DLINKSW-CPU-PROTECT-MIB
The MIB module for managing CPU protection.
Main OID:
dlinkSwCpuProtectMIB.1.3.6.1.4.1.171.14.19
33
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
dlinkSwCpuProtectMIBThe MIB module for managing CPU protection. MODULE-IDENTITY .1.3.6.1.4.1.171.14.19 |
dCpuProtectMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.19.0 |
dCpuProtectMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.19.1 |
dCpuProtectMIBObjectsCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.19.1.2 |
dCpuProtectProtoRateLimitTableThe object configure the rate-limit of traffic destined to CPU based on protocol type. SEQUENCE OF DCpuProtectProtoRateLimitEntry .1.3.6.1.4.1.171.14.19.1.2.1 |
dCpuProtectProtoRateLimitEntryThe object configures rate-limit control based on a specific protocol type. DCpuProtectProtoRateLimitEntry .1.3.6.1.4.1.171.14.19.1.2.1.1 |
dCpuProtectProtoRLTypeThis object indicates the protocol type. CpuProtectProtocolType .1.3.6.1.4.1.171.14.19.1.2.1.1.1 |
dCpuProtectProtoRLRateThis object indicates the rate-limit of the specific protocol type. The value of -1 has the special meaning of identifying that there is no rate-limit of the specific protocol type.rw MaxRate .1.3.6.1.4.1.171.14.19.1.2.1.1.2 |
dCpuProtectProtoRLClearCounterThis object is used to reset the counter of the specific protocol type when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.rw Enumeration .1.3.6.1.4.1.171.14.19.1.2.1.1.3 |
dCpuProtectSubIntfRLTableThis table consists of the rate-limit information of the sub-interface. SEQUENCE OF DCpuProtectSubIntfRLEntry .1.3.6.1.4.1.171.14.19.1.2.2 |
dCpuProtectSubIntfRLEntryThe object configure rate-limit control based on a specific sub-interface. DCpuProtectSubIntfRLEntry .1.3.6.1.4.1.171.14.19.1.2.2.1 |
dCpuProtectSubIntfRLTypeThis object indicates the type of sub-interface. Enumeration .1.3.6.1.4.1.171.14.19.1.2.2.1.1 |
dCpuProtectSubIntfRLRateThis object indicates the rate-limit of the specific sub-interface. The value of -1 has the special meaning of identifying that there is no rate-limit of the specific sub-interface.rw MaxRate .1.3.6.1.4.1.171.14.19.1.2.2.1.2 |
dCpuProtectSubIntfRLClearCounterThis object is used to reset the counter of the specific sub-interface when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.rw Enumeration .1.3.6.1.4.1.171.14.19.1.2.2.1.3 |
dCpuProtectMIBObjectsCounters OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.19.1.3 |
dCpuProtectProtoRLCntTableThis table consists of the traffic statistics by protocol type. SEQUENCE OF DCpuProtectProtoRLCntEntry .1.3.6.1.4.1.171.14.19.1.3.1 |
dCpuProtectProtoRLCntEntryThe per unit/slot traffic statistics about a protocol type. Objects in this table are read-only and appear automatically whenever the value of dCpuProtectProtoRLRate of a row in the dCpuProtectProtoRateLimitTable is not -1 (no-limit). DCpuProtectProtoRLCntEntry .1.3.6.1.4.1.171.14.19.1.3.1.1 |
dCpuProtectProtoRLCntTypeThis object indicates the Protocol type. CpuProtectProtocolType .1.3.6.1.4.1.171.14.19.1.3.1.1.1 |
dCpuProtectProtoRLCntUnitIDThis object indicates the unit/slot ID (for a chassis device) or unit number (for stacking device). For a standalone device, 0 is used for UnitID. UnitID .1.3.6.1.4.1.171.14.19.1.3.1.1.2 |
dCpuProtectProtoRLCntTotalCntThis object indicates the counter which counts the packets received by CPU (per unit/slot) for the protocol type.ro Counter64 .1.3.6.1.4.1.171.14.19.1.3.1.1.3 |
dCpuProtectProtoRLCntDropCntThis object indicates the counter which counts the dropped packets due to exceeding the configured rate-limit.ro Counter64 .1.3.6.1.4.1.171.14.19.1.3.1.1.4 |
dCpuProtectSubIntfRLCounterTableThis table consists of the traffic statistics by sub-interface. SEQUENCE OF DCpuProtectSubIntfRLCounterEntry .1.3.6.1.4.1.171.14.19.1.3.2 |
dCpuProtectSubIntfRLCounterEntryThe per unit traffic statistics about a sub-interface. Objects in this table are read-only and appear automatically whenever the value of dCpuProtectSubIntfRLRate of a row in the dCpuProtectSubIntfRLTable is not -1 (no-limit). DCpuProtectSubIntfRLCounterEntry .1.3.6.1.4.1.171.14.19.1.3.2.1 |
dCpuProtectSubIntfRLCntTypeThis object indicates the type of sub-interface. Enumeration .1.3.6.1.4.1.171.14.19.1.3.2.1.1 |
dCpuProtectSubIntfRLCntUnitIDThis object indicates the slot (for a chassis device) or unit number (for stacking device). For a standalone device, 0 is used for UnitID. UnitID .1.3.6.1.4.1.171.14.19.1.3.2.1.2 |
dCpuProtectSubIntfRLCntTotalCntThis object indicates the counter which counts the packets received by CPU (per unit/slot) for the subinterface.ro Counter64 .1.3.6.1.4.1.171.14.19.1.3.2.1.3 |
dCpuProtectSubIntfRLCntDropCntThis object indicates the counter which counts the dropped packets due to exceeding the configured rate-limit.ro Counter64 .1.3.6.1.4.1.171.14.19.1.3.2.1.4 |
dCpuProtectMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.19.2 |
dCpuProtectMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.19.2.1 |
dCpuProtectMIBComplianceThe compliance statement for entities which implement the DLINKSW-CPU-PROTECT-MIB. Unknown .1.3.6.1.4.1.171.14.19.2.1.1 |
dCpuProtectMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.19.2.2 |
dCpuProtectProtoGroupA collection of objects providing the configuration or statistics about the rate-limit of traffic destined to CPU by protocol type. Unknown .1.3.6.1.4.1.171.14.19.2.2.1 |
dCpuProtectSubIntfGroupA collection of objects providing the configuration or statistics about the rate-limit of traffic destined to CPU by sub-interface type. Unknown .1.3.6.1.4.1.171.14.19.2.2.2 |