DMTF-SYSTEMS-MIB
This MIB is a translation of the DMTF Systems MIF based on the translation rules defined by the DMTF DMI to SNMP Mapping Standard, Version 1.0.
DMI-based systems running a DMI-to-SNMP Mapping Agent provide the ability to access DMI component instrumentation via SNMP protocol operations.
Main OID:
dmtfSystemsMIF.1.3.6.1.4.1.412.2.4
822
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
822 total| Object Name |
|---|
dmtf OBJECT IDENTIFIER .1.3.6.1.4.1.412 |
IMPORTS Unknown .1.3.6.1.4.1.412 |
dmtfStdMifs OBJECT IDENTIFIER .1.3.6.1.4.1.412.2 |
dmtfSystemsMIFThis MIB is a translation of the DMTF Systems MIF
based on the translation rules defined by the
DMTF DMI to SNMP Mapping Standard, Version 1.0.
DMI-based systems running a DMI-to-SNMP Mapping
Agent provide the ability to access DMI component
instrumentation via SNMP protocol operations. MODULE-IDENTITY .1.3.6.1.4.1.412.2.4 |
dmtfGeneralInformationTableThis group defines general information about this system. SEQUENCE OF SdmtfGeneralInformation .1.3.6.1.4.1.412.2.4.1 |
dmtfGeneralInformationEntryThis group defines general information about this system. SdmtfGeneralInformation .1.3.6.1.4.1.412.2.4.1.1 |
systemNameA name to identify this system.rw DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.1.1.1 |
systemLocationThe physical location of this system.rw DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.1.1.2 |
systemPrimaryUserNameThe name of the primary user or owner of this system.rw DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.1.1.3 |
systemPrimaryUserPhoneThe phone number of the primary user of this system.rw DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.1.1.4 |
systemBootupTimeThe time at which the system was last booted.ro Dmi-Date .1.3.6.1.4.1.412.2.4.1.1.5 |
systemDateTimeThe actual system date and time.rw Dmi-Date .1.3.6.1.4.1.412.2.4.1.1.6 |
dmtfOperatingSystemTableThis group defines general information about operating systems
installed on this system. SEQUENCE OF SdmtfOperatingSystem .1.3.6.1.4.1.412.2.4.2 |
dmtfOperatingSystemEntryThis group defines general information about operating systems
installed on this system. SdmtfOperatingSystem .1.3.6.1.4.1.412.2.4.2.1 |
dmtfOperatingSystemStaterw Enumeration .1.3.6.1.4.1.412.2.4.2.1.0 |
operatingSystemIndexThe index into the operating system table.ro DmiInteger .1.3.6.1.4.1.412.2.4.2.1.1 |
operatingSystemNameThe name of this operating system.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.2.1.2 |
operatingSystemVersionThe version number of this operating system.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.2.1.3 |
primaryOperatingSystemIf true, this is the primary operating system.ro Enumeration .1.3.6.1.4.1.412.2.4.2.1.4 |
operatingSystemBootDeviceStorageTypeAn index into the Disks Table to indicate the device from
which this operating system was booted. To fully access the Disks Table,
this index must be combined with the attribute Boot Device Index.ro Enumeration .1.3.6.1.4.1.412.2.4.2.1.5 |
operatingSystemBootDeviceIndexAn index into the Disks Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.2.1.6 |
operatingSystemBootPartitionIndexAn index into the Partition table indicating the partition
from which this operating system booted.ro DmiInteger .1.3.6.1.4.1.412.2.4.2.1.7 |
operatingSystemDescriptionA description of this operating system.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.2.1.8 |
dmtfSystemBIOSTableThis group defines the attributes for the System BIOS. SEQUENCE OF SdmtfSystemBIOS .1.3.6.1.4.1.412.2.4.3 |
dmtfSystemBIOSEntryThis group defines the attributes for the System BIOS. SdmtfSystemBIOS .1.3.6.1.4.1.412.2.4.3.1 |
dmtfSystemBIOSStaterw Enumeration .1.3.6.1.4.1.412.2.4.3.1.0 |
bIOSIndexThe index into the system BIOS table.ro DmiInteger .1.3.6.1.4.1.412.2.4.3.1.1 |
bIOSManufacturerThe name of the company that wrote this System BIOS.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.3.1.2 |
bIOSVersionThe version number or version string of this BIOS.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.3.1.3 |
bIOSROMSizeThe physical size of this BIOS ROM device in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.3.1.4 |
bIOSStartingAddressThe starting physical address for the memory which the BIOS
occupies.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.3.1.5 |
bIOSEndingAddressThe ending physical address for the memory which the BIOS
occupies.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.3.1.6 |
bIOSLoaderVersionThe BIOS flash loader version number or string.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.3.1.7 |
bIOSReleaseDateThe BIOS release date.ro Dmi-Date .1.3.6.1.4.1.412.2.4.3.1.8 |
primaryBIOSIf true, this is the primary System BIOS.ro Enumeration .1.3.6.1.4.1.412.2.4.3.1.9 |
dmtfBIOSCharacteristicTableThis group defines the characteristics of the System BIOS. SEQUENCE OF SdmtfBIOSCharacteristic .1.3.6.1.4.1.412.2.4.4 |
dmtfBIOSCharacteristicEntryThis group defines the characteristics of the System BIOS. SdmtfBIOSCharacteristic .1.3.6.1.4.1.412.2.4.4.1 |
dmtfBIOSCharacteristicStaterw Enumeration .1.3.6.1.4.1.412.2.4.4.1.0 |
bIOSCharacteristicIndexThis is an index into the BIOS Characteristics table.ro DmiInteger .1.3.6.1.4.1.412.2.4.4.1.1 |
bIOSNumberThe BIOS number, which correlates to the BIOS Index attribute
in the System BIOS group.ro DmiInteger .1.3.6.1.4.1.412.2.4.4.1.2 |
bIOSCharacteristicThe different features supported by this version of the BIOS.ro Enumeration .1.3.6.1.4.1.412.2.4.4.1.3 |
bIOSCharacteristicDescriptionAn expanded description of this BIOS Characteristic.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.4.1.4 |
dmtfProcessorTableThis group defines the attributes for each and every processor
installed in this system. SEQUENCE OF SdmtfProcessor .1.3.6.1.4.1.412.2.4.5 |
dmtfProcessorTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.5.0 |
dmtfProcessorFailureA processor in the system has failed NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.5.0.1 |
dmtfProcessorSystemUpA system processor is now up and running. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.5.0.2 |
dmtfProcessorInitializationFailureA system processor failed to initialize
properly during system startup. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.5.0.3 |
dmtfProcessorConfigurationErrorA system processor is not properly configured NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.5.0.4 |
dmtfProcessorEntryThis group defines the attributes for each and every processor
installed in this system. SdmtfProcessor .1.3.6.1.4.1.412.2.4.5.1 |
dmtfProcessorStaterw Enumeration .1.3.6.1.4.1.412.2.4.5.1.0 |
processorIndexAn index into the processor table.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.1 |
processorTypeThe type of processor currently in the system.ro Enumeration .1.3.6.1.4.1.412.2.4.5.1.2 |
processorFamilyThe family of processors to which this processor belongs.ro Enumeration .1.3.6.1.4.1.412.2.4.5.1.3 |
processorVersionInformationThe version number or string for this processor.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.5.1.4 |
currentSpeedThe current speed (in MHz) of this processor.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.6 |
processorUpgradeThe method by which this processor can be upgraded, if upgrades
are supported.ro Enumeration .1.3.6.1.4.1.412.2.4.5.1.7 |
level1CacheIndexAn index into the System Cache table that identifies the
entry that describes the L1 cache for this processor. If more than one processor
points to the same cache entry this means they share that cache.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.10 |
level2CacheIndexAn index into the System Cache table that identifies the
entry that describes the L2 cache for this processor If more than one processor
points to the same cache entry this means they share that cache.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.11 |
level3CacheIndexAn index into the System Cache table that identifies the
entry that describes the L3 cache for this processor. If more than one processor
points to the same cache entry this means they share that cache.ro DmiInteger .1.3.6.1.4.1.412.2.4.5.1.12 |
dmtfProcessorEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.5.6 |
dmtfProcessorEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.5.7 |
dmtfMotherboardTableThis group defines attributes for the motherboard. SEQUENCE OF SdmtfMotherboard .1.3.6.1.4.1.412.2.4.6 |
dmtfMotherboardTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.6.0 |
dmtfMotherboardProcessorFailureA processor on the system motherboard has
failed or been fixed according to the event
severity indicated. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.6.0.1 |
dmtfMotherboardPhysicalDeviceStatusChangeThe motherboard physical status has changed
according to the event severity indicated. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.6.0.2 |
dmtfMotherboardMemoryErrorA memory module on the system's motherboard
has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.6.0.3 |
dmtfMotherboardSystemUpThe system's motherboard reports it has
started-up successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.6.0.4 |
dmtfMotherboardInitializationFailureThe system's motherboard has failed to
initialize properly during system startup. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.6.0.5 |
dmtfMotherboardConfigurationErrorThe system's motherboard is not properly configured NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.6.0.6 |
dmtfMotherboardEntryThis group defines attributes for the motherboard. SdmtfMotherboard .1.3.6.1.4.1.412.2.4.6.1 |
numberOfExpansionSlotsThe total number of expansion slots which physically exist
on the motherboard whether occupied or not (see System Slots group).ro DmiInteger .1.3.6.1.4.1.412.2.4.6.1.1 |
dmtfMotherboardEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.6.6 |
dmtfMotherboardEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.6.7 |
dmtfPhysicalMemoryTableThe physical attributes for system memory and any add-on
memory installed in this system. SEQUENCE OF SdmtfPhysicalMemory .1.3.6.1.4.1.412.2.4.7 |
dmtfPhysicalMemoryEntryThe physical attributes for system memory and any add-on
memory installed in this system. SdmtfPhysicalMemory .1.3.6.1.4.1.412.2.4.7.1 |
dmtfPhysicalMemoryStaterw Enumeration .1.3.6.1.4.1.412.2.4.7.1.0 |
physicalMemoryIndexAn index into the physical memory table.ro DmiInteger .1.3.6.1.4.1.412.2.4.7.1.1 |
physicalMemoryLocationThe location of the memory modules, whether on the system
board or an add-on board.ro Enumeration .1.3.6.1.4.1.412.2.4.7.1.2 |
memoryStartingAddressThe starting physical address mapped by this memory component.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.7.1.3 |
memoryEndingAddressThe ending physical address mapped by this memory component.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.7.1.4 |
memoryUsageWhat this memory component is used for.ro Enumeration .1.3.6.1.4.1.412.2.4.7.1.5 |
maximumMemoryCapacityThe maximum memory capacity, in megabytes, on this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.7.1.6 |
numberOfSIMMSlotsThe number of SIMM slots available for this type of memory
on this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.7.1.7 |
numberOfSIMMSlotsUsedThe number of SIMM slots in use for this type of memory on
this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.7.1.8 |
memorySpeedThe speed of this memory component in nanoseconds.ro DmiInteger .1.3.6.1.4.1.412.2.4.7.1.9 |
memoryErrorCorrectionThe main error correction scheme supported by this memory
component.ro Enumeration .1.3.6.1.4.1.412.2.4.7.1.10 |
maximumMemoryCapacityFractionalPartMaximum memory capacity fractional part in bytes. This plus
the 'Maximum Memory Capacity' attribute gives the total maximum memory capacity.
Rationale: the units for the 'Maximum Memory Capacity'attribute (i.e. megabytes)
could not be corrected to kilobytes for reasons of backward compatibility.ro DmiInteger .1.3.6.1.4.1.412.2.4.7.1.13 |
dmtfLogicalMemoryTableThis group defines the logical memory attributes for system
memory and any add-on memory installed in this system. SEQUENCE OF SdmtfLogicalMemory .1.3.6.1.4.1.412.2.4.8 |
dmtfLogicalMemoryTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.8.0 |
dmtfLogicalMemoryErrorA an error has occured in the system's logical memory space. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.8.0.1 |
dmtfLogicalMemoryInitializationFailureAn error occured while initializing the system's memory. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.8.0.2 |
dmtfLogicalMemoryEntryThis group defines the logical memory attributes for system
memory and any add-on memory installed in this system. SdmtfLogicalMemory .1.3.6.1.4.1.412.2.4.8.1 |
baseMemorySizeThe total size of the base memory in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.8.1.1 |
freeBaseMemorySizeThe size of free base memory in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.8.1.2 |
extendedMemorySizeThe total size of the extended memory in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.8.1.3 |
freeExtendedMemorySizeThe size of free extended memory in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.8.1.4 |
extendedMemoryManagerNameThe name of the extended memory manager.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.8.1.5 |
extendedMemoryManagerVersionThe version information of the extended memory manager.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.8.1.6 |
expandedMemorySizeThe total size of the expanded memory in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.8.1.7 |
freeExpandedMemorySizeThe size of free expanded memory in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.8.1.8 |
expandedMemoryManagerNameThe name of the expanded memory manager.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.8.1.9 |
expandedMemoryManagerVersionThe version information of the expanded memory manager.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.8.1.10 |
expandedMemoryPageFrameAddressThe starting physical address of the expanded memory pageframe.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.8.1.11 |
expandedMemoryPageFrameSizeThe size in kilobytes of the expanded memory page frame.ro DmiInteger .1.3.6.1.4.1.412.2.4.8.1.12 |
expandedMemoryPageSizeThe size in kilobytes of an expanded memory page, as opposed
to the expanded memory page frame, which consists of a number of memory pages.ro DmiInteger .1.3.6.1.4.1.412.2.4.8.1.13 |
dmtfLogicalMemoryEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.8.6 |
dmtfLogicalMemoryEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.8.7 |
dmtfSystemCacheTableThis group defines the attributes for different System Caches
installed in this system. SEQUENCE OF SdmtfSystemCache .1.3.6.1.4.1.412.2.4.9 |
dmtfSystemCacheTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.9.0 |
dmtfSystemCacheMemoryErrorA memory module in the system cache failed. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.9.0.1 |
dmtfSystemCacheInitializationFailureThe System Cache failed to initialize properly
during system startup. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.9.0.2 |
dmtfSystemCacheEntryThis group defines the attributes for different System Caches
installed in this system. SdmtfSystemCache .1.3.6.1.4.1.412.2.4.9.1 |
dmtfSystemCacheStaterw Enumeration .1.3.6.1.4.1.412.2.4.9.1.0 |
systemCacheIndexAn index into the System Cache table.ro DmiInteger .1.3.6.1.4.1.412.2.4.9.1.1 |
systemCacheLevelIs this the primary System Cache, or a subsidiary cache?ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.2 |
systemCacheSpeedThe speed of this System Cache module in nanoseconds.ro DmiInteger .1.3.6.1.4.1.412.2.4.9.1.3 |
systemCacheSizeThe size of this System Cache module in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.9.1.4 |
systemCacheWritePolicyIs this a write-back or a write-through cache?ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.5 |
systemCacheErrorCorrectionThe error correction scheme supported by this cache component.ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.6 |
systemCacheTypeThis defines the system cache type.ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.9 |
lineSizeThe size, in bytes, of a single cache bucket or line.ro DmiInteger .1.3.6.1.4.1.412.2.4.9.1.10 |
volatilityThis defines the volatility of the cache.ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.11 |
replacementPolicyThe algorithm used by the cache to determine which cache
lines or buckets should be re-used.ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.12 |
readPolicyThe policy that shall be employed by the cache for handling
read requests.ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.13 |
flushTimerThe maximum amount of time, in seconds, dirty lines or buckets
may remain in the cache before they are flushed. A value of zero indicated
that a cache flush is not controlled by a flushing timer.ro DmiInteger .1.3.6.1.4.1.412.2.4.9.1.14 |
associativityThis defines the system cache associativity (direct-mapped,
2-way, 4-way, etc).ro Enumeration .1.3.6.1.4.1.412.2.4.9.1.15 |
dmtfSystemCacheEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.9.6 |
dmtfSystemCacheEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.9.7 |
dmtfParallelPortsTableThis group defines the attributes for parallel ports in this
system. SEQUENCE OF SdmtfParallelPorts .1.3.6.1.4.1.412.2.4.10 |
