DLINKSW-STACK-MIB
AI MIB Summary
The DLINKSW-STACK-MIB enables monitoring and management of D-Link switch stacking topologies, specifically tracking stack member status, priority configurations, and unit synchronization states. It provides granular visibility into stack formation, link aggregation, and failover conditions to ensure high availability in multi-switch deployments.
This MIB module defines objects for stacking feature.
Main OID:
dlinkSwStackMIB.1.3.6.1.4.1.171.14.9
44
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
dlinkSwStackMIBThis MIB module defines objects for stacking feature. MODULE-IDENTITY .1.3.6.1.4.1.171.14.9 |
dStackMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.9.0 |
dStackInsertNotificationDevice Hot Insert notification. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.9.0.1 |
dStackRemoveNotificationDevice Hot Remove notification. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.9.0.2 |
dStackFailureNotificationDevice Failure notification. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.9.0.3 |
dStackTPChangeNotificationThe stacking topology change notification. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.9.0.4 |
dStackRoleChangeNotificationThe stacking device role change notification. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.9.0.5 |
dStackMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.9.1 |
dStackMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.9.1.1 |
dStackTopologyThis object indicates the state of the stacking topology.ro Enumeration .1.3.6.1.4.1.171.14.9.1.1.1 |
dStackMyBoxIdThis object indicates the box ID of the device.ro Integer32 .1.3.6.1.4.1.171.14.9.1.1.2 |
dStackNumOfDevicesThis object indicates the current number of devices in the stacking system.ro Integer32 .1.3.6.1.4.1.171.14.9.1.1.3 |
dStackAdminEnabledThis object indicates whether the administrative stacking mode has been enabled or not. The new setting will not take effect until the next reboot.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.9.1.1.4 |
dStackPreemptThis object indicates whether the preemption is enabled or not. When preemption is enabled, the unit that play master role will change as units with better priority are added to the stack.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.9.1.1.5 |
dStackTrapStateEnabledThis object indicates whether the sending of stacking related traps is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.9.1.1.6 |
dStackBandwidthThis object indicates the stacking port bandwidth. twoPorts - two ports are used for stacking, each port works as a SIO port fourPorts - four ports are used for stacking, each two ports are aggregated together and work as a SIO port. The stacking port bandwidth setting of a switch device must be set before the switch unit can be chained with other switch devices. The setting will be saved on local switch unit if the user saves the configuration. The change of stacking port bandwidth will not take effect until the next reboot.rw Enumeration .1.3.6.1.4.1.171.14.9.1.1.7 |
dStackUnitInfoTableThis table displays the information of the devices in the stacking system. When stacking mode is not effectively enabled, there is no entry in this table. SEQUENCE OF DStackUnitInfoEntry .1.3.6.1.4.1.171.14.9.1.1.8 |
dStackUnitInfoEntryAn entry (conceptual row) in dStackUnitInfoTable. DStackUnitInfoEntry .1.3.6.1.4.1.171.14.9.1.1.8.1 |
dStackInfoBoxIdThis object indicates box ID of the entry. Integer32 .1.3.6.1.4.1.171.14.9.1.1.8.1.1 |
dStackInfoExistThe state of existence of the unit.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.9.1.1.8.1.2 |
dStackInfoRoleThe stacking role of the unit.ro Enumeration .1.3.6.1.4.1.171.14.9.1.1.8.1.3 |
dStackInfoUserSetBoxIdThe assigned box ID of the stacking unit. The switch unit cannot be added to a switch stack if its box ID is conflict with existing switch units in the stack. When read, the value of 0 indicates the box ID of the device is automatically assigned. Note: the newly changed (setting) box ID will take effect after the next boot.rw Integer32 .1.3.6.1.4.1.171.14.9.1.1.8.1.4 |
dStackInfoModuleNameThis object indicates the module name of the device.ro DisplayString .1.3.6.1.4.1.171.14.9.1.1.8.1.5 |
dStackInfoPriorityThe priority of the stacking device. When read, if preemption is disabled, the master use 0 (the highest priority) to make sure the current master can hold off the challenges from other devices. The special value of 0 is not allowed for 'SET' operation.rw Integer32 .1.3.6.1.4.1.171.14.9.1.1.8.1.6 |
dStackInfoMacAddrThe MAC address of the device.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.14.9.1.1.8.1.7 |
dStackInfoPromVersionA textual string containing the PROM version of the stacking device.ro DisplayString .1.3.6.1.4.1.171.14.9.1.1.8.1.8 |
dStackInfoFirmwareVerA textual string containing the firmware version of the stacking device.ro DisplayString .1.3.6.1.4.1.171.14.9.1.1.8.1.9 |
dStackInfoHardwareVerA textual string containing the hardware version of the stacking device.ro DisplayString .1.3.6.1.4.1.171.14.9.1.1.8.1.10 |
dStackInfoAdminBandwidthThis object indicates the administrative stacking port bandwidth of the device.ro Enumeration .1.3.6.1.4.1.171.14.9.1.1.8.1.11 |
dStackInfoSIO1ActiveBandwidthIndicates the current link bandwidth in the SIO1. onePort - only one port is linked in the SIO1. twoPorts - two ports are linked in the SIO1. linkDown - SIO1 is link downro Enumeration .1.3.6.1.4.1.171.14.9.1.1.8.1.12 |
dStackInfoSIO2ActiveBandwidthIndicates the current link bandwidth in the SIO2. onePort - only one port is linked in the SIO2. twoPorts - two ports are linked in the SIO2. linkDown - SIO2 is link downro Enumeration .1.3.6.1.4.1.171.14.9.1.1.8.1.13 |
dStackInfoStartPortThis object indicates the starting port of this unit.ro Integer32 .1.3.6.1.4.1.171.14.9.1.1.8.1.14 |
dStackInfoPortRangeThis object indicates the total ports of this unit.ro Integer32 .1.3.6.1.4.1.171.14.9.1.1.8.1.15 |
dStackNotificationInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.9.1.2 |
dStackNotifyInfoBoxIdThis object indicates box ID of the notification.ro Integer32 .1.3.6.1.4.1.171.14.9.1.2.1 |
dStackNotifyInfoTopologyTypeThis object indicates the current stacking topology of the notification.ro Enumeration .1.3.6.1.4.1.171.14.9.1.2.2 |
dStackNotifyInfoRoleChangeTypeThis object indicates stacking role change of the notification.ro Enumeration .1.3.6.1.4.1.171.14.9.1.2.3 |
dStackMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.9.2 |
dStackMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.9.2.1 |
dStackComplianceThe compliance statement for entities which implement the DLINKSW-STACK-MIB. Unknown .1.3.6.1.4.1.171.14.9.2.1.1 |
dStackMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.9.2.2 |
dStackBasicMgmtGroupA collection of objects provides basic management and information for stacking feature. Unknown .1.3.6.1.4.1.171.14.9.2.2.1 |
dStackBandwidthMgmtGroupA collection of objects providing management and information for stacking port bandwidth. Unknown .1.3.6.1.4.1.171.14.9.2.2.2 |
dStackNotifGroupA collection of notifications for indicating the status change of stacking. Unknown .1.3.6.1.4.1.171.14.9.2.2.3 |