Home/Catalog/DLINKSW-DOS-PREVENT-MIB

DLINKSW-DOS-PREVENT-MIB

AI MIB Summary

The DLINKSW-DOS-PREVENT-MIB manages Denial-of-Service (DoS) protection parameters on D-Link switches, exposing counters for blocked attack traffic, triggered protection thresholds, and active mitigation session states.

This MIB contains managed objects for the DOS Protection application of the device.
Main OID:
dlinkSwDosPrevMIB.1.3.6.1.4.1.171.14.59
31
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

31 total
Object Name
dlinkSwDosPrevMIBThis MIB contains managed objects for the DOS Protection application of the device.
MODULE-IDENTITY
.1.3.6.1.4.1.171.14.59
dDosPrevMIBNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.59.0
dDosPreveAttackDetectedThis trap is sent when dDosPrevGlobalNotifsEnabled is 'true' and the DoS attack occurs in the past 5 minutes.
NOTIFICATION-TYPE
.1.3.6.1.4.1.171.14.59.0.1
dDosPreveAttackDetectedPacketThis trap is sent when dDosPrevGlobalNotifsEnabled is 'true' and the DoS attack occurs to detect the dropped attack packets.
NOTIFICATION-TYPE
.1.3.6.1.4.1.171.14.59.0.2
dDosPrevMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.59.1
dDosPrevGlobalNotifsEnabledSet to 'true' to enable global SNMP notification for DoS prevention feature. Setting the object to 'false' will disable SNMP notifications.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.171.14.59.1.1
dDosPrevNotifyInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.59.1.2
dDosPrevNotiInfoDropFramesCountThis object indicates the total dropped packets due to DoS attack in the past 5 minutes.ro
Counter64
.1.3.6.1.4.1.171.14.59.1.2.1
dDosPrevNotiInfoDropIpAddrIf the DoS packet is from the end station, represent the IP address of attacker; otherwise represent the router's IP.ro
IpAddress
.1.3.6.1.4.1.171.14.59.1.2.2
dDosPrevNotiInfoDropPortNumberThis object indicates the attacked port number.ro
INTEGER
.1.3.6.1.4.1.171.14.59.1.2.3
dDosPrevCtrlTableA table includes the settings of all DoS prevention types supported by the Switch. Note: the special attack type 'all' is not included in this table.
SEQUENCE OF DDosPrevCtrlEntry
.1.3.6.1.4.1.171.14.59.1.3
dDosPrevCtrlEntryA single entry in the DoS prevention control table.
DDosPrevCtrlEntry
.1.3.6.1.4.1.171.14.59.1.3.1
dDoSPrevCtrlAttackTypeThis object indicates the DoS attack type.
DosAttackType
.1.3.6.1.4.1.171.14.59.1.3.1.1
dDoSPrevCtrlEnabledThis object indicates the state of the DoS attack type. Setting this object to 'false' will reset other columnar objects in the same row.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.171.14.59.1.3.1.2
dDoSPrevCtrlActionTypeThis object indicates the action for the DoS prevention type. If this object is set to 'redirect' and dDoSPrevCtrlEnabled is 'true', the configuration will not take effect until a valid redirect port (dDoSPrevCtrlRedirectPort) is specified. If redirect port is not valid, the switch behaves same as 'drop' is set.rw
Enumeration
.1.3.6.1.4.1.171.14.59.1.3.1.3
dDoSPrevCtrlRedirectPortThis object indicates the port to which the attacking packet will be redirected. A value of 0 means redirect port is unspecified. This object can only be modified for entries whose value of dDoSPrevCtrlEnabled is 'true' and dDoSPrevCtrlActionType is 'redirect'. Otherwise, inconsistentValue error will be returned.rw
InterfaceIndexOrZero (IF-MIB)
.1.3.6.1.4.1.171.14.59.1.3.1.4
dDoSPrevCtrlRedirectPriorityThis object configures the priority for the redirected attacking packets. Valid priority values are from 0 to 7. A value of 8 indicates that the original priority will not be changed when the packet is redirected. This object can only be modified for entries whose value of dDoSPrevCtrlEnabled is 'true', dDoSPrevCtrlActionType is 'redirect' and dDoSPrevCtrlRedirectPort is specified. Otherwise, inconsistentValue error will be returned.rw
INTEGER
.1.3.6.1.4.1.171.14.59.1.3.1.5
dDoSPrevCtrlRedirectRateLimitThis object indicates the rate-limit (kilobit per second) for redirecting DoS attacking packets. The valid range and granularity is project dependent. A value of 0 indicates that there is no limit for redirecting DoS attacking packets. This object can only be modified for entries whose value of dDoSPrevCtrlEnabled is 'true', dDoSPrevCtrlActionType is 'redirect' and dDoSPrevCtrlRedirectPort is specified. Otherwise, inconsistentValue error will be returned.rw
Unsigned32
.1.3.6.1.4.1.171.14.59.1.3.1.6
dDoSPrevCounterTableThe table contains the counters of DoS prevention types supported by the Switch. This table only contains one entry of attack type is 'all' if per DoS-type counters is not supported.
SEQUENCE OF DDoSPrevCounterEntry
.1.3.6.1.4.1.171.14.59.1.4
dDoSPrevCounterEntryA single entry in the DoS prevention counter table.
DDoSPrevCounterEntry
.1.3.6.1.4.1.171.14.59.1.4.1
dDoSPrevCounterAttackTypeThis object indicates the DoS attack type.
DosAttackType
.1.3.6.1.4.1.171.14.59.1.4.1.1
dDoSPrevCounterFrameCountThis object indicates the number of frames detected for the DoS attack prevention type.ro
Counter64
.1.3.6.1.4.1.171.14.59.1.4.1.2
dDoSPrevCounterClearCounterThis object is used to reset the counter of the specific attack type when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.rw
Enumeration
.1.3.6.1.4.1.171.14.59.1.4.1.3
dDosPrevMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.59.2
dDosPrevMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.59.2.1
dDosPrevMIBComplianceThe compliance statement for the DoS Prevention MIB.
Unknown
.1.3.6.1.4.1.171.14.59.2.1.1
dDosPrevMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.59.2.2
dDosPrevBasicGroupThe collection of objects provides basic control for DoS Prevention.
Unknown
.1.3.6.1.4.1.171.14.59.2.2.1
dDosPrevActionRedirectCtrlGroupThe collection of objects provides the advanced action control for DoS Prevention.
Unknown
.1.3.6.1.4.1.171.14.59.2.2.2
dDosPrevNotifyObjectGroupThe collection of objects provides the control and information of DoS notifications.
Unknown
.1.3.6.1.4.1.171.14.59.2.2.3
dDosPrevNotificationsGroupThe collection of objects provides DoS notifications.
Unknown
.1.3.6.1.4.1.171.14.59.2.2.4
DLINKSW-DOS-PREVENT-MIB - SNMP MIB Reference | MIBs Explorer