DLINKSW-SWITCHPORT-MIB
This MIB module defines objects for per-port configuration which are not covered by standard MIB(s).
Main OID:
dlinkSwSwitchPortMIB.1.3.6.1.4.1.171.14.11
15
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
dlinkSwSwitchPortMIBThis MIB module defines objects for per-port configuration which are not covered by standard MIB(s). MODULE-IDENTITY .1.3.6.1.4.1.171.14.11 |
dSwPortNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.11.0 |
dSwPortObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.11.1 |
dSwPortIfTableA list of physical port interface entries. SEQUENCE OF DSwPortIfEntry .1.3.6.1.4.1.171.14.11.1.1 |
dSwPortIfEntryAn entry in dSwPortIfTable contains port-specific configuration which cannot be covered by standard MIBs (EtherLike or MAU-MIB). DSwPortIfEntry .1.3.6.1.4.1.171.14.11.1.1.1 |
dSwPortIfB1000baseTCtrlThis object can be modified when port speed is configured to 1000BASE-T. other(1) - the port is not 1000BASE-T or master/slave timing mode is not specified. b1000baseTMaster(2) - configure the port operate as master timing. b1000baseTSlave(3) - configure the port operate as slave timing.rw Enumeration .1.3.6.1.4.1.171.14.11.1.1.1.1 |
dSwPortIfB10GbaseTCtrlThis object can be modified when port speed is configured to 10GBASE-T. other(1) - the port is not 10GBASE-T or master/slave timing mode is not specified. b10GbaseTMaster(2) - configure the port operate as master timing. b10GbaseTSlave(3) - configure the port operate as slave timing.rw Enumeration .1.3.6.1.4.1.171.14.11.1.1.1.2 |
dSwPortIfMdixUses the object to configure the state of Media-Dependent Interface Crossover (MDIX) of the port.rw Enumeration .1.3.6.1.4.1.171.14.11.1.1.1.3 |
dSwPortIfJumboFrameSizeThe size of the largest packet which can be received on the interface, specified in octets.rw Unsigned32 .1.3.6.1.4.1.171.14.11.1.1.1.4 |
dSwPortIfSpeedAutoDowngradeThis object indicates whether automatically downgrade the advertised speed in case a link cannot be established at the available speed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.11.1.1.1.5 |
dSwPortConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.11.2 |
dSwPortCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.11.2.1 |
dSwPortComplianceThe compliance statement for entities which implement the DLINKSW-SWITCHPORT-MIB. Unknown .1.3.6.1.4.1.171.14.11.2.1.1 |
dSwPortGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.11.2.2 |
dSwPortBasicGroupThis group contains the collection of fundamental port configuration objects which are not covered by standard MIBs. Unknown .1.3.6.1.4.1.171.14.11.2.2.1 |
More MIBs from D-Link
Browse all D-LinkMIBs →DGS-1210-28XME-BX
SNMP MIB module
2033 objects→
DGS-1210-12TSME-BX
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
2030 objects→
DGS-1210-28XSME-BX
SNMP MIB module
2016 objects→
DGS-1210-28PME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
1942 objects→
DGS-1210-28ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
1941 objects→
DGS-1210-20ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.
1941 objects→