for this port.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.16.1.1.2 |
rlPortOutputStatusWhether output rate limit is enabled for this port.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.16.1.1.3 |
rlPortInputRateRate-limit in kilobits per second. Must be multiple of 64.rw Integer32 .1.3.6.1.4.1.3709.3.5.201.1.16.1.1.4 |
rlPortInputBurstMaximum burst size in kilobits. Must be power of 2.rw Integer32 .1.3.6.1.4.1.3709.3.5.201.1.16.1.1.5 |
rlPortOutputRateRate-limit in kilobits per second. Must be multiple of 64.rw Integer32 .1.3.6.1.4.1.3709.3.5.201.1.16.1.1.6 |
rlPortOutputBurstMaximum burst size in kilobits. Must be power of 2.rw Integer32 .1.3.6.1.4.1.3709.3.5.201.1.16.1.1.7 |
securityMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.17 |
radiusMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.17.1 |
radiusServerPortNumberIP port number of RADIUS server.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.17.1.2 |
radiusServerKeyKey for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string. when this variable is written,
it's max length is 48 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.17.1.3 |
radiusServerRetransmitMaximum number of retransmissions for RADIUS.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.17.1.4 |
radiusServerTimeoutTimeout for RADIUS.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.17.1.5 |
radiusMultipleServerTableThe table for multiple RADIUS server. SEQUENCE OF RadiusMultipleServerEntry .1.3.6.1.4.1.3709.3.5.201.1.17.1.7 |
radiusMultipleServerEntryThe conceptual row for radiusMultipleServerTable. RadiusMultipleServerEntry .1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1 |
radiusMultipleServerIndexThe RADIUS multiple server index. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.1 |
radiusMultipleServerAddressIP address of a multiple RADIUS server.
IP address will be set to system default value(e.g. 10.1.0.1)
after creates an entry first by setting radiusMultipleServerStatus to valid.rw IpAddress .1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.2 |
radiusMultipleServerPortNumberIP port number of a multiple RADIUS server.rw Integer32 .1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.3 |
radiusMultipleServerKeyKey for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string. when this variable is written,
it's max length is 48 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.4 |
radiusMultipleServerRetransmitMaximum number of retransmissions for RADIUS.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.5 |
radiusMultipleServerTimeoutTimeout for RADIUS.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.6 |
radiusMultipleServerStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.8 |
sshMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.17.2 |
sshServerStatusThe status of Secure Shell Server. Set this value to
enabled(1) to enable SSH server, set this value to
disabled(2) to disable the SSH server.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.3709.3.5.201.1.17.2.1 |
sshServerMajorVersionThe major version of the SSH Server.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.17.2.2 |
sshServerMinorVersionThe minor version of the SSH Server.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.17.2.3 |
sshTimeoutThe time interval that the router waits for the SSH
client to respond. The range is 1-120.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.17.2.4 |
sshKeySizeThe SSH server key size.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.17.2.5 |
sshRsaHostKeyThe RSA host key.ro KeySegment .1.3.6.1.4.1.3709.3.5.201.1.17.2.6 |
sshDsaHostKeyThe DSA host key.ro KeySegment .1.3.6.1.4.1.3709.3.5.201.1.17.2.7 |
sshHostKeyGenActionThis variable is for host key generating.
For the set behavior:
Set it to genRsaKey(2) to generate the RSA host key,
and to genDsaKey(3) to generate the DSA host key,
if genBothKeys(4) is set, both RSA and DSA host key are
generated.
