DLINKSW-ENTITY-EXT-MIB
This MIB module provides essential information about the system and defines the managed objects that support the monitoring of alarms generated by physical entities, including temperature sensors, fans and power supplies.
Main OID:
dlinkSwEntityExtMIB.1.3.6.1.4.1.171.14.5
76
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
76 total| Object Name |
|---|
dlinkSwEntityExtMIBThis MIB module provides essential information about the system and defines the managed objects that support the monitoring of alarms generated by physical entities, including temperature sensors, fans and power supplies. MODULE-IDENTITY .1.3.6.1.4.1.171.14.5 |
dEntityExtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.5.0 |
dEntityExtFanStatusChgThis trap indicates a fan fails (dEntityExtEnvFanStatus is 'fault') or recovers (dEntityExtEnvFanStatus is 'ok'). NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.5.0.1 |
dEntityExtThermalStatusChgThis trap indicates a thermal alarms (dEntityExtEnvTempStatus is 'abnormal') or recovers (dEntityExtEnvTempStatus is 'ok'). NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.5.0.2 |
dEntityExtPowerStatusChgThis trap indicates a power module fails, recovers or is removed. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.5.0.3 |
dEntityExtAirFlowChgThis trap is triggered when the air flow status is changed from 'ok' to 'abnormal' and vice versa. dEntityExtEnvAirFlowStatus indicates the current (new) fan air flow state. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.5.0.4 |
dEntityExtFactoryResetButtonThis trap is triggered when the factory reset button was pressed. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.5.0.5 |
dEntityExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.5.1 |
dEntityExtEnvObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.5.1.1 |
dEntityExtEnvTempTableThe table consists of a list of temperature information. SEQUENCE OF DEntityExtEnvTempEntry .1.3.6.1.4.1.171.14.5.1.1.1 |
dEntityExtEnvTempEntryAn entry represents the temperature status of a testpoint. DEntityExtEnvTempEntry .1.3.6.1.4.1.171.14.5.1.1.1.1 |
dEntityExtEnvTempUnitIdThis object indicates the unit (stacking device) or slot (chassis device) ID at which the testpoint is located. Unsigned32 .1.3.6.1.4.1.171.14.5.1.1.1.1.1 |
dEntityExtEnvTempIndexThis object is used to uniquely identify the testpoint within a unit/slot. This index is for SNMP purposes only, and has no intrinsic meaning. Integer32 .1.3.6.1.4.1.171.14.5.1.1.1.1.2 |
dEntityExtEnvTempDescrThis object provides human-sensible identification for the testpoint. e.g. 'Inlet', 'Center', 'Outlet'.ro DisplayString .1.3.6.1.4.1.171.14.5.1.1.1.1.3 |
dEntityExtEnvTempCurrentThis object indicates the current measurement of the testpoint.ro Integer32 UNITS "degrees Celsius" .1.3.6.1.4.1.171.14.5.1.1.1.1.4 |
dEntityExtEnvTempThresholdLowThe object indicates the minimum acceptable reading of the testpoint in degrees Celsius.rw Integer32 UNITS "degrees Celsius" .1.3.6.1.4.1.171.14.5.1.1.1.1.5 |
dEntityExtEnvTempThresholdHighThe object indicates the maximum acceptable reading of the testpoint in degrees Celsius.rw Integer32 UNITS "degrees Celsius" .1.3.6.1.4.1.171.14.5.1.1.1.1.6 |
dEntityExtEnvTempStatusThe object indicates the current temperature is over the thresholds or not. 'abnormal' indicates the temperature is over the thresholds. 'ok' indicates the temperature is not over the thresholds.ro Enumeration .1.3.6.1.4.1.171.14.5.1.1.1.1.7 |
dEntityExtEnvFanTableThe table is used to display the status of fans. SEQUENCE OF DEntityExtEnvFanEntry .1.3.6.1.4.1.171.14.5.1.1.2 |
dEntityExtEnvFanEntryAn entry represents a fan status. DEntityExtEnvFanEntry .1.3.6.1.4.1.171.14.5.1.1.2.1 |
dEntityExtEnvFanUnitIdThis object indicates the unit (stacking device) or slot (chassis device) ID at which the fan is located. Unsigned32 .1.3.6.1.4.1.171.14.5.1.1.2.1.1 |
dEntityExtEnvFanIndexThis object is used to uniquely identify the fan within a unit/slot. This index is for SNMP purposes only, and has no intrinsic meaning. Integer32 .1.3.6.1.4.1.171.14.5.1.1.2.1.2 |
dEntityExtEnvFanDescrThis object provides human-sensible identification for the fan. e.g. 'Left 1' for the first fan on the left.ro DisplayString .1.3.6.1.4.1.171.14.5.1.1.2.1.3 |
dEntityExtEnvFanStatusThis object indicates the fan status.ro Enumeration .1.3.6.1.4.1.171.14.5.1.1.2.1.4 |