dmtfParallelPortsEntryThis group defines the attributes for parallel ports in this
system. SdmtfParallelPorts .1.3.6.1.4.1.412.2.4.10.1 |
dmtfParallelPortsStaterw Enumeration .1.3.6.1.4.1.412.2.4.10.1.0 |
parallelPortIndexAn index into the parallel ports table.ro DmiInteger .1.3.6.1.4.1.412.2.4.10.1.1 |
parallelBaseIOAddressBase I/O address for this parallel port.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.10.1.2 |
connectorPinoutThe pinout used by the I/O device on this parallel port.ro Enumeration .1.3.6.1.4.1.412.2.4.10.1.6 |
dMASupportIf true, DMA is supported.ro Enumeration .1.3.6.1.4.1.412.2.4.10.1.7 |
parallelPortCapabilitiesCapabilities of this parallel port. This is a bit field mask
with the bits defined as follows:
Bit 0 (2^0) set = XT/AT compatible,
Bit 1 (2^1) set = PS/2 compatible,
Bit 2 (2^2) set = ECP,
Bit 3 (2^3)
set = EPP,
Bit 4 (2^4) set = PC-98,
Bit 5 (2^5) set = PC-98-Hireso,
Bit 6 (2^6) set = PC-H98ro DmiInteger .1.3.6.1.4.1.412.2.4.10.1.8 |
parallelPortSecuritySettingsAttribute describing the current hardware security settings
on this devicero Enumeration .1.3.6.1.4.1.412.2.4.10.1.10 |
dmtfSerialPortsTableThis group defines the attributes for serial ports in this
system. SEQUENCE OF SdmtfSerialPorts .1.3.6.1.4.1.412.2.4.11 |
dmtfSerialPortsEntryThis group defines the attributes for serial ports in this
system. SdmtfSerialPorts .1.3.6.1.4.1.412.2.4.11.1 |
dmtfSerialPortsStaterw Enumeration .1.3.6.1.4.1.412.2.4.11.1.0 |
serialPortIndexAn index into the serial ports table.ro DmiInteger .1.3.6.1.4.1.412.2.4.11.1.1 |
serialBaseIOAddressBase I/O address for this serial port.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.11.1.2 |
iRQUsedIRQ number that is being used by this serial port.ro DmiInteger .1.3.6.1.4.1.412.2.4.11.1.3 |
logicalNameThe logical name of this serial port under this operating
environment.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.11.1.4 |
connectorTypeThe connector used to interface with the I/O device on this
serial port.ro Enumeration .1.3.6.1.4.1.412.2.4.11.1.5 |
maximumSpeedMaximum transfer speed of the device on this serial port
in bits per second.ro DmiInteger .1.3.6.1.4.1.412.2.4.11.1.6 |
serialPortCapabilitiesThe capabilities of this Serial port.ro Enumeration .1.3.6.1.4.1.412.2.4.11.1.7 |
serialPortSecuritySettingsAttribute describing the current hardware security settings
on this devicero Enumeration .1.3.6.1.4.1.412.2.4.11.1.9 |
dmtfIRQTableThis group defines attributes for IRQs in this system. SEQUENCE OF SdmtfIRQ .1.3.6.1.4.1.412.2.4.12 |
dmtfIRQEntryThis group defines attributes for IRQs in this system. SdmtfIRQ .1.3.6.1.4.1.412.2.4.12.1 |
dmtfIRQStaterw Enumeration .1.3.6.1.4.1.412.2.4.12.1.0 |
iRQNumberThe number of this IRQ.ro DmiInteger .1.3.6.1.4.1.412.2.4.12.1.1 |
iRQAvailabilityIs this IRQ available or in use?ro Enumeration .1.3.6.1.4.1.412.2.4.12.1.2 |
iRQTriggerTypeThe trigger type of the IRQ.ro Enumeration .1.3.6.1.4.1.412.2.4.12.1.3 |
iRQShareableIf true, this IRQ is shareable.ro Enumeration .1.3.6.1.4.1.412.2.4.12.1.4 |
iRQDescriptionThe name of the logical device that is currently using this
IRQ.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.12.1.5 |
dmtfDMATableThis group defines various attributes for the various DMA
channels in this system. SEQUENCE OF SdmtfDMA .1.3.6.1.4.1.412.2.4.13 |
dmtfDMAEntryThis group defines various attributes for the various DMA
channels in this system. SdmtfDMA .1.3.6.1.4.1.412.2.4.13.1 |
dmtfDMAStaterw Enumeration .1.3.6.1.4.1.412.2.4.13.1.0 |
dMANumberThe current DMA channel number.ro DmiInteger .1.3.6.1.4.1.412.2.4.13.1.1 |
dMAChannelAvailabilityIf true, this DMA channel is available.ro Enumeration .1.3.6.1.4.1.412.2.4.13.1.2 |
dMABurstModeIf true, this DMA channel supports burst mode.ro Enumeration .1.3.6.1.4.1.412.2.4.13.1.3 |
dMADescriptionThe name of the logical device that is currently using this
DMA channel.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.13.1.4 |
dmtfMemoryMappedIOTableThis group defines various attributes for memory mapped I/O
on this system. SEQUENCE OF SdmtfMemoryMappedIO .1.3.6.1.4.1.412.2.4.14 |
dmtfMemoryMappedIOEntryThis group defines various attributes for memory mapped I/O
on this system. SdmtfMemoryMappedIO .1.3.6.1.4.1.412.2.4.14.1 |
dmtfMemoryMappedIOStaterw Enumeration .1.3.6.1.4.1.412.2.4.14.1.0 |
memoryMappedIOStartingAddressThe starting address of a contiguous System memory mapped
I/O region.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.14.1.1 |
memoryMappedIOEndingAddressThe ending address of a contiguous System memory mapped I/O
region.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.14.1.2 |
memoryMappedIODescriptionThe name of the logical device currently using this Memory
Mapped I/O.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.14.1.3 |
dmtfSystemEnclosureTableThis group defines the attributes for the system enclosure. SEQUENCE OF SdmtfSystemEnclosure .1.3.6.1.4.1.412.2.4.15 |
dmtfSystemEnclosureEntryThis group defines the attributes for the system enclosure. SdmtfSystemEnclosure .1.3.6.1.4.1.412.2.4.15.1 |
enclosureOrChassisTypeThe type of enclosure.ro Enumeration .1.3.6.1.4.1.412.2.4.15.1.1 |
assetTagThe system asset tag string.rw DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.15.1.2 |
chassisLockPresentIf true, a chassis lock is present.ro Enumeration .1.3.6.1.4.1.412.2.4.15.1.3 |
bootupStateThe current state of this system when it booted.ro Enumeration .1.3.6.1.4.1.412.2.4.15.1.4 |
powerStateThe current state of the power supply for this system.ro Enumeration .1.3.6.1.4.1.412.2.4.15.1.5 |
thermalStateThe current thermal state of this system.ro Enumeration .1.3.6.1.4.1.412.2.4.15.1.6 |
dmtfPowerSupplyTableThis group defines various attributes for power supplies
in this system. SEQUENCE OF SdmtfPowerSupply .1.3.6.1.4.1.412.2.4.16 |
dmtfPowerSupplyTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.16.0 |
dmtfPowerSupplyStatusChangeThe operational status of a power supply
on the system has changed according to the
event severity indicated. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.16.0.1 |
dmtfPowerSupplyPowerControlRequestThe power control setting for a power supply
on the system has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.16.0.2 |
dmtfPowerSupplyEntryThis group defines various attributes for power supplies
in this system. SdmtfPowerSupply .1.3.6.1.4.1.412.2.4.16.1 |
dmtfPowerSupplyStaterw Enumeration .1.3.6.1.4.1.412.2.4.16.1.0 |
powerSupplyIndexThe index number of the current power supply.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.1 |
powerSupplyTypeThis attribute describes the type of Power Supply, e.g. Linear,
Switching, Battery, etc.ro Enumeration .1.3.6.1.4.1.412.2.4.16.1.5 |
inputVoltageCapabilityDescriptionAn expanded description of the Input Voltage Capability for
this Power Supply.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.16.1.6 |
range1InputVoltageLowThe low voltage of Input Voltage Range 1 for this Power Supply,
in millivolts. A value of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.7 |
range1InputVoltageHighThe high voltage of Input Voltage Range 1 for this Power
Supply, in millivolts. A value of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.8 |
range1VoltageProbeIndexIndex into the Voltage Probe table identifying the voltage
probe monitoring this input range. 0 indicates no probe provided.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.9 |
range1ElectricalCurrentProbeIndexIndex into the Elelctrical Current Probe table identifying
the Electrical current probe monitoring this input range. 0 indicates no
probe provided.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.10 |
range2InputVoltageLowThe low voltage of Input Voltage Range 2 for this Power Supply,
in millivolts. A value of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.11 |
range2InputVoltageHighThe high voltage of Input Voltage Range 2 for this Power
Supply, in millivolts. A value of 0x80000000 denotes 'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.12 |
range2VoltageProbeIndexIndex into the Voltage Probe table identifying the voltage
probe monitoring this input range. 0 indicates no probe provided.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.13 |
range2CurrentProbeIndexIndex into the Current Probe table identifying the current
probe monitoring this input range. 0 indicates no probe provided.ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.14 |
activeInputVoltageRangeThe value of this attribute indicates which input voltage
range of this Power Supply is currently active.ro Enumeration .1.3.6.1.4.1.412.2.4.16.1.15 |
inputVoltageRangeSwitchingThis attribute describes the kind of input voltage range
switching that is implemented in this power supply.ro Enumeration .1.3.6.1.4.1.412.2.4.16.1.16 |
range1InputFrequencyLowThe frequency at the low end of this power supply's Input
Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes
'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.17 |
range1InputFrequencyHighThe frequency at the high end of this power supply's Input
Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes
'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.18 |
range2InputFrequencyLowThe frequency at the low end of this power supply's Input
Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes
'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.19 |
range2InputFrequencyHighThe frequency at the high end of this power supply's Input
Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes
'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.20 |
totalOutputPowerThis attribute value represents the total output power of
this power supply in milliWatts. 0x80000000 denotes 'unknown'ro DmiInteger .1.3.6.1.4.1.412.2.4.16.1.21 |
dmtfPowerSupplyEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.16.6 |
dmtfPowerSupplyEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.16.7 |
dmtfCoolingDeviceTableThis group defines various attributes for cooling devices
in this system. SEQUENCE OF SdmtfCoolingDevice .1.3.6.1.4.1.412.2.4.17 |
dmtfCoolingDeviceTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.17.0 |
dmtfCoolingDeviceStatusChangeA cooling device (e.g., fan) on the system
has changed status according to the event
severity indicated.
Improper operation of a system cooling device
can lead to over-heating and eventual breakdown
of the system. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.17.0.1 |
dmtfCoolingDeviceTemperatureFaultA temperature fault has been detected by a cooling
device (e.g., fan) on the system. The system or a
system component is either over-heating or too cold.
Probable causes include an inoperable or obstructed
cooling device; or insufficient ventilation around
the system.
This condition can lead to eventual breakdown
of the system if left unattended. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.17.0.2 |
dmtfCoolingDeviceEntryThis group defines various attributes for cooling devices
in this system. SdmtfCoolingDevice .1.3.6.1.4.1.412.2.4.17.1 |
dmtfCoolingDeviceStaterw Enumeration .1.3.6.1.4.1.412.2.4.17.1.0 |
coolingDeviceTableIndexAn index into the cooling device table.ro DmiInteger .1.3.6.1.4.1.412.2.4.17.1.1 |
coolingDeviceTypeThe type of Cooling Device that this is e.g. Fan, Heat Pipe,
etc.ro Enumeration .1.3.6.1.4.1.412.2.4.17.1.5 |
dmtfCoolingDeviceEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.17.6 |
dmtfCoolingDeviceEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.17.7 |
dmtfSystemSlotTableThis group defines the attributes for the different system
expansion slots supported in this system. SEQUENCE OF SdmtfSystemSlot .1.3.6.1.4.1.412.2.4.18 |
dmtfSystemSlotEntryThis group defines the attributes for the different system
expansion slots supported in this system. SdmtfSystemSlot .1.3.6.1.4.1.412.2.4.18.1 |
dmtfSystemSlotStaterw Enumeration .1.3.6.1.4.1.412.2.4.18.1.0 |
slotIndexAn index into the system slot table. This is the hardware
ID number for each expansion slot, whether it is occupied or not (starting
with 1).ro DmiInteger .1.3.6.1.4.1.412.2.4.18.1.1 |
slotTypeThe bus type supported in this slot. This is a bit field
with the following definitions:
Bit 0 (2^0), if 1, it is a long-length
card;
if 0, it is a short-length card,
Bit 1 (2^1) if set, indicates
ISA,
Bit 2 (2^2) indicates EISA,
Bit 3 (2^3) indicates MCA,
Bit 4 (2^4)
indicates PCI,
Bit 5 (2^5) indicates VL,
Bit 6 (2^6) indicates PCMCIA,
Bit 7 (2^7) refers to NuBus,
Bit 8 (2^8) indicates PC-98/C20,
Bit 9
(2^9) indicates PC-98/C24,
Bit 10 (2^10) indicates PC-98/E,
Bit 11 (2^ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.18.1.2 |
slotWidthThe maximum bus width of cards accepted in this slot.ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.3 |
currentUsageIs this slot is currently in use?ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.4 |
slotDescriptionThe card currently occupying this slot.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.18.1.5 |
slotCategoryThe word 'slot' is used to refer to bus slots. The last case
(motherboard) refers to situations where a functional element is integrated
onto, say, a motherboard and connects to a bus without a connector. It still
takes up an expansion site on the bus but this is termed a 'virtual slot'
as opposed to a physical slot (see the attribute 'Virtual Slot'). Virtual
slots are in effect permanently occupied expansion sites. This attribute
establishes which category of physical slot this table entry is defining.ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.6 |
virtualSlotThis attribute indicates whether this is a 'virtual slot'
or not. A 'virtual slot' is an expansion site that is permanently occupied
because of the level of integration of an expandable component. An example
of a virtual slot is an I/O bus position taken up by a LAN controller that
is integrated onto a motherboard. A slot with the 'Slot Category' of Motherboard
is typically a Virtual Slot.ro Enumeration .1.3.6.1.4.1.412.2.4.18.1.7 |
resourceUserIDValue used to locate the rows in the System Resources 2 table
for the resources associated with this slot or expansion site. 0 = 'unspecified'ro DmiInteger .1.3.6.1.4.1.412.2.4.18.1.8 |
vccMixedVoltageSupportDevice Vcc Mixed Voltage support. This is a bit field with
the following definitions:
Bit 0 (2^0), if set, indicates 3.3V support
Bit 1 (2^1), if set, indicates 5V supportro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.18.1.9 |
vppMixedVoltageSupportDevice Vpp Mixed Voltage support. This is a bit field with
the following definitions:
Bit 0 (2^0), if set, indicates 3.3V support
Bit 1 (2^1), if set, indicates 5V support
Bit 2 (2^2), if set, indicates
12V supportro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.18.1.10 |
slotThermalRatingThe maximum thermal dissipation of the slot in milliwatts.ro DmiInteger .1.3.6.1.4.1.412.2.4.18.1.11 |
dmtfVideoTableThis group defines the attributes of video devices in this
system. SEQUENCE OF SdmtfVideo .1.3.6.1.4.1.412.2.4.19 |
dmtfVideoEntryThis group defines the attributes of video devices in this
system. SdmtfVideo .1.3.6.1.4.1.412.2.4.19.1 |
dmtfVideoStaterw Enumeration .1.3.6.1.4.1.412.2.4.19.1.0 |
videoIndexAn index into the video table.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.1 |
videoTypeThe architecture of the video subsystem in this system.ro Enumeration .1.3.6.1.4.1.412.2.4.19.1.2 |
currentVideoModeThe current video mode in this system.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.3 |
minimumRefreshRateThe minimum refresh rate for this video subsystem in Hz.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.4 |
maximumRefreshRateThe maximum refresh rate for this video subsystem in Hz.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.5 |
videoMemoryTypeThe type of video memory for this adapter.ro Enumeration .1.3.6.1.4.1.412.2.4.19.1.6 |
videoRAMMemorySizeVideo adapter memory size in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.7 |
scanModeThe scan mode for this video device.ro Enumeration .1.3.6.1.4.1.412.2.4.19.1.8 |
videoPhysicalLocationThe location of the video controller circuitry.ro Enumeration .1.3.6.1.4.1.412.2.4.19.1.9 |
currentVerticalResolutionThe current number of vertical pixels.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.10 |
currentHorizontalResolutionThe current number of horizontal pixels.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.11 |
currentNumberOfBitsPerPixelThe number of bits used to display each pixel for this video
device.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.12 |
currentNumberOfRowsThe number of rows in character mode for this video device.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.13 |
currentNumberOfColumnsThe number of columns in character mode for this video device.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.14 |
currentRefreshRateThe current refresh rate in Hz for this video device.ro DmiInteger .1.3.6.1.4.1.412.2.4.19.1.15 |
dmtfVideoBIOSTableThis group defines the attributes for the Video BIOS. SEQUENCE OF SdmtfVideoBIOS .1.3.6.1.4.1.412.2.4.20 |
dmtfVideoBIOSEntryThis group defines the attributes for the Video BIOS. SdmtfVideoBIOS .1.3.6.1.4.1.412.2.4.20.1 |
dmtfVideoBIOSStaterw Enumeration .1.3.6.1.4.1.412.2.4.20.1.0 |
videoBIOSIndexThe index into the Video BIOS table.ro DmiInteger .1.3.6.1.4.1.412.2.4.20.1.1 |