For the get behavior:
You will get genRsaKey(2), genDsaKey(3) or
genBothKeys(4) when the key gen action is in progress.
otherwise, you will get noGen(1).rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.17.2.8 |
sshHostKeyDelActionTo delete the host key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA host key,
to delDsaKey(3) to delete the DSA host key,
or to delBothKeys(4) to delete both RSA and DSA host key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1).rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.17.2.9 |
ipFilterMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.17.3 |
ipFilterSnmpTableA list of IP address entries. SEQUENCE OF IpFilterSnmpEntry .1.3.6.1.4.1.3709.3.5.201.1.17.3.1 |
ipFilterSnmpEntryThis entry includes an IP address range which the system
will allow to connect to this device through SNMP. IpFilterSnmpEntry .1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1 |
ipFilterSnmpAddressThe start IP address. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.1 |
ipFilterSnmpMaskThe IP mask. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.2 |
ipFilterSnmpStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.3 |
ipFilterHTTPTableA list of IP address entries. SEQUENCE OF IpFilterHTTPEntry .1.3.6.1.4.1.3709.3.5.201.1.17.3.2 |
ipFilterHTTPEntryThis entry includes an IP address range which the system
will allow to connect to this device through SNMP. IpFilterHTTPEntry .1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1 |
ipFilterHTTPAddressThe start IP address. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.1 |
ipFilterHTTPMaskThe IP mask. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.2 |
ipFilterHTTPStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.3 |
ipFilterTelnetTableA list of IP address entries. SEQUENCE OF IpFilterTelnetEntry .1.3.6.1.4.1.3709.3.5.201.1.17.3.3 |
ipFilterTelnetEntryThis entry includes an IP address range which the system
will allow them to connect to this device through SNMP. IpFilterTelnetEntry .1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1 |
ipFilterTelnetAddressThe start IP address. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.1 |
ipFilterTelnetMaskThe IP mask. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.2 |
ipFilterTelnetStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.3 |
ipFilterSSHTableA list of IP address entries. SEQUENCE OF IpFilterSSHEntry .1.3.6.1.4.1.3709.3.5.201.1.17.3.4 |
ipFilterSSHEntryThis entry includes an IP address range which the system
will allow them to connect to this device through SNMP. IpFilterSSHEntry .1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1 |
ipFilterSSHAddressThe start IP address. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.1 |
ipFilterSSHMaskThe IP mask. IpAddress .1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.2 |
ipFilterSSHStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.3 |
sysLogMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.19 |
sysLogStatusWhether system log is enabled.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.19.1 |
sysLogHistoryFlashLevelSeverity level for logging to flash.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.19.2 |
sysLogHistoryRamLevelSeverity level for logging to RAM.rw INTEGER .1.3.6.1.4.1.3709.3.5.201.1.19.3 |
remoteLogMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.19.6 |
remoteLogStatusWhether the remote log system is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.3709.3.5.201.1.19.6.1 |
remoteLogLevelSeverity level for remote log.rw Integer32 .1.3.6.1.4.1.3709.3.5.201.1.19.6.2 |
remoteLogFacilityTypeThe FacilityType for remote log.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.19.6.3 |
remoteLogServerTableA Table for storing the remote log Server list. SEQUENCE OF RemoteLogServerEntry .1.3.6.1.4.1.3709.3.5.201.1.19.6.4 |
remoteLogServerEntryA conceptually row for remoteLogServerTable. RemoteLogServerEntry .1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1 |
remoteLogServerIpThe IP address of the remote log Server.rw IpAddress .1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.1 |
remoteLogServerStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.2 |
sysTimeMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.20 |
sntpMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.20.1 |
sntpStatusSet enabled(1) to enable the SNTP, set disabled(2) to disable
the SNTP.rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.20.1.1 |
sntpPollIntervalPolling interval.rw Integer32 .1.3.6.1.4.1.3709.3.5.201.1.20.1.2 |
sntpServerTableTable for SNTP servers SEQUENCE OF SntpServerEntry .1.3.6.1.4.1.3709.3.5.201.1.20.1.3 |
sntpServerEntryEntry for SNTP servers. SntpServerEntry .1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1 |
sntpServerIpThe IP address of a server.rw IpAddress .1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.1 |
sntpServerStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.2 |
sysCurrentTimeIt is a text string in the following form, based on Unix:
'Mmm _d hh:mm:ss yyyy'. 'Mmm' is the first three letters
of the English name of the month. '_d' is the day of month.
