DLINKSW-STP-EXT-MIB
The MIB module for managing D-Link STP extensions which are not covered by standard MIBs.
Main OID:
dlinkSwStpExtMIB.1.3.6.1.4.1.171.14.15
23
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
dlinkSwStpExtMIBThe MIB module for managing D-Link STP extensions which are not covered
by standard MIBs. MODULE-IDENTITY .1.3.6.1.4.1.171.14.15 |
dStpExtMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.15.0 |
dStpExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.15.1 |
dStpExtGblMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.15.1.1 |
dStpExtStpGblStateEnabledThis object enables global spanning-tree function.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.15.1.1.1 |
dStpExtNotificationEnableThis object indicates whether a specified notification is enabled or not.
If a bit corresponding to a notification is set to 1, then
the specified notification can be generated.
newRoot(0) - the newRoot notification as defined in BRIDGE-MIB.
topologyChange(1)
BRIDGE-MIB.rw Bits .1.3.6.1.4.1.171.14.15.1.1.2 |
dStpExtStpNniBpduAddressSpecifies the BPDU MAC address of the NNI port in Q-in-Q status.
dot1d - Use Customer Bridge Group Address (01-80-C2-00-00-00) as
destination address of STP BPDU.
dot1ad - Use Provider Bridge Group Address (01-80-C2-00-00-08) as
destination address of STP BPDU.rw Enumeration .1.3.6.1.4.1.171.14.15.1.1.3 |
dStpExtPortMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.15.1.2 |
dStpExtPortTableA table that contains port-specific information
for the STP extensions. SEQUENCE OF DStpExtPortEntry .1.3.6.1.4.1.171.14.15.1.2.1 |
dStpExtPortEntryAn entry in dStpExtPortTable. This object indicates per port
STP information which is not covered by standard MIB(s). DStpExtPortEntry .1.3.6.1.4.1.171.14.15.1.2.1.1 |
dStpExtPortNumberThe port number of the port for this entry. IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.6.1.4.1.171.14.15.1.2.1.1.1 |
dStpExtPortForwardBpduEnabledThis object indicates whether forward the received STP BPDUs to all
VLAN member ports in untagged form.
dStpExtPortForwardBpduEnabled cannot be set to 'true' when
spanning-tree protocol is enabled on the interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.15.1.2.1.1.2 |
dStpExtPortAdminHelloTimeThis object indicates the time interval to send one BPDU at the
designated port.
dStpExtPortAdminHelloTime only takes effect in MSTP mode.rw Unsigned32 .1.3.6.1.4.1.171.14.15.1.2.1.1.3 |
dStpExtPortStateThis object indicates the state of STP port.
errDisabled(1): the port is at error disabled state.
blocking(2) - broken(6): When STP is enabled on the port and the
port is not at error disabled state, dStpExtPortState
has the same value as dot1dStpPortState, as defined
by application of STP.
noStpForwarding(7) - STP is disabled at the port and this port is
functioning.
nonStpOther(8) - STP is disabled at the port and this port is link-down
or other malfunctioning situations.ro Enumeration .1.3.6.1.4.1.171.14.15.1.2.1.1.4 |
dStpExtMstpMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.15.1.3 |
dStpExtMstpPortTableA table that contains MSTI-specific information
which are not covered by ieee8021MstpPortTable.
Note that entries will exist in this table only for bridge
components for which the corresponding instance of
ieee8021SpanningTreeVersion (from the IEEE8021-SPANNING-TREE-MIB)
has a value of mstp(2) and the corresponding port is not disabled. SEQUENCE OF DStpExtMstpPortEntry .1.3.6.1.4.1.171.14.15.1.3.1 |
dStpExtMstpPortEntryAn entry in dStpExtMstPortTable, which consists of information
is not covered by ieee8021MstpPortTable. DStpExtMstpPortEntry .1.3.6.1.4.1.171.14.15.1.3.1.1 |
dStpExtMstpPortMstIdIn an MSTP Bridge, this parameter is the MSTID, i.e. the
identifier of a Spanning Tree (or MST) Instance. IEEE8021MstIdentifier (IEEE8021-TC-MIB) .1.3.6.1.4.1.171.14.15.1.3.1.1.1 |
dStpExtMstpPortNumIn an MSTP Bridge, the Port's Port Number parameter value for
the MSTI, i.e. the number of the Bridge Port for the MSTI. IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.6.1.4.1.171.14.15.1.3.1.1.2 |
dStpExtMstpPortRoleThe MSTI's current port role as defined by application of MSTP.ro Enumeration .1.3.6.1.4.1.171.14.15.1.3.1.1.3 |
dStpExtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.15.2 |
dStpExtMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.15.2.1 |
dStpExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.15.2.1.2 |
More MIBs from D-Link
Browse all D-LinkMIBs →DGS-1210-28XME-BX
SNMP MIB module
2033 objects→
DGS-1210-12TSME-BX
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
2030 objects→
DGS-1210-28XSME-BX
SNMP MIB module
2016 objects→
DGS-1210-28PME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
1942 objects→
DGS-1210-28ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
1941 objects→
DGS-1210-20ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.
1941 objects→