videoBIOSManufacturerThe name of the company that wrote this Video BIOS.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.20.1.2 |
videoBIOSVersionThe version number or version string of this Video BIOS.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.20.1.3 |
videoBIOSReleaseDateThe Video BIOS release date.ro Dmi-Date .1.3.6.1.4.1.412.2.4.20.1.4 |
videoBIOSShadowingStateIf true, the Video BIOS is currently being shadowed.ro Enumeration .1.3.6.1.4.1.412.2.4.20.1.5 |
dmtfVideoBIOSCharacteristicTableThis group defines the characteristics for the Video BIOS. SEQUENCE OF SdmtfVideoBIOSCharacteristic .1.3.6.1.4.1.412.2.4.21 |
dmtfVideoBIOSCharacteristicEntryThis group defines the characteristics for the Video BIOS. SdmtfVideoBIOSCharacteristic .1.3.6.1.4.1.412.2.4.21.1 |
dmtfVideoBIOSCharacteristicStaterw Enumeration .1.3.6.1.4.1.412.2.4.21.1.0 |
videoBIOSCharacteristicIndexThis is an index into the Video BIOS Characteristics table.ro DmiInteger .1.3.6.1.4.1.412.2.4.21.1.1 |
videoBIOSNumberThis is the Video BIOS number which correlates to the Video
BIOS Index.ro DmiInteger .1.3.6.1.4.1.412.2.4.21.1.2 |
videoBIOSCharacteristicThe attributes and extensions supported by this version of
the Video BIOS.ro Enumeration .1.3.6.1.4.1.412.2.4.21.1.3 |
videoBIOSCharacteristicDescriptionExpanded description of this VIDEO BIOS characteristic.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.21.1.4 |
dmtfDisksTableThis group defines the physical attributes of disk mass storage
devices inthis system. SEQUENCE OF SdmtfDisks .1.3.6.1.4.1.412.2.4.22 |
dmtfDisksTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.22.0 |
dmtfDisksStatusChangeThe operational status of a physical disk
on the system has changed, as indicated by
the event severity. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.22.0.1 |
dmtfDisksInitializationErrorA physical disk drive on the system failed
to initialize properly on startup. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.22.0.2 |
dmtfDisksConfigurationErrorA disk drive on the system is not properly configured NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.22.0.3 |
dmtfDisksEntryThis group defines the physical attributes of disk mass storage
devices inthis system. SdmtfDisks .1.3.6.1.4.1.412.2.4.22.1 |
dmtfDisksStaterw Enumeration .1.3.6.1.4.1.412.2.4.22.1.0 |
storageTypeThe type of this mass storage device.ro Enumeration .1.3.6.1.4.1.412.2.4.22.1.1 |
diskIndexAn index into the disk table.ro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.2 |
storageInterfaceTypeThe interface used by this mass storage device.ro Enumeration .1.3.6.1.4.1.412.2.4.22.1.3 |
interfaceDescriptionA longer description of the mass storage interface. For
example, SCSI2 fast wide.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.22.1.4 |
mediaLoadedIf true, the media is loaded.ro Enumeration .1.3.6.1.4.1.412.2.4.22.1.5 |
removableDriveIf true, this drive is removable.ro Enumeration .1.3.6.1.4.1.412.2.4.22.1.6 |
removableMediaIf true, the media in this drive is removable.ro Enumeration .1.3.6.1.4.1.412.2.4.22.1.7 |
logicalUnitNumberThe logical unit number of this SCSI device.ro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.9 |
numberOfPhysicalCylindersThe number of reported physical cylinders on this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.10 |
numberOfPhysicalSectorsPerTrackThe number of reported physical sectors per track for this
device.ro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.11 |
numberOfPhysicalHeadsThe number of reported physical heads for this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.12 |
physicalCylinderForWritePrecompensationSpecifies the physical cylinder used for write precompensation
on this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.13 |
physicalCylinderForLandingZoneThe physical landing zone cylinder of this device.ro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.14 |
sectorSizeThe size in bytes of the physical disk sector or logical
block as reported by the disk.ro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.15 |
totalPhysicalSizeThe total size in kilobytes (1024 bytes) of this device that
is available to usersro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.16 |
numberOfCurrentBadBlocksOrSectorsThe number of current bad blocks or sectors to include total
of both factory assigned and grown defects.ro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.17 |
partitionsThe number of partitions on this storage unit.ro DmiInteger .1.3.6.1.4.1.412.2.4.22.1.18 |
physicalLocationThe physical location of this disk drive assembly relative
to the system enclosure.ro Enumeration .1.3.6.1.4.1.412.2.4.22.1.19 |
dmtfDisksEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.22.6 |
dmtfDisksEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.22.7 |
dmtfDisksMappingTableA table relating disks to partitions. May have an instance
of a disk or partition more than once. SEQUENCE OF SdmtfDisksMappingTable .1.3.6.1.4.1.412.2.4.23 |
dmtfDisksMappingEntryA table relating disks to partitions. May have an instance
of a disk or partition more than once. SdmtfDisksMappingTable .1.3.6.1.4.1.412.2.4.23.1 |
dmtfDisksMappingTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.23.1.0 |
dmtfPartitionTableThis group describes the partitions on particular disks. SEQUENCE OF SdmtfPartition .1.3.6.1.4.1.412.2.4.24 |
dmtfPartitionEntryThis group describes the partitions on particular disks. SdmtfPartition .1.3.6.1.4.1.412.2.4.24.1 |
dmtfPartitionStaterw Enumeration .1.3.6.1.4.1.412.2.4.24.1.0 |
partitionIndexThe index into the partition table.ro DmiInteger .1.3.6.1.4.1.412.2.4.24.1.1 |
partitionNameThe name used by the system to identify the partition. This
is normally the drive letter.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.24.1.2 |
partitionSizeThe size of this partition in kilobytes.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.24.1.3 |
freeSpaceThe number of free kilobytes on this partition.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.24.1.4 |
partitionLabelThe partition label or the unique volume label field for
this physical volume. (For DOS, this is the volume label plus the 32 bit
Volume ID field if available.)ro DmiOctetstring .1.3.6.1.4.1.412.2.4.24.1.5 |
fileSystemThe file system associated with this partition.ro Enumeration .1.3.6.1.4.1.412.2.4.24.1.6 |
compressedIf true, this partition is compressed.ro Enumeration .1.3.6.1.4.1.412.2.4.24.1.7 |
encryptedIf true, this partition is encrypted.ro Enumeration .1.3.6.1.4.1.412.2.4.24.1.8 |
numberOfDisksOccupiedThe number of disks this partition occupies.ro DmiInteger .1.3.6.1.4.1.412.2.4.24.1.9 |
dmtfDiskControllerTableThis group defines the disk controller in this system. SEQUENCE OF SdmtfDiskController .1.3.6.1.4.1.412.2.4.25 |
dmtfDiskControllerTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.25.0 |
dmtfDiskControllerInitializationFailureA disk controller on the system failed to initialize
properly during system startup. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.25.0.1 |
dmtfDiskControllerConfigurationErrorA disk controller on the system is not properly configured NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.25.0.2 |
dmtfDiskControllerEntryThis group defines the disk controller in this system. SdmtfDiskController .1.3.6.1.4.1.412.2.4.25.1 |
dmtfDiskControllerStaterw Enumeration .1.3.6.1.4.1.412.2.4.25.1.0 |
diskControllerIndexIndex value used by the system to identify the disk controller.ro DmiInteger .1.3.6.1.4.1.412.2.4.25.1.1 |
systemSlotIndexIndex value in System Slot table of disk Controller. 0 =
no slotro DmiInteger .1.3.6.1.4.1.412.2.4.25.1.4 |
diskControllerIdentificationName, brand and hardware revision level of the disk controller.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.25.1.5 |
controllerSoftwareRevisionLevelLevel and version of the software associated with this controlle
.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.25.1.6 |
controllerChannelCountThe number of channels supported by this controller. 0x80000000
= Unknownro DmiInteger .1.3.6.1.4.1.412.2.4.25.1.7 |
controllerMaximumDevicesThe maximum number of devices for all channels which can
be controlled by this disk controller. 0x80000000 = Unknownro DmiInteger .1.3.6.1.4.1.412.2.4.25.1.8 |
dmtfDiskControllerEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.25.6 |
dmtfDiskControllerEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.25.7 |
dmtfLogicalDrivesTableThis group defines the attributes of the logical drives in
a system. SEQUENCE OF SdmtfLogicalDrives .1.3.6.1.4.1.412.2.4.26 |
dmtfLogicalDrivesEntryThis group defines the attributes of the logical drives in
a system. SdmtfLogicalDrives .1.3.6.1.4.1.412.2.4.26.1 |
dmtfLogicalDrivesStaterw Enumeration .1.3.6.1.4.1.412.2.4.26.1.0 |
logicalDriveNameName used by the system to identify this logical drive. For
DOS, this could be the logical drive letter (A, B, C...).ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.26.1.2 |
logicalDriveTypeThis defines the logical drive type.ro Enumeration .1.3.6.1.4.1.412.2.4.26.1.3 |
logicalDriveSizeThe size of this logical drive in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.26.1.4 |
freeLogicalDriveSizeThe remaining space on this logical drive in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.26.1.5 |
logicalDrivePathThe path used to access this logical drive (for remote drives).ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.26.1.6 |
dmtfMouseTableThis group defines the characteristics of a mouse input device. SEQUENCE OF SdmtfMouse .1.3.6.1.4.1.412.2.4.27 |
dmtfMouseEntryThis group defines the characteristics of a mouse input device. SdmtfMouse .1.3.6.1.4.1.412.2.4.27.1 |
mouseInterfaceThe interface type of this mouse.ro Enumeration .1.3.6.1.4.1.412.2.4.27.1.1 |
mouseIRQThe IRQ number used by this mouse.ro DmiInteger .1.3.6.1.4.1.412.2.4.27.1.2 |
mouseButtonsThe number of mouse buttons on this mouse.ro DmiInteger .1.3.6.1.4.1.412.2.4.27.1.3 |
mousePortNameThe name of the port currently being used by this mouse.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.27.1.4 |
mouseDriverNameThe name of the mouse driver.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.27.1.5 |
mouseDriverVersionThe version number of the mouse driver.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.27.1.6 |
securitySettingsEnum describing the current hardware security settings on
this devicero Enumeration .1.3.6.1.4.1.412.2.4.27.1.9 |
dmtfKeyboardTableThis group defines the characteristics of the system keyboard. SEQUENCE OF SdmtfKeyboard .1.3.6.1.4.1.412.2.4.28 |
dmtfKeyboardEntryThis group defines the characteristics of the system keyboard. SdmtfKeyboard .1.3.6.1.4.1.412.2.4.28.1 |
keyboardLayoutA description of the layout of this keyboard.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.28.1.1 |
keyboardTypeThe type description of this keyboard.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.28.1.2 |
keyboardConnectorTypeThe type of keyboard connector used by this keyboard.ro Enumeration .1.3.6.1.4.1.412.2.4.28.1.3 |
dmtfFRUTableA Field Replaceable Unit (FRU), is defined as a hardware
component which is designed to be separately removable for replacement or
repair. For the purposes of this definition, a motherboard and a fixed hard
disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place
on the motherboard are not FRUs since they are not designed to be separately
removable. Each instance within the FRU table should contain the device group
and instance data for the associated hardware component. SEQUENCE OF SdmtfFRU .1.3.6.1.4.1.412.2.4.29 |
dmtfFRUEntryA Field Replaceable Unit (FRU), is defined as a hardware
component which is designed to be separately removable for replacement or
repair. For the purposes of this definition, a motherboard and a fixed hard
disk are FRUs, whereas a fixed hard disk platter or a chip fixed in place
on the motherboard are not FRUs since they are not designed to be separately
removable. Each instance within the FRU table should contain the device group
and instance data for the associated hardware component. SdmtfFRU .1.3.6.1.4.1.412.2.4.29.1 |
dmtfFRUStaterw Enumeration .1.3.6.1.4.1.412.2.4.29.1.0 |
fRUIndexThe index into the Field Replaceable Unit table.ro DmiInteger .1.3.6.1.4.1.412.2.4.29.1.1 |
descriptionA clear description of this Field Replaceable Unit.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.29.1.3 |
manufacturerThe name of the company manufacturing or providing this Field
Replaceable Unit.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.29.1.4 |
modelThe manufacturer's model number for this Field Replaceable
Unit.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.29.1.5 |
partNumberA part number by which a replacement part can be ordered
for this Field Replaceable Unit.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.29.1.6 |
fRUSerialNumberThe manufacturer's serial number for this Field Replaceable
Unit.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.29.1.7 |
revisionLevelThe revision level of this Field Replaceable Unit.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.29.1.8 |
warrantyStartDateThe start date of the service warranty for this Field Replaceabl
Unit.ro Dmi-Date .1.3.6.1.4.1.412.2.4.29.1.9 |
warrantyDurationThe total duration of this Field Replaceable Unit warranty
in months.ro DmiInteger .1.3.6.1.4.1.412.2.4.29.1.10 |
supportPhoneNumberThe phone number(s) for support for this Field Replaceable
Unit.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.29.1.11 |
dmtfOperationalStateTableThis group provides the operational state, usage, and availabili
y status,and administrative state indicators for specific Device Group instances SEQUENCE OF SdmtfOperationalState .1.3.6.1.4.1.412.2.4.30 |
dmtfOperationalStateEntryThis group provides the operational state, usage, and availabili
y status,and administrative state indicators for specific Device Group instances SdmtfOperationalState .1.3.6.1.4.1.412.2.4.30.1 |
dmtfOperationalStateStaterw Enumeration .1.3.6.1.4.1.412.2.4.30.1.0 |
operationalStateInstanceIndexThe Index into the Operational State table.ro DmiInteger .1.3.6.1.4.1.412.2.4.30.1.1 |
deviceGroupIndexThe group ID of the group referencing this instance.ro DmiInteger .1.3.6.1.4.1.412.2.4.30.1.2 |
operationalStatusThe operational status of the Device Group instance.ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.3 |
usageStateThe usage state of the Device Group instance.ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.4 |
availabilityStatusThe availability status of the Device Group instance.ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.5 |
administrativeStateThe administrative state of the Device Group instance.ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.6 |
fatalErrorCountThe accumulated Fatal or Non-recoverable error count for
this Device Group instance.ro DmiCounter .1.3.6.1.4.1.412.2.4.30.1.7 |
majorErrorCountThe accumulated Major or Critical error count for this Device
Group instance.ro DmiCounter .1.3.6.1.4.1.412.2.4.30.1.8 |
warningErrorCountThe accumulated Warning or Non-Critical error count for this
Device Group instance.ro DmiCounter .1.3.6.1.4.1.412.2.4.30.1.9 |
currentErrorStatusThis attribute presents the current error status for this
Device Group instance. The most critical error status in effect should be
presented. I.e. if a part of the Device Group instance is 'Critical', while
other status is 'Non-critical' then the status'Critical' should be reported.ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.10 |
devicePredictedFailureStatusEnumeration describing the current Device Predicted Failure
Status (e.g.: the S.M.A.R.T. status of the device).ro Enumeration .1.3.6.1.4.1.412.2.4.30.1.11 |
dmtfSystemResourcesDescriptionTableThe System Resources Description group describes the number
of entries in the System Resources group. SEQUENCE OF SdmtfSystemResourcesDescription .1.3.6.1.4.1.412.2.4.31 |
dmtfSystemResourcesDescriptionEntryThe System Resources Description group describes the number
of entries in the System Resources group. SdmtfSystemResourcesDescription .1.3.6.1.4.1.412.2.4.31.1 |
deviceCountA count of the number of different hardware devices represented
in the System Resources table.ro DmiInteger .1.3.6.1.4.1.412.2.4.31.1.1 |
systemResourceCountA count of the total number of system resources on this system.ro DmiInteger .1.3.6.1.4.1.412.2.4.31.1.2 |
dmtfSystemResourcesTableThe System Resources group contains hardware descriptions
which are commonly used in PC style computers such as IRQs, IO ports and
memory address ranges. SEQUENCE OF SdmtfSystemResources .1.3.6.1.4.1.412.2.4.32 |
dmtfSystemResourcesEntryThe System Resources group contains hardware descriptions
which are commonly used in PC style computers such as IRQs, IO ports and
memory address ranges. SdmtfSystemResources .1.3.6.1.4.1.412.2.4.32.1 |
dmtfSystemResourcesStaterw Enumeration .1.3.6.1.4.1.412.2.4.32.1.0 |
resourceInstanceOn systems that implement a PnP-like subsystem, the device
ID should be the ID used by that subsystem. On systems that do not have inherent
device numbering, then the instrumentation supporting the system resources
group should devise a device numbering scheme. In either case, the table
will naturally group all of the resources associated with a device.ro DmiInteger .1.3.6.1.4.1.412.2.4.32.1.1 |
resourceNumberThis attribute is the ordinal of the resource within a device.