A single-digit day is preceded by the space. 'hh:mm:ss' is
a 24-hour representations of hours, minutes, and seconds.
A single-digit hour is preceded by a zero. 'yyyy' is the
four-digit year. An example is: 'Jan 1 02:03:04 2002'.rw DisplayString .1.3.6.1.4.1.3709.3.5.201.1.20.2 |
sysTimeZoneIt is a text string in the following form: '[s]hh:mm'.
'[s]' is a plus-or-minus sign. For UTC, this is omitted.
For a positive offset, this is '+'. For a negative offset,
this is '-'. 'hh:mm' in the hour and minute offset from UTC.
A single-digit hour is preceded by a zero.rw DisplayString .1.3.6.1.4.1.3709.3.5.201.1.20.3 |
sysTimeZoneNameThe name of the time zone.rw DisplayString .1.3.6.1.4.1.3709.3.5.201.1.20.4 |
fileMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.21 |
fileInfoTableThis table contain the information of the file system;
we can also perform the delete, set startup file operation. SEQUENCE OF FileInfoEntry .1.3.6.1.4.1.3709.3.5.201.1.21.1 |
fileInfoEntryA conceptually row for fileInfoTable. FileInfoEntry .1.3.6.1.4.1.3709.3.5.201.1.21.1.1 |
fileInfoUnitIDThe switch unit in a stacking system, in a
non-stacking system, this value is always 1. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.21.1.1.1 |
fileInfoFileIndex Integer32 .1.3.6.1.4.1.3709.3.5.201.1.21.1.1.2 |
fileInfoFlashIdro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.21.1.1.3 |
fileInfoFileNameThe file Name of the file System in the device.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.21.1.1.4 |
fileInfoFileTypeThe file type of the file System in the device.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.21.1.1.5 |
fileInfoIsStartUpThis flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3709.3.5.201.1.21.1.1.6 |
fileInfoFileSizeThe sizes (in bytes) of the file.ro Integer32 UNITS "bytes" .1.3.6.1.4.1.3709.3.5.201.1.21.1.1.7 |
fileInfoCreationTimeThe creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A single-digit day is preceded by
a space. 'hh:mm:ss' is a 24-hour representations of hours,
minutes, and seconds. A single-digit hour is preceded by a
zero. 'yyyy' is the four-digit year. An example is:
'Jan 1 02:03:04 2002'.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.21.1.1.8 |
fileInfoDeleteWrite this object to delete(2) to delete a file, when
read, this always return noDelete(1).rw Enumeration .1.3.6.1.4.1.3709.3.5.201.1.21.1.1.9 |
countMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.22 |
countHoldPktsTableTable of dropped packets counters by interface for QoS statistics. SEQUENCE OF CountHoldPktsEntry .1.3.6.1.4.1.3709.3.5.201.1.22.1 |
countHoldPktsEntryAn entry in the table, containing the number of dropped packets in a single interface. CountHoldPktsEntry .1.3.6.1.4.1.3709.3.5.201.1.22.1.1 |
interfaceNumberInterface Number from dropped packets.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.22.1.1.1 |
countHoldPktsCounter Hold shows the number of dropped packets in a single interface.ro Counter64 .1.3.6.1.4.1.3709.3.5.201.1.22.1.1.2 |
filterCounterMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.23 |
filterCounterInfoTableThis table contain the description about counters,
so they can be used to measure performance from user-based
filters. SEQUENCE OF FilterCounterInfoEntry .1.3.6.1.4.1.3709.3.5.201.1.23.1 |
filterCounterInfoEntryA conceptually row for filterCounterInfoTable. FilterCounterInfoEntry .1.3.6.1.4.1.3709.3.5.201.1.23.1.1 |
filterCounterInfoIndexIndex for counter, matches current CLI informationro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.23.1.1.1 |
filterCounterInfoRemarkRemark is a textual description, as configured by user.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.23.1.1.2 |
filterCounterValueTableThis table contains current values for filter counters. SEQUENCE OF FilterCounterValueEntry .1.3.6.1.4.1.3709.3.5.201.1.23.2 |
filterCounterValueEntryA conceptually row for filterCounterValueTable. FilterCounterValueEntry .1.3.6.1.4.1.3709.3.5.201.1.23.2.1 |
filterCounterValueIndexSubcounters index identifies each internal counter that a
user-editable counter can have. Internal counters may differ from
equipament model to other.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.23.2.1.1 |
filterCounterValueThe total number of data which matches internal subcounter.