dEntityExtEnvPowerTableThe table is used to display the status of the power modules. SEQUENCE OF DEntityExtEnvPowerEntry .1.3.6.1.4.1.171.14.5.1.1.3 |
dEntityExtEnvPowerEntryAn entry contains the information of a power module. DEntityExtEnvPowerEntry .1.3.6.1.4.1.171.14.5.1.1.3.1 |
dEntityExtEnvPowerUnitIdThis object indicates the unit (stacking device) or slot (chassis device) ID at which the power module is located. Unsigned32 .1.3.6.1.4.1.171.14.5.1.1.3.1.1 |
dEntityExtEnvPowerIndexThis object indicates the ID of the power module. This object is used to uniquely identify the power module. This index is for SNMP purposes only, and has no intrinsic meaning. Unsigned32 .1.3.6.1.4.1.171.14.5.1.1.3.1.2 |
dEntityExtEnvPowerDescrThis object provides human-sensible information for the power module. e.g. '#1 (internal)', '#2 (external)'.ro DisplayString .1.3.6.1.4.1.171.14.5.1.1.3.1.3 |
dEntityExtEnvPowerUsedPowerThis object indicates the amount of the power that has been allocated.ro Unsigned32 UNITS "watts" .1.3.6.1.4.1.171.14.5.1.1.3.1.4 |
dEntityExtEnvPowerMaxPowerThis object indicates maximum power which the power module can supply.ro Unsigned32 UNITS "watts" .1.3.6.1.4.1.171.14.5.1.1.3.1.5 |
dEntityExtEnvPowerStatusThis object indicates the status of the power.ro Enumeration .1.3.6.1.4.1.171.14.5.1.1.3.1.6 |
dEntityExtEnvAirFlowTableThe table is used to display the status of the air flow function. SEQUENCE OF DEntityExtEnvAirFlowEntry .1.3.6.1.4.1.171.14.5.1.1.4 |
dEntityExtEnvAirFlowEntryAn entry contains the information of the air flow function. DEntityExtEnvAirFlowEntry .1.3.6.1.4.1.171.14.5.1.1.4.1 |
dEntityExtEnvAirFlowUnitIdThis object indicates the unit (stacking device) or slot (chassis device) ID at which the air flow module is located. Unsigned32 .1.3.6.1.4.1.171.14.5.1.1.4.1.1 |
dEntityExtEnvAirFlowStatusThis object indicates the status of the air flow. The fans' air flow direction must match the system's air flow direction to form an integrated air flow. For example: In DXS-3600, the normal fans' air flow direction must match the power fan's air flow direction. The power fan blow the cold air from outside to inside, all the normal fans must blow the hot air from inside to outside. Or the power fan blow the hot air from inside to outside, all the normal fans must blow the cold air from outside to inside. If one or more fans' air flow direction does not match the system's air flow direction, it will form an abnormal air flow. Then this log message will be triggered. ok(1) : A recover event indicates the air flow back to normal. abnormal(2): An alarm event indicates the air flow detects abnormal.ro Enumeration .1.3.6.1.4.1.171.14.5.1.1.4.1.2 |
dEntityExtEnvTrap OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.5.1.2 |
dEntityExtEnvNotifyEnableThis object indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification can be generated. fan(0) - fan trap state for warning fan event (fan failed or fan recover). power(1) - power trap state for warning power event (power failure or power recovery). temperature(2) - temperature trap state for warning temperature event (temperature exceeds the thresholds or temperature recover).rw Bits .1.3.6.1.4.1.171.14.5.1.2.1 |
dEntityExtUnitTableThe table is used to display information of units. SEQUENCE OF DEntityExtUnitEntry .1.3.6.1.4.1.171.14.5.1.3 |
dEntityExtUnitEntryAn entry contains essential information of a unit. DEntityExtUnitEntry .1.3.6.1.4.1.171.14.5.1.3.1 |
dEntityExtUnitIndexThis object indicates the unit (stacking device) or slot (chassis device) ID. Unsigned32 .1.3.6.1.4.1.171.14.5.1.3.1.1 |
dEntityExtUnitStatusThis object represents the status of the unit: ok(1) - This indicates the unit is okay. failed(2) - This indicates the unit fails due to some reason. empty(3) - This indicates that the unit is provisioned but currently not installed.ro Enumeration .1.3.6.1.4.1.171.14.5.1.3.1.2 |
dEntityExtUnitUpTimeThis object provides the up time in units of seconds for the unit since it was last re-initialized.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.171.14.5.1.3.1.3 |
dEntityExtMemoryUtilTableThe table is used to display memory utilization information. SEQUENCE OF DEntityExtMemoryUtilEntry .1.3.6.1.4.1.171.14.5.1.4 |