Within the table, any device may have one or more resources.ro DmiInteger .1.3.6.1.4.1.412.2.4.32.1.2 |
resourceTypeThe type of system resource represented by this entry.ro Enumeration .1.3.6.1.4.1.412.2.4.32.1.3 |
resourceBaseThe starting address of the system resource in the appropriate
address space.ro DmiInteger .1.3.6.1.4.1.412.2.4.32.1.4 |
resourceSizeThe size of the system resource.ro DmiInteger .1.3.6.1.4.1.412.2.4.32.1.5 |
resourceFlagsThis attribute contains fields representing the status of
this resource entry. The meaning of this field varies according to the Resource
Type field in this group.ro DmiInteger .1.3.6.1.4.1.412.2.4.32.1.6 |
resourceGroupIDThis attribute is a 'back pointer' to a group within the
system MIF, if applicable. If the back pointer is not known, either because
the device is not represented by a group, or the actual device type is not
known, then the value of this attribute will be 0.ro DmiInteger .1.3.6.1.4.1.412.2.4.32.1.7 |
dmtfPhysicalMemoryArrayTableThis group represents an array of physical memory as a collectio
of one or more Memory Devices associated in sets and partitions. SEQUENCE OF SdmtfPhysicalMemoryArray .1.3.6.1.4.1.412.2.4.33 |
dmtfPhysicalMemoryArrayTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.33.0 |
dmtfPhysicalMemoryArrayErrorA physical memory module in the system has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.33.0.1 |
dmtfPhysicalMemoryArrayInitializationFailureA physical memory module in the system failed
to initialize properly during system startup. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.33.0.2 |
dmtfPhysicalMemoryArrayEntryThis group represents an array of physical memory as a collectio
of one or more Memory Devices associated in sets and partitions. SdmtfPhysicalMemoryArray .1.3.6.1.4.1.412.2.4.33.1 |
dmtfPhysicalMemoryArrayStaterw Enumeration .1.3.6.1.4.1.412.2.4.33.1.0 |
memoryArrayTableIndexA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.1 |
memoryArrayLocationThe physical location of the Memory Array, whether on the
system board or an add-on board.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.2 |
memoryArrayUseWhat this Memory Array is used for.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.3 |
numberOfMemoryDeviceSocketsThe number of SIMM slots or sockets available for Memory
Devices in this array. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.5 |
numberOfMemoryDeviceSocketsUsedThe number of SIMM slots or sockets in use for Memory Devices
in this array. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.6 |
arrayErrorTypeThe type of error that is associated with the current status
reported in Operational State for this Memory Array.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.8 |
lastErrorUpdateSystem state during which last error status was collected.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.9 |
errorOperationThe memory access operation that caused the current error.ro Enumeration .1.3.6.1.4.1.412.2.4.33.1.10 |
errorDataSizeThe size of the data transfer that caused the error, in bits.
Zero indicates no error, 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.11 |
errorDataData captured during the erroneous Memory Array access. The
data occupy the first n bytes of the octet string required to hold 'Error
Data Size' bits of the data. Data are stored least-significant byte first.ro DmiOctetstring .1.3.6.1.4.1.412.2.4.33.1.12 |
vendorSyndromeVendor-specific syndrome or CRC data associated with the
erroneous access.ro DmiOctetstring .1.3.6.1.4.1.412.2.4.33.1.13 |
errorAddressPhysical address of the error based on the addressing of
the bus that the Memory Array is connected to. 0x8000 0000 0000 0000 denotes
'unknown'.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.33.1.14 |
errorResolutionRange in bytes that the error can be determined to be within,
when an Error Address is given. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.33.1.15 |
dmtfPhysicalMemoryArrayEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.33.6 |
dmtfPhysicalMemoryArrayEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.33.7 |
dmtfMemoryArrayMappedAddressesTableThis table presents ranges of physical addresses that are
mapped to a given Memory Array. SEQUENCE OF SdmtfMemoryArrayMappedAddresses .1.3.6.1.4.1.412.2.4.34 |
dmtfMemoryArrayMappedAddressesEntryThis table presents ranges of physical addresses that are
mapped to a given Memory Array. SdmtfMemoryArrayMappedAddresses .1.3.6.1.4.1.412.2.4.34.1 |
dmtfMemoryArrayMappedAddressesStaterw Enumeration .1.3.6.1.4.1.412.2.4.34.1.0 |
memoryArrayMappedAddressesTableIndexA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.412.2.4.34.1.1 |
partitionIDIdentifies a Memory Partition associated with the Memory
Array specified by Memory Array Table Index. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.34.1.5 |
partitionWidthThe number of Memory Devices that form a single row of memory
for the partition. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.34.1.6 |
dmtfMemoryDeviceTableThis group presents information about individual memory devices
in the system. A memory device can be a SIMM, a SIPP, or a single chip, or
an entire card-based on the resolution to which a memory error can be determined
and whether the device is replaceable as a unit. SEQUENCE OF SdmtfMemoryDevice .1.3.6.1.4.1.412.2.4.35 |
dmtfMemoryDeviceEntryThis group presents information about individual memory devices
in the system. A memory device can be a SIMM, a SIPP, or a single chip, or
an entire card-based on the resolution to which a memory error can be determined
and whether the device is replaceable as a unit. SdmtfMemoryDevice .1.3.6.1.4.1.412.2.4.35.1 |
dmtfMemoryDeviceStaterw Enumeration .1.3.6.1.4.1.412.2.4.35.1.0 |
memoryDeviceTableIndexA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.1 |
memoryArrayIndexThe ID of the Memory Array that this Memory Device is a part
of.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.2 |
deviceLocatorA string identifying the physically labeled socket or board
position where the memory device is located. Eg. 'SIMM 3' or 'IC12'.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.35.1.3 |
bankLocatorA string identifying the physically labeled bank where the
memory device is located. Eg. 'Bank 0' or 'A'.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.35.1.4 |
sizeSize of this memory device, in bytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.5 |
formFactorImplementation form factor for this memory device.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.6 |
totalWidthTotal width of this memory device, including check or error
correction bits, in bits. If there are no error correction bits, the value
in this attribute should match that specified in Data Width. 0x80000000
denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.7 |
dataWidthData width of this memory device, in bits. A data width of
0 and a Total Width of 8 would indicate that the device is solely being used
to provide eight error correction bits. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.8 |
memoryTypeType of memory used in this memory device.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.9 |
typeDetailAdditional detail on the device type.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.10 |
deviceSetThis attribute is used to identify when the Memory Device
is one of a set of Memory Devices that must be populated with all devices
of the same type and size, and which set the device belongs to. For example,
when one SIMM belongs to a set of four. 0 indicates the Memory Device isn't
part of a set. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.11 |
deviceErrorTypeThe type of error that is associated with the current status
reported in Operational State for this Memory Device.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.12 |
errorGranularitySpecifies whether the current error's location can be resolved
to the partition or device level.ro Enumeration .1.3.6.1.4.1.412.2.4.35.1.13 |
deviceErrorAddressPhysical address of the error relative to the start of the
device, in bytes. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.19 |
arrayErrorAddressPhysical address of the kilobyte where the error is located,
relative to the bus for the Memory Array. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.35.1.20 |
dmtfMemoryDeviceMappedAddressesTableThis table presents ranges of physical addresses that are
mapped to a given Memory Device Set. SEQUENCE OF SdmtfMemoryDeviceMappedAddresses .1.3.6.1.4.1.412.2.4.36 |
dmtfMemoryDeviceMappedAddressesEntryThis table presents ranges of physical addresses that are
mapped to a given Memory Device Set. SdmtfMemoryDeviceMappedAddresses .1.3.6.1.4.1.412.2.4.36.1 |
dmtfMemoryDeviceMappedAddressesStaterw Enumeration .1.3.6.1.4.1.412.2.4.36.1.0 |
memoryDeviceMappedAddressesTableIndexA unique number that identifies this row.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.1 |
memoryDeviceSetIDThe row in the Memory Device table that this address range
is for. This matches with a Memory Device Table Index. There may be multiple
rows in Memory Device Mapped addresses for a single Memory Device.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.2 |
partitionIdentifies the Memory partition in the Memory Array Mapped
Addresses table that this Memory Device is part of. Partition number should
be positive. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.3 |
mappedRangeStartingAddressThe physical starting address, in kilobytes, of a range of
memory mapped to the specified Memory Device set. The address is specified
relative to the bus that the device is connected to. 0x80000000 denotes 'unknown
.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.4 |
mappedRangeEndingAddressThe physical ending address of the last kilobyte of a range
of addresses mapped to the specified Memory Device. The address is specified
relative to the bus that the device is connected to. 0x80000000 denotes 'unknown
.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.5 |
partitionRowPositionThis specifies the position of the device in a row of the
partition. For example, if it takes two 8-bit memory devices to form a 16-bit
row, then a value of '2'in this attribute means the device is the second
device. 0 is an invalid return value. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.6 |
interleavePositionThe position of this device in an interleave. 0 indicates
non-interleaved. 1 indicates the first position 2 the second, and so on.
For example, in a 2:1 interleave, a value of '1' would indicate the device
is in the 'even' position, in a 4:1 interleave this would be the first of
four possible positions). 0x80000000 denotes 'unknown' or'unsupported'.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.7 |
dataDepthThe maximum number of consecutive rows accessed from this
device in a single interleaved transfer. For example, if a device transfers
two rows each time it is read, its Interleaved Data Depth would be 2. If
that device is 2:1 interleaved and in Interleave Position '1', then the rows
mapped to that device would be rows 1,2,5,6,9,10, etc. If the device is not
part of an interleave, this value should be 0. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.36.1.8 |
dmtfSystemResources2TableThis group describes the base level of Memory, I/O, DMA,
and INT (interrupt) resources that are used by a device in the system. SEQUENCE OF SdmtfSystemResources2 .1.3.6.1.4.1.412.2.4.37 |
dmtfSystemResources2EntryThis group describes the base level of Memory, I/O, DMA,
and INT (interrupt) resources that are used by a device in the system. SdmtfSystemResources2 .1.3.6.1.4.1.412.2.4.37.1 |
dmtfSystemResources2Staterw Enumeration .1.3.6.1.4.1.412.2.4.37.1.0 |
systemResourcesIndexA number that uniquely identifies the rows in this table.ro DmiInteger .1.3.6.1.4.1.412.2.4.37.1.1 |
resourceUserA unique number for each different 'resource user' that has
resources specified in this table.ro DmiInteger .1.3.6.1.4.1.412.2.4.37.1.2 |
resourceSetA number used as the ID of a set of Memory, I/O, DMA and/or
INT resources for the resource user.ro DmiInteger .1.3.6.1.4.1.412.2.4.37.1.3 |
resourceAssignmentDescribes the state of the assignment of this set of resources.
(Note: This value must be the same for all resources within a given set.)ro Enumeration .1.3.6.1.4.1.412.2.4.37.1.4 |
resourceInfoIDID of the row in the 'Info' table for this type of system
resource. E.g. if this Resource Type is 'I/O' then this would be an index
into the 'System Resource I/O Info' table.ro DmiInteger .1.3.6.1.4.1.412.2.4.37.1.7 |
startAddressStarting physical address for this memory range, or the minimum
base address if this attribute is being used to describe a programmable range.