It can be bytes or packets, according to equipment configuration.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times.ro Counter64 .1.3.6.1.4.1.3709.3.5.201.1.23.2.1.2 |
eapsMgt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.24 |
eapsInfoTableThis table contains EAPS information about all EAPS
domains on this device. SEQUENCE OF EapsInfoEntry .1.3.6.1.4.1.3709.3.5.201.1.24.1 |
eapsInfoEntryAn individual entry of this table contains EAPS
information related to that EAPS domain. EapsInfoEntry .1.3.6.1.4.1.3709.3.5.201.1.24.1.1 |
eapsInfoIdThis indicates the mode of the EAPS Id.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.24.1.1.1 |
eapsInfoNameThe EAPS domain name.ro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.24.1.1.2 |
eapsInfoModeThis indicates the mode of the EAPS domain.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.24.1.1.3 |
eapsInfoStateThis indicates the current EAPS state of this EAPS
domain.ro Enumeration .1.3.6.1.4.1.3709.3.5.201.1.24.1.1.4 |
cfmProbeMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.25 |
cfmProbeDmTableThis table contains CFM delay measurements informationS. SEQUENCE OF CfmProbeDmEntry .1.3.6.1.4.1.3709.3.5.201.1.25.1 |
cfmProbeDmEntryAn individual entry of this table contains CFM
delay measurements information related to that probe. CfmProbeDmEntry .1.3.6.1.4.1.3709.3.5.201.1.25.1.1 |
cfmProbeDmIndexThe index value used to identify the probe.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.25.1.1.1 |
cfmProbeDmAvgDelayThe average delay in microseconds of CFM delay measurement.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.25.1.1.2 |
cfmProbeDmAvgJitterThe average jitter in microseconds of CFM delay measurement.ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.25.1.1.3 |
cfmProbeDmLossThe percentage of CFM frames lost on the indicate probe.ro INTEGER .1.3.6.1.4.1.3709.3.5.201.1.25.1.1.4 |
cpumonMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.26 |
cpuActiveUsageTableTable of cpu usage. SEQUENCE OF CpuActiveUsageEntry .1.3.6.1.4.1.3709.3.5.201.1.26.1 |
cpuActiveUsageEntryTable of cpu usage. CpuActiveUsageEntry .1.3.6.1.4.1.3709.3.5.201.1.26.1.1 |
cpuActiveUsageIndexThis object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.26.1.1.1 |
cpuActiveUsageValueThe CPU usage (in hundredths of a percent).ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.26.1.1.2 |
memActiveUsageTableTable of memory usage. SEQUENCE OF MemActiveUsageEntry .1.3.6.1.4.1.3709.3.5.201.1.26.2 |
memActiveUsageEntryTable of memory usage. MemActiveUsageEntry .1.3.6.1.4.1.3709.3.5.201.1.26.2.1 |
memActiveUsageIndexThis object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.26.2.1.1 |
memActiveUsageValueThe memory usage (percentage).ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.26.2.1.2 |
cpuStandbyUsageTableTable of cpu usage. SEQUENCE OF CpuStandbyUsageEntry .1.3.6.1.4.1.3709.3.5.201.1.26.3 |
cpuStandbyUsageEntryTable of cpu usage. CpuStandbyUsageEntry .1.3.6.1.4.1.3709.3.5.201.1.26.3.1 |
cpuStandbyUsageIndexThis object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.26.3.1.1 |
cpuStandbyUsageValueThe CPU usage (in hundredths of a percent).ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.26.3.1.2 |
memStandbyUsageTableTable of memory usage. SEQUENCE OF MemStandbyUsageEntry .1.3.6.1.4.1.3709.3.5.201.1.26.4 |
memStandbyUsageEntryTable of memory usage. MemStandbyUsageEntry .1.3.6.1.4.1.3709.3.5.201.1.26.4.1 |
memStandbyUsageIndexThis object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.26.4.1.1 |
memStandbyUsageValueThe memory usage (percentage).ro Integer32 .1.3.6.1.4.1.3709.3.5.201.1.26.4.1.2 |
queuePortMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.27 |
queuePortTableTable for statistics of interface queues. SEQUENCE OF QueuePortEntry .1.3.6.1.4.1.3709.3.5.201.1.27.1 |
queuePortEntryAn entry in the table, containing information
about configuration in one switch port of the switch. QueuePortEntry .1.3.6.1.4.1.3709.3.5.201.1.27.1.1 |
queuePortIfIndexThis is defined as ifIndex in the IF-MIB. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.27.1.1.1 |
queuePortQueueIndexThe COS queue from the interface. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.27.1.1.2 |
queuePortSentPacketsCounter of sent packets.ro Counter64 .1.3.6.1.4.1.3709.3.5.201.1.27.1.1.3 |
queuePortSentBytesCounter of sent bytes.ro Counter64 .1.3.6.1.4.1.3709.3.5.201.1.27.1.1.4 |
