DLINKSW-TIME-MIB
This MIB module defines objects for Time and Simple Network Time Protocol (SNTP).
Main OID:
dlinkSwTimeMIB.1.3.6.1.4.1.171.14.10
37
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
dlinkSwTimeMIBThis MIB module defines objects for Time and Simple Network Time Protocol (SNTP). MODULE-IDENTITY .1.3.6.1.4.1.171.14.10 |
dTimeMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.10.0 |
dTimeMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.10.1 |
dTimeGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.10.1.1 |
dTimeSntpEnabledThis object indicates the state of SNTP function. Setting this object to 'true' will enable SNTP function.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.10.1.1.1 |
dTimeSntpBcastClientEnabledThis object is used to enable/disable the broadcast client mode. Setting this object to 'true' indicates that the agent accepts broadcast SNTP traffic from servers.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.10.1.1.2 |
dTimeSntpPollIntervalThis object indicates the interval for the SNTP client to synchronize its clock with server.rw Unsigned32 .1.3.6.1.4.1.171.14.10.1.1.3 |
dTimeSntpSourceIfIndexThis object indicates the ifIndex of the interface whose IP address will be used as the source address for sending the SNTP packet. A special value of 0 indicates the source interface is not specified and the IP address of the closest interface will be used.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.171.14.10.1.1.4 |
dTimeClock OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.10.1.2 |
dTimeManagedClockUse the object to manually set the system clock.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.171.14.10.1.2.1 |
dTimeCurrentTimeSourceThe object indicates the clock source.ro Enumeration .1.3.6.1.4.1.171.14.10.1.2.2 |
dTimeCurrentTimeThis object indicates the current system time. System time can be disciplined or adjusted by RTC, SNTP, or configured by user.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.171.14.10.1.2.3 |
dTimeSummerTime OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.10.1.2.5 |
dTimeSummerTimeAutoSwitchModeThis object indicates the mode of the system to automatically switch to Summer Time (Daylight Saving Time). disable(1) - The Daylight Saving Time feature is disabled. recurring(2) - The Daylight Saving Time feature is enabled. The Summer Time should start and end on the specified week day of the specified month. date(3) - The Daylight Saving Time feature is enabled. The Summer Time should start and end on the specified date of the specified month.rw Enumeration .1.3.6.1.4.1.171.14.10.1.2.5.1 |
dTimeSummerTimeStartThis object indicates when the Summer Time starts. This value is always interpreted within the context of a dTimeSummerTimeAutoSwitchMode value.rw DlinkTimeSummerTimeValue .1.3.6.1.4.1.171.14.10.1.2.5.2 |
dTimeSummerTimeEndThis object indicates when the Summer Time ends. This value is always interpreted within the context of a dTimeSummerTimeAutoSwitchMode value.rw DlinkTimeSummerTimeValue .1.3.6.1.4.1.171.14.10.1.2.5.3 |
dTimeSummerTimeOffsetThe value of this object indicates number of minutes to add or to subtract during Summer Time. This object is not meaningful when dTimeSummerTimeAutoSwitchMode object is 'disable'.rw INTEGER (30|60|90|120) UNITS "Minutes" .1.3.6.1.4.1.171.14.10.1.2.5.4 |
dTimeServer OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.10.1.3 |
dTimeSntpServerTableNumThis object indicates the number of entries present in the dTimeSntpServerTable.ro Unsigned32 .1.3.6.1.4.1.171.14.10.1.3.1 |
dTimeSntpServerTableThis table consists of a list of information for SNTP Time servers, which allow the software clock to be synchronized. SEQUENCE OF DTimeSntpServerEntry .1.3.6.1.4.1.171.14.10.1.3.2 |
dTimeSntpServerEntryAn entry contains information about an SNTP Time server. DTimeSntpServerEntry .1.3.6.1.4.1.171.14.10.1.3.2.1 |
dTimeSntpServerAddrTypeThis object indicates the address type of the SNTP server. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.14.10.1.3.2.1.1 |
dTimeSntpServerAddrIP or IPv6 address of the time server which provides the clock synchronization. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.14.10.1.3.2.1.2 |
dTimeSntpServerVrfNameThis object indicates the name of the routing forwarding instance. A zero length string indicates the VRF name is not specified. For the platform that doesn't support VRF, only a zero length string is allowed for this object. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.14.10.1.3.2.1.3 |
dTimeSntpServerRowStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.14.10.1.3.2.1.4 |
dTimeSntpServerVersionThis object indicates the SNTP server version. When the value of dTimeSntpServerRowStatus at the same row is notInService(2), this object is 0.ro Unsigned32 .1.3.6.1.4.1.171.14.10.1.3.2.1.5 |
dTimeSntpServerLastReceiveThis object indicates the elapsed time that the SNTP time has been synchronized.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.171.14.10.1.3.2.1.6 |
dTimeSntpServerSyncedThis object indicates whether the corresponding server is the current synced server.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.10.1.3.2.1.7 |
dTimeSntpServerBcastThis object indicates whether the server is a broadcast SNTP server.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.10.1.3.2.1.8 |
dTimeMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.10.2 |
dTimeCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.10.2.1 |
dTimeComplianceThe compliance statement for entities which implement the DLINKSW-TIME-MIB. Unknown .1.3.6.1.4.1.171.14.10.2.1.1 |
dTimeGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.10.2.2 |
dTimeSysInfoGroupA collection of objects provides the information for system time. Unknown .1.3.6.1.4.1.171.14.10.2.2.1 |
dTimeClockGroupA collection of objects provides configuration for system time. Unknown .1.3.6.1.4.1.171.14.10.2.2.2 |
dTimeSntpGroupA collection of objects provides configuration for SNTP. Unknown .1.3.6.1.4.1.171.14.10.2.2.3 |
dTimeSummerTimeCfgGroupA collection of objects provides configuration for Daylight Saving Time feature. Unknown .1.3.6.1.4.1.171.14.10.2.2.4 |