0 for IRQ and DMA resources.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.37.1.8 |
endAddressEnding physical address (address of last byte) for this memory
range, or the maximum configurable base address if this attribute is being
used to describe a programmable range. 0 for IRQ and DMA resources.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.37.1.9 |
baseAlignmentAlignment of Start Address, in bytes. Indicates the granularity
of the increments in which a programmable range can be set.ro DmiInteger .1.3.6.1.4.1.412.2.4.37.1.11 |
shareableIndicates whether the resource is shareable.ro Enumeration .1.3.6.1.4.1.412.2.4.37.1.12 |
sharedIndicates whether this resource, or a portion of this resource,
is shared with another device.ro Enumeration .1.3.6.1.4.1.412.2.4.37.1.13 |
dmtfSystemResourceDeviceInfoTableThis group describes the base level of Memory, I/O, DMA,
and INT (interrupt) resources that are used by a device in the system. SEQUENCE OF SdmtfSystemResourceDeviceInfo .1.3.6.1.4.1.412.2.4.38 |
dmtfSystemResourceDeviceInfoEntryThis group describes the base level of Memory, I/O, DMA,
and INT (interrupt) resources that are used by a device in the system. SdmtfSystemResourceDeviceInfo .1.3.6.1.4.1.412.2.4.38.1 |
dmtfSystemResourceDeviceInfoStaterw Enumeration .1.3.6.1.4.1.412.2.4.38.1.0 |
deviceIDPhysical Device ID from Config manager info. Equal to the
CISTPL-MANFID field for PCMCIA devices. 0xFFFFFFFF = Unknownro DmiInteger .1.3.6.1.4.1.412.2.4.38.1.2 |
deviceSerialNumberDevice Serial Number from Config manager info. 0 = Undefinedro DmiInteger .1.3.6.1.4.1.412.2.4.38.1.3 |
logicalDeviceIDClassCodeLogical device ID for PnP ISA devices, Class code for PCI
devices, CISTPL-FUNCID for PCMCIA devices. 0xFFFFFFFF = Undefined, 0 = reservedro DmiInteger .1.3.6.1.4.1.412.2.4.38.1.4 |
deviceFlagsDevice flags from config manager info. Bit 0: 1 = device
has been initialized,
Bit 1: 1 = device is enabled,
Bit 2: 1 = device
config has been locked,
Bit 3: 1 = device has temporary config resources
assigned,
Bit 4: 1 = device is reconfigurablero DmiInteger .1.3.6.1.4.1.412.2.4.38.1.5 |
deviceNumberDevice Number for PCI Devices, Logical Device number for
PnP Devices. 0 otherwise.ro DmiInteger .1.3.6.1.4.1.412.2.4.38.1.6 |
functionNumberFunction Number for PCI & EISA Devices. 0 otherwise.ro DmiInteger .1.3.6.1.4.1.412.2.4.38.1.7 |
busTypeBus number (0-255) for PCI Devices, Slot number for EISA
and PnP Devices, Card logical socket number for PCMCIA devices. Zero otherwise.ro DmiInteger .1.3.6.1.4.1.412.2.4.38.1.8 |
cMReservedData from the Reserved field of the Configuration Manager
bus access structure, or 0.ro DmiInteger .1.3.6.1.4.1.412.2.4.38.1.9 |
dmtfSystemResourceMemoryInfoTableThis group presents additional information about memory resource
that have been defined in the System Resources table. SEQUENCE OF SdmtfSystemResourceMemoryInfo .1.3.6.1.4.1.412.2.4.39 |
dmtfSystemResourceMemoryInfoEntryThis group presents additional information about memory resource
that have been defined in the System Resources table. SdmtfSystemResourceMemoryInfo .1.3.6.1.4.1.412.2.4.39.1 |
dmtfSystemResourceMemoryInfoStaterw Enumeration .1.3.6.1.4.1.412.2.4.39.1.0 |
systemResourceMemoryInfoIndexA number the uniquely identifies rows in this table.ro DmiInteger .1.3.6.1.4.1.412.2.4.39.1.1 |
iSAPCMCIARangeDescriptorFor PnP ISA/PCMCIA memory range descriptor compatibility.ro Enumeration .1.3.6.1.4.1.412.2.4.39.1.2 |
eISARangeDescriptorFor PnP EISA memory range descriptor compatibility.ro Enumeration .1.3.6.1.4.1.412.2.4.39.1.3 |
decodeSupportFor PnP memory range descriptor compatibility.ro Enumeration .1.3.6.1.4.1.412.2.4.39.1.4 |
cacheableIndicates whether it is allowable for this memory range to
be cached or not.ro Enumeration .1.3.6.1.4.1.412.2.4.39.1.5 |
cacheTypeIndicates Cache Type that is compatible with this resource.ro Enumeration .1.3.6.1.4.1.412.2.4.39.1.6 |
readWriteIndicates the read-write accessibility of this memory resource.ro Enumeration .1.3.6.1.4.1.412.2.4.39.1.7 |
dmtfSystemResourceIOInfoTableThis group presents additional information about I/O resources
that have been defined in the System Resources table. SEQUENCE OF SdmtfSystemResourceIOInfo .1.3.6.1.4.1.412.2.4.40 |
dmtfSystemResourceIOInfoEntryThis group presents additional information about I/O resources
that have been defined in the System Resources table. SdmtfSystemResourceIOInfo .1.3.6.1.4.1.412.2.4.40.1 |
dmtfSystemResourceIOInfoStaterw Enumeration .1.3.6.1.4.1.412.2.4.40.1.0 |
systemResourceIOInfoIndexA number the uniquely identifies rows in this table.ro DmiInteger .1.3.6.1.4.1.412.2.4.40.1.1 |
iODecodeNumber of bits used for I/O decodero Enumeration .1.3.6.1.4.1.412.2.4.40.1.2 |
dmtfSystemResourceIRQInfoTableThis group presents additional information about I/O resources
that have been defined in the System Resources table. SEQUENCE OF SdmtfSystemResourceIRQInfo .1.3.6.1.4.1.412.2.4.41 |
dmtfSystemResourceIRQInfoEntryThis group presents additional information about I/O resources
that have been defined in the System Resources table. SdmtfSystemResourceIRQInfo .1.3.6.1.4.1.412.2.4.41.1 |
dmtfSystemResourceIRQInfoStaterw Enumeration .1.3.6.1.4.1.412.2.4.41.1.0 |
systemResourceIRQInfoIndexA number the uniquely identifies rows in this table.ro DmiInteger .1.3.6.1.4.1.412.2.4.41.1.1 |
triggerTypeThe trigger type for this interrupt.ro Enumeration .1.3.6.1.4.1.412.2.4.41.1.2 |
triggerLevelThe trigger level for this interrupt.ro Enumeration .1.3.6.1.4.1.412.2.4.41.1.3 |
dmtfSystemResourceDMAInfoTableThis group presents additional information about DMA resources
that have been defined in the System Resources table. SEQUENCE OF SdmtfSystemResourceDMAInfo .1.3.6.1.4.1.412.2.4.42 |
dmtfSystemResourceDMAInfoEntryThis group presents additional information about DMA resources
that have been defined in the System Resources table. SdmtfSystemResourceDMAInfo .1.3.6.1.4.1.412.2.4.42.1 |
dmtfSystemResourceDMAInfoStaterw Enumeration .1.3.6.1.4.1.412.2.4.42.1.0 |
systemResourceDMAInfoIndexA number the uniquely identifies rows in this table.ro DmiInteger .1.3.6.1.4.1.412.2.4.42.1.1 |
dMATransferWidthWidth of DMA transfers supportedro Enumeration .1.3.6.1.4.1.412.2.4.42.1.2 |
dMAAddressSizeThe width of the DMA address.ro Enumeration .1.3.6.1.4.1.412.2.4.42.1.3 |
dMAMaximumTransferSizeThe maximum number of bytes that can be transferred by this
DMA Channel.ro DmiInteger .1.3.6.1.4.1.412.2.4.42.1.4 |
dMATransferPreferenceDMA transfer type preference.ro Enumeration .1.3.6.1.4.1.412.2.4.42.1.5 |
busMasterIndicates whether the device is using DMA is a bus master.ro Enumeration .1.3.6.1.4.1.412.2.4.42.1.6 |
byteModeIndicates whether DMA may execute in 'count by byte' mode.ro Enumeration .1.3.6.1.4.1.412.2.4.42.1.7 |
wordModeIndicates whether DMA may execute in 'count by word' mode.ro Enumeration .1.3.6.1.4.1.412.2.4.42.1.8 |
channelTimingDMA channel speed support.ro Enumeration .1.3.6.1.4.1.412.2.4.42.1.9 |
typeCTimingIndicates whether C type (burst) timing is supported.ro Enumeration .1.3.6.1.4.1.412.2.4.42.1.10 |
dmtfMassStoreMappingTableThis table represents mappings between logical drives and
logical or physical drive segments. Each entry in this table describes *one*
such mapping. A logical drive may be composed of one, *or more*, such mappings.
A segment may be a part of a physical or logical drive or, in the degenerate
case, the entire drive may be one segment. The table also contains two fields,
namely: (a) 'Parent Drive' a unique index into the Mass Store Logical Drives
Table describing the logical drive involved in the mapping, SEQUENCE OF SdmtfMassStoreMappingTable .1.3.6.1.4.1.412.2.4.43 |
dmtfMassStoreMappingEntryThis table represents mappings between logical drives and
logical or physical drive segments. Each entry in this table describes *one*
such mapping. A logical drive may be composed of one, *or more*, such mappings.
A segment may be a part of a physical or logical drive or, in the degenerate
case, the entire drive may be one segment. The table also contains two fields,
namely: (a) 'Parent Drive' a unique index into the Mass Store Logical Drives
Table describing the logical drive involved in the mapping, SdmtfMassStoreMappingTable .1.3.6.1.4.1.412.2.4.43.1 |
dmtfMassStoreMappingTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.43.1.0 |
mappingIndexUnique index into the Mass Store Mapping Tablero DmiInteger .1.3.6.1.4.1.412.2.4.43.1.1 |
parentDriveUnique index into the Mass Store Logical Drives Table of
the entry that represents the parent drive in this mapping.ro DmiInteger .1.3.6.1.4.1.412.2.4.43.1.2 |
childSegmentThis field contains the index of the logical or physical
segment that is one of the constituents of the parent logical drive referenced
by the attribute 'Parent Drive'.This index is a key into the Mass Store Segment
Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.43.1.3 |
dmtfMassStoreSegmentTableThis table describes the various segments on the various
physical or logical drives in the component. In some cases a segment may
represent an entire drive. In other cases there may be multiple segments
on a drive. SEQUENCE OF SdmtfMassStoreSegmentTable .1.3.6.1.4.1.412.2.4.44 |
dmtfMassStoreSegmentEntryThis table describes the various segments on the various
physical or logical drives in the component. In some cases a segment may
represent an entire drive. In other cases there may be multiple segments
on a drive. SdmtfMassStoreSegmentTable .1.3.6.1.4.1.412.2.4.44.1 |
dmtfMassStoreSegmentTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.44.1.0 |
segmentIndexThis is a unique index for this segment and is used as a
key into this tablero DmiInteger .1.3.6.1.4.1.412.2.4.44.1.1 |
segmentTypeDescribes whether the segment is a physical segment on a
physical drive or a logical segment on a logical drive. If the value of this
attribute is 'Physical' then the physical drive is identified in the Disks
table by Drive Key 1 and Drive Key 2 attributes. If the value of this attribute
is 'Logical' then the logical drive is identified in the Mass Store Logical
Drives table by the Drive Key 2 attribute and the Drive Key 1 attribute is
irrelevantro Enumeration .1.3.6.1.4.1.412.2.4.44.1.2 |
segmentStartThis is the index of the allocation unit on the drive at
which the media extent corresponding to this segment starts.ro DmiInteger .1.3.6.1.4.1.412.2.4.44.1.3 |
segmentLengthThis is the length of the segment in allocation units inclusive
of the starting allocation unit whose index is contained in the attribute
'Segment Start'.ro DmiInteger .1.3.6.1.4.1.412.2.4.44.1.4 |
segmentAllocationUnitThe value of this attribute identifies the type of unit of
space that can be allocated on the drive.ro Enumeration .1.3.6.1.4.1.412.2.4.44.1.5 |
segmentAllocationStateThe value of this attribute identifies the current allocation
state of the segment represented by this table entry. NOTE: Reserved = This
segment is reserved for vendor use (DO NOT USE this segment for other purposes);
Spare = This segment is currently in use being held in reserve for hot sparing.ro Enumeration .1.3.6.1.4.1.412.2.4.44.1.6 |
driveKey1If Segment Type is 'Physical' this is one of two keys used
to identify a specific disk in the Disks group. If the Segment Type is 'Logical'
this attribute is unused and its value is irrelevant.ro Enumeration .1.3.6.1.4.1.412.2.4.44.1.7 |
driveKey2(A) If the value of the attribute Segment Type is 'Physical'
then this attribute holds the second of two keys that identify the physical
drive in the Disks table group. (B) If the value of the Segment Type is 'Logical
then this is the single integer key that identifies the logical drive in
the Mass Store Logical Drives table.ro DmiInteger .1.3.6.1.4.1.412.2.4.44.1.8 |
dmtfMassStoreLogicalDrivesTableThis table describes the logical drives contained in this
component. Logical drives are typically composed of one or more other logical
drives or physical segments. Each entry of this table contains information
about the size of a logical drive, its string name as set by driver software,
and a boolean that describes whether this logical drive is at the top of
the logical drive hierarchy or not. SEQUENCE OF SdmtfMassStoreLogicalDrivesTable .1.3.6.1.4.1.412.2.4.45 |
dmtfMassStoreLogicalDrivesTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.45.0 |
dmtfMassStoreLogicalDrivesPhysicalDeviceStatusChangeThe status of a Logical Disk Drive
(e.g., file system volume) has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.45.0.1 |
dmtfMassStoreLogicalDrivesHotSpareActivatedThe 'hot-swap spare' for an inoperable
logical disk drive has been activated. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.45.0.2 |
dmtfMassStoreLogicalDrivesLogicalDeviceStatusChangelogicalDeviceStatusChange NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.45.0.3 |
dmtfMassStoreLogicalDrivesInitializationFailureA logical disk drive on the system failed to
initialize properly during system startup. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.45.0.4 |
dmtfMassStoreLogicalDrivesConfigurationErrorA logical disk drive on the system is not properly configured NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.45.0.5 |
dmtfMassStoreLogicalDrivesEntryThis table describes the logical drives contained in this
component. Logical drives are typically composed of one or more other logical
drives or physical segments. Each entry of this table contains information
about the size of a logical drive, its string name as set by driver software,
and a boolean that describes whether this logical drive is at the top of
the logical drive hierarchy or not. SdmtfMassStoreLogicalDrivesTable .1.3.6.1.4.1.412.2.4.45.1 |
dmtfMassStoreLogicalDrivesTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.45.1.0 |
logicalDriveIndexA unique index (key) into the Mass Store Logical Drives Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.45.1.1 |
topOfHierarchyThis attribute identifies whether the logical drive represented
by this entry is a part of some higher order logical drive or not. If the
value of this boolean attribute is TRUE, then this means that this logical
drive is not a constituent part of any other logical drive in this component.ro Enumeration .1.3.6.1.4.1.412.2.4.45.1.2 |
driveArrayThis boolean attribute identifies whether the logical drive
represented by this table entry is composed of an array of drives or not.
If the value of this attribute is TRUE, then the entry with the same index
(as this entry) in the Mass Store Array Info Table will give information
about the drive array that comprises this logical drivero Enumeration .1.3.6.1.4.1.412.2.4.45.1.3 |
logicalDriveSizeInKBThis attribute holds the size of this logical drive in kilobytesro DmiInteger .1.3.6.1.4.1.412.2.4.45.1.4 |
logicalDriveBlockSizeInBytesThis attribute holds the size of the allocatable unit of
storage on this logical drive. The size of the allocatable unit is given
in bytesro DmiInteger .1.3.6.1.4.1.412.2.4.45.1.5 |
logicalDriveNameStringThis attribute is simply a container for a string name for
the logical drive. The instrumentation code does not assign or manipulate
this attribute. It is simply a convenience provided so that driver software
may put in this container the string name by which it refers to this logical
drive.rw DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.45.1.6 |
dmtfMassStoreLogicalDrivesEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.45.6 |
dmtfMassStoreLogicalDrivesEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.45.7 |
dmtfMassStoreArrayInfoTableThis table is a parallel table to the Mass Store Logical
Drives Table; it has entries keyed by the same unique index as is used for
the logical drives table. This table has one entry corresponding to each
entry in the Mass Store Logical Drives Table whose 'Drive Array' field is
set to TRUE. SEQUENCE OF SdmtfMassStoreArrayInfoTable .1.3.6.1.4.1.412.2.4.46 |
dmtfMassStoreArrayInfoEntryThis table is a parallel table to the Mass Store Logical
Drives Table; it has entries keyed by the same unique index as is used for
the logical drives table. This table has one entry corresponding to each
entry in the Mass Store Logical Drives Table whose 'Drive Array' field is
set to TRUE. SdmtfMassStoreArrayInfoTable .1.3.6.1.4.1.412.2.4.46.1 |
dmtfMassStoreArrayInfoTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.46.1.0 |
driveArrayLevelThis attribute is an Enum of the different possible types
of drive arrays that could compose the logical drive represented by the correspo
ding entry in the Mass Store Logical Drives Table.ro Enumeration .1.3.6.1.4.1.412.2.4.46.1.2 |
driveArrayRedundancyStatusThis attribute identifies which of the different states of
the available redundancy in the drive array currently applies.ro Enumeration .1.3.6.1.4.1.412.2.4.46.1.5 |
driveArrayOperationInProgressThis value of this attribute describes whether the drive
array is currently undergoing array operations of some sort.ro Enumeration .1.3.6.1.4.1.412.2.4.46.1.6 |
dmtfSequentialAccessDevicesTableThis table describes each sequential access device in the
system. SEQUENCE OF SdmtfSequentialAccessDevices .1.3.6.1.4.1.412.2.4.47 |
dmtfSequentialAccessDevicesEntryThis table describes each sequential access device in the
system. SdmtfSequentialAccessDevices .1.3.6.1.4.1.412.2.4.47.1 |
dmtfSequentialAccessDevicesStaterw Enumeration .1.3.6.1.4.1.412.2.4.47.1.0 |
sequentialAccessIndexUnique index into the Sequential Access Devices table for
this Sequential Access Device.ro DmiInteger .1.3.6.1.4.1.412.2.4.47.1.1 |
maximumSequentialMediaSizeMaximum size, in KB, of media supported by this devicero DmiInteger .1.3.6.1.4.1.412.2.4.47.1.2 |
currentSequentialMediaSizeCurrent size, in KB, of media in this drive.ro DmiInteger .1.3.6.1.4.1.412.2.4.47.1.3 |
sequentialMediaPresentIndicates the presence of a media in the drive.ro Enumeration .1.3.6.1.4.1.412.2.4.47.1.4 |
sequentialMediaTechnologyIndicates the type of tapes supported by the drive.ro Enumeration .1.3.6.1.4.1.412.2.4.47.1.5 |
dmtfSystemResetTableThis group defines whether Automatic System Reset functions
are available (Capability) and enabled (Status). If the system has a watchdog
Timer and the timer is not reset (Timer Reset) before the Interval elapses,
an automatic system reset will occur. The system will re-boot according to
the Boot Option. This function may repeat until the Limit is reached, at
which time the system will re-boot according to the Boot Option at Limit. SEQUENCE OF SdmtfSystemReset .1.3.6.1.4.1.412.2.4.48 |
dmtfSystemResetTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.48.0 |
dmtfSystemResetSystemUpThe system is up and running after having
automatically re-booted due to some (abnormal)
reset condition. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.48.0.1 |
dmtfSystemResetEntryThis group defines whether Automatic System Reset functions
are available (Capability) and enabled (Status). If the system has a watchdog
Timer and the timer is not reset (Timer Reset) before the Interval elapses,
an automatic system reset will occur. The system will re-boot according to
the Boot Option. This function may repeat until the Limit is reached, at
which time the system will re-boot according to the Boot Option at Limit. SdmtfSystemReset .1.3.6.1.4.1.412.2.4.48.1 |
automaticSystemResetCapabilityIndicates whether Automatic System Reset Capability is available
for the current operating system.ro Enumeration .1.3.6.1.4.1.412.2.4.48.1.1 |
automaticSystemResetStatusIndicates whether Automatic System Reset is enabled by the
user.rw Enumeration .1.3.6.1.4.1.412.2.4.48.1.2 |
automaticSystemResetBootOptionIndicates whether Automatic System Reset will boot to the
operating system, boot to utilities, or not re-boot. This is the action to
be taken following a reset.rw Enumeration .1.3.6.1.4.1.412.2.4.48.1.3 |
automaticSystemResetCountThe number of Automatic System Resets since last intentional
reset. A value of 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.48.1.4 |
automaticSystemResetLimitThe number of consecutive times the Automatic System Reset
will be attempted. A value of 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.48.1.5 |
automaticSystemResetBootOptionAtLimitIndicates the action to be taken when the Automatic System
Reset Limit is reached.rw Enumeration .1.3.6.1.4.1.412.2.4.48.1.6 |
automaticSystemResetTimerPresentIndicates whether this system has a watchdog timer.rw Enumeration .1.3.6.1.4.1.412.2.4.48.1.7 |
automaticSystemResetTimerIntervalThe number of minutes to use for watchdog timer. If the timer
is not reset within this interval, the automatic system reset timeout will
begin. A value of 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.48.1.8 |
automaticSystemResetTimerResetInitiate the reset of the automatic system reset watchdog
timer. Setting this attribute to True will cause the watchdog timer to reset.rw Enumeration .1.3.6.1.4.1.412.2.4.48.1.9 |
systemResetTimeoutThis attribute identifies the number of minutes before the
re-boot is initiated. It is used after system power cycle, system reset (local
or remote), and automatic system reset. A value of 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.48.1.10 |
systemResetBootOptionIndicates whether to boot to the operating system or the
utilities when a system reset or system power cycle is performed, either
locally or remotely.rw Enumeration .1.3.6.1.4.1.412.2.4.48.1.11 |
dmtfSystemResetEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.48.6 |
dmtfSystemResetEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.48.7 |
dmtfSystemHardwareSecurityTableThis group describes the system-wide hardware security settings. SEQUENCE OF SdmtfSystemHardwareSecurity .1.3.6.1.4.1.412.2.4.49 |
dmtfSystemHardwareSecurityTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.49.0 |
dmtfSystemHardwareSecuritySettingsChangeThe security settings for the system hardware have changed. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.49.0.1 |
dmtfSystemHardwareSecurityContainerSecurityBreachA secruity breach of the system hardware has occured.