queuePortDroppedPacketsCounter of dropped packets.ro Counter64 .1.3.6.1.4.1.3709.3.5.201.1.27.1.1.5 |
queuePortDroppedBytesCounter of dropped bytes.ro Counter64 .1.3.6.1.4.1.3709.3.5.201.1.27.1.1.6 |
ddTransceiversMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.1.28 |
ddTransceiversTableTransceivers digital diagnostic table. SEQUENCE OF DdTransceiversEntry .1.3.6.1.4.1.3709.3.5.201.1.28.1 |
ddTransceiversEntryAn entry in the table, containing information
about digital diagnostic. DdTransceiversEntry .1.3.6.1.4.1.3709.3.5.201.1.28.1.1 |
ddTransceiversIfIndexThis is defined as ifIndex in the IF-MIB. Integer32 .1.3.6.1.4.1.3709.3.5.201.1.28.1.1.1 |
ddTransceiversTemperatureTransceiver temperature information in Celsiusro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.28.1.1.2 |
ddTransceiversVcc3v3Transceiver Vcc 3v3 information in Voltsro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.28.1.1.3 |
ddTransceiversRxPowerTransceiver rx power information in Decibelsro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.28.1.1.4 |
ddTransceiversTxPowerTransceiver tx power information in Decibelsro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.28.1.1.5 |
ddTransceiversTxBiasTransceiver tx bias information in Amperesro DisplayString .1.3.6.1.4.1.3709.3.5.201.1.28.1.1.6 |
dmSwitchNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.2 |
dmSwitchTraps OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.2.1 |
dmSwitchTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.2.1.0 |
swLoginFailTrapThis trap is sent when an user try logging with a
incorrect username or password. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40001 |
swLoginSucessTrapThis trap is sent when an user get logging. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40002 |
swStackAttachTrapThis trap is sent when a device is attached in stack. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40003 |
swStackDetachTrapThis trap is sent when a device is detached from stack. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40004 |
swForbiddenAccessTrapThis trap is sent when an incorrect IP address is rejected by
the ipfilter. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40005 |
swSfpPresenceTrapThis trap is sent when a sfp conector is taken off or placed. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40006 |
swConfigChangeTrapThis trap is sent when the device's config change. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40007 |
swConfigSaveTrapThis trap is sent when the device's config is saved. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40008 |
swFanStatusChangeTrapThis trap is sent when the status of one fan changes. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40009 |
swTrapsLostTrapThis trap is sent when one or more traps are discarded. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40010 |
swPowerStatusChangeTrapThis trap is sent when the status of one PSU changes. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40011 |
swAlarmTrapThis trap is sent when the status of one alarm changes. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40012 |
swDuplicatedIpThis trap is sent when a duplicate ip is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40013 |
swLoopbackOnPortDetectedThis trap is sent when a loopback on port is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40014 |
swLoopbackOnPortNoMoreDetectedThis trap is sent when a loopback on port is no more detected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40015 |
swUnidirLinkDetectedThis trap is sent when a unidirectional link on port is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40016 |
swUnidirLinkRecoveredThis trap is sent when a unidirectional link on port is recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40017 |
swCriticalEventDetectedThis trap is sent when a critical event on port is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40018 |
swCriticalEventRecoveredThis trap is sent when a critical event on port is recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40019 |
swLinkFlapDetectedThis trap is sent when a link-flap on port is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40020 |
swLinkFlapNoMoreDetectedThis trap is sent when a link-flap on port is no more detected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40021 |
