DLINKSW-STORM-CTRL-MIB
This MIB module defines objects for Storm Control
Main OID:
dlinkSwStormCtrlMIB.1.3.6.1.4.1.171.14.25
31
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
dlinkSwStormCtrlMIBThis MIB module defines objects for Storm Control MODULE-IDENTITY .1.3.6.1.4.1.171.14.25 |
dStormCtrlMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.25.0 |
dStormCtrlOccurredThis trap is sent when dStormCtrlNotifyEnable is 'stormOccurred' or 'both' and a storm is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.25.0.1 |
dStormCtrlStormClearedThis trap is sent when dStormCtrlNotifyEnable is 'stormCleared' or 'both' and a storm is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.25.0.2 |
dStormCtrlMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.25.1 |
dStormCtrlGentrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.25.1.1 |
dStormCtrlNotifyEnableThis object controls when a storm control notification will be generated. If the object is set to none(1): No notifications will be generated. stormOccurred(2): A notification will be generated when a storm event is detected. stormCleared(3): A notification will be generated when a storm event is cleared. both (4): A notification will be generated both when a storm event is detected and cleared. NOTE:The default value of this object is none(1).rw Enumeration .1.3.6.1.4.1.171.14.25.1.1.1 |
dStormCtrlPollingIntervalThe interval, in seconds, the switch detects the storm.rw Unsigned32 .1.3.6.1.4.1.171.14.25.1.1.2 |
dStormCtrlPollingRetriesSpecify the retry count. If the action is configured as 'shutdown' mode and storm keep as long as interval * retries, the port will enters error-disabled state. The effective range is from 1 to 360. 0 means that a 'shutdown' mode port will directly enter error-disabled state when storm is detected. -1 means that a 'shutdown' mode port will never enter error-disabled state even if storm is detected.rw Integer32 (-1 | 0 | 1.. 360) .1.3.6.1.4.1.171.14.25.1.1.3 |
dStormCtrlThresholdTableA table consists of a list of interface-specific threshold configuration for storm control. SEQUENCE OF DStormCtrlThresholdEntry .1.3.6.1.4.1.171.14.25.1.2 |
dStormCtrlThresholdEntryAn entry presents threshold configuration on an interface. DStormCtrlThresholdEntry .1.3.6.1.4.1.171.14.25.1.2.1 |
dStormCtrlTrafficTypeThis object indicates the traffic type of the entry. DStormCtlTrafficType .1.3.6.1.4.1.171.14.25.1.2.1.1 |
dStormCtrlThresholdTypeThis object indicates the threshold type of the entry.rw DStormCtlThrType .1.3.6.1.4.1.171.14.25.1.2.1.2 |
dStormCtrlRiseThresholdValueSpecifies the rise threshold value of the entry. A special value of -1 indicates the storm control of the corresponding traffic type is not enabled on that interface.rw DStormCtlThrTypeValue .1.3.6.1.4.1.171.14.25.1.2.1.3 |
dStormCtrlLowThresholdValueSpecifies the low level threshold. A special value of -1 indicates low level is not specified. The default value will be 80% of the value of the corresponding dStormCtrlRiseThresholdValue if applicable.rw DStormCtlThrTypeValue .1.3.6.1.4.1.171.14.25.1.2.1.4 |
dStormCtrlIfTableA table consists of a list of interface-specific configuration for storm control. SEQUENCE OF DStormCtrlIfEntry .1.3.6.1.4.1.171.14.25.1.3 |
dStormCtrlIfEntryAn entry presents storm control configuration on an interface. DStormCtrlIfEntry .1.3.6.1.4.1.171.14.25.1.3.1 |
dStormCtrlIfActionTypeSpecify the action will be taken when storm occurs: none(1) - Not filter the storm packets. shutdown(2) - The storm-control shutdown the port when the rise threshold is reached. drop(3) - The storm-control always discards packets that exceed the rise threshold.rw Enumeration .1.3.6.1.4.1.171.14.25.1.3.1.1 |
dStormCtrlTrafficInfoTableA table consists of a list of status information for traffic types on interfaces. Only the interface/traffic-type on which the storm control is enabled will present on this table. SEQUENCE OF DStormCtrlTrafficInfoEntry .1.3.6.1.4.1.171.14.25.1.4 |
dStormCtrlTrafficInfoEntryAn entry presents the status of a traffic type on an interface. DStormCtrlTrafficInfoEntry .1.3.6.1.4.1.171.14.25.1.4.1 |
dStormCtrlCurTrafficUnitTypeThis object indicates the current traffic unit of the entry.ro DStormCtlThrType .1.3.6.1.4.1.171.14.25.1.4.1.1 |
dStormCtrlCurTrafficValueIndicating the current traffic value on the interface.ro DStormCtlThrTypeValue .1.3.6.1.4.1.171.14.25.1.4.1.2 |
dStormCtrlTrafficInfoStatusThis object indicates the current status of storm control on a given interface for a given traffic type. forwarding(1): no storm event has been detected. dropped(2): a storm event has occurred and the storm traffic exceeding the threshold is dropped. errorDisabled(3): the port is disabled due to a storm. linkDown(4): the port is physically linked down. inactive(5): Indicates that storm control is not enabled for the given traffic type.ro Enumeration .1.3.6.1.4.1.171.14.25.1.4.1.3 |
dStormCtrlNotifyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.25.1.5 |
dStormCtrlNotifyTrafficTypeThis object is used by dStormCtrlOccurred and dStormCtrlStormCleared to indicate the traffic type of the occurred storm.ro DStormCtlTrafficType .1.3.6.1.4.1.171.14.25.1.5.1 |
dStormCtrlMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.25.2 |
dStormCtrlCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.25.2.1 |
dStormCtrlComplianceThe compliance statement for entities which implement the DLINKSW-STORM-CTRL-MIB. Unknown .1.3.6.1.4.1.171.14.25.2.1.1 |
dStormCtrlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.25.2.2 |
dStormCtrlBaiscGroupA collection of objects providing the information for storm control Unknown .1.3.6.1.4.1.171.14.25.2.2.1 |
dStormCtrlNotifyGroupThe collection of notifications used for storm control. Unknown .1.3.6.1.4.1.171.14.25.2.2.2 |