A secured component of the physical system has been
accessed without proper authorization. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.49.0.2 |
dmtfSystemHardwareSecurityEntryThis group describes the system-wide hardware security settings. SdmtfSystemHardwareSecurity .1.3.6.1.4.1.412.2.4.49.1 |
powerOnPasswordStatusThe current power-on password setting on the system.ro Enumeration .1.3.6.1.4.1.412.2.4.49.1.1 |
keyboardPasswordStatusThe current keyboard password setting on the systemro Enumeration .1.3.6.1.4.1.412.2.4.49.1.2 |
administratorPasswordStatisThe current administrator password setting on the system.
This password is required to make hardware configuration changes to the system.ro Enumeration .1.3.6.1.4.1.412.2.4.49.1.3 |
frontPanelResetStatusThe present status of the front panel reset button capability.
If Enabled, the machine can be reset via the front panel reset button. If
Disabled, the reset button, if available, is inoperative.ro Enumeration .1.3.6.1.4.1.412.2.4.49.1.4 |
dmtfSystemHardwareSecurityEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.49.6 |
dmtfSystemHardwareSecurityEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.49.7 |
dmtfPowerSupplyOutputVoltageCapabilitiesTableThis group defines the voltage capabilities of the power
supplies. SEQUENCE OF SdmtfPowerSupplyOutputVoltageCapabilities .1.3.6.1.4.1.412.2.4.50 |
dmtfPowerSupplyOutputVoltageCapabilitiesEntryThis group defines the voltage capabilities of the power
supplies. SdmtfPowerSupplyOutputVoltageCapabilities .1.3.6.1.4.1.412.2.4.50.1 |
dmtfPowerSupplyOutputVoltageCapabilitiesStaterw Enumeration .1.3.6.1.4.1.412.2.4.50.1.0 |
outputVoltageCapabilitiesTableIndexThis is an index into this, the Output Voltage Capabilites
table.ro DmiInteger .1.3.6.1.4.1.412.2.4.50.1.1 |
outputVoltageCapabilityDescriptionAn expanded description of this Output Voltage Capability.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.50.1.4 |
nominalOutputVoltageThe nominal specified voltage for this output, in millivolts.
A value of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.50.1.5 |
outputVoltageLowThe lowest specified voltage for this output, in millivolts.
A value of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.50.1.6 |
outputVoltageHighThe highest specified voltage for this output, in millivolts.
A value of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.50.1.7 |
outputHighFrequencyMaximum specified frequency of this output. 0 for DC. A value
of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.50.1.8 |
outputLowFrequencyMinimum specified frequency of this output. 0 for DC. A value
of 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.50.1.9 |
recommendedMaximumOutputCurrentRecommended maximum output current for this output, in milliamps
0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.50.1.10 |
maximumOutputCurrentRated maximum output current for this output, in milliamps.
0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.50.1.11 |
minimumOutputCurrentRated minimum output current for this output, in milliamps.
0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.50.1.12 |
electricalCurrentProbeIndexIndex into the Electrical Current Probe table identifying
the current probe monitoring this output. 0 indicates no probe provided.ro DmiInteger .1.3.6.1.4.1.412.2.4.50.1.14 |
dmtfSystemPowerControlsTableThis group defines attributes for controlling the main power
supply to the system. SEQUENCE OF SdmtfSystemPowerControls .1.3.6.1.4.1.412.2.4.51 |
dmtfSystemPowerControlsEntryThis group defines attributes for controlling the main power
supply to the system. SdmtfSystemPowerControls .1.3.6.1.4.1.412.2.4.51.1 |
powerControlRequestReading the value of this attribute gives the value of the
last valid power control request that was written into it. Writing a valid
value into it causes the appropriate power control action to be executed
immediately. Writing an invalid or unimplemented value causes no change.rw Enumeration .1.3.6.1.4.1.412.2.4.51.1.1 |
timedPowerOnAvailableDefines whether a timed power-on facility is available.ro Enumeration .1.3.6.1.4.1.412.2.4.51.1.2 |
timeToNextScheduledPowerOnThe number of seconds until the next timed power-on is scheduled
to occur. A value of 0 means that if the system is powered off, no automatic
timed poweron will occur. A value of 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.51.1.3 |
dmtfUPSBatteryTableThe UPS Battery group contains information regarding the
UPS system's battery status. SEQUENCE OF SdmtfUPSBattery .1.3.6.1.4.1.412.2.4.52 |
dmtfUPSBatteryTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.52.0 |
dmtfUPSBatteryStatusChangeThe UPS Battery has changed status according
to the event severity indicated. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.52.0.1 |
dmtfUPSBatteryUtilityPowerLostSystemOnBatteryThe system has lost primary power and is
now running on UPS Battery. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.52.0.2 |
dmtfUPSBatteryUtilityPowerUpSystemOffBatteryPrimary power to the system has been restored.
The UPS battery is no longer in use. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.52.0.3 |
dmtfUPSBatteryEntryThe UPS Battery group contains information regarding the
UPS system's battery status. SdmtfUPSBattery .1.3.6.1.4.1.412.2.4.52.1 |
batteryStatusThe indication of the capacity remaining in the UPS system's
batteries. A value of 'battery normal' indicates that the remaining estimated
minutes of run-time is greater than the UPS's configured 'low battery time'
(typically two minutes). A value of 'battery low' indicates that the remaining
estimated minutes of battery run-time is less than or equal to the UPS's
configured 'low battery time'. A value of 'battery depleted' indicates that
the UPS will be unable to sustain the present load when and ifro Enumeration .1.3.6.1.4.1.412.2.4.52.1.1 |
secondsOnBatteryIf the UPS is on battery power, the elapsed time in seconds
since the UPS last switched to battery power, or the time since the UPS componen
software was last restarted, whichever is less. Zero shall be returned if
the UPS is not on battery power.ro DmiCounter .1.3.6.1.4.1.412.2.4.52.1.2 |
estimatedMinutesRemainingAn estimate in minutes of the time to battery charge depletion
under the present load conditions if the utility power is off and remains
off, or if it were to be lost and remain off.ro DmiInteger .1.3.6.1.4.1.412.2.4.52.1.3 |
estimatedChargeRemainingAn estimate of the time to battery charge depletion under
the present load conditions if the utility power is off and remains off,
or if it were to be lost and remain off. The value represents a percent of
full charge.ro DmiGauge .1.3.6.1.4.1.412.2.4.52.1.4 |
batteryVoltageThe magnitude of the present battery voltage in 0.1 volts
DC.ro DmiGauge .1.3.6.1.4.1.412.2.4.52.1.5 |
batteryCurrentThe present battery current in 0.1 Amps DC.ro DmiGauge .1.3.6.1.4.1.412.2.4.52.1.6 |
temperatureProbeIndexIndex into the Temperature Probe table. This probe indicates
the ambient temperature at or near the UPS battery casing. Zero implies no
probe is present.ro DmiInteger .1.3.6.1.4.1.412.2.4.52.1.7 |
dmtfUPSBatteryEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.52.6 |
dmtfUPSBatteryEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.52.7 |
dmtfVoltageProbeTableThis group defines the attributes for the voltage probes
in this system. SEQUENCE OF SdmtfVoltageProbe .1.3.6.1.4.1.412.2.4.53 |
dmtfVoltageProbeTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.53.0 |
dmtfVoltageProbePowerSupplyStatusChangeA voltage probe on the system has detected an
abnormal change in voltage level from one of
the system's power supplies to the monitored
component. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.53.0.1 |
dmtfVoltageProbeEntryThis group defines the attributes for the voltage probes
in this system. SdmtfVoltageProbe .1.3.6.1.4.1.412.2.4.53.1 |
dmtfVoltageProbeStaterw Enumeration .1.3.6.1.4.1.412.2.4.53.1.0 |
voltageProbeIndexIndex into this voltage probe table.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.1 |
voltageProbeLocationIdentifies the physical location of the voltage probe.ro Enumeration .1.3.6.1.4.1.412.2.4.53.1.2 |
voltageProbeDescriptionAdditional descriptive information about the voltage probe
or probe's location.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.53.1.3 |
voltageStatusDefines the status of the voltage monitored by this voltage
probe.ro Enumeration .1.3.6.1.4.1.412.2.4.53.1.4 |
voltageProbeVoltageLevelThe current voltage level of this voltage probe in millivolts.
0x8000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.5 |
monitoredVoltageNominalLevelThe nominal voltage level of the voltage monitored by this
probe in millivolts. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.6 |
monitoredVoltageNormalMaximumThe normal maximum voltage level of the voltage monitored
by this probe in millivolts. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.7 |
monitoredVoltageNormalMinimumThe normal minimum voltage level of the voltage monitored
by this probe in millivolts. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.8 |
voltageProbeMaximumThe maximum voltage level specified to be readable by this
probe in millivolts. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.9 |
voltageProbeMinimumThe minimum voltage level specified to be readable by this
probe in millivolts. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.53.1.10 |
voltageLevelLowerThresholdNonCriticalThe lower non-critical threshold for the voltage level set
by the user, in millivolts. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.11 |
voltageLevelUpperThresholdNonCriticalThe upper non-critical threshold for the voltage probe, in
millivolts. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.12 |
voltageLevelLowerThresholdCriticalThe lower critical threshold for the voltage probe, in millivolt
. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.13 |
voltageLevelUpperThresholdCriticalThe upper critical threshold for the voltage probe, in millivolt
. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.14 |
voltageLevelLowerThresholdNonRecoverableThe lower non-recoverable threshold for the voltage probe,
in millivolts. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.15 |
voltageLevelUpperThresholdNonRecoverableThe upper non-recoverable threshold for the voltage probe,
in millivolts. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.16 |
voltageProbeResolutionThe resolution for the reading from this voltage probe, in
tenths of millivolts. '0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.17 |
voltageProbeToleranceThe tolerance for the reading from this voltage probe, in
plus/minus millivolts. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.18 |
voltageProbeAccuracyThe accuracy for the reading from this voltage probe, in
plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.53.1.19 |
fRUGroupIndexIndex into the FRU tablero DmiInteger .1.3.6.1.4.1.412.2.4.53.1.20 |
operationalGroupIndexIndex into the Operational State tablero DmiInteger .1.3.6.1.4.1.412.2.4.53.1.21 |
dmtfVoltageProbeEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.53.6 |
dmtfVoltageProbeEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.53.7 |
dmtfTemperatureProbeTableThis group defines the attributes for the temperature probes
in this system. SEQUENCE OF SdmtfTemperatureProbe .1.3.6.1.4.1.412.2.4.54 |
dmtfTemperatureProbeTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.54.0 |
dmtfTemperatureProbeCoolingDeviceStatusChangeA temperature probe on the system has detected
an abnormal change in temperature of the system
or a system component. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.54.0.1 |
dmtfTemperatureProbeEntryThis group defines the attributes for the temperature probes
in this system. SdmtfTemperatureProbe .1.3.6.1.4.1.412.2.4.54.1 |
dmtfTemperatureProbeStaterw Enumeration .1.3.6.1.4.1.412.2.4.54.1.0 |
temperatureProbeTableIndexIndex into this temperature probe table.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.1 |
temperatureProbeLocationIdentifies the physical location of the temperature probe.ro Enumeration .1.3.6.1.4.1.412.2.4.54.1.2 |
temperatureProbeDescriptionAdditional descriptive information about the temperature
probe or probe's location.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.54.1.3 |
temperatureStatusDefines the status of the temperature monitored by this temperat
re probe.ro Enumeration .1.3.6.1.4.1.412.2.4.54.1.4 |
temperatureProbeTemperatureReadingThe present temperature reading of this temperature probe
in 1/10th degrees C. 0x8000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.5 |
monitoredTemperatureNominalReadingThe nominal temperature reading of the temperature monitored
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.6 |
monitoredTemperatureNormalMaximumThe normal maximum temperature reading of the temperature
monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.7 |
monitoredTemperatureNormalMinimumThe normal minimum temperature reading of the temperature
monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.8 |
temperatureProbeMaximumThe maximum temperature reading specified to be readable
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.9 |
temperatureProbeMinimumThe minimum temperature reading specified to be readable
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.54.1.10 |
temperatureReadingLowerThresholdNonCriticalThe lower non-critical threshold for the temperature reading
set by the user, in 1/10th degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.11 |
temperatureReadingUpperThresholdNonCriticalThe upper non-critical threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.12 |
temperatureReadingLowerThresholdCriticalThe lower critical threshold for the temperature probe, in
1/10 degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.13 |
temperatureReadingUpperThresholdCriticalThe upper critical threshold for the temperature probe, in
/10th degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.14 |
temperatureReadingLowerThresholdNonRecoverableThe lower non-recoverable threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.15 |
temperatureReadingUpperThresholdNonRecoverableThe upper non-recoverable threshold for the temperature probe,
in 1/10th degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.16 |
temperatureProbeResolutionThe resolution for the reading from this temperature probe,
in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.17 |
temperatureProbeToleranceThe tolerance for the reading from this temperature probe,
in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.18 |
temperatureProbeAccuracyThe accuracy for the reading from this temperature probe,
in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or'unsupport
d'.rw DmiInteger .1.3.6.1.4.1.412.2.4.54.1.19 |
dmtfTemperatureProbeEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.54.6 |
dmtfTemperatureProbeEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.54.7 |
dmtfElectricalCurrentProbeTableThis group defines the attributes for the current probes
in this system. SEQUENCE OF SdmtfElectricalCurrentProbe .1.3.6.1.4.1.412.2.4.55 |
dmtfElectricalCurrentProbeTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.55.0 |
dmtfElectricalCurrentProbePowerSupplyStatusChangeAn electrical current probe on the system has
detected an abnormal change in electrical current
from a power supply to the monitored component of
the system. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.55.0.1 |
dmtfElectricalCurrentProbeCoolingDeviceStatusChangeA cooling device (e.g., Fan) on the system has changed
status due to loss of (or regained) electrical power. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.55.0.2 |
dmtfElectricalCurrentProbeEntryThis group defines the attributes for the current probes
in this system. SdmtfElectricalCurrentProbe .1.3.6.1.4.1.412.2.4.55.1 |
dmtfElectricalCurrentProbeStaterw Enumeration .1.3.6.1.4.1.412.2.4.55.1.0 |
electricalCurrentProbeTableIndexIndex into this electrical current probe table.ro DmiInteger .1.3.6.1.4.1.412.2.4.55.1.1 |
electricalCurrentProbeLocationIdentifies the physical location of the electrical current
probe.ro Enumeration .1.3.6.1.4.1.412.2.4.55.1.2 |
electricalCurrentProbeDescriptionAdditional descriptive information about the electrical current
probe or probe's location.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.55.1.3 |
electricalCurrentStatusDefines the status of the electrical current monitored by
this electrical current probe.ro Enumeration .1.3.6.1.4.1.412.2.4.55.1.4 |
electricalCurrentProbeReadingThe present electrical current reading of this probe in milliamp
. 0x8000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.55.1.5 |
monitoredElectricalCurrentNominalReadingThe nominal electrical current reading of the current monitored
by this probe in milliamps. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.55.1.6 |
monitoredElectricalCurrentNormalMaximumThe normal maximum electrical current reading of the current
monitored by this probe in milliamps. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.55.1.7 |
monitoredElectricalCurrentNormalMinimumThe normal minimum electrical current reading of the current
monitored by this probe in milliamps. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.55.1.8 |
electricalCurrentProbeMaximumThe maximum electrical current reading specified to be readable
by this probe in milliamps. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.55.1.9 |
electricalCurrentProbeMinimumThe minimum electrical current reading specified to be readable
by this probe in milliamps. 0x80000000 denotes 'unknown'.ro DmiInteger .1.3.6.1.4.1.412.2.4.55.1.10 |
electricalCurrentReadingLowerThresholdNonCriticalThe lower non-critical threshold for the electrical current
reading set by the user, in milliamps. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.55.1.11 |
electricalCurrentReadingUpperThresholdNonCriticalThe upper non-critical threshold for the electrical current
reading, in milliamps. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.55.1.12 |
electricalCurrentReadingLowerThresholdCriticalThe lower critical threshold for the electrical current probe,
in milliamps. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.55.1.13 |
currentReadingUpperThresholdCriticalThe upper critical threshold for the electrical current probe,
in milliamps. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.55.1.14 |
electricalCurrentReadingLowerThresholdNonRecoverabThe lower non-recoverable threshold for the electrical current
probe, in milliamps. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.55.1.15 |
electricalCurrentReadingUpperThresholdNonRecoverabThe upper non-recoverable threshold for the electrical current
probe, in milliamps. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.55.1.16 |
electricalCurrentProbeResolutionThe resolution for the reading from this electrical current
probe, in tenths of milliamps. '0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.55.1.17 |
electricalCurrentProbeToleranceThe tolerance for the reading from this electrical current
probe, in plus/minus milliamps. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.55.1.18 |
electricalCurrentProbeAccuracyThe accuracy for the reading from this electrical current
probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.55.1.19 |
dmtfElectricalCurrentProbeEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.55.6 |
dmtfElectricalCurrentProbeEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.55.7 |
dmtfDiagnosticFunctionGroupTableThis group defines the diagnostic functions that are provided
by this component for analyzing potential failures within the component.