swEapsStatusChangeThis trap is sent when the eaps status change. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40022 |
swPortSecurityViolationThis trap is sent when a port-security violation happens. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40023 |
swHighTemperatureDetectedThis trap is sent when a high temperature is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40024 |
swHighTemperatureNoMoreDetectedThis trap is sent when a high temperature is no more detected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40025 |
swFuseStatusChangeThis trap is sent when the status of on fuse changes. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40026 |
swFansBoardPresenceTrapThis trap is sent when the fans board is taken off or placed. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40027 |
swStandbyMpuTrapThis trap is sent when the standby MPU is taken off or placed. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40028 |
swNonHomologSfpTrapThis trap is sent when a non-homologated SFP is placed. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40029 |
swHighCpuUsageDetectedThis trap is sent when the CPU utilization is greater than 90%. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40030 |
swHighCpuUsageNoMoreDetectedThis trap is sent when the CPU utilization is lower than 90%. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40031 |
swDuplicatedMacThis trap is sent when a MAC address move is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40032 |
swHighMemoryUsageDetectedThis trap is sent when the memory utilization is critical. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40033 |
swHighMemoryUsageNoMoreDetectedThis trap is sent when the memory utilization is normal. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40034 |
swNewBootloaderVersionThis trap is sent when a new bootloader version is saved. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40035 |
swCesopTdmStatusTrapThis trap is sent when TDM status change. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40036 |
swCesopTdmRemoteStatusTrapThis trap is sent when TDM Remote status change (RALM). NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40037 |
swCesopTdmCasStatusTrapThis trap is sent when TDM Cas status change (LOM). NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40038 |
swCesopTdmCrcStatusTrapThis trap is sent when TDM CRC status change (CRC). NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40039 |
swCesopBundleLocalTdmStatusTrapThis trap is sent when Bundle Local TDM status change. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40040 |
swCesopBundleRemoteTdmStatusTrapThis trap is sent when Bundle Remote TDM status change. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40041 |
swCesopBundleLocalStatusTrapThis trap is sent when Bundle Local status change. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40042 |
swCesopBundleRemoteStatusTrapThis trap is sent when Bundle Remote status change. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40043 |
swCesopBundlePktMismatchTrapThis trap is sent when Packet mismatch status chanege in Bundle Interface. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40044 |
swCesopBundleNextHopTrapThis trap is sent when Packet mismatch status chanege in Bundle Interface. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40045 |
swCesopClockAdapLinkQualityTrapThis trap is sent when Adaptative link quality change in clock source interface. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40046 |
swCesopClockSourceTrapThis trap is sent when Source clock status change. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40047 |
swRemoteDeviceReadyThis trap is sent when a remote device becomes ready to be managed. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40048 |
swRemoteDeviceLostThis trap is sent when a remote device is no longer manageable. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40049 |
swRemoteDeviceConfigFailThis trap is sent when the configuration sent to a remote device is rejected. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40050 |
swRemoteDeviceConfigForcedThis trap is sent when a remote device configuration is forced. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40051 |
swFanFuseStatusChangeThis trap is sent when the fan board fuse change its status. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40052 |