dEntityExtMemoryUtilEntryAn entry contains memory utilization information. DEntityExtMemoryUtilEntry .1.3.6.1.4.1.171.14.5.1.4.1 |
dEntityExtMemUtilUnitIdThis object indicates the unit (stacking device) or slot (chassis device) ID. Integer32 .1.3.6.1.4.1.171.14.5.1.4.1.1 |
dEntityExtMemUtilTypeThe object indicates the memory type of the entry. Enumeration .1.3.6.1.4.1.171.14.5.1.4.1.2 |
dEntityExtMemUtilTotalThis object indicates the total memory size of the entry.ro Unsigned32 UNITS "KB" .1.3.6.1.4.1.171.14.5.1.4.1.3 |
dEntityExtMemUtilUsedThis object indicates the used memory size of the entry.ro Unsigned32 UNITS "KB" .1.3.6.1.4.1.171.14.5.1.4.1.4 |
dEntityExtMemUtilFreeThis object indicates the free memory size of the entry.ro Unsigned32 UNITS "KB" .1.3.6.1.4.1.171.14.5.1.4.1.5 |
dEntityExtCpuUtilTableThe table is used to display CPU utilization information. SEQUENCE OF DEntityExtCpuUtilEntry .1.3.6.1.4.1.171.14.5.1.7 |
dEntityExtCpuUtilEntryAn entry contains CPU information. DEntityExtCpuUtilEntry .1.3.6.1.4.1.171.14.5.1.7.1 |
dEntityExtCpuUtilUnitIdThis object indicates the unit (stacking device) or slot (chassis device) ID. Unsigned32 .1.3.6.1.4.1.171.14.5.1.7.1.1 |
dEntityExtCpuUtilCpuIDThis object is used to uniquely identify the CPU within a unit (multiprocessing system). Unsigned32 .1.3.6.1.4.1.171.14.5.1.7.1.2 |
dEntityExtCpuUtilFiveSecondsThis objects indicates the overall CPU busy percentage in the last 5 second period. The value will be between 0% (idle) and 100% (very busy).ro Unsigned32 UNITS "percentage" .1.3.6.1.4.1.171.14.5.1.7.1.3 |
dEntityExtCpuUtilOneMinuteThis objects indicates the overall CPU busy percentage in the last 1 minute period. The value will be between 0% (idle) and 100% (very busy).ro Unsigned32 UNITS "percentage" .1.3.6.1.4.1.171.14.5.1.7.1.4 |
dEntityExtCpuUtilFiveMinutesThis objects indicates the overall CPU busy percentage in the last 5 minute period. The value will be between 0% (idle) and 100% (very busy).ro Unsigned32 .1.3.6.1.4.1.171.14.5.1.7.1.5 |
dEntityExtVersionTableThe table is used to display version information of units. SEQUENCE OF DEntityExtVersionEntry .1.3.6.1.4.1.171.14.5.1.8 |
dEntityExtVersionEntryAn entry contains version information of a unit. DEntityExtVersionEntry .1.3.6.1.4.1.171.14.5.1.8.1 |
dEntityExtVersionUnitIdThis object indicates the unit (stacking device) or slot (chassis device) ID. Unsigned32 .1.3.6.1.4.1.171.14.5.1.8.1.1 |
dEntityExtVersionBootloaderThis object indicates the bootloader version of the unit.ro DisplayString .1.3.6.1.4.1.171.14.5.1.8.1.2 |
dEntityExtVersionRuntimeThis object indicates the firmware version of one unit.ro DisplayString .1.3.6.1.4.1.171.14.5.1.8.1.3 |
dEntityExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.5.2 |
dEntityExtMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.5.2.1 |
dEntityExtComplianceThe compliance statement for entities which implement the DLINKSW-ENTITY-EXT-MIB. Unknown .1.3.6.1.4.1.171.14.5.2.1.1 |
dEntityExtMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.5.2.2 |
dEntityExtTempGroupA collection of objects provides information of the system temperature. Unknown .1.3.6.1.4.1.171.14.5.2.2.1 |
dEntityExtFanGroupA collection of objects providing informations of fans. Unknown .1.3.6.1.4.1.171.14.5.2.2.2 |
dEntityExtPowerGroupA collection of objects providing information of power modules. Unknown .1.3.6.1.4.1.171.14.5.2.2.3 |
dEntityExtSystemInfoGroupA collection of objects provides information of the system temperature. Unknown .1.3.6.1.4.1.171.14.5.2.2.4 |
dEntityExtGenericNotifInfoGroupA collection of objects provides generic information for binding variables of notification. Unknown .1.3.6.1.4.1.171.14.5.2.2.5 |
dEntityExtFanNotifGroupA collection of notifications for indicating the status change of fans. Unknown .1.3.6.1.4.1.171.14.5.2.2.6 |
dEntityExtThermalNotifGroupA collection of notifications for indicating the status change of thermals. Unknown .1.3.6.1.4.1.171.14.5.2.2.7 |
dEntityExtPowerNotifGroupA collection of notifications for indicating the status change of power module. Unknown .1.3.6.1.4.1.171.14.5.2.2.8 |
dEntityExtAirFlowNotifGroupA collection of notifications for indicating the status change of the air flow. Unknown .1.3.6.1.4.1.171.14.5.2.2.9 |
dEntityExtFactoryResetButtonNotifGroupA collection of notifications for indicating the factory reset button. Unknown .1.3.6.1.4.1.171.14.5.2.2.10 |