A diagnostic function could be an actual test run against the component,
the results of a self-test of the component, an analysis of failure information
captured during a failure of the component, or an analysis of the current
state of the component. SEQUENCE OF SdmtfDiagnosticFunctionGroup .1.3.6.1.4.1.412.2.4.56 |
dmtfDiagnosticFunctionGroupEntryThis group defines the diagnostic functions that are provided
by this component for analyzing potential failures within the component.
A diagnostic function could be an actual test run against the component,
the results of a self-test of the component, an analysis of failure information
captured during a failure of the component, or an analysis of the current
state of the component. SdmtfDiagnosticFunctionGroup .1.3.6.1.4.1.412.2.4.56.1 |
dmtfDiagnosticFunctionGroupStaterw Enumeration .1.3.6.1.4.1.412.2.4.56.1.0 |
diagnosticFunctionTableIndexA unique identifier for this specific diagnostic function.ro DmiInteger .1.3.6.1.4.1.412.2.4.56.1.1 |
diagnosticFunctionNameA specific descriptive name of the diagnostic function, includin
version information, if relevant.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.56.1.2 |
diagnosticFunctionDescriptionA description of what this diagnostic function does.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.56.1.3 |
exclusiveAccessRequiredIndicates whether this diagnostic function requires exclusive
access to the device or component, implying that the user or management applicat
on must take some action within the operating system to ensure that the device
or component cannot be used by any other function.ro Enumeration .1.3.6.1.4.1.412.2.4.56.1.4 |
prerequisiteConditionsIndicates what conditions must be met before this diagnostic
function can be run.ro Enumeration .1.3.6.1.4.1.412.2.4.56.1.5 |
prerequisiteDiagnosticFunctionIf non-0, this specifies the ID of another diagnostic function
that must be run immediately prior to this one.ro DmiInteger .1.3.6.1.4.1.412.2.4.56.1.6 |
dmtfDiagnosticRequestGroupTableThis group defines the attributes which a management application
uses to request an actual diagnostic analysis. SEQUENCE OF SdmtfDiagnosticRequestGroup .1.3.6.1.4.1.412.2.4.57 |
dmtfDiagnosticRequestGroupEntryThis group defines the attributes which a management application
uses to request an actual diagnostic analysis. SdmtfDiagnosticRequestGroup .1.3.6.1.4.1.412.2.4.57.1 |
diagnosticFunctionReserveKeyIndicates whether the interface to this component's diagnostic
functions is reserved. A zero value returned on a get indicates that a reserve
is already in effect. A non-zero value indicates that no reserve was in
effect, and the returned value may be used as a reserve key.rw DmiInteger .1.3.6.1.4.1.412.2.4.57.1.1 |
diagnosticFunctionRequestThe ID of the specific diagnostic function which is being
requested. If the interface is reserved, a set request to this attribute
should also set the Diagnostic Function Reserve Key with the reserve key
value.rw DmiInteger .1.3.6.1.4.1.412.2.4.57.1.2 |
dmtfDiagnosticResultsGroupTableThis group defines the attributes for interpreting diagnostic
function result codes. SEQUENCE OF SdmtfDiagnosticResultsGroup .1.3.6.1.4.1.412.2.4.58 |
dmtfDiagnosticResultsGroupEntryThis group defines the attributes for interpreting diagnostic
function result codes. SdmtfDiagnosticResultsGroup .1.3.6.1.4.1.412.2.4.58.1 |
dmtfDiagnosticResultsGroupStaterw Enumeration .1.3.6.1.4.1.412.2.4.58.1.0 |
diagnosticFunctionIDThe unique ID for a specific diagnostic function.ro DmiInteger .1.3.6.1.4.1.412.2.4.58.1.1 |
diagnosticFunctionResultAn integer-based result code of the diagnostic function.ro DmiInteger .1.3.6.1.4.1.412.2.4.58.1.2 |
diagnosticFunctionResultDescriptionA description of what this result code for this diagnostic
function means, including suggested corrective actions, where possible.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.58.1.3 |
faultIsolatedToThisComponentAn indicator of whether the fault is strictly isolated within
the bounds of this component. A False value indicates that the fault might
be caused by a failing parent component; for example, a disk test may fail
because of a faulty disk controller.ro Enumeration .1.3.6.1.4.1.412.2.4.58.1.4 |
dmtfDiagnosticResultsFRUCallTableThis group defines the possible FRUs (Field Replaceable Units)
implied by the diagnostic function results. This table may hold multiple
FRU entries for a given diagnostic ID and result. SEQUENCE OF SdmtfDiagnosticResultsFRUCall .1.3.6.1.4.1.412.2.4.59 |
dmtfDiagnosticResultsFRUCallEntryThis group defines the possible FRUs (Field Replaceable Units)
implied by the diagnostic function results. This table may hold multiple
FRU entries for a given diagnostic ID and result. SdmtfDiagnosticResultsFRUCall .1.3.6.1.4.1.412.2.4.59.1 |
dmtfDiagnosticResultsFRUCallStaterw Enumeration .1.3.6.1.4.1.412.2.4.59.1.0 |
fRUIndexPointerThe index in the FRU table of the implied failing FRU.ro DmiInteger .1.3.6.1.4.1.412.2.4.59.1.3 |
fRUProbabilityThe probability, in percent, that this is the failing FRU.
A value of 0x80000000 means the probability is unknown; otherwise, this should
be a percentage number from 1 to 100.ro DmiInteger .1.3.6.1.4.1.412.2.4.59.1.4 |
dmtfOutOfBandRemoteAccessTableThis defines the attributes and policy settings of a special
hardware facility called Out-of-Band Remote Access, which may be used to
gain remote accessto a hardware system when the operating system is not availabl
due to power down status, hardware failures, or boot failures. SEQUENCE OF SdmtfOutOfBandRemoteAccess .1.3.6.1.4.1.412.2.4.60 |
dmtfOutOfBandRemoteAccessEntryThis defines the attributes and policy settings of a special
hardware facility called Out-of-Band Remote Access, which may be used to
gain remote accessto a hardware system when the operating system is not availabl
due to power down status, hardware failures, or boot failures. SdmtfOutOfBandRemoteAccess .1.3.6.1.4.1.412.2.4.60.1 |
outOfBandFunctionManufacturerNameThis string attribute provides the name of the manufacturer
of the out-of-band access facility in the system. This may be the name of
the system manufacturer or the name of the add-in that carries the out-of-band
function.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.60.1.1 |
outOfBandFunctionDescriptionStringThis is a user-settable string that contains a description
of the out-of-band remote access facility in the system.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.60.1.2 |
outboundOutOfBandConnectionEnabledDefines whether the Out-of-Band Remote Access facility is
allowed to initiate outbound connections to contact an alert management facility
when critical conditions occur.rw Enumeration .1.3.6.1.4.1.412.2.4.60.1.3 |
inboundOutOfBandConnectionEnabledDefines whether the Out-of-Band Remote Access facility is
allowed to receive incoming connections for the purpose of remote operations
or problem management.rw Enumeration .1.3.6.1.4.1.412.2.4.60.1.4 |
dmtfCachePerformanceTableThis is a table of entries for cache performance for all
components in the system that implement a cache. SEQUENCE OF SdmtfCachePerformanceTable .1.3.6.1.4.1.412.2.4.61 |
dmtfCachePerformanceEntryThis is a table of entries for cache performance for all
components in the system that implement a cache. SdmtfCachePerformanceTable .1.3.6.1.4.1.412.2.4.61.1 |
dmtfCachePerformanceTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.61.1.0 |
cacheIndexIndex into the System Cache tablero DmiInteger .1.3.6.1.4.1.412.2.4.61.1.1 |
millisecondCounter32 bit counter that gets incremented every millisecondro DmiCounter .1.3.6.1.4.1.412.2.4.61.1.2 |
cacheAccessCount64 bit counter that counts the number of times the cache
has been accessed. A value of 0x8000000000000000 denotes 'unknown'.ro DmiCounter64 .1.3.6.1.4.1.412.2.4.61.1.3 |
cacheHitCount64 bit counter that counts the number of times there was
a cache hit. i.e. memory being accessed was in the Cache. A value of 0x800000000
000000 denotes 'unknown'.ro DmiCounter64 .1.3.6.1.4.1.412.2.4.61.1.4 |
partialHitCountCounts the number of times there was a partial cache hit.
A value of 0x8000000000000000 denotes 'unknown' or 'unsupported'.ro DmiCounter64 .1.3.6.1.4.1.412.2.4.61.1.5 |
hitDataSizeOn a partial hit the number of bytes that were available
in cache. A value of 0x8000000000000000 denotes 'unknown' or 'unsupported'.ro Dmi-Integer64 .1.3.6.1.4.1.412.2.4.61.1.6 |
validUsageThe amount of cache currently holding valid data, in kilobytes.
A value of 0x80000000 denotes 'unknown' or 'unsupported'.ro DmiInteger .1.3.6.1.4.1.412.2.4.61.1.7 |
dirtyUsageThe amount of cache data, in kilobytes, not yet written to
media. A value of 0x80000000 denotes 'unknown' or 'unsupported'.ro DmiInteger .1.3.6.1.4.1.412.2.4.61.1.8 |
timeOfLastDetectedFaultThe number of seconds that have passed between power on the
last detected cache fault or failure.ro DmiInteger .1.3.6.1.4.1.412.2.4.61.1.9 |
lastFaultFailureDetectedThe vendor-unique fault code associated with the most recent
fault or failure detected with this cache.ro DmiInteger .1.3.6.1.4.1.412.2.4.61.1.10 |
dmtfBusUtilizationTableThis group defines Bus Utilization. SEQUENCE OF SdmtfBusUtilizationTable .1.3.6.1.4.1.412.2.4.62 |
dmtfBusUtilizationEntryThis group defines Bus Utilization. SdmtfBusUtilizationTable .1.3.6.1.4.1.412.2.4.62.1 |
dmtfBusUtilizationTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.62.1.0 |
busIndexIndex that uniquely identifies a bus in the system or component
for which utilization is being measured. This is an index into the Bus Global
Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.62.1.1 |
busUtilizationSampleIntervalLength of time in millisecs over which bus utilization is
measured. A value of 0x80000000 denotes 'unknown'.rw DmiInteger .1.3.6.1.4.1.412.2.4.62.1.3 |
percentBusUtilizationPercent of the time the specified bus was busy transfering
data to or from the slot specified in slot index. A value of 0x80000000 means
that the percent bus utilization is unknown.ro DmiInteger .1.3.6.1.4.1.412.2.4.62.1.4 |
averageBusThroughputRateAverage mega bytes transferred by the bus per second during
the sampling interval. A value of 0x80000000 means that the average bus throughp
t rate is unknown.ro DmiInteger .1.3.6.1.4.1.412.2.4.62.1.5 |
dmtfPhysicalContainerGlobalTableThis group of attributes describes the fields in a row ofthe
Physical Container Global Table. This table lists all of the containers (e.g.
chassis, sub-chassis, etc.) included within the component whose structure
is being described SEQUENCE OF SdmtfPhysicalContainerGlobalTable .1.3.6.1.4.1.412.2.4.63 |
dmtfPhysicalContainerGlobalTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.63.0 |
dmtfPhysicalContainerSecuritySettingsChangeThe security settings for the system chassis or
physical container in the system have been modified. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.63.0.1 |
dmtfPhysicalContainerPowerSupplyStatusChangeThe power supply for an associated system
chassis or physical container has changed status. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.63.0.2 |
dmtfPhysicalContainerCoolingDeviceStatusChangeThe cooling device for an associated system
chassis or physical container has changed status. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.63.0.3 |
dmtfPhysicalContainerPhysicalDeviceStatusChangephysicalDeviceStatusChange NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.63.0.4 |
dmtfPhysicalContainerLogicalDeviceStatusChangelogicalDeviceStatusChange NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.63.0.5 |
dmtfPhysicalContainerSecurityBreachThe system chassis has been opened has
been opened without poper authorization. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.63.0.6 |
dmtfPhysicalContainerConfigurationErrorA chassis or other physical container on the
system is not properly configured. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.63.0.7 |
dmtfPhysicalContainerGlobalEntryThis group of attributes describes the fields in a row ofthe
Physical Container Global Table. This table lists all of the containers (e.g.