swDyingGaspPackReceivedThis trap is sent every time an OAM:Dying Gasp package is received on port NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40053 |
swBroadcastStormCheckChangeThis trap is sent when a broadcast storm threshold is hit or recovers. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40054 |
swMulticastStormCheckChangeThis trap is sent when a multicast storm threshold is hit or recovers. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40055 |
swBpduProtectLimitThis trap is sent when a BPDU limit has reached. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40056 |
swChangeStatusLDPThis trap is sent when occurs one change on status the
protocol LDP. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40057 |
swChangeStatusTunnelRSVPThis trap is sent when occurs one change on status the
tunnels of protocol RSVP. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40058 |
swBpduProtectThis trap is sent when a BPDU protect block time expired. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40059 |
swRouteTableFullThis trap is sent when L3 Routing Table reaches its limits. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40060 |
swPanelStatusTrapThis trap is sent when the Panel status change. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40061 |
swLSTGroupLinkStatusDownThis trap is sent when a link-state tracking group is down NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40062 |
swLSTGroupLinkStatusUpThis trap is sent when a link-state tracking group is up NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40063 |
swHighCpuL3UsageDetectedThis trap is sent when the CPU L3 utilization is greater
than 90%. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40064 |
swHighCpuL3UsageNoMoreDetectedThis trap is sent when the CPU L3 utilization is lower
than 90%. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40065 |
swHighMemoryL3UsageDetectedThis trap is sent when the L3 memory utilization is critical. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40066 |
swHighMemoryL3UsageNoMoreDetectedThis trap is sent when the L3 memory utilization is normal. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40067 |
swMpuNsfIdDiffersThis trap is sent when the active and standby mpu nsf-id differs. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40068 |
swErpsStatusChangeThis trap is sent when the erps status change. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40069 |
swCfmDefectThis trap is sent when some CFM MEP enters or leave an error state. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40070 |
swLldpRemoteChangeThis trap is sent when LLDP remote table changes. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40071 |
swPoeOverCurrentThis trap is sent when a Power over Ethernet enabled port was shut down due an overcurrent. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40072 |
swPoePowerRestrictionThis trap is sent when an Power over Ethernet enabled port was shut down because the connected device announced an power consumption over the configured for the port. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40073 |
swCoreDumpThis trap is sent when an application terminate abnormally and generates a core dump. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40074 |
swElmiEvcStatusThis trap is sent when an EVC changes its state. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40075 |
swSyncSystemClockSwitchHierThis trap is sent when system changes active clock synchronize hierarchy NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40076 |
swSyncSystemClockStatusThis trap is sent when system clock changes its status NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40077 |
swHostTableFullThis trap is sent when L3 Host Table reaches its limits. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40078 |
swSyncG704ClockStatusThis trap is sent when g704 clock source changes its status. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40079 |
swSystemWarningsUnitsThis trap is sent when warnings in the system units are found. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40080 |
swRebootDueToOvertempThis trap is sent when the device reboots due to overheat. NOTIFICATION-TYPE .1.3.6.1.4.1.3709.3.5.201.2.1.0.40081 |
dmSwitchConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3709.3.5.201.3 |