chassis, sub-chassis, etc.) included within the component whose structure
is being described SdmtfPhysicalContainerGlobalTable .1.3.6.1.4.1.412.2.4.63.1 |
dmtfPhysicalContainerGlobalTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.63.1.0 |
containerOrChassisTypeThe type of container or chassis.ro Enumeration .1.3.6.1.4.1.412.2.4.63.1.1 |
containerIndexA unique index for the Physical Container in Physical Container
Global Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.63.1.9 |
containerNameThis is any 64-octet long name that the user or system administr
tor wishes to give this specific physical container.rw DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.63.1.10 |
containerLocationThis attribute is a string name for the location of the containe
. This attribute is Read-Write and may be set to any appropriate value by
the user. The string may be 128 octets long.rw DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.63.1.11 |
containerSecurityStatusThis attribute describes whether the Container is physically
secure or not. This includes the state of the door lock, or the boot devices
or the keyboard or mouse.ro Enumeration .1.3.6.1.4.1.412.2.4.63.1.12 |
dmtfPhysicalContainerGlobalEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.63.6 |
dmtfPhysicalContainerGlobalEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.63.7 |
dmtfBusGlobalTableThis global table has one entry for each of the Buses in
this Component. The unique ID provided to each bus is the index into this
table. SEQUENCE OF SdmtfBusGlobalTable .1.3.6.1.4.1.412.2.4.64 |
dmtfBusGlobalEntryThis global table has one entry for each of the Buses in
this Component. The unique ID provided to each bus is the index into this
table. SdmtfBusGlobalTable .1.3.6.1.4.1.412.2.4.64.1 |
dmtfBusGlobalTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.64.1.0 |
busIDUnique index provided to each Bus in this Component and used
as a key into the Bus Global Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.64.1.1 |
dmtfPhysicalExpansionSiteTableThis global table describes all of the expansion sites in
this expandable component in the system. The unique index of each expansion
site is the key into this table. Card/Bus slots, disk bays, hot-plug power
supply bays, etc., are all examples of expansion sites. SEQUENCE OF SdmtfPhysicalExpansionSiteTable .1.3.6.1.4.1.412.2.4.65 |
dmtfPhysicalExpansionSiteEntryThis global table describes all of the expansion sites in
this expandable component in the system. The unique index of each expansion
site is the key into this table. Card/Bus slots, disk bays, hot-plug power
supply bays, etc., are all examples of expansion sites. SdmtfPhysicalExpansionSiteTable .1.3.6.1.4.1.412.2.4.65.1 |
dmtfPhysicalExpansionSiteTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.65.1.0 |
expansionSiteIndexThe unique integer index into Physical Expansion Sites table.ro DmiInteger .1.3.6.1.4.1.412.2.4.65.1.1 |
expansionSiteTypeThis attribute describes the type of expansion site that
is being defined by this entry in the Physical Expansion Sites Table.ro Enumeration .1.3.6.1.4.1.412.2.4.65.1.2 |
virtualExpansionSiteThis attribute indicates whether this is a 'virtual' expansion
site or not. A virtual expansion site is one that is permanently occupied
because of the level of integration of an expandable component. An example
of a virtual expansion site is an I/O bus load taken up by a LAN controller
that is integrated onto a motherboard.ro Enumeration .1.3.6.1.4.1.412.2.4.65.1.3 |
expansionSiteNameName chosen by the vendor of this component to name this
particular expansion site within this component, e.g. 'Slot 6', 'DriveBay
1'.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.65.1.4 |
expansionSiteDescriptionThis is a vendor-settable string that describes the expandable
site in whatever way is desired.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.65.1.5 |
expansionSiteCurrentlyOccupiedA boolean whose value indicates whether this Expansion Site
is currently occupied or not.ro Enumeration .1.3.6.1.4.1.412.2.4.65.1.6 |
expansionSiteInsertionPropertiesThis attribute indicates the insertion properties of this
expansion site (Hot, Warm, Cold) which describes if the site must be powered
OFF before a connection may be made. An example of a hot insertion expansion
site would be a hot-plug power supply bay while a bus slot like PCI is a
cold insertion expansion site. Warm insertion allows power to be ON but
no activity present.ro Enumeration .1.3.6.1.4.1.412.2.4.65.1.7 |
expansionSitePropertiesTableReferenceReference to Expansion Site Properties Tablero DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.65.1.8 |
dmtfPowerUnitGlobalTableThis global table describes all of the Power Units in this
system component. The unique index of each Power Unit is the key into this
table. A Power Unit is composed of potentially more than one Power Supply
in a redundant configuration. Individual power supplies are described in
the 'Power Supply' standard group. In that group, each individual power supply
entry will point to a Power Unit in this table by using the index of the
row in this table that describes the Power Unit. If a Power Unit is redunda SEQUENCE OF SdmtfPowerUnitGlobalTable .1.3.6.1.4.1.412.2.4.66 |
dmtfPowerUnitGlobalEntryThis global table describes all of the Power Units in this
system component. The unique index of each Power Unit is the key into this
table. A Power Unit is composed of potentially more than one Power Supply
in a redundant configuration. Individual power supplies are described in
the 'Power Supply' standard group. In that group, each individual power supply
entry will point to a Power Unit in this table by using the index of the
row in this table that describes the Power Unit. If a Power Unit is redunda SdmtfPowerUnitGlobalTable .1.3.6.1.4.1.412.2.4.66.1 |
dmtfPowerUnitGlobalTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.66.1.0 |
powerUnitIndexThe unique index given to each Power Unit being described
by this table. This unique index is the key into this table.ro DmiInteger .1.3.6.1.4.1.412.2.4.66.1.1 |
powerUnitRedundancyStatusGives the redundancy status of the Power Unit. 'Fully Redundant
means that all of the configured redundancy is still available; 'Degraded
Redundancy' means that some failures have been experienced but some reduced
amount of redundancy is still available; 'Redundancy Lost' means that a sufficie
t number of failures have been experienced that no redundancy is available
and the next failure experienced within the Power Unit will cause overall
Power Unit failure.ro Enumeration .1.3.6.1.4.1.412.2.4.66.1.2 |
dmtfCoolingUnitGlobalTableThis global table describes all of the Cooling Units in this
system component. The unique index of each Cooling Unit is a key into this
table. A Cooling Unit is composed of potentially more than one Cooling Device
in a redundant configuration. Cooling devices are described by the 'Cooling
Device' standard group. Each cooling device described by a row in the Cooling
Device standard group will point to a corresponding Cooling Unit in this
table by using the row index of the row that describes the Coolin SEQUENCE OF SdmtfCoolingUnitGlobalTable .1.3.6.1.4.1.412.2.4.67 |
dmtfCoolingUnitGlobalEntryThis global table describes all of the Cooling Units in this
system component. The unique index of each Cooling Unit is a key into this
table. A Cooling Unit is composed of potentially more than one Cooling Device
in a redundant configuration. Cooling devices are described by the 'Cooling
Device' standard group. Each cooling device described by a row in the Cooling
Device standard group will point to a corresponding Cooling Unit in this
table by using the row index of the row that describes the Coolin SdmtfCoolingUnitGlobalTable .1.3.6.1.4.1.412.2.4.67.1 |
dmtfCoolingUnitGlobalTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.67.1.0 |
coolingUnitIndexThe unique index given to each Cooling Unit being described
by this table. This unique index is the key into this table.ro DmiInteger .1.3.6.1.4.1.412.2.4.67.1.1 |
coolingUnitStatusGives the redundancy status of the Cooling Unit. 'Fully Redundan
' means that all of the configured redundancy is still available; 'Degraded
Redundancy' means that some failures have been experienced but some reduced
amount of redundancy is still available; 'Redundancy Lost' means that a sufficie
t number of failures have been experienced that no redundancy is available
and the next failure experienced within the Cooling Unit will cause overall
Cooling Unit failure.ro Enumeration .1.3.6.1.4.1.412.2.4.67.1.2 |
dmtfStructureDependencyTableThis group describes a table whose entries identify the structur
l dependencies of elements on other elements in the system. The attributes
in this group form a row of the table and the row has the following structure:<d
pendency-index> <supporting-element-pointer> <dependency-type> <dependent-elemen
-pointer>. The <dependency-index> is the index of the row in the table.
The <dependency-element-pointer> can point either to a element in the current
Component or to an external Component. The <supportin SEQUENCE OF SdmtfStructureDependencyTable .1.3.6.1.4.1.412.2.4.68 |
dmtfStructureDependencyTraps OBJECT IDENTIFIER .1.3.6.1.4.1.412.2.4.68.0 |
dmtfStructureDependencyPowerSupplyStatusChangeA power supply in the system has changed status. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.68.0.1 |
dmtfStructureDependencyCoolingDeviceStatusChangeA cooling device (e.g., fan) in the system
has changed status. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.68.0.2 |
dmtfStructureDependencyPhysicalDeviceStatusChangeA physical device in the system has
changed status. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.68.0.3 |
dmtfStructureDependencyLogicalDeviceStatusChangeA logical device in the system has
changed status. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.68.0.4 |
dmtfStructureDependencySystemUpAn element of the system is up and running NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.68.0.5 |
dmtfStructureDependencyBatteryStatusChangeA battery powering the system has changed status. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.68.0.6 |
dmtfStructureDependencyContainerSecurityBreachThe system chassis has been opened has
been opened without poper authorization. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.68.0.7 |
dmtfStructureDependencyInitializationFailureAn element of the system failed to initialize
properly during system startup. NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.68.0.8 |
dmtfStructureDependencyConfigurationErrorAn element of the system is not properly configured NOTIFICATION-TYPE .1.3.6.1.4.1.412.2.4.68.0.9 |
dmtfStructureDependencyEntryThis group describes a table whose entries identify the structur
l dependencies of elements on other elements in the system. The attributes
in this group form a row of the table and the row has the following structure:<d
pendency-index> <supporting-element-pointer> <dependency-type> <dependent-elemen
-pointer>. The <dependency-index> is the index of the row in the table.
The <dependency-element-pointer> can point either to a element in the current
Component or to an external Component. The <supportin SdmtfStructureDependencyTable .1.3.6.1.4.1.412.2.4.68.1 |
dmtfStructureDependencyTableStaterw Enumeration .1.3.6.1.4.1.412.2.4.68.1.0 |
dependencyIndexThis is a unique index into the Structure Dependency Table.ro DmiInteger .1.3.6.1.4.1.412.2.4.68.1.1 |
supportingElementGroupIDThis attribute holds the Group ID of the structure table
(e.g. Physical Container Global Table, etc.) or other table group within
the current expandable component that describes the supporting element. A
supporting element Component ID is not required because the supporting element
is expected to reside in the current Component that is implementing this
attribute.ro DmiInteger .1.3.6.1.4.1.412.2.4.68.1.2 |
supportingElementRowKeyThis attribute holds the Row Key to the structure table or
other table group within the current expandable component that describes
the supporting element. The Row Key is a KeyList composed of Integers (or
Enums) ONLY. It is currently represented as a string whose content is a
comma-separated list of Integers in ASCII form (i.e. the individual keys),
without any intervening spaces. If the supporting element is not described
by a table group then this attribute must be set to a null string.ro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.68.1.3 |
dependencyTypeThis attribute describes the type of dependency represented
by this entry in the Structure Dependency Table, e.g. 'contains', or'provides
power to', etc.ro Enumeration .1.3.6.1.4.1.412.2.4.68.1.4 |
dependentElementComponentIDThis is the Component ID of the dependent element in the
dependency relationship which is of the form'<supporting-element> <dependency-re
ation> <dependent-element>'. If this attribute has a zero value then the
current component is being referenced. If it is non-zero then an external
component is being pointed to.ro DmiInteger .1.3.6.1.4.1.412.2.4.68.1.5 |
dependentElementGroupIDThis attribute contains the Group ID of the attribute group
that describes the dependent element within the component identified by the
attribute Dependent Element Component ID.ro DmiInteger .1.3.6.1.4.1.412.2.4.68.1.6 |
dependentElementRowKeyThis attribute holds the RowKey selecting the particular
row in the(table) group uniquely identified by the contents of the attribute's
Dependent Element Group ID and Dependent Element Component ID. The Row Key
is a KeyList composed of Integers (or Enums) ONLY. It is currently represented
as a string whose content is a comma-separated list of Integers in ASCII
form (i.e. the individual keys), without any intervening spaces. If the dependen
element is not described by a table group then this attribute mro DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.68.1.7 |
dmtfStructureDependencyEvSysThe major functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.68.6 |
dmtfStructureDependencyEvSubThe minor functional aspect of the product causing the fault. Enumeration .1.3.6.1.4.1.412.2.4.68.7 |
dmtfBusCardLocationTableThis group specifies a logical location on an I/O expansion
bus. This group is required. SEQUENCE OF SdmtfBusCardLocation .1.3.6.1.4.1.412.2.4.69 |
dmtfBusCardLocationEntryThis group specifies a logical location on an I/O expansion
bus. This group is required. SdmtfBusCardLocation .1.3.6.1.4.1.412.2.4.69.1 |
eISAIOAddressEISA I/O address which identifies a specific EISA slot.ro DmiInteger .1.3.6.1.4.1.412.2.4.69.1.8 |
busNumberNumber of the PCI or MCA bus containing a bus card.ro DmiInteger .1.3.6.1.4.1.412.2.4.69.1.9 |
busLocationConfiguration address specifying the location of a bus card
on a specific PCI or MCA bus.ro DmiInteger .1.3.6.1.4.1.412.2.4.69.1.10 |
iSASlotSlot number of an ISA card inserted into an EISA or ISA bus.
This indicates a physical slot number.ro DmiInteger .1.3.6.1.4.1.412.2.4.69.1.11 |
dmtfSystemContactInformationTableThis tabular group contains records, each of which contains
contact information for one of the administrators of this machine SEQUENCE OF SdmtfSystemContactInformation .1.3.6.1.4.1.412.2.4.70 |
dmtfSystemContactInformationEntryThis tabular group contains records, each of which contains
contact information for one of the administrators of this machine SdmtfSystemContactInformation .1.3.6.1.4.1.412.2.4.70.1 |
dmtfSystemContactInformationStaterw Enumeration .1.3.6.1.4.1.412.2.4.70.1.0 |
contactIndexIndex into table of administrator contacts for this systemro DmiInteger .1.3.6.1.4.1.412.2.4.70.1.1 |
contactNameName of administrator contact for this machinerw DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.70.1.2 |
contactTypeThe type of mechanism by which this administrator can be
contacted.rw Enumeration .1.3.6.1.4.1.412.2.4.70.1.3 |
contactInformationAddressing or other information that will be used to establish
contact e.g. if Contact Type is Telephone then Contact Information would
be the telephone number.rw DmiString (DMTF-DMI-MIB) .1.3.6.1.4.1.412.2.4.70.1.4 |
dmtfSystemMemorySettingsTableThis group defines the current memory settings for system
memory and any add-on memory installed in the operating system. SEQUENCE OF SdmtfSystemMemorySettings .1.3.6.1.4.1.412.2.4.71 |
dmtfSystemMemorySettingsEntryThis group defines the current memory settings for system
memory and any add-on memory installed in the operating system. SdmtfSystemMemorySettings .1.3.6.1.4.1.412.2.4.71.1 |
totalPhysicalMemoryThe total size of physical system memory in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.71.1.1 |
freePhysicalMemoryThe amount of physical memory free in kilobytes.ro DmiInteger .1.3.6.1.4.1.412.2.4.71.1.2 |
totalSizeOfPagingFilesThe total number of kilobytes that can be stored in the system
paging files.ro DmiInteger .1.3.6.1.4.1.412.2.4.71.1.3 |
totalFreeSpaceInPagingFilesThe number of kilobytes available in the system paging files.ro DmiInteger .1.3.6.1.4.1.412.2.4.71.1.4 |
totalVirtualMemoryTotal kilobytes in the virtual address space of the operating
system.ro DmiInteger .1.3.6.1.4.1.412.2.4.71.1.5 |
freeVirtualMemoryFree kilobytes in the virtual address space of the operating
system.ro DmiInteger .1.3.6.1.4.1.412.2.4.71.1.6 |
dmtfDynOids OBJECT IDENTIFIER .1.3.6.1.4.1.